Electrolysis-enhanced ecological floating bed and its factors influencing nitrogen and phosphorus removal in simulated hyper-eutrophic water.

To enhance ammonia nitrogen (NH3-N) and phosphate (PO43--P) removal in hyper-eutrophic water, electrolysis-enhanced ecological floating bed (EEEFB) was designed with a Mg-Al alloy anode, a Ir-Ta-Ti metal oxide-coated titanium anode, and an Fe anode with the same graphite cathode. The results showed that the Mg-Al alloy anode with graphite cathode had a better ability to enhance NH3-N and PO43--P removal. When the current density was 0.37 mA·cm-2, the electrolysis time was 24 h/d, and the net removal rates of NH3-N and PO43--P were 62% and 99.4%, respectively. In winter, the purification efficiencies of NH3-N and PO43--P were as high as 7388.4 mg·m-2 and 4297.5 mg·m-2, respectively, by EEEFBs which were significantly higher than the traditional ecological floating bed (p < 0.05). Scanning electron microscopy (SEM) and X-ray spectrometry confirmed that the PO43--P was deposited in the sediment of EEEFBs with Mg-Al alloy anode and Fe anode.

Study on the experimental performance by electrolysis-integrated ecological floating bed for nitrogen and phosphorus removal in eutrophic water.

The new-type electrolysis-integrated ecological floating beds (EEFBs) were set up to study their water removal ability due to the excellent water treatment capacity of electrolysis, this enhanced EEFBs were made of polyethylene filled with biochar substrate and in middle of the substrate placed the Mg-Al alloy served as anode and graphite served as cathode. The results show that removal rates of total nitrogen (TN), ammonia nitrogen (NH3-N), total phosphorus (TP) and phosphate (PO43--P) by the EEFBs increased 53.1%, 96.5%, 76.5% and 74.5%, respectively. The electrolysis reaction was the main pathway for TN and TP removals in the EEFBs. A higher concentration of hydrogen autotrophic denitrification bacteria was recorded in the substrate of the EEFBs than that in the traditional ecological floating beds (EFBs) (p < 0.05), suggesting that the electrolysis may have enhanced the NO3--N removal efficiency of the EEFBs by promoting the growth and reproduce of hydrogen autotrophic denitrification bacteria. The in-situ formation of Mg2+ and Al3+ ions from a sacrificial Mg-Al alloy anode, caused PO43--P and other suspended matter flocculation, improved phosphorus removal and simultaneously reduced turbidity. Thus, electrolysis-integrated ecological floating bed has high nitrogen and phosphorus removal potential in eutrophic water.

Temporal variations of black carbon during haze and non-haze days in Beijing.

Black carbon (BC) aerosol has been identified as one of key factors responsible for air quality in Beijing. BC emissions abatement could help slow regional climate change while providing benefits for public health. In order to quantify its variations and contribution to air pollution, we systematically studied real-time measurements of equivalent black carbon (eBC) in PM2.5 aerosols at an urban site in Beijing from 2010 to 2014. Equivalent black carbon (eBC) is used instead of black carbon (BC) for data derived from Aethalometer-31 measurement. Equivalent BC concentrations showed significant temporal variations with seasonal mean concentration varying between 2.13 and 5.97 µg m(-3). The highest concentrations of eBC were found during autumn and winter, and the lowest concentrations occurred in spring. We assessed the temporal variations of eBC concentration during haze days versus non-haze days and found significantly lower eBC fractions in PM2.5 on haze days compared to those on non-haze days. Finally, we observed a clear inverse relationship between eBC and wind speed. Our results show that wind disperses PM2.5 more efficiently than eBC; so, secondary aerosols are not formed to the same degree as primary aerosols over the same transport distance during windy conditions.