Photocatalytic CO2 reduction over B4C/C3N4 with internal electric field under visible light irradiation.

Boron carbide/graphitic carbon nitride (B4C/g-C3N4) p-n hetero-junction photocatalyst with an internal electric field was synthesized by a facile solvent evaporation method and characterized by field emission scanning electron microscope (FESEM), UV-Vis diffuse reflectance spectra (UV-Vis DRS), photoluminescence spectra (PL), etc. Photocatalytic activity of the composite B4C/g-C3N4 loaded with Pt co-catalyst was evaluated using CO2 conversion to CH4 with H2 as the hydrogen source and reductant under visible light irradiation. The coupling of p-type B4C with n-type g-C3N4 significantly improved the performance of photocatalytic CO2 reduction; with the optimum B4C mass fraction of 1/6, the composite photocatalyst showed approximately 6 and 8 times higher CH4 generation rate than g-C3N4 and B4C, respectively. The enhancement was attributed to efficient photo-excited electron/hole separation due to the formation of internal electric field at the p-B4C/n-C3N4 interface.

Determining surface composition of mixed oxides with pH.

In this study we have developed a 2-surface model with the EPHL ("Equilibrium pH at high oxide loading") method for mixed and composite oxides. Oxide charging parameters, namely the protonation and deprotonation constants and the hydroxyl surface densities, can be established from measurements of the pure oxides and used in the 2-surface model to predict the point of zero charges (PZC) of mixed and composite oxides. The accuracy of these predictions has been demonstrated with diverse control samples of known surface composition (physical mixtures of silica and alumina of high and low surface area). The EPHL method has been extended to composite materials (bound catalysts) and can explain correlations of reactivity with catalyst surface composition. The "apparent surface coverage" (ASC) of a particular mixed or composite oxide sample may then be determined by comparing the PZC of the material to either the 2-surface model results, using parameters of the individual oxides, or a calibration curve of EPHL measurements of physical mixtures of the individual ingredients.

Tailoring nanostructures in micrometer size germanium particles to improve their performance as an anode for lithium ion batteries.

A facile and scalable single-step approach is employed to synthesize a bulk germanium electrode, which consists of nanoscale Ge-grains in ∼5 µm porous powders. This three-dimensional Ge electrode exhibits superior specific capacity (∼1500 mA h g(-1)) and cyclic performance, attributed to its unique lithiation/delithiation processes.

Graphene/graphene-tube nanocomposites templated from cage-containing metal-organic frameworks for oxygen reduction in Li-O2 batteries.

Nitrogen-doped graphene/graphene-tube nanocomposites are prepared by a hightemperature approach using a newly designed cage-containing metal-organic framework (MOF) to template nitrogen/carbon (dicyandiamide) and iron precursors. The resulting N-Fe-MOF catalysts universally exhibit high oxygen-reduction activity in acidic, alkaline, and non-aqueous electrolytes and superior cathode performance in Li-O2 batteries.

Dendrimer-mediated synthesis of supported rhodium nanoparticles with controlled size: effect of pH and dialysis.

Rh-dendrimer nanocomposites were synthesized in solution under different conditions and were subsequently used as precursors for the preparation of ZrO2-supported Rh nanoparticles. Elemental analysis, UV-vis, XPS, and STEM measurements were used to estimate the extent of the Rh-dendrimer interactions and to illustrate how the solution pH and dialysis affect the number of Rh atoms complexed with each dendrimer molecule, as well as the final size of the ZrO2-supported Rh particles. When the solution acidity was not controlled and the solution was not purified by dialysis, Rh particles with sizes in the 1-6 nm range were formed on the ZrO2 support. In contrast, the formation of nearly uniform Rh particles was observed when the synthesis was performed under controlled pH and dialysis conditions. Furthermore, the size of these Rh particles can be regulated by controlling the Rh/dendrimer ratio in the original solution.

A carbon-nanotube-supported graphene-rich non-precious metal oxygen reduction catalyst with enhanced performance durability.

A non-precious metal catalyst for oxygen reduction in acid media, enriched in graphene sheets/bubbles during a high-temperature synthesis step, has been developed from an Fe precursor and in situ polymerized polyaniline, supported on multi-walled carbon nanotubes. The catalyst showed no performance loss for 500 hours in a hydrogen/air fuel cell. The improved durability is correlated with the graphene formation, apparently enhanced in the presence of carbon nanotubes.

Self-assembly of well-defined ferrocene triblock copolymers and their template synthesis of ordered iron oxide nanoparticles.

Well-defined ferrocene-containing triblock copolymers were synthesized by atom transfer radical polymerization and self-assembled into highly ordered hexagonal arrays of cylinders via solvent annealing. The thin films were further used as a template and converted into highly ordered iron oxide nanoparticles (α-Fe2O3) by UV/ozonolysis and thermal pyrolysis.

Patterning Pluripotent Stem Cells at a Single Cell Level.

Studies of cell-extracellular matrix (ECM) interactions at a single cell level have drawn interest from scientists around the world. Subcellular ECM micropatterning techniques allow researchers to control cell shape, migration, and spindle orientation during mitosis potentially influencing the stem cell fate. Generally these studies have been limited to somatic cells rather than human pluripotent stem cells (hPSCs) which are capable of enormous differentiation potential. hPSCs require a defined ECM for attachment and express characteristic integrins mediating cell-substrate interactions. hPSCs also rely on cell-cell contacts for survival and to maintain self-renewal properties, but these circumstances also significantly limit hPSC observation at a single cell level. In addition, currently available methods for ECM micropatterning generally require a facility with trained personnel and intricate equipment to produce protein micropatterns. To overcome this problem, we have developed a protocol for vitronectin micropatterning using simple UV/ozone modification of polystyrene. Single hPSCs were able to attach and form characteristic stress fibers and focal adhesions similar to somatic cell types which demonstrate hPSC responsiveness to extracellular adhesive cues. Micropatterned hPSCs were able to be cultured for up to 48 hours while maintaining expression of pluripotency-associated transcription factor OCT4. Although further studies are necessary, the results of our investigation will potentially have a large impact on cell regenerative medicine and tissue engineering.

Nitrogen-doped graphene-rich catalysts derived from heteroatom polymers for oxygen reduction in nonaqueous lithium-O2 battery cathodes.

In this work, we present a synthesis approach for nitrogen-doped graphene-sheet-like nanostructures via the graphitization of a heteroatom polymer, in particular, polyaniline, under the catalysis of a cobalt species using multiwalled carbon nanotubes (MWNTs) as a supporting template. The graphene-rich composite catalysts (Co-N-MWNTs) exhibit substantially improved activity for oxygen reduction in nonaqueous lithium-ion electrolyte as compared to those of currently used carbon blacks and Pt/carbon catalysts, evidenced by both rotating disk electrode and Li-O(2) battery experiments. The synthesis-structure-activity correlations for the graphene nanostructures were explored by tuning their synthetic chemistry (support, nitrogen precursor, heating temperature, and transition metal type and content) to investigate how the resulting morphology and nitrogen-doping functionalities (e.g., pyridinic, pyrrolic, and quaternary) influence the catalyst activity. In particular, an optimal temperature for heat treatment during synthesis is critical to creating a high-surface-area catalyst with favorable nitrogen doping. The sole Co phase, Co(9)S(8), was present in the catalyst but plays a negligible role in ORR. Nevertheless, the addition of Co species in the synthesis is indispensable for achieving high activity, due to its effects on the final catalyst morphology and structure, including surface area, nitrogen doping, and graphene formation. This new route for the preparation of a nitrogen-doped graphene nanocomposite with carbon nanotube offers synthetic control of morphology and nitrogen functionality and shows promise for applications in nonaqueous oxygen reduction electrocatalysis for Li-O(2) battery cathodes.

Cobaltocenium-containing block copolymers: ring-opening metathesis polymerization, self-assembly and precursors for template synthesis of inorganic nanoparticles.

Side-chain cobaltocenium-containing block copolymers are prepared by ring-opening metathesis polymerization (ROMP). These block copolymers include one cobaltocenium-containing block, with the second block being either a nonmetal-containing segment or a cobaltocenium-containing segment with different counterions. These block copolymers are self-assembled into spherical core/shell micelles in solutions. A template strategy is used to prepare cobalt (II or III)-containing nanoparticles by treating the self-assembled micelles via UV/ozonolysis and pyrolysis. Characterization by X-ray photon spectroscopy and X-ray diffraction indicates that these nanoparticles consist of different oxidants of cobalt, depending on the chemical compositions of block copolymers.

Guest induced transformations of assembled pyridyl bis-urea macrocycles.

Pyridine macrocycles with no cavities assembled into close packed columns yet absorbed guests including hydrogen, carbon dioxide, and iodine.

Titanium dioxide-supported non-precious metal oxygen reduction electrocatalyst.

A new non-precious metal oxygen reduction catalyst was developed via heat treatment of in situ polymerized polyaniline onto TiO(2) particles in the presence of Fe species. The TiO(2) provides for improved performance relative to a carbon black-based catalyst and, at a high catalyst loading, allows for reducing the performance gap between non-precious-metal catalyst and Pt/C to ca. 20 mV in RDE testing.

High catalytic activity of Au/CeOx/TiO2(110) controlled by the nature of the mixed-metal oxide at the nanometer level.

Mixed-metal oxides play a very important role in many areas of chemistry, physics, materials science, and geochemistry. Recently, there has been a strong interest in understanding phenomena associated with the deposition of oxide nanoparticles on the surface of a second (host) oxide. Here, scanning tunneling microscopy, photoemission, and density-functional calculations are used to study the behavior of ceria nanoparticles deposited on a TiO(2)(110) surface. The titania substrate imposes nontypical coordination modes on the ceria nanoparticles. In the CeO(x)/TiO(2)(110) systems, the Ce cations adopt an structural geometry and an oxidation state (+3) that are quite different from those seen in bulk ceria or for ceria nanoparticles deposited on metal substrates. The increase in the stability of the Ce(3+) oxidation state leads to an enhancement in the chemical and catalytic activity of the ceria nanoparticles. The codeposition of ceria and gold nanoparticles on a TiO(2)(110) substrate generates catalysts with an extremely high activity for the production of hydrogen through the water-gas shift reaction (H(2)O + CO --> H(2) + CO(2)) or for the oxidation of carbon monoxide (2CO + O(2) --> 2CO(2)). The enhanced stability of the Ce(3+) state is an example of structural promotion in catalysis described here on the atomic level. The exploration of mixed-metal oxides at the nanometer level may open avenues for optimizing catalysts through stabilization of unconventional surface structures with special chemical activity.

Decomposition of dimethyl methylphosphonate on Pt, Au, and Au-Pt clusters supported on TiO2(110).

The decomposition of dimethyl methylphosphonate (DMMP) was studied by temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and Auger electron spectroscopy (AES) on TiO(2)-supported Pt, Au, and Au-Pt clusters as well as on TiO(2)(110) itself. In agreement with previous work, TPD experiments for DMMP on TiO(2)(110) showed that methyl and methane were the main gaseous products. Multiple DMMP adsorption-reaction cycles on TiO(2)(110) demonstrated that active sites for DMMP decomposition were blocked after a single cycle, but some activity for methyl production was sustained even after five cycles. Furthermore, the activity of the TiO(2) surface could be regenerated by heating in O(2) at 800 K or heating in vacuum to 965 K to remove surface carbon and phosphorus, which are byproducts of DMMP decomposition. On 0.5 ML Pt clusters deposited on TiO(2)(110), TPD studies of DMMP reaction showed that CO and H(2) were the main gas products, with methyl and methane as minor products. The Pt clusters were more active than TiO(2) both in terms of the total amount of DMMP reaction and the ability to break C-H, P-O, and P-OCH(3) bonds in DMMP. However, the Pt clusters had no sustained activity for DMMP decomposition, since the product yields dropped to zero after a single adsorption-reaction cycle. This loss of activity is attributed to a combination of poisoning of active sites by surface phosphorus species and encapsulation of the Pt clusters by reduced titania after heating above 600 K due to strong metal support interactions (SMSI). On 0.5 ML Au clusters, CO and H(2) were also the main products detected in TPD experiments, in addition to methane and methyl produced from reaction on the support. The Au clusters were less active for DMMP decomposition to CO and H(2) as well as P-O bond scission, but surface phosphorus was removed from the Au clusters by desorption at approximately 900 K. Au-Pt bimetallic clusters on TiO(2)(110) were prepared by depositing 0.25 ML of Pt followed by 0.25 ML of Au, and the bimetallic surfaces exhibited activity intermediate between that of pure Pt and pure Au in terms of CO and H(2) desorption yields. However, there is evidence that the production of methane from DMMP decomposition occurs at Au-Pt sites.

Adsorbate-driven morphological changes of a gold surface at low temperatures.

Using STM, infrared absorption reflection spectroscopy experiments and density functional calculations we show that low temperature adsorption of CO on gold surfaces modified by vacancy islands leads to morphological changes and the formation of nanosized Au particles. These results demonstrate a dynamic response of a surface during adsorption with consequences for the surface reactivity.

Potential for carbon adsorption on concrete: surface XPS analyses.

The concrete industry is a contributor to the global carbon cycle particularly with respect to the contribution of carbon dioxide in the manufacturing of cement (calcination). The reverse reaction of carbonation is known to occur in concrete, but is usually limited to exterior surfaces exposed to carbon dioxide and humidity in the air. As alternate concrete uses expand which have more surface area, such as crushed concrete for recycling, it is important to understand surface adsorption of carbon dioxide and the positive impacts it might have on the carbon cycle. X-ray photoelectron spectroscopy (XPS) is used in this study to evaluate carbon species on hydrated cement mortar surfaces. Initial estimates for carbon absorption in concrete using othertechniques predictthe potential for carbonate species to be a fraction of the calcination stoichiometric equivalent The XPS results indicate that there is a rapid and substantial uptake of carbon dioxide on the surfaces of these mortars, sometimes exceeding the calcination stoichiometric equivalents, indicative of carbon dioxide surface complexation species. On pure calcite, the excess is on the order of 30%. This accelerated carbon dioxide surface adsorption phenomenon may be importantfor determining novel and effective carbon sequestration processes using recycled concrete.

Effects of metal coating on self-assembled monolayers on gold. 2. Copper on an oligo(phenylene-ethynylene) monolayer.

We report studies on the modifications induced by the evaporation of copper overlayers on a self-assembled monolayer (SAM) of the oligo(phenylene-ethynyl) dithiol, 1-thio-4-[4'-[(4'-thio)phenylethynyl]-1'-ethynyl]-benzene (TTPEB). These SAMs were characterized after deposition from a tetrahydrofuran solution on polycrystalline gold substrates and after copper evaporation and its subsequent removal by nitric acid. Monolayers were studied via cyclic voltammetry (CV), UV-vis multiwavelength ellipsometry, external reflectance infrared (IR) spectroscopy, and ion scattering spectroscopy (ISS). The results obtained indicate that TTPEB SAMs display the same packing characteristics before and after copper evaporation and removal. However, as shown by IR spectroscopy, the monolayers undergo a reorganization process that involves an increase in tilt angle accompanied by rotation of aromatic rings that results in a decrease in the average molecular twist angle. ISS data suggest that copper diffuses through the monolayer after copper evaporation, a result that is significant for applications of this molecule in molecular electronic devices.