Spectrum-free integrated photonic remote molecular identification and sensing.

Absorption spectroscopy is widely used in sensing and astronomy to understand remote molecular compositions. However, dispersive techniques require multichannel detection, reducing detection sensitivity while increasing instrument cost when compared to spectrophotometric methods. We present a novel non-dispersive infrared molecular detection and identification scheme that performs spectral correlation optically using a specially tailored integrated silicon ring resonator. We show experimentally that the correlation amplitude is proportional to the number of overlapping ring resonances and gas lines, and that molecular specificity can be achieved from the phase of the correlation signal. This strategy can enable on-chip detection of extremely faint remote spectral signatures.

Athermal silicon waveguides with bridged subwavelength gratings for TE and TM polarizations.

In this paper, athermal silicon waveguides using bridged subwavelength grating (BSWG) structures are proposed and investigated. The realization of temperature-independent BSWG waveguides for both polarizations is demonstrated numerically and experimentally. SU-8 polymer is used as the cladding material to compensate for the positive thermo-optic (TO) coefficient (dn/dT) of silicon. We investigate the dependence of the effective TO coefficient of BSWG waveguides on both the bridge width and grating duty cycle. The BSWG waveguides have a width of 490 nm, a height of 260 nm, and a grating pitch of 250 nm. Athermal behavior is achieved for both the transverse-magnetic (TM) and the transverse-electric (TE) polarized light for a variety of bridge width and duty cycle combinations. Furthermore, the BSWGs can be designed to be athermal for both TE and TM polarization simultaneously.

Silicon nanowire based radio-frequency spectrum analyzer.

We demonstrate a terahertz bandwidth silicon nanowire based radio-frequency spectrum analyzer using cross-phase modulation. We show that the device provides accurate characterization of 640Gbaud on-off-keyed data stream and demonstrate its potential for optical time-division multiplexing optimization and optical performance monitoring of ultrahigh speed signals on a silicon chip. We analyze the impact of free carrier effects on our device, and find that the efficiency of the device is not reduced by two-photon or free-carrier absorption, nor its accuracy compromised by free-carrier cross-chirp.

Archimedean spiral cavity ring resonators in silicon as ultra-compact optical comb filters.

We present an ultra-compact comb filter using an add-drop ring resonator with an Archimedean spiral cavity. The cavity consists of two interleaved spiral branches which are connected in the center using arcs of circle of a radius that causes minimum bend loss. We describe the design procedure and examine the physical parameters governing the resonator performance. As an example, we demonstrate experimentally a comb filter with a 25 GHz channel spacing made of silicon photonic wires and only occupies an area of 80 x 90 microm(2), approximately a 70 fold size reduction compared to a racetrack resonator. The filter transmission is free of spurious reflections, attesting to the smooth transition between different sections of the resonator cavity. Over a 40 channel wavelength span, the filter exhibits a quality factor Q > 35,000, extinction ratios > 10 dB, and an excellent power uniformity with variations < 0.5 dB for both the through and drop ports.

Compact and low power thermo-optic switch using folded silicon waveguides.

By exploiting the small bend radius achievable using high-index-contrast silicon photonic wire waveguides, we demonstrate a new low power thermo-optic switch arranged in a dense, double spiral geometry. Such a design permits the waveguide length to be extended for increased phase shift, without the need for increased heated volume. This provides an effective means to reduce the power consumption of thermo-optic switches, as well as a compact geometry desirable for the development of switch arrays. A low switching power of 6.5 mW was obtained for a spiral-path Mach-Zehnder interferometer device having a 10% - 90% rise time of 14 micros. The switching power is shown to be reduced by more than 5 times compared to a Mach-Zehnder interferometer employing a conventional straight waveguide geometry.

A rejuvenation method for poly(N,N-dimethylacrylamide)-coated glass microfluidic chips.

As microfluidic chips come to integrate the higher levels of functionality required for the implementation of advanced bioanalytical protocols, a crucial factor is that of cost. Although glass chips provide advantages in multilayer integrations, their cost is far higher than that of polymer chips. However, a simple and effective rejuvenation protocol for glass microchips may enable higher levels of integration and functionality on glass microchips. Here we present a method to rejuvenate glass microchips that had been used for capillary electrophoresis to the extent that their performance was degraded. This degradation was due to one of the two mechanisms: (i) a deterioration of the polymer coating on the inner surface of the microchannel or (ii) an aging of the glass substrate. Using the method presented here, we have rejuvenated more than 50 such "aged" microchips. The performance of these microchips was fully restored after the rejuvenation and lasted for hundreds of DNA separation runs. Our experiments indicate that the loss of resolution in microchip separations was not associated with glass aging, but was due to the degradation of the polymer coating on the inner surface of microchannels. This suggests that it is possible to extend the microchip lifetime "forever" using the rejuvenation protocol and that the exploration of higher levels of integration and functionality on glass microchips (or of hybrid structures involving materials capable of withstanding the reagents and elevated temperatures used) is feasible.