Off-plane quartz-enhanced photoacoustic spectroscopy.

In this work, we developed off-plane quartz-enhanced photoacoustic spectroscopy (OP-QEPAS). In the OP-QEPAS the light beam went neither through the prong spacing of the quartz tuning fork (QTF) nor in the QTF plane. The light beam is in parallel with the QTF with an optimal distance, resulting in low background noise. A radial-cavity (RC) resonator was coupled with the QTF to enhance the photoacoustic signal by the radial resonance mode. By offsetting both the QTF and the laser position from the central axis, we enhance the effect of the acoustic radial resonance and prevent the noise generated by direct laser irradiation of the QTF. Compared to IP-QEPAS based on a bare QTF, the developed OP-QEPAS with a RC resonator showed a >10× signal-to-noise ratio (SNR) enhancement. The OP-QEPAS system has great advantages in the use of light emitting devices (LEDs), long-wavelength laser sources such as mid-infrared quantum cascade lasers, and terahertz sources. When employing a LED as the excitation source, the noise level was suppressed by ∼2 orders of magnitude. Furthermore, the radial and longitudinal resonance modes can be combined to further improve the sensor performance.

Ppbv-level mid-infrared photoacoustic sensor for mouth alcohol test after consuming lychee fruits.

A ppbv-level mid-infrared photoacoustic spectroscopy sensor was developed for mouth alcohol tests. A compact CO2 laser with a sealed waveguide and integrated radio frequency (RF) power supply was used. The emission wavelength is ∼9.3 µm with a power of 10 W. A detection limit of ∼18 ppbv (1σ) for ethanol gas with an integration of 1 s was achieved. The sensor performed a linear dynamic range with an R square value of ∼0.999. A breath measurement experiment after consuming lychees was conducted. The photoacoustic signal amplitude decreased with the quality of lychee consumed, confirming the existence of residual alcohol in the mouth. During continuous measurement, the photoacoustic signal decreased in < 10 min when consuming 30 g lychee fruits, proving that the alcohol detected in exhaled breath originated from the oral cavity rather than the bloodstream. This work provided valuable information on the distinction of alcoholism and crime.

Quartz-Enhanced Photoacoustic Spectroscopy-Conductance Spectroscopy for Gas Mixture Analysis.

A novel spectroscopic method, named quartz-enhanced photoacoustic spectroscopy-conductance spectroscopy (QEPAS-CS), was first developed for gas mixture analysis. In QEPAS-CS, the advantage of photoacoustic detection and conductance analysis was realized by a quartz tuning fork (QTF). Two-component gas analysis was done by photoacoustic detection and conductance detection. For an explicit application, natural spider silk was used as a water vapor transducer to modify the QTF, making a conductance sensing channel. A 2004 nm laser diode was used as an excitation source for a photoacoustic sensing channel. Such a QEPAS-CS sensor was used for H2O/CO2 gas mixture analysis in a cell incubator. This provides a solution to calibrate an infrared photoacoustic spectroscopy gas sensor. This example effectively confirms the capacity of multigas analysis by the QEPAS-CS sensor.

Side-excitation light-induced thermoelastic spectroscopy.

In this Letter, a side-excitation light-induced thermoelastic spectroscopy (SE-LITES) technique was developed for trace gas detection. A novel, to the best of our knowledge, custom quartz tuning fork (QTF) was used as a transducer for photon detection by the thermoelastic effect. The mechanical stress distribution on the QTF surface was analyzed to identify the optimum thermoelastic excitation approach. The electrode film on the QTF surface also works as a partially reflective layer to obtain a long optical absorption path inside the QTF body. With the long optical absorption length and the inner face excitation of the QTF, the thermoelastic effect was greatly enhanced. With an optimized modulation depth, a signal-to-noise ratio (SNR) improvement of more than one order of magnitude was achieved, compared to traditional LITES.

Clamp-type quartz tuning fork enhanced photoacoustic spectroscopy.

In this Letter, clamp-type quartz tuning fork enhanced photoacoustic spectroscopy (Clamp-type QEPAS) is proposed and realized through the design, realization, and testing of clamp-type quartz tuning forks (QTFs) for photoacoustic gas sensing. The clamp-type QTF provides a wavefront-shaped aperture with a diameter up to 1 mm, while keeping Q factors > 104. This novel, to the best of our knowledge, design results in a more than ten times increase in the area available for laser beam focusing for the QEPAS technique with respect to a standard QTF. The wavefront-shaped clamp-type prongs effectively improve the acoustic wave coupling efficiency. The possibility to implement a micro-resonator system for clamp-type QTF is also investigated. A signal-to-noise enhancement of ∼30 times has been obtained with a single-tube acoustic micro resonator length of 8 mm, ∼20% shorter than the dual-tube micro-resonator employed in a conventional QEPAS system.

Radial-cavity quartz-enhanced photoacoustic spectroscopy.

Radial-cavity quartz-enhanced photoacoustic spectroscopy (RC-QEPAS) was proposed for trace gas analysis. A radial cavity with (0,0,1) resonance mode was coupled with the quartz tuning fork (QTF) to greatly enhance the QEPAS signal and facilitate the optical alignment. The coupled resonance enhancement effects of the radial cavity and QTF were analyzed theoretically and researched experimentally. With an optimized radial cavity, the detection sensitivity of QEPAS was enhanced by >1 order of magnitude. The RC-QEPAS makes the acoustic detection module more compact and optical alignment comparable with a bare QFT, benefiting the usage of light sources with poor beam quality.