Whole-body vibration associated with underground coal mining equipment in Australia.

Environmental and logistical difficulties associated with obtaining whole-body vibration measurements from mobile equipment during operation in underground coal mines have hampered attempts to assess the potential vibration exposures associated with the use of such equipment. An alternative measurement technique was used to gather data from mobile equipment during normal operation at three low-methane coal mines and to estimate the possible magnitude of benefit of three control measures. 188 long duration measurements were obtained from shuttle cars (N = 142, median measurement duration = 3.2 h); personnel transport (N = 24, median measurement duration = 2.4 h); and materials transport vehicles (N = 22, median measurement duration = 1.8 h). Whole-body vibration amplitudes either within or exceeding the ISO health guidance caution zone were consistently measured. In particular, shuttle cars demonstrated whole-body vibration amplitudes which frequently exceeded the health guidance caution zone. The potential effects of roadway maintenance, decreased vehicle speed, and shuttle car seat replacement were found to be practically meaningful.

Whole-Body Vibration Associated with Dozer Operation at an Australian Surface Coal Mine.

Bulldozers are used extensively on surface mine sites and have been previously identified as being associated with high amplitude whole-body vibration exposures. Previous investigations of this equipment have involved either a very small number of measurements, or measurements of very short duration (or both); or the data obtained were incompletely reported. This research reports 69 measurements (median duration 440 min) obtained from 15 different dozers during operation at a surface coal mine. More than one-third of vertical vibration measurements exceeded the ISO2631.1 Health Guidance Caution Zone when expressed as VDV(8). Considerable variability in measurement amplitudes was found. This was also true within measurements obtained from the same dozers on different shifts suggesting, by a process of elimination, that the remaining variability in whole-body vibration amplitude is a function of some combination of task characteristics, geology, and operator behaviour; rather than equipment-related variability, such as maintenance, suspension, seating, or track design. Short-comings in the evaluation methods provided by ISO2631.1 are highlighted.

Long duration measurements of whole-body vibration exposures associated with surface coal mining equipment compared to previous short-duration measurements.

Previous measurements of whole-body vibration associated with earth-moving equipment at surface coal mines have highlighted the significance of the hazard. Considerable variability in measurement amplitudes, even within the same equipment type operated at the same site, has been noted. However, the measurements have previously been undertaken for relatively short durations. Fifty-nine measurements were collected from a range of earth-moving equipment in operation at a surface coal mine. Measurement durations ranged from 100-460 min (median = 340 min). The results indicate that the measurements previously observed are not an artifact of the relatively short durations and confirm that operators of dozers and off-road haul trucks, in particular, are frequently exposed to vertical whole-body vibration levels which lie within, or above, the Health Guidance Caution Zone defined by ISO2631.1. Further investigations are justified to identify opportunities for reducing operators' exposure to high amplitude vibrations.