Approaches to the Modification of Perfluorosulfonic Acid Membranes.

Polymer ion-exchange membranes are featured in a variety of modern technologies including separation, concentration and purification of gases and liquids, chemical and electrochemical synthesis, and hydrogen power generation. In addition to transport properties, the strength, elasticity, and chemical stability of such materials are important characteristics for practical applications. Perfluorosulfonic acid (PFSA) membranes are characterized by an optimal combination of these properties. Today, one of the most well-known practical applications of PFSA membranes is the development of fuel cells. Some disadvantages of PFSA membranes, such as low conductivity at low humidity and high temperature limit their application. The approaches to optimization of properties are modification of commercial PFSA membranes and polymers by incorporation of different additive or pretreatment. This review summarizes the approaches to their modification, which will allow the creation of materials with a different set of functional properties, differing in ion transport (first of all proton conductivity) and selectivity, based on commercially available samples. These approaches include the use of different treatment techniques as well as the creation of hybrid materials containing dopant nanoparticles. Modification of the intrapore space of the membrane was shown to be a way of targeting the key functional properties of the membranes.

Self-Phosphorylated Polybenzimidazole: An Environmentally Friendly and Economical Approach for Hydrogen/Air High-Temperature Polymer-Electrolyte Membrane Fuel Cells.

The development of phosphorylated polybenzimidazoles (PBI) for high-temperature polymer-electrolyte membrane (HT-PEM) fuel cells is a challenge and can lead to a significant increase in the efficiency and long-term operability of fuel cells of this type. In this work, high molecular weight film-forming pre-polymers based on N1,N5-bis(3-methoxyphenyl)-1,2,4,5-benzenetetramine and [1,1'-biphenyl]-4,4'-dicarbonyl dichloride were obtained by polyamidation at room temperature for the first time. During thermal cyclization at 330-370 °C, such polyamides form N-methoxyphenyl substituted polybenzimidazoles for use as a proton-conducting membrane after doping by phosphoric acid for H2/air HT-PEM fuel cells. During operation in a membrane electrode assembly at 160-180 °C, PBI self-phosphorylation occurs due to the substitution of methoxy-groups. As a result, proton conductivity increases sharply, reaching 100 mS/cm. At the same time, the current-voltage characteristics of the fuel cell significantly exceed the power indicators of the commercial BASF Celtec® P1000 MEA. The achieved peak power is 680 mW/cm2 at 180 °C. The developed approach to the creation of effective self-phosphorylating PBI membranes can significantly reduce their cost and ensure the environmental friendliness of their production.

A Series of Metal-Organic Frameworks with 2,2'-Bipyridyl Derivatives: Synthesis vs. Structure Relationships, Adsorption, and Magnetic Studies.

Five new metal-organic frameworks based on Mn(II) and 2,2'-bithiophen-5,5'-dicarboxylate (btdc2-) with various chelating N-donor ligands (2,2'-bipyridyl = bpy; 5,5'-dimethyl-2,2'-bipyridyl = 5,5'-dmbpy; 4,4'-dimethyl-2,2'-bipyridyl = 4,4'-dmbpy) [Mn3(btdc)3(bpy)2]·4DMF, 1; [Mn3(btdc)3(5,5'-dmbpy)2]·5DMF, 2; [Mn(btdc)(4,4;-dmbpy)], 3; [Mn2(btdc)2(bpy)(dmf)]·0.5DMF, 4; [Mn2(btdc)2(5,5'-dmbpy)(dmf)]·DMF, 5 (dmf, DMF = N,N-dimethylformamide) have been synthesized, and their crystal structure has been established using single-crystal X-ray diffraction analysis (XRD). The chemical and phase purities of Compounds 1-3 have been confirmed via powder X-ray diffraction, thermogravimetric, and chemical analyses as well as IR spectroscopy. The influence of the bulkiness of the chelating N-donor ligand on the dimensionality and structure of the coordination polymer has been analyzed, and the decrease in the framework dimensionality, as well as the secondary building unit's nuclearity and connectivity, has been observed for bulkier ligands. For three-dimensional (3D) coordination polymer 1, the textural and gas adsorption properties have been studied, revealing noticeable ideal adsorbed solution theory (IAST) CO2/N2 and CO2/CO selectivity factors (31.0 at 273 K and 19.1 at 298 K and 25.7 at 273 K and 17.0 at 298 K, respectively, for the equimolar composition and the total pressure of 1 bar). Moreover, significant adsorption selectivity for binary C2-C1 hydrocarbons mixtures (33.4 and 24.9 for C2H6/CH4, 24.8 and 17.7 for C2H4/CH4, 29.3 and 19.1 for C2H2/CH4 at 273 K and 298 K, respectively, for the equimolar composition and the total pressure of 1 bar) has been observed, making it possible to separate on 1 natural, shale, and associated petroleum gas into valuable individual components. The ability of Compound 1 to separate benzene and cyclohexane in a vapor phase has also been analyzed based on the adsorption isotherms of individual components measured at 298 K. The preferable adsorption of C6H6 over C6H12 by 1 at high vapor pressures (VB/VCH = 1.36) can be explained by the existence of multiple van der Waals interactions between guest benzene molecules and the metal-organic host revealed by the XRD analysis of 1 immersed in pure benzene for several days (1≅2C6H6). Interestingly, at low vapor pressures, an inversed behavior of 1 with preferable adsorption of C6H12 over C6H6 (KCH/KB = 6.33) was observed; this is a very rare phenomenon. Moreover, magnetic properties (the temperature-dependent molar magnetic susceptibility, χp(T) and effective magnetic moments, µeff(T), as well as the field-dependent magnetization, M(H)) have been studied for Compounds 1-3, revealing paramagnetic behavior consistent with their crystal structure.

Enhanced Adsorption Selectivity of Carbon Dioxide and Ethane on Porous Metal-Organic Framework Functionalized by a Sulfur-Rich Heterocycle.

Porous metal-organic framework [Zn2(ttdc)2(bpy)] (1) based on thieno [3,2-b]thiophenedicarboxylate (ttdc) was synthesized and characterized. The structure contains intersected zig-zag channels with an average aperture of 4 × 6 Å and a 49% (v/v) guest-accessible pore volume. Gas adsorption studies confirmed the microporous nature of 1 with a specific surface area (BET model) of 952 m2·g-1 and a pore volume of 0.37 cm3·g-1. Extensive CO2, N2, O2, CO, CH4, C2H2, C2H4 and C2H6 gas adsorption experiments at 273 K and 298 K were carried out, which revealed the great adsorption selectivity of C2H6 over CH4 (IAST selectivity factor 14.8 at 298 K). The sulfur-rich ligands and double framework interpenetration in 1 result in a dense decoration of the inner surface by thiophene heterocyclic moieties, which are known to be effective secondary adsorption sites for carbon dioxide. As a result, remarkable CO2 adsorption selectivities were obtained for CO2/CH4 (11.7) and CO2/N2 (27.2 for CO2:N2 = 1:1, 56.4 for CO2:N2 = 15:85 gas mixtures). The computational DFT calculations revealed the decisive role of the sulfur-containing heterocycle moieties in the adsorption of CO2 and C2H6. High CO2 adsorption selectivity values and a relatively low isosteric heat of CO2 adsorption (31.4 kJ·mol-1) make the porous material 1 a promising candidate for practical separation of biogas as well as for CO2 sequestration from flue gas or natural gas.

On the Properties of Nafion Membranes Recast from Dispersion in N-Methyl-2-Pyrrolidone.

Perfluorosulfonic acid Nafion membranes are widely used as an electrolyte in electrolysis processes and in fuel cells. Changing the preparation and pretreatment conditions of Nafion membranes allows for the optimization of their properties. In this work, a Nafion-NMP membrane with a higher conductivity than the commercial Nafion® 212 membrane (11.5 and 8.7 mS∙cm-1 in contact with water at t = 30 °C) and a comparable hydrogen permeability was obtained by casting from a Nafion dispersion in N-methyl-2-pyrrolidone. Since the ion-exchange capacity and the water uptake of these membranes are similar, it can be assumed that the increase in conductivity is the result of optimizing the Nafion-NMP microstructure by improving the connectivity of the pores and channels system. This leads to a 27% increase in the capacity of the membrane electrode assembly with the Nafion-NMP membrane compared to the Nafion® 212 membrane. Thus, the method of obtaining a Nafion membrane has a great influence on its properties and performance of fuel cells based on them.

Effect of Organo-Silanes Structure on the Properties of Silane-Crosslinked Membranes Based on Cardo Polybenzimidazole PBI-O-PhT.

Polybenzimidazoles (PBI) doped with phosphoric acid (PA) are promising electrolytes for medium temperature fuel cells. Their significant disadvantage is a partial or complete loss of mechanical properties and an increase in hydrogen permeability at elevated temperatures. Covalent silanol crosslinking is one possible way to stabilize PBI membranes in the presence of PA. Three organo-substituted silanes, namely (3-Bromopropyl)trimethoxysilane (SiBr), trimethoxy [2-(7-oxabicyclo [4.1.0]hept-3-yl)ethyl]silane (Si-biC) and (3-Glycidyloxypropyl)trimethoxysilane (KH 560), were used as covalent crosslinkers of PBI-O-PhT in order to determine the effect of the silane structure and crosslinking degree on membrane properties. The crosslinking degree was 1-50%. All crosslinked membranes were characterized by impedance and IR-spectroscopy. The mechanical properties, morphology, stability and hydrogen permeability of the membranes were determined. In the case of silanes with linear substituents (SiBr, KH 560), a denser structure is formed, which is characterized by greater oxidative stability and lower hydrogen permeability in comparison to the silane with a bulk group. All the crosslinked membranes have a higher mechanical strength compared with the initial PBI-O-PhT membrane both before and after doping with PA. Despite the hardening of the polymer matrix of the membranes, their proton conductivity changes insignificantly. It was shown that cross-linked membranes can be used in fuel cells.

Cardo Polybenzimidazole (PBI-O-PhT) Based Membrane Reinforced with m-polybenzimidazole Electrospun Nanofiber Mat for HT-PEM Fuel Cell Applications.

The further development of high temperature polymer electrolyte membrane (HT-PEM) fuel cells largely depends on the improvement of all components of the membrane-electrode assembly (MEA), especially membranes and electrodes. To improve the membrane characteristics, the cardo-polybenzimidazole (PBI-O-PhT)-based polymer electrolyte complex doped with phosphoric acid is reinforced using an electrospun m-PBI mat. As a result, the PBI-O-PhT/es-m-PBInet · nH3PO4 reinforced membrane is obtained with hydrogen crossover values (~0.2 mA cm-2 atm-1), one order of magnitude lower than the one of the initial PBI-O-PhT membrane (~3 mA cm-2 atm-1) during HT-PEM fuel cell operation with Celtec®P1000 electrodes at 180 °C. Just as importantly, the reinforced membrane resistance was very close to the original one (65-75 mΩ cm2 compared to ~60 mΩ cm2). A stress test that consisted of 20 start-stops, which included cooling to the room temperature and heating back to 180 °C, was applied to the MEAs with the reinforced membrane. More stable operation for the HT-PEM fuel cell was shown when the Celtec®P1000 cathode (based on carbon black) was replaced with the carbon nanofiber cathode (based on the pyrolyzed polyacrylonitrile electrospun nanofiber mat). The obtained data confirm the enhanced characteristics of the PBI-O-PhT/es-m-PBInet · nH3PO4 reinforced membrane.

3D Metal-Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis, Crystal Structures, Gas Adsorption, and Magnetic Properties.

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2'-bithiophen-5,5'-dicarboxylate (btdc2-) [Co3(btdc)3(bpy)2]·4DMF, 1; [Co3(btdc)3(pz)(dmf)2]·4DMF·1.5H2O, 2; [Co3(btdc)3(dmf)4]∙2DMF∙2H2O, 3 (bpy = 2,2'-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co3(RCOO)6}, connected either by btdc2- ligands (1, 3) or by both btdc2- and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N2, O2, CO, CO2, CH4 adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m2⋅g-1 and promising gas separation performance with selectivity factors up to 35.7 for CO2/N2, 45.4 for CO2/O2, 20.8 for CO2/CO, and 4.8 for CO2/CH4. The molar magnetic susceptibilities χp(T) were measured for 1 and 2 in the temperature range 1.77-330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are µeff (300 K) ≈ 4.93 µB. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.

A Series of Mesoporous Metal-Organic Frameworks with Tunable Windows Sizes and Exceptionally High Ethane over Ethylene Adsorption Selectivity.

The NIIC-20 (NIIC stands for Nikolaev Institute of Inorganic Chemistry) is a family of five isostructural metal-organic frameworks (MOFs) based on dodecanuclear wheel-shaped carboxylate building blocks {Zn12 (RCOO)12 (glycol)6 } (glycol is deprotonated diatomic alcohol: ethylene glycol, 1,2-propanediol, 1,2-butanediol, 1,2-pentanediol or glycerol), quantitatively crystallized from readily available starting chemicals. The crystal structures contain large mesoporous cages of 25 Šconnected through {Zn12 } rings, of which inner diameter and chemical nature depend solely on the chosen glycol. The NIIC-20 compounds feature high surface area and rarely observed inversed adsorption affinity for saturated hydrocarbon (ethane) over the unsaturated ones (ethylene, acetylene). The corresponding IAST (Ideal Adsorbed Solution Theory) adsorption selectivity factors reach as much as 15.4 for C2 H6 /C2 H4 and 10.9 for C2 H6 /C2 H2 gas mixtures at ambient conditions, exceeding those for any other porous MOF reported so far. The remarkable combination of high adsorption uptakes and high adsorption selectivities makes the NIIC-20 series a new benchmark of porous materials designed for ethylene separation applications.

Tuning the Molecular and Cationic Affinity in a Series of Multifunctional Metal-Organic Frameworks Based on Dodecanuclear Zn(II) Carboxylate Wheels.

A series of new zinc(II)-thiophene-2,5-dicarboxylate (tdc) MOFs based on novel dodecanuclear wheel-shaped building blocks has been synthesized in almost quantative yields. Single-crystal X-ray diffraction analyses reveal 3D porous frameworks with a complex composition [Zn12(tdc)6(glycolate)6(dabco)3] where glycolate is a deprotonated polyatomic alcohol (ethylene glycol, EgO2, 1; 1,2-propanediol, PrO2, 2; 1,2-butanediol, BuO2, 3; 1,2-pentanediol, PeO2, 4; glycerol, GlO2, 5) and dabco is 1,4-diazo[2.2.2.]bicyclooctane. All compounds 1-5 are isostructural except for pendant groups of the diols decorating the surface of channels. The adsorption of small gases (N2, CO2, CH4, C2H2, C2H4, C2H6) and larger hydrocarbons (benzene, cyclohexane) both in liquid and vapor phases was thoroughly investigated for all compounds. The zero-coverage adsorption enthalpies, Henry constants, and selectivity factors by various models are calculated and discussed. The versatile adsorption functionality of the title series results from the variable nature of the diol and could be tailored for a specific adsorbate system. For example, 1 shows excellent selectivity of benzene over cyclohexane (20:1 for vapors, 92:1 for liquid phase), while 4 demonstrates unprecedented adsorption preference of cyclohexane over benzene (selectivity up to 5:1). The compound 5 demonstrates great adsorption selectivity for CO2/N2 (up to 75.1), CO2/CH4 (up to 7.7), C2H2/CH4 (up to 14.2), and C2H4/CH4 (up to 9.4). Also, due to polar nature of the pores, 5 features size-selective sorption of alkaline metal cations in order Li+ > Na+ > K+ > Cs+ as well as a notable luminescent response for cesium(I) ions and urea.

Quantitative temperature mapping within an operating catalyst by spatially resolved 27Al NMR.

Spatially resolved NMR is employed to quantitatively map the temperature of a solid catalyst under operating conditions during H(2) oxidation with O(2) over Pt/γ-Al(2)O(3). As this new non-invasive in situ technique utilizes the (27)Al NMR signal of the solid phase, it is suitable for catalyst temperature mapping in both liquid- and gas-phase heterogeneous catalytic processes.

Magnetic resonance imaging methods for in situ studies in heterogeneous catalysis.

Magnetic resonance imaging (MRI) is a very powerful instrument used extensively in modern medical diagnostics because of its ability to look inside a body in a non-invasive and non-destructive way. Furthermore, MRI is more than just a single tool for extracting structural information. It is more of a sophisticated and versatile toolkit able to provide all sorts of useful information about the internal properties of an object under study and various processes within it, including heat and mass transport, composition and chemical transformations, in a spatially resolved mode. While a living body is different from a catalyst body or a reactor, the in situ and Operando studies in catalysis can clearly benefit from the use of this non-destructive toolkit as a powerful complement to other available spectroscopic tools. This tutorial review gives an introduction to the field and describes the examples of the applications of MRI to the studies of the preparation, deactivation and regeneration of solid catalysts and to the spectroscopy, thermometry and imaging studies of heterogeneous catalysts and model catalytic reactors performed during actual catalytic processes.

Magnetic resonance imaging studies on catalyst impregnation processes: discriminating metal ion complexes within millimeter-sized gamma-Al2O3 catalyst bodies.

Magnetic resonance imaging (MRI) was used to study the impregnation step during the preparation of Ni/gamma-Al(2)O(3) hydrogenation catalysts with Ni(2+) metal ion present in different coordinations. The precursor complexes were [Ni(H(2)O)(6)](2+) and [Ni(edtaH(x))]((2-x)-) (where x = 0, 1, 2 and edta = ethylenediaminetetraacetic acid), representing a nonshielded and a shielded paramagnetic complex, respectively. Due to this shielding effect of the ligands, the dynamics of [Ni(H(2)O)(6)](2+) or [Ni(edtaH(x))]((2-x)-) were visualized applying T(2) or T(1) image contrast, respectively. MRI was applied in a quantitative manner to calculate the [Ni(H(2)O)(6)](2+) concentration distribution after impregnation when it was present alone in the impregnation solution, or together with the [Ni(edtaH(x))]((2-x)-) species. Moreover, the combination of MRI with UV-vis microspectroscopy allowed the visualization of both species with complementary information on the dynamics and adsorption/desorption phenomena within gamma-Al(2)O(3) catalyst bodies. These phenomena yielded nonuniform Ni distributions after impregnation, which are interesting for certain industrial applications.

Biopolymer and water dynamics in microbial biofilm extracellular polymeric substance.

Nuclear magnetic resonance (NMR) is a noninvasive and nondestructive tool able to access several observable quantities in biofilms such as chemical composition, diffusion, and macroscale structure and transport. Pulsed gradient spin echo (PGSE) NMR techniques were used to measure spectrally resolved biomacromolecular diffusion in biofilm biomass, extending previous research on spectrally resolved diffusion in biofilms. The dominant free water signal was nulled using an inversion recovery modification of the traditional PGSE technique in which the signal from free water is minimized in order to view the spectra of components such as the rotationally mobile carbohydrates, DNA, and proteins. Diffusion data for the major constituents obtained from each of these spectral peaks demonstrate that the biomass of the biofilm contains both a fast and slow diffusion component. The dependence of diffusion on antimicrobial and environmental challenges suggests the polymer molecular dynamics measured by NMR are a sensitive indicator of biofilm function.

Spatially resolved NMR thermometry of an operating fixed-bed catalytic reactor.

An MRI-based approach for the thermometry of an operating packed-bed catalytic reactor was implemented. It was employed for the spatially resolved NMR thermometry of the bed of Pd/gamma-Al2O3 catalyst beads in the course of propylene hydrogenation reaction. This was achieved by detecting the spatially resolved axial 1D profiles of the 27Al NMR signal intensity of Al2O3 in the course of the reaction. The experimental results demonstrate a clear correlation between the 27Al NMR signal intensity and the catalyst temperature measured with a thermocouple (25-250 degrees C), and reveal the existence of pronounced temperature gradients along the catalyst bed.

Monitoring transport phenomena of paramagnetic metal-ion complexes inside catalyst bodies with magnetic resonance imaging.

An indirect magnetic resonance imaging (MRI) method has been developed to determine in a noninvasive manner the distribution of paramagnetic Co2+ complexes inside Co/Al2O3 catalyst extrudates after impregnation with Co2+/citrate solutions of different pH and citrate concentrations. UV/Vis/NIR microspectroscopic measurements were carried out simultaneously to obtain complementary information on the nature of the Co2+ complexes. In this way, it could be confirmed that the actual distribution of Co2+ inside the extrudates could be derived from the MRI images. By combining these space- and time-resolved techniques, information was obtained on both the strength and the mode of interaction between [Co(H2O)6]2+ and different Co2+ citrate complexes with the Al2O(3) support. Complexation of Co2+ by citrate was found to lead to a stronger interaction of Co with the support surface and formation of an eggshell distribution of Co2+ complexes after impregnation. By addition of free citrate and by changing the pH of the impregnation solution, it was possible to obtain the rather uncommon egg-yolk and egg-white distributions of Co2+ inside the extrudates after impregnation. In other words, by carefully altering the chemical composition and pH of the impregnation solution, the macrodistribution of Co2+ complexes inside catalyst extrudates could be fine-tuned from eggshell over egg white and egg yolk to uniform.

Noninvasive in situ visualization of supported catalyst preparations using multinuclear magnetic resonance imaging.

Multinuclear magnetic resonance imaging (MRI) is employed as a new noninvasive tool for monitoring supported catalyst preparation by visualizing precursor transport within the porous support. In particular, liquid phase 31P MRI experiments were used to visualize the dynamics of H3PO4 penetration into an alumina pellet and have revealed a strong interaction of H3PO4 with the support. Solid state 31P MRI was applied to map the distribution of the adsorbed phosphate inside the support after its drying. Comparison of the liquid phase and solid phase MRI results confirms the correlation of the phosphate distribution in the liquid phase during impregnation and the phosphate adsorbed on the support. The possibility to monitor the transport of metal atoms within the support by a direct detection of their NMR signal is demonstrated for 195Pt nucleus during impregnation of an alumina pellet with an aqueous solution of H2PtCl6. Other possible strategies for the utilization of MRI to characterize in situ the preparation of supported catalysts and other supported materials are briefly discussed.

Functional MRI and NMR spectroscopy of an operating gas-liquid-solid catalytic reactor.

A dynamic in situ study of alpha-methylstyrene catalytic hydrogenation on a single catalyst pellet or in a granular bed is performed using 1H MRI and spatially resolved 1H NMR spectroscopy. Owing to reaction exothermicity, a reciprocating motion of the liquid front within the pellet accompanied by pellet temperature oscillations has been observed. Spatially resolved information on the reactant to product conversion within the catalyst bed has been obtained for a steady-state regime. Two-dimensional 27Al NMR images of alumina catalyst supports and other alumina-containing materials have been detected using moderate magnetic field gradients (80 G/cm) and a two-pulse spin-echo sequence. Temperature dependence of signal intensity and 27Al T1 time of alumina are considered as possible temperature sensors for NMR thermometry applications.

NMR imaging of the distribution of the liquid phase in a catalyst pellet during alpha-methylstyrene evaporation accompanied by its vapor-phase hydrogenation.

This communication reports the first application of NMR imaging to study the progress of a multiphase heterogeneous catalytic reaction in situ. Various stationary regimes of alpha-methylstyrene (AMS) hydrogenation on a single Pt/gamma-Al2O3 catalyst pellet have been investigated. The two-dimensional maps of the liquid-phase distribution within the pellet have been obtained in the course of the catalytic reaction, with the pellet temperature rising up to 185 degrees C. The large liquid-phase concentration gradients have been shown to exist under conditions of liquid AMS evaporation accompanied by its vapor-phase hydrogenation. It has been demonstrated that despite a substantial broadening of the NMR lines of liquids permeating porous solids the quantification of the relative amounts of AMS and the major reaction product cumene with spatial resolution across the pellet is feasible.