Association of defects of enamel with polymorphisms in the vitamin D receptor and parathyroid hormone genes.

This cross-sectional study aimed to investigate the association between developmental defects of enamel (DDE) and single nucleotide polymorphisms (SNPs) in the genes encoding the vitamin D receptor (VDR) and parathyroid hormone (PTH). Orthodontic patients receiving treatment at a dental school were selected through convenience sampling. Intra-oral photographs were used to assess DDE, which were classified according to the criteria proposed by Ghanim et al. (2015) by a single calibrated examiner (Kappa>0.80). Enamel hypoplasia, molar-incisor hypomineralization (MIH), hypomimineralized second primary molar (HSPM), and non-MIH/HSPM demarcated opacities were considered for the analysis. Genomic DNA was extracted from buccal cells. The SNPs in VDR (rs7975232) and PHT (rs694, rs6256, and rs307247) were genotyped using real-time polymerase chain reactions (PCR). Statistical analyses were performed using the PLINK software (version 1.03, designed by Shaun Purcell, EUA). Chi-square or Fisher's exact tests were performed at a significance level of 5%. Ninety-one (n=91) patients (49 females and 42 males) (mean age of 14.1±5.8 years) were included. The frequency of DDE was 38.5% (35 patients). Genotype distributions were in Hardy-Weinberg equilibrium. No significant statistical association was found between DDE and the SNPs evaluated. A borderline association (p=0.09) was observed between DDE and the CC haplotype for SNP rs7975232 in VDR. In conclusion, the selected SNPs in VDR and PTH genes were not associated with DDE in the studied samples.

Single Nucleotide Polymorphisms in RUNX2 and BMP2 contributes to different vertical facial profile.

The vertical facial profile is a crucial factor for facial harmony with significant implications for both aesthetic satisfaction and orthodontic treatment planning. However, the role of single nucleotide polymorphisms (SNPs) in the development of vertical facial proportions is still poorly understood. This study aimed to investigate the potential impact of some SNPs in genes associated with craniofacial bone development on the establishment of different vertical facial profiles. Vertical facial profiles were assessed by two senior orthodontists through pre-treatment digital lateral cephalograms. The vertical facial profile type was determined by recommended measurement according to the American Board of Orthodontics. Healthy orthodontic patients were divided into the following groups: "Normodivergent" (control group), "Hyperdivergent" and "Hypodivergent". Patients with a history of orthodontic or facial surgical intervention were excluded. Genomic DNA extracted from saliva samples was used for the genotyping of 7 SNPs in RUNX2, BMP2, BMP4 and SMAD6 genes using real-time polymerase chain reactions (PCR). The genotype distribution between groups was evaluated by uni- and multivariate analysis adjusted by age (alpha = 5%). A total of 272 patients were included, 158 (58.1%) were "Normodivergent", 68 (25.0%) were "Hyperdivergent", and 46 (16.9%) were "Hypodivergent". The SNPs rs1200425 (RUNX2) and rs1005464 (BMP2) were associated with a hyperdivergent vertical profile in uni- and multivariate analysis (p-value < 0.05). Synergistic effect was observed when evaluating both SNPs rs1200425- rs1005464 simultaneously (Prevalence Ratio = 4.0; 95% Confidence Interval = 1.2-13.4; p-value = 0.022). In conclusion, this study supports a link between genetic factors and the establishment of vertical facial profiles. SNPs in RUNX2 and BMP2 genes were identified as potential contributors to hyperdivergent facial profiles.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study.

OBJECTIVE: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. METHODS: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. RESULTS: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. CONCLUSIONS: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

Mandibular and dental measurements for sex determination using machine learning.

The present study tested the combination of mandibular and dental dimensions for sex determination using machine learning. Lateral cephalograms and dental casts were used to obtain mandibular and mesio-distal permanent teeth dimensions, respectively. Univariate statistics was used for variables selection for the supervised machine learning model (alpha = 0.05). The following algorithms were trained: logistic regression, gradient boosting classifier, k-nearest neighbors, support vector machine, multilayer perceptron classifier, decision tree, and random forest classifier. A threefold cross-validation approach was adopted to validate each model. The areas under the curve (AUC) were computed, and ROC curves were constructed. Three mandibular-related measurements and eight dental size-related dimensions were used to train the machine learning models using data from 108 individuals. The mandibular ramus height and the lower first molar mesio-distal size exhibited the greatest predictive capability in most of the evaluated models. The accuracy of the models varied from 0.64 to 0.74 in the cross-validation stage, and from 0.58 to 0.79 when testing the data. The logistic regression model exhibited the highest performance (AUC = 0.84). Despite the limitations of this study, the results seem to show that the integration of mandibular and dental dimensions for sex prediction would be a promising approach, emphasizing the potential of machine learning techniques as valuable tools for this purpose.

BMP2 rs1005464 is associated with mandibular condyle size variation.

This study aimed to evaluate the association between single nucleotide polymorphisms (SNPs) in endochondral development-related genes and mandibular condyle shape, size, volume, and symmetry traits. Cone-beam Computed Tomographies and genomic DNA from 118 individuals were evaluated (age range: 15-66 years). Data from twelve 3D landmarks on mandibular condyles were submitted to morphometric analyses including Procrustes fit, principal component analysis, and estimation of centroid sizes and fluctuating asymmetry scores. Condylar volumes were additionally measured. Seven SNPs across BMP2, BMP4, RUNX2 and SMAD6 were genotyped. Linear models were fit to evaluate the effect of the SNPs on the mandibular condyles' quantitative traits. Only the association between BMP2 rs1005464 and centroid size remained significant after adjusting to account for the false discovery rate due to multiple testing. Individuals carrying at least one A allele for this SNP showed larger condylar size than common homozygotes GG (ß = 0.043; 95% CI: 0.014-0.071; P value = 0.028). The model including BMP2 rs1005464, age and sex of the participants explained 17% of the variation in condylar size. Shape, volume, and symmetry were not associated with the evaluated SNPs. These results suggest that BMP2 rs1005464 might be associated with variation in the mandibular condyles size.

Calcification patterns and morphology of Sella turcica are related to anteroposterior skeletal malocclusions: A cross-sectional study.

BACKGROUND: The sphenoid bone is an irregular, unpaired, symmetrical bone located in the middle of the anterior skull and is involved in craniofacial growth and development. Since the morphology of Sella turcica (ST) is associated with different craniofacial patterns, this study aimed to investigate if there is a correlation between ST morphology on the one hand and sagittal craniofacial patterns on the other hand. METHODS: This study was conducted with a convenience sample that included Brazilian individuals undergoing orthodontic treatment. Lateral cephalograms were used to evaluate the calcification pattern and morphology of ST, as well as skeletal class by analyzing the ANB angle. Pearson's chi-square test with Bonferroni post-hoc test was performed to evaluate the association between ST calcification pattern and morphology, and anteroposterior skeletal malocclusion. The established significance level was 0.05. RESULTS: The study collective was comprised of 305 orthodontic patients (178 (58.4 %) female, 127 (41.6 %) male), who had a mean age of 23.2 (±10.6) years. 131 participants (42.9 %) presented skeletal class I, 142 (46.6%) skeletal Class II, and 32 (10.5%) had a skeletal class III. The degree of prognathism of the mandible showed a homogenous distribution within the study collective (91 (29.9 %) orthognathic, 100 (32.9 %) retrognathic, 113 (37.2 %) prognathic mandible). Concerning the maxilla, 92 (30.2%) individuals presented an orthognathic upper jaw, whereas 60 (19.7%) showed maxillary retrognathism and 153 (50.2%) maxillary prognathism. Compared to patients with skeletal class I, skeletal class III individuals presented significantly more hypertrophic posterior clinoid process (p<0.007) and pyramidal shape of the dorsum of the ST (p<0.038). CONCLUSIONS: Our results suggest that the hypertrophic posterior clinoid process and pyramidal shape of the ST dorsum are more prevalent in individuals with skeletal class III malocclusion.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study

ABSTRACT Objective: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. Methods: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. Results: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. Conclusions: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

RESUMO Objetivo: O objetivo deste estudo foi comparar o torque de inserção (TI), a resistência flexural (RF) e as alterações de superfície em mini-implantes ortodônticos de aço inoxidável (MIs-Ai) e de liga de titânio (MIs-Ti). Métodos: Vinte e quatro MIs (2 x 10 mm; MIs-Ai, n = 12; MIs-Ti, n = 12) foram inseridos em blocos de osso artificial de densidades de 20 lb/ft3 (20 PCF) e 40 lb/ft3 (40 PCF). O torque máximo de inserção foi registrado por meio de um torquímetro digital. A resistência flexural foi avaliada nas deflexões de 2, 3 e 4 mm. Topografia de superfície e composição química dos MIs foram avaliadas por Microscopia Eletrônica de Varredura (MEV) e Espectroscopia de Energia Dispersiva de Raios X (EDS). Modelos lineares gerais e mistos foram utilizados para avaliar o efeito do tipo de MI, da densidade óssea e da deflexão nos desfechos avaliados. Resultados: O TI dos MIs-Ti foi 1,1 Ncm maior do que o obtido para os MIs-Ai (P = 0,018). O TI para MIs inseridos em blocos de teste de 40 PCF foi 5,4 Ncm maior do que para aqueles inseridos em blocos de teste 20 PCF (p < 0,001). MIs-Ai inseridos em osso de maior densidade (40 PCF) apresentaram resistência flexural significativamente maior do que outros grupos, em deflexões de 2 mm (98,7 ± 5,1 Ncm), 3 mm (112,0 ± 3,9 Ncm) e 4 mm (120,0 ± 3,4 Ncm) (p < 0,001). A MEV evidenciou fraturas nos MIs-Ti. A EDS revelou incorporação de 18% de C e 2,06% de O nos MIs-Ai e 3,91% de C nos MIs-Ti, ambos submetidos a testes mecânicos. Conclusões: Com base nos resultados desse estudo in vitro, os MIs-Ai aparentam oferecer adequada estabilidade e maior resistência mecânica, em comparação aos MIs-Ti, quando inseridos em osso de maior densidade.

Investigating the association between dental age and polymorphisms in genes encoding estrogen receptors.

BACKGROUND: Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. OBJECTIVE: to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. METHODOLOGY: This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. RESULTS: A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients' age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). CONCLUSION: The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children.

Effect of chlorhexidine mouthwashes on periodontal parameters and extrinsic tooth staining in orthodontic patients.

INTRODUCTION: Periodontal health and biofilm control are primordial to success in orthodontic treatment. This study aimed to evaluate the effect of chlorhexidine (CHX) mouthwashes on periodontal status and extrinsic tooth staining in orthodontic patients. METHODS: Thirty-three patients of both sexes, aged 11-33 years, under orthodontic treatment with fixed appliances at <16 months, were randomly distributed into 2 groups. In the control group, patients received mechanical hygiene instruction, and in the experimental group, patients also used CHX wash twice a week for 60 days. The effectivity of the protocols was evaluated using the plaque, gingival, gingival bleeding, and discoloration indexes before the hygiene protocol was applied, 15, 30, and 60 days after protocol implementation. RESULTS: In the experimental group, there was a decrease in the plaque, gingival, and gingival bleeding indexes at the different evaluation periods (P <0.05). In addition, there was a significant difference in the discoloration index at 60 days compared with initial time points after implementing hygiene protocols in the experimental group (P <0.05). In contrast, there were no significant differences in plaque, gingival, gingival bleeding, and discoloration indexes in the control group at any time (P >0.05). CONCLUSIONS: CHX mouthwash administered 30 days, twice a week, significantly improved the periodontal status with mild brown staining. After this period, expressive extrinsic tooth staining was observed.

Maxillary alveolar bone evaluation following dentoalveolar expansion with clear aligners in adults: A cone-beam computed tomography study.

Objective: To investigate the effects of maxillary orthodontic expansion on the alveolar bone tissue in adult patients treated with aligners by using cone-beam computed tomography. Methods: Thirty patients (22 females and 8 males; mean age: 36.3 years) were treated with Invisalign® aligners. Cone-beam computed tomography and digital models were obtained before (T0) and after (T1) upper arch expansion. The bone thicknesses in the cervical, middle, and apical areas of the incisors, canines, premolar, and first molars were buccally and palatally measured, totaling 96 areas and 2,880 measurements. The buccolingual inclinations and transverse measurements of the teeth were obtained from digital models to correlate them with the bone changes. The statistical tests used were Student's t-test, analysis of variance, and Pearson's correlation tests (p < 0.05). Results: From the 96 areas evaluated, 84 revealed an increase or stability in the alveolar bone thickness and twelve displayed significant bone loss. Bone changes did not correlate with the tooth inclination and transverse measurements. Conclusions: Within the limitation of the present study, mild levels of upper arch expansion obtained with Invisalign® aligners in adult patients did not result in any clinically significant loss of alveolar bone thickness.

Orthodontic treatment of children with anterior open bite and posterior crossbite: An analysis of the stomatognathic system.

Dental malocclusions are deviations from normalities due to the inadequate growth and development of the dental arch which provides functional changes to the stomatognathic system. The aim of this longitudinal study was to evaluate the electromyographic activity (EMG) the masseter and temporalis muscles, strength of the orofacial tissues and occlusal force of children with anterior open bite (n = 15) and posterior crossbite (n = 20), 7 days after the removal of the orthodontic apparatus. A fixed horizontal palatal crib was used in the treatment of anterior open bite and the fixed appliances Hyrax or MacNamara was used in the treatment of posterior crossbite. EMG of the masticatory muscles was recorded using an electromyograph with wireless sensors during mandibular tasks. Habitual chewing was assessed using the integral of the linear envelope of the electromyographic signal in the masticatory cycles. The strength of the tongue and facial muscles was measured using the Iowa Oral Pressure Instrument. T-Scan was used to analyze the force of occlusal contact. Molar bite force was measured by digital dynamometer. Significant differences (p < 0.05) were found in the EMG data of the masseter and temporalis muscles in the static and dynamic mandibular tasks. There were no significant difference in strength of orofacial tissues, occlusal contact force and molar bite force 7 days after the removal of the orthodontic apparatus. The results of this study suggest that the orthodontic treatment of anterior open bite and posterior crossbite in children promoted functional alteration in the electromyographic activity of masseter and temporalis muscles.

Testosterone suppression impacts craniofacial growth structures during puberty : An animal study.

AIM: Hormones play a crucial role in growth development; however, the impact of testosterone suppression (TS) on craniofacial growth during puberty remains inconclusive. This study aimed to evaluate the impact of TS during puberty on cephalometric measurements and histological characteristics of facial growth centers. MATERIALS AND METHODS: Thirty-six heterogenic Wistar male rats were randomly allocated into experimental orchiectomy (ORX) and control (sham) groups. At an age of 23 days (prepubertal stage), orchiectomy and placebo surgery were performed. Cephalometric measurements were performed via lateral cephalograms during and after puberty. The animals were euthanized at an age of 45 days (pubertal stage) and 73 days (postpubertal stage). Histological slices of the growth centers (condyle, premaxilla, and median palatine suture) were stained with hematoxylin and eosin, and sirius red. Student's t or Mann-Whitney U tests were used to compare linear and angular cephalometric measurements across groups (α error = 5%). RESULTS: Linear and angular measurements were statistically different in ORX animals (cranial bones, maxilla, and mandible) at 45 days and 73 days. Condylar histology showed a decrease in prechondroblast differentiation and a delay of mineralization in ORX animals. Vascularization of the medium palatine suture was lower in the ORX group at 45 days. Type I and III collagen fiber synthesis was lower in the ORX groups. In the premaxillary suture, collagen fibers were better organized in the sham groups. CONCLUSIONS: Our results suggest that testosterone suppression affects craniofacial growth during puberty.

Investigating the association between dental age and polymorphisms in genes encoding estrogen receptors

Abstract Background Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. Objective to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. Methodology This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. Results A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients' age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). Conclusion The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children.

Impact of cigarette smoke on osteogenic and osteoclast signaling in middle palatal suture.

Considering that smoking is a public health problem that has been growing among adolescents, the aim of this study was to investigate the impact of cigarette smoke on osteogenic and osteoclastogenic signaling in middle palatal suture of rats. Male Wistar rats exposed (n = 30) or not to cigarette smoke (n = 30) were used. Exposure to smoke was carried out for two daily periods of 3 minutes each, with an interval of 12 hours between exposures. After the experimental periods of 3, 7, 14 and 21 days, the animals were euthanized. The collected tissues were analyzed using light microscopy and real-time RT-PCR was performed to investigate gene expression. The data obtained were compared using the Kruskal Wallis and Dunn tests (⍺ = 5%). Morphologically, there were no significant changes in the middle palatal suture of rats exposed or not to cigarette smoke during 3, 7, 14 and 21 days (p> 0.05). On the other hand, osteoclastogenic signaling was increased in animals exposed to smoke and was characterized by a higher production of RANKL at 3 and 14 days (p <0.05), with no change in the synthesis of RANK and osteoprotegerin (p> 0.05). Interestingly, in the exposed animals, an early increase in the synthesis of osteocalcin, bone sialoprotein and osteopontin was also identified at 3 days of exposure (p <0.05), not sustained over time (p> 0.05). Cigarette smoke modulates osteogenic and osteoclastogenic signaling in the middle palatal suture of young rats, although morphological changes have not been evidenced.

Impact of cigarette smoke on osteogenic and osteoclast signaling in middle palatal suture

Abstract Considering that smoking is a public health problem that has been growing among adolescents, the aim of this study was to investigate the impact of cigarette smoke on osteogenic and osteoclastogenic signaling in middle palatal suture of rats. Male Wistar rats exposed (n = 30) or not to cigarette smoke (n = 30) were used. Exposure to smoke was carried out for two daily periods of 3 minutes each, with an interval of 12 hours between exposures. After the experimental periods of 3, 7, 14 and 21 days, the animals were euthanized. The collected tissues were analyzed using light microscopy and real-time RT-PCR was performed to investigate gene expression. The data obtained were compared using the Kruskal Wallis and Dunn tests (⍺ = 5%). Morphologically, there were no significant changes in the middle palatal suture of rats exposed or not to cigarette smoke during 3, 7, 14 and 21 days (p> 0.05). On the other hand, osteoclastogenic signaling was increased in animals exposed to smoke and was characterized by a higher production of RANKL at 3 and 14 days (p <0.05), with no change in the synthesis of RANK and osteoprotegerin (p> 0.05). Interestingly, in the exposed animals, an early increase in the synthesis of osteocalcin, bone sialoprotein and osteopontin was also identified at 3 days of exposure (p <0.05), not sustained over time (p> 0.05). Cigarette smoke modulates osteogenic and osteoclastogenic signaling in the middle palatal suture of young rats, although morphological changes have not been evidenced.

Resumo Considerando que a fumaça de cigarro é um problema de saúde pública que está crescendo entre os adolescentes, o objetivo deste estudo foi investigar o impacto da fumaça de cigarro na sinalização osteogênica e osteoclastogênica da sutura palatina mediana de ratos. Foram utilizados ratos Wistar machos expostos (n=30) e não expostos à fumaça de cigarro (n=30). A exposição à fumaça de cigarro foi realizada duas vezes ao dia por 3 minutos, com um intervalo de 12 horas entre as exposições. Os animais foram mortos após o período experimental de 3, 7, 14 e 21 dias. Os tecidos coletados foram analisados em microscópico de luz e pelo RT-PCR em tempo real foi realizado para investigar a expressão gênica. s dados obtidos foram comparados usando o testes de Kruskal Wallis e Dunn (⍺ = 5%). Morfoligicamente, não houve mudança significativa na sutura palatina mediana nos ratos expostos ou não à fumaça de cigarro durante os tempo de 3, 7, 14 e 21 dias (p> 0.05). Por outro lado, a sinalização osteogênica esta aumentada nos animais expostos à fumaça e foi caracterizado por um aumento da produção de RANKL aos 3 e 14 dias (p <0.05), sem mudança na síntese da produção de RANK e osteoprotegerina (p> 0.05). Curiosamente, nos animais expostos, também foi observado um aumento precoce da síntese de osteocalcina, sialoproteína óssea e de osteopontina aos 3 dias de exposição, o que não foi mantido ao longo do tempo. A fumaça de cigarro modula a sinalização osteogênica e osteoclastogênica na sutura palatina mediana de ratos jovens, apesar de não tenha sido evidenciado alterações morfológicas.

Self-ligating brackets exhibit accumulation of high levels of periodontopathogens in gingival crevicular fluid.

Different types of brackets seem to influence the disruption of the oral microbial environment. Therefore, the aim of this study was to evaluate the influence of self-ligating brackets on the gingival crevicular fluid levels of the putative periodontal pathogens Aggregatibacter actinomycetemcomitans sorotype a (Aaa), Tannerella forsythia, Fusobacterium nucleatum, and Porphyromonas gingivalis. Sixty samples of crevicular fluid of twenty patients (11 boys and 9 girls) were analysed at baseline (T0) and after 30 (T1) and 60 (T2) days of bonding of the self-ligating (In-Ovation®R, Dentsply, GAC or SmartClip™, 3 M Unitek, Monrovia, CA, USA) and of one conventional bracket (Gemini™, 3 M Unitek, Monrovia, CA, USA) used with elastomeric ligatures. Total DNA from samples was extracted using CTAB-DNA precipitation method and Real-time PCR was performed to analyse bacterial level. Non-parametric Friedman and Wilcoxon tests were used for data analysis (p value of < 0.05). F. nucleatum presented a different level among the different brackets at T1 (p = 0.025), the highest level in the Gemini™ bracket when compared to the SmartClip™ bracket (p = 0.043). P. ginigvalis levels increased in the In-Ovation®R (p = 0.028) at T1. The subgingival levels of bacterial species associated with periodontal disease P. ginigvalis increased in the self-ligating brackets In-Ovation®R.Clinical Relevance: Some kinds of brackets could provide more retentive sites than others, and it seems to modulate the subgingival microbiota, since, in this study, we could observe the increase of the species associated with periodontal disease. Preventive protocols should be adopted in the use of self-ligating brackets.

The effect of whitening toothpastes on polyurethane and silicone orthodontic clear ligatures: A clinical study.

BACKGROUND: This study aimed to verify the effects of bleaching toothpaste on colour stability, elastic properties, surface topography between aesthetic polyurethane and silicone elastomeric ligatures from different brands. METHODS: Elastomeric ligatures tested were: 1-Mini Single Case Ligature Stick (RMO-polyurethane); 2-Ligature "S" Shaped Dispenser (RMO-Silicone); 3-Sany-tie (GAC-translucent polyurethane); and 4-Sili-tie (GAC-translucent silicone). The ligatures were randomly assigned from the brackets of canines and lower incisors of 40 patients. The study had two phases of 30 days in which a different toothpaste was used, followed by a washout period of 30 days. After each phase, ligatures were submitted to colour checking, tensile strength, and SEM. RESULTS: The average of the ultimate tensile strength (m = 2.59; DP = 0.014) was higher in the control ligatures if compared to the tested ones (m = 2.24; DP = 0.014). There were no statistically significant differences between toothpastes regarding the type of ligature. Also, no interaction was observed between toothpastes in ligature's ultimate tensile strength and strain. The type of toothpaste did not minimize colour changes. CONCLUSION: In conclusion, there was no difference in colour stability and elastic properties between polyurethane or silicone aesthetic elastomeric modules. Whitening toothpastes had no impact on ligatures performance after 30 days in the oral cavity.

Low-level laser therapy (LLLT) improves alveolar bone healing in rats.

The main objective of the present study was to evaluate the effect of low-level laser therapy (LLLT) in enhancing bone healing in irradiated alveolus post-tooth extraction. Sixty male Wistar rats (180 ± 10 g) were used in the present study. The left maxillary first molars were extracted, and the alveolar region was irradiated by diode laser device (GaAlAs) immediately after extraction and for more 3-day daily applications. The animals were randomly assigned into two groups: control group (n = 30, with left maxillary molar extraction-CG) and experimental group (n = 30, with tooth extraction and low-level laser therapy applied to the dental alveolus for 42 s-EG). These groups were divided into subgroups (five rats per subgroup) according to the observation time point-1, 2, 3, 5, 7, and 10 days-post-tooth extraction. The maxillary bone was separated, and the specimens were stained with hematoxylin and eosin, Masson's trichrome, and picrosirius red and immunohistochemistry for RUNX-2. Parametric and nonparametric tests were used with a significance level of 5%. LLLT accelerated bone healing with mature collagen fiber bundles and early new bone formation. Histomorphometric analysis revealed an increase of osteoblast (RUNX-2) and osteoclast (TRAP) activity and in the area percentage of cancellous bone in the lased alveolus compared to the control group. This increase was statistically significant (p < 0.05). Application of LLLT with a GaAlAs diode laser device enhanced bone healing and mineralization on alveolar region.

Photobiomodulation impacts the levels of inflammatory mediators during orthodontic tooth movement? A systematic review with meta-analysis.

During orthodontic tooth movement (OTM), there is the release of cytokines in the gingival crevicular fluid (GCF) that are supposed to participate in the bone remodeling. This systematic review aimed at assessing the effects of photobiomodulation (PBM) on the levels of these cytokines during OTM. This systematic review according to Cochrane Collaboration guidelines aimed to answer the clinical question following the PICOS strategy. The broad search in the literature was performed before 05 April, 2021 in six electronic databases (Pubmed, Web of Science, Scopus, Embase, Cochrane, Biblioteca Virtual de Saúde) and supplemented by the grey literature. The risk of bias of randomized and non-randomized clinical trials was evaluated by two tools: RoB 2 and ROBINS-I. Mean and standard deviation of cytokine levels was extracted to meta-analysis, and the GRADE system was applied to assess the quality of the evidence. Nine studies were included in this review. Low-level laser therapy (LLLT) was the photobiomodulation type used in most of the studies (n = 8). The wavelengths used varied from 618 to 980 nm and also differed concerning the light emission pattern. LLLT increased the levels of IL-1ß, IL-8, OPN, and PGE2, but not TNF-α1, TGF-ß1. The levels of IL6, RANKL, and OPG presented conflicting results. LLLT was statistically associated with an increase of IL-1ß levels (standard mean difference [SMD] = 1.99; 95% confidence interval = 0.66 to 3.33; p < 0.001) with low certainty of evidence. LLLT may increase the levels of IL-1ß and other cytokines; however, the results should be interpreted with caution due to protocol variations between studies, and the few studies added in the meta-analysis.