Spontaneous vesicle formation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer.

A novel method has been developed to prepare vesicles from aqueous solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer, by adding anionic surfactant sodium dodecyl sulfate (SDS) and inorganic salt NaF. As determined by TEM and dynamic light scattering (DLS) measurements, the average diameter of vesicles is about 800 nm having 50 nm outer shell thickness. Identifying hydrophobic interactions between the block copolymers and the microenvironments around the vesicles using FTIR, 1H NMR, and fluorescence spectroscopy techniques revealed the vesicle formation mechanism. The spontaneously formed vesicles were further cross-linked by converting the terminal hydroxyl groups of block copolymers into aldehydes, and then chemically bridging the polymer chains by the reaction between aldehydes and diamine compounds. The cross-linked vesicles are proved much more stable than free vesicles even at higher dilutions. The obtained vesicles with good stability and biocompatibility are promising candidates for widespread applications.

Probing paeonol-pluronic polymer interactions by 1H NMR spectroscopy.

By using a combination of 1H NMR spectroscopy, two-dimensional heteronuclear single-quantum coherence-resolved (1)H{(13)C} and homonuclear rotating-frame Overhauser enhancement NMR correlation experiments with diffusion ordered spectroscopy (DOSY), the location and distribution of a hydrophobic drug, paeonol, have been established with respect to the methyl groups of the poly(ethylene oxide)-poly(propylene oxide) -poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer. The interaction between them is adjustable according to the different temperature-dependent hydrophilicities or hydrophobicities of the triblock copolymer components. On the other hand, such interactions influence the self-assembly properties of the block copolymer amphiphiles in solution. The amount of anhydrous methyl groups of PPO segments shows an increase with increasing paeonol concentration. It was also demonstrated that the shell-crosslinking of the Pluronic polymer has an effect in increasing the amount of anhydrous methyl groups and thus increasing the hydrophobicity of Pluronic micelles. This might be the deeper reason underlying the increase in drug-loading capacity and prolongation in release time of Pluronic micelles for drug delivery after the shell-crosslinking. Changes in self-diffusion coefficients of paeonol with varying copolymer concentrations and types were also determined by the diffusion-based NMR DOSY technique, and values of K(a), DeltaG, and n were calculated.

Oil-induced aggregation of block copolymer in aqueous solution.

The oil-induced aggregation behavior of PEO-PPO-PEO Pluronic P84 [(EO)19(PO)39(EO)19] in aqueous solutions has been systematically investigated by 1H NMR spectroscopy, freeze-fracture transmission electron microscopy (FF-TEM), and dynamic light scattering (DLS). The critical micellization temperature (CMT) for P84 in the presence of oils decreases with increasing oil concentration. The effectiveness of various oils in decreasing the CMT of block copolymer follows the order m-xylene (C(8)H(10)) > toluene (C(7)H(8)) > benzene (C(6)H(6)) > n-octane (C(8)H(18)) > n-hexane (C(6)H(14)) approximately cyclohexane (C(6)H(12)). It was found that the amount of anhydrous PO methyl groups increases whereas the amount of hydrated PO methyl groups decreases upon the addition of oils. At low oil concentration, the oil molecules are entrapped by the micellar core, but as the oil concentration increases above a certain value, the micellar core swells significantly as a result of the penetrated oil molecules, and much larger aggregates are formed. Intermolecular rotating-frame nuclear Overhauser effect (ROE) measurements between P84 and benzene were performed at 10 and 40 degrees C. The specific interaction between benzene and the methyl groups of PPO was determined, and it was observed that the interaction site remained unchanged as the temperature was increased.

1H NMR spectroscopic investigations on the micellization and gelation of PEO-PPO-PEO block copolymers in aqueous solutions.

The effects of temperature, polymer composition, and concentration on the micellization and gelation properties of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers in aqueous solutions were investigated by 1H NMR spectroscopy. It was found that the temperature-dependent behavior of PPO blocks, observed as changes in chemical shift, half-height width, and integral value, could be attributed as an intrinsic tool to characterize the transition states during unimer to micelle formation. The 1H NMR spectral analysis revealed that the hydrophobic part, PPO, of the Pluronic polymers plays a more significant role in the temperature-induced micellization, whereas the transitional behavior of Pluronic polymer, i.e., from micellization to liquid crystals formation, resulted in the drastic broadening of the spectral signals for the PEO, indicating that the PEO segments play a more significant role in the crystallization process. It was also observed that the temperature-dependent changes in the half-height width of the PEO -CH2- signal are sensitive to the liquid crystalline phase formation, which could be attributed to the close packing of spherical micelles at high polymer concentrations or temperatures.

Interaction of urea with pluronic block copolymers by 1H NMR spectroscopy.

Solution 1H NMR techniques were used to characterize the interaction of urea with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers. The urea was established to interact selectively with the PEO blocks of the block copolymer, and the interaction sites were found not to change with increasing temperature. Such interactions influence the self-assembly properties of the block copolymer in solution by increasing the hydration of the block copolymers and stabilizing the gauche conformation of the PPO chain. Therefore, urea increases the critical micellization temperature (CMT) values of PEO-PPO-PEO copolymers, and the effect of urea on the CMT is more pronounced for copolymers with higher PEO contents and lower for those with increased contents of PPO segments.

Salt-induced micellization of a triblock copolymer in aqueous solution: a 1H nuclear magnetic resonance spectroscopy study.

An aqueous micellar solution of a PEO-PPO-PEO triblock copolymer, pluronic F88 (EO103PO39EO103), in the presence of salt (KCl) has been investigated by 1H NMR spectroscopy. The hydrogen-bonding structure in water is directly changed by the strong polarization effect of added salt, which indirectly weakens the interaction of polymer molecules with water. Both EO and PO blocks are dehydrated by the addition of salt in a similar way, whereas the solubility of the PO blocks may be affected in a more pronounced way, which results in the decrease of the critical micellization temperature (CMT). It is found that the addition of salt favors a more compact micellar core, where the water content is decreased and an effective PO-PO interaction is increased. Increasing the salt concentration would result in a decrease in the number of gauche conformers in the PPO chain, which may be the deeper reason for the decreasing solubility of PPO segments in aqueous salt solution. The temperature region over which the micellization occurs is broad, indicating that micelles and unimers coexist over an extended temperature range, whereas this transition region is significantly narrowed by the addition of salt. The addition of salt offers a good substitute way of changing the temperature to induce micellization. The critical micellization salt concentration (CMSC) is determined to be 1.0 mol l-1 for KCl in 2.5% aqueous pluronic F88 solution at 25 degrees C, and the transition region in which both free and associated copolymer molecules coexist is defined to range from 1 to 2 mol L-1.

Effect of hydrophobicity inside PEO-PPO-PEO block copolymer micelles on the stabilization of gold nanoparticles: experiments.

In this paper we present the effect of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer micelles and their hydrophobicity on the stabilization of gold nanoparticles. Gold nanoparticles were prepared by a method developed by Sakai et al. (Sakai, T.; Alexandridis, P. Langmuir 2004, 20, 8426). An absorption centered at 300-400 nm in time-dependent UV spectra provided evidence that the very first step of the synthesis was to form primary gold clusters. Then the gold clusters grew in size and were stabilized by block copolymer micelles. The stabilization capacities of the micelles were modulated by tuning the block copolymer concentration and composition and by adding salts. With good stabilization, gold particles were spherical and uniform in size with a diameter of 5-10 nm. Otherwise they were aggregates with irregular shapes such as triangular, hexagonal, and rodlike. The presence of a small amount of NaF significantly increased the stabilization capacity of the micelles and consequently modified the quality of the gold particles. Using FTIR and 1H NMR spectroscopy, micellization of the block copolymers and hydrophobicity of the micelles were proven very important for the stabilization. A higher hydrophobicity of the micelle cores was expected to favor the entrapment of primary gold clusters and the stabilization of gold nanoparticles.

[Study on interaction of anionic surfactant SDS and bovine serum albumin by fourier transform infrared spectroscopy].

FTIR spectroscopy was applied to investigate the interaction of anionic surfactant Sodium Dodecyl Sulfate (SDS) and Bovine Serum Albumin (BSA). Amide band I of BSA was analyzed to obtain the change in secondary structure of BSA when different concentration of SDS was added and during different interaction period. In short interaction period and at low concentration of SDS, the alpha-helixes increased and the random coil decreased. In long interaction period or at high concentration of SDS, SDS unfolded the protein by decreasing the alpha-helix structure and increasing the random coil.