A simple approach to produce hydrophobic biobased coatings using methylcellulose and organosolv lignin.

Substituting plastics with circular and sustainable alternatives has increasingly become a priority. Protective coatings, crucial components in numerous industries, are now in demand for biodegradable options to replace their plastic-based counterparts. Being one of nature's most abundant components, lignin remains underutilized, and this study focuses on investigating its potential for the production of biobased coatings. The method used here involved formulating coating suspensions by mixing methylcellulose and organosolv lignin powders and adding water to the mixture. Glass wafers were coated with the formulated suspensions using spin-coating. The morphology of the coated surfaces was assessed using optical and scanning electron microscopy. In addition, the wettability of the surfaces was examined through water contact angle experiments, and a numerical model was introduced to predict the water contact angle evolution over time. The results revealed that the sample coated with a 2.5 wt% lignin suspension exhibited the highest initial contact angle (114°), with a decreasing trend as the lignin fraction increases. Moreover, coatings with 3.5 wt% lignin and above exhibited lower surface coverage due to lignin particle aggregation and surface defects. By approximating the water droplet on the surface as a spherical cap, the introduced numerical model successfully predicted the time-dependent evolution of the water contact angle by showing strong alignment with experimental results. Taken altogether, we have showcased here a method for modifying coating properties-in a practical sense from water-absorbent to splash-proof-using readily available forest-based materials. This advancement is paving the way for sustainable protective packaging, aiming to replace styrofoam in the electronics and food industries.

Scalable method for bio-based solid foams that mimic wood.

Mimicking natural structures allows the exploitation of proven design concepts for advanced material solutions. Here, our inspiration comes from the anisotropic closed cell structure of wood. The bubbles in our fiber reinforced foam are elongated using temperature dependent viscosity of methylcellulose and constricted drying. The oriented structures lead to high yield stress in the primary direction; 64 times larger than compared to the cross direction. The closed cells of the foam also result in excellent thermal insulation. The proposed novel foam manufacturing process is trivial to up-scale from the laboratory trial scale towards production volumes on industrial scales.

Propagating bands of plastic deformation in a metal alloy as critical avalanches.

The plastic deformation of metal alloys localizes in the Portevin-Le Chatelier effect in bands of different types, including propagating, or type "A" bands, usually characterized by their width and a typical propagation velocity. This plastic instability arises from collective dynamics of dislocations interacting with mobile solute atoms, but the resulting sensitivity to the strain rate lacks fundamental understanding. Here, we show, by using high-resolution imaging in tensile deformation experiments of an aluminum alloy, that the band velocities exhibit large fluctuations. Each band produces a velocity signal reminiscent of crackling noise bursts observed in numerous driven avalanching systems from propagating cracks in fracture to the Barkhausen effect in ferromagnets. The statistical features of these velocity bursts including their average shapes and size distributions obey predictions of a simple mean-field model of critical avalanche dynamics. Our results thus reveal a previously unknown paradigm of criticality in the localization of deformation.

Crossover from mean-field compression to collective phenomena in low-density foam-formed fiber material.

We study the compression of low-weight foam-formed materials made out of wood fibers. Initially the stress-strain behavior follows mean-field like response, related to the buckling of fiber segments as dictated by the random three-dimensional geometry. Our Acoustic Emission (AE) measurements correlate with the predicted number of segment bucklings for increasing strain. However, the experiments reveal a transition to collective phenomena as the strain increases sufficiently. This is also seen in the gradual failure of the theory to account for the stress-strain curves. The collective avalanches exhibit scale-free features both as regards the AE energy distribution and the AE waiting time distributions with both exponents having values close to 2. In cyclic compression tests, significant increases in the accumulated acoustic energy are found only when the compression exceeds the displacement of the previous cycle, which further confirms other sources of acoustic events than fiber bending.

Crack growth and energy dissipation in paper.

Here, we follow the stable propagation of a roughening crack using simultaneously Digital Image Correlation and Infra-Red imaging. In a quasi-two-dimensional paper sample, the crack tip and ahead of that the fracture process zone follow the slowly, diffusively moving "hot spot" ahead of the tip. This also holds when the crack starts to roughen during propagation. The well-established intermittency of the crack advancement and the roughening of the crack in paper are thus subject to the dissipation and decohesion in the hot spot zone. They are therefore not only a result of the depinning of the crack in a heterogeneous material.

Preservation of fatty acid signatures in three vertebrate species after six months of storage at various temperatures.

Fatty acid (FA) signatures (FAS) are important tools to assess the foraging ecology of wild animals. The present study was conducted to assess how well the general FAS and the proportions of individual FA are preserved in fat samples stored at different temperatures (-196, -80, -20, +4 and +20°C). Using three species (laboratory rat, American mink and rainbow trout), FAS were determined immediately upon sampling. Thereafter, eight subsamples per storage temperature from the inner part of the sample unaffected by oxygen and light were re-analyzed after 1, 2, 3, 7, 28, 84 and 168 days. Each time the remaining sample was sealed in its vial after replacing air with nitrogen gas. The results were tested with the mixed model and discriminant analyses. Generally, the FAS were well preserved regardless of storage temperature, and only a few major FA showed significant changes even after the 6-month period at room temperature. After an initial first-day change in proportions, presumably due to post-mortem enzymatic activities, the remaining minor changes could not be clearly attributed to either further autolysis, decomposition or autoxidation. In the discriminant analysis, the species-specific differences dominated and remained distinct even after 6 months. Furthermore, the analysis mostly classified the samples preserved at sub- and above-freezing temperatures separate from each other, and the general deviation from the initial analysis results was present as early as after 1 day. If FAS are to be analyzed in a very precise manner, the analysis should be performed immediately upon sampling. However, FAS remain adequately reliable for long periods of time even without preservation in deep freeze, widening the availability of potential samples for studies on foraging ecology and related disciplines.

Muscular, cardiorespiratory and thermal strain of mast and pole workers.

This field study evaluated the level of muscular, cardiorespiratory and thermal strain of mast and pole workers. We measured the muscular strain using electromyography (EMG), expressed as a percentage in relation to maximal EMG activity (%MEMG). Oxygen consumption (VO2) was indirectly estimated from HR measured during work and expressed as a percentage of maximum VO2 (%VO2max). Skin and deep body temperatures were measured to quantify thermal strain. The highest average muscular strain was found in the wrist flexor (24 ± 1.5%MEMG) and extensor (21 ± 1.0%MEMG) muscles, exceeding the recommendation of 14%MEMG. Average cardiorespiratory strain was 48 ± 3%VO2max. Nearly half (40%) of the participants exceeded the recommended 50%VO2max level. The core body temperature varied between 36.8°C and 37.6°C and mean skin temperature between 28.6°C and 33.4°C indicating possible occasional superficial cooling. Both muscular and cardiorespiratory strain may pose a risk of local and systemic overloading and thus reduced work efficiency. Thermal strain remained at a tolerable level.

Firefighters muscular recovery after a heavy work bout in the heat.

Occasionally firefighters need to perform very heavy bouts of work, such as smoke diving or clearing an accident site, which induce significant muscle fatigue. The time span for muscular recovery from such heavy work is not known. The purpose of this study was to evaluate firefighters' force-, neural-, metabolic-, and structural-related recovery after task-specific heavy work in the heat. Fifteen healthy firefighters (14 males and 1 female) performed a 20-min heavy work bout that simulated smoke diving and the clearance of an accident site at 35 °C. After the work, muscular recovery was evaluated by wrist flexion maximal voluntary contraction (MVC), average electromyography during MVC and during 10%MVC, rate of force production, motor response and stretch reflex responses, muscle oxygen consumption and oxygenation level, and wrist flexor muscle pennation angle. Recovery was followed for 4 h. Each of the 12 measured parameters changed significantly (p < 0.05) from those at baseline during the follow-up. Muscle oxygen consumption and the wrist flexor pennation angle remained elevated throughout the follow-up (oxygen consumption baseline, 12.9 ± 1.7 mL O2·min(-1)·(100 g)(-1); 4-h value, 17.5 ± 1.6 mL O2·min(-1)·(100 g)(-1); p < 0.05 and pennation angle baseline, 15.7 ± 0.8°; 4-h value, 17.8 ± 0.8°; p < 0.05). Muscle reoxygenation rate was elevated for up to 2 h (baseline, 2.3 ± 0.4 µmol·L(-1)·min(-1); 2-h value, 3.4 ± 0.4 µmol·L(-1)·min(-1); p < 0.05). The other 9 parameters recovered (were no longer significantly different from baseline) after 20 to 60 min. We concluded that the recovery order in main components of muscle function from fastest to slowest was force, neural, metabolic, and structural.

From the subarctic to the tropics: effects of 4-month deployment on soldiers' heat stress, heat strain, and physical performance.

The aim of the study was to evaluate the heat stress of Finnish male soldiers (N = 20, age 22.0 ± 2.5 years, body mass 78.8 ± 11.5 kg, and height 180.2 ± 5.6 cm) during their 4-month deployment in a hot environment and to find out the effects on physical performance and body composition. The troops moved from 2.5° C (mean monthly temperature) in Finland to 31.9° C in Chad. During the deployment, temperatures varied between 13.5 and 57.0° C outdoors and in the vehicles and tents. During 1-day recording in the middle of the deployment, skin temperatures were 34-35° C during daytime and maximal core temperature remained mainly below 38.0° C. Body mass decreased (78.4 ± 11.5 kg vs. 75.6 ± 8.6, p = 0.007) during the deployment without changes in fat mass. The sit-up performance increased by 10.9% (46 ± 10 reps·min⁻¹ vs. 51 ± 7 reps·min⁻¹, p < 0.01), and the maximal force production of the leg extensor muscles increased (3,042 ± 614 N vs. 3,277 ± 706 N, p < 0.05) without change in the rate of force development. No changes were observed in the push-ups, repeated squats, maximal grip strength, and running distance during the 12-minute test. In conclusion, the soldiers were able to maintain or improve their physical performance during the deployment despite the heat stress. It is important to encourage soldiers to engage in physical training, especially during a thermally appropriate time of the day or in air-conditioned facilities. Monitoring of local heat stress is also recommended.

Thermal effects of mobile phone RF fields on children: a provocation study.

The aim of this study was to examine thermal and local blood flow responses in the head area of the preadolescent boys during exposure to radiofrequency (RF) electromagnetic fields produced by a GSM mobile phone. The design was a double-blinded sham-controlled study of 26 boys, aged 14-15 years. The SAR distribution was calculated and modelled in detail. The duration of the sham periods and exposures with GSM 900 phone was 15 min each, and the tests were carried out in a climatic chamber in controlled thermoneutral conditions. The ear canal temperatures were registered from both ear canals, and the skin temperatures at several sites of the head, trunk and extremities. The local cerebral blood flow was monitored by a near-infrared spectroscopy (NIRS), and the autonomic nervous system function by recordings of ECG and continuous blood pressure. During the short-term RF exposure, local cerebral blood flow did not change, the ear canal temperature did not increase significantly and autonomic nervous system was not interfered. The strengths of this study were the age of the population, multifactorial physiological monitoring and strictly controlled thermal environment. The limitations of the study were large inter-individual variation in the physiological responses, and short duration of the exposure. Longer provocation protocols, however, might cause in children distress related confounding physiological responses.

The effect of training of military skills on performance in cold environment.

This study was conducted to evaluate how training for disassembling and assembling a weapon and patrol data message terminal and loading a magazine in different temperatures affected the ability to perform those skills in a cold environment. One group trained six times on separate days in a warm environment (19 degrees C), the second group trained three times in a warm environment and then three times in a cold environment (-15 degrees C), and the third group trained six times in the cold environment. Training first in warm and then in cold shortened performance time by 6% to 28%, in comparison to training only in a warm environment. Also, training in cold made the subjects faster than training in warm. In conclusion, before performing military operations in a cold environment, it is most beneficial to train first in warm and then in cold. Training only in warm produces the lowest level of performance in a cold environment.

Face cooling by cold wind in walking subjects.

The effects of low to moderate wind speeds on face temperature, thermal and pain sensations while subjects walked on a treadmill during cold exposure were studied in eight healthy men. The purpose of the study was to evaluate further the risk of frostbite at different activity levels. The walking speed was 2.8 km h(-1) and two inclination levels were used, 0 degrees and 6 degrees. The subjects were exposed to -10 degrees C and 0, 1 or 5 m s(-1) wind for 60 min dressed in cold-protective clothing with only the face unprotected. Results from previous experiments with the same subjects standing for 30 min were included in the analysis of the data. Each individual was exposed to all combinations of air velocity and activity level. The exposure to -10 degrees C and the highest wind speed used would carry no risk of frostbite according to the wind chill index. Cold lowered the skin temperature of the face significantly and wind further increased skin cooling. The activity level did not affect forehead and cheek temperatures, but the average nose skin temperature was higher and pain sensations were reduced at a higher work rate. The predicted risk of frostbite in the nose, based on average responses, would thus be less at a higher work rate. However, the results indicate that exercise does not necessarily protect all individuals from frostbite at moderate air speeds, since the nose skin temperature of 25% of the subjects dropped to 0 degrees C at 5 m s(-1) during both standing and walking. Thus the potential individual risk of frostbite in the nose is similar during light exercise and standing. Moreover, the risk of frostbite seems to be underestimated by the wind chill index under the conditions tested in this study.