RESUMO
This study aimed to analyze the effects of physical exercise (PE) on bone health in menopausal women through an umbrella review and to assess the quality of systematic reviews (SRs) and meta-analyses (MAs) included. The review was registered in PROSPERO (CRD42020208130) and the Rayyan application was used. The methodological quality of the included studies was evaluated by A MeaSurement Tool to Assess Systematic Reviews (AMSTAR), and Grading of Recommendations Assessment, Development and Evaluation (GRADE) was applied to assess the level of evidence of the results. The results showed that low-intensity jumping exercises with longer sessions proved to be efficient in the hip segment. Swimming requires further investigation, as it showed high heterogeneity. Aerobic and resistance exercises showed inconsistent results, requiring further studies with these modalities of PE. Concurrent training showed improvements in the lumbar spine, femoral neck, Ward's triangle and trochanter. Finally, combined resistance exercises are effective in preserving bone mineral density (BMD) of the femoral neck and lumbar spine in postmenopausal women. In conclusion, jumping exercises were efficient in the hip, while aerobic and resistance exercises are still inconsistent. Concurrent training showed improvements in BMD of the lumbar spine, femoral neck, Ward's triangle and trochanter. Finally, combined resistance protocols are effective in preserving BMD of the femoral neck and lumbar spine in postmenopausal women.
Assuntos
Densidade Óssea , Colo do Fêmur , Feminino , Humanos , Exercício Físico , Vértebras Lombares , Menopausa , Revisões Sistemáticas como Assunto , Metanálise como AssuntoRESUMO
PURPOSE: To evaluate the influence of the addition of chlorhexidine on the antimicrobial effect and on the survival of restorations performed with glass ionomer cement. METHODS: Nine databases were used to search for randomized clinical trials that compared the survival rate and the antimicrobial effect of glass ionomer cement (GIC) restorations with and without the incorporation of chlorhexidine (CHX), without restrictions on year or language. Cochrane Collaboration's Risk of Bias 2 was used to assess the risk of bias. The GRADE approach was used to assess the certainty of evidence. RESULTS: From 593 studies found, seven met the inclusion criteria. The concentration of CHX varied between 0.5 and 2%. In general, the addition of CHX to GIC promoted reductions in Streptococcus mutans and Lactobacillus acidophilus burdens when compared to those without CHX. No study showed a difference in the survival of restorations between GIC with CHX and conventional GIC. Individual risk of bias varied from low to high and the certainty of evidence was classified as very low. CONCLUSIONS: Based on a very low level of certainty, the evidence suggests that the incorporation of CHX in GIC might improve the antimicrobial effects for a short time, in addition to having little influence on the survival of the restoration.
Assuntos
Anti-Infecciosos , Clorexidina , Clorexidina/farmacologia , Cimentos de Ionômeros de Vidro/farmacologia , Humanos , Teste de Materiais , Taxa de SobrevidaRESUMO
CLINICAL RELEVANCE: Irradiance may decrease as the light-emitting diode (LED) is discharged. Therefore, the LED must be charged carefully to prevent the possibility of influencing the chemical, mechanical, and physical properties of composite resin. SUMMARY: The aim of this study was to evaluate the influence of different light-emitting diode (LED) curing units and battery levels on the chemical, mechanical, and physical properties of composite resins. The irradiance for each cycle from full to completely discharged battery level was evaluated, for five different new cordless LED units: Optilight Color (Gnatus), Bluephase (Ivoclar), Valo (Ultradent), Radii Plus (SDI), and Radii Xpert (SDI). After the irradiance evaluation, composite resin specimens were prepared and light cured, while varying the battery level for each LED unit: high level (HL, 100%), medium level (ML, 50%), and low level (LL, 10%). The degree of conversion, diametral tensile strength, sorption, and solubility were also evaluated. Data were checked for homoscedasticity and submitted to two-way and three-way analysis of variance, depending on the test performed, followed by the Tukey test with a significance level of 95%. A negative correlation was found between irradiance and cycles of light curing, which was checked by the Pearson correlation test. Valo and Radii Xpert were not influenced by the battery level in any test performed. However, different battery levels for some LED units can influence the degree of conversion, diametral tensile strength, sorption, and solubility of composite resins.
Assuntos
Resinas Compostas , Lâmpadas de Polimerização Dentária , Fontes de Energia Elétrica , Teste de Materiais , Resistência à TraçãoRESUMO
PURPOSE:: The purpose of this study was to evaluate the effects of four in-office desensitizing products on dentin tubule occlusion and erosive wear. METHODS:: Dentin hypersensitivity was simulated by EDTA application for five minutes. The specimens were randomly allocated into five groups (n=11), according to treatment: No treatment - Control (C), Duraphat (DUR), Desensibilize Nano P (NP), ClinPro XT Varnish (XTV), and ClinPro White Varnish (CWV). They were then submitted to erosive/abrasive cycling for five days. After EDTA, treatment, and cycling, the specimens were analyzed with an environmental scanning electron microscope (ESEM) to verify the number of opened dentin tubules (ODT) which were counted by using ImageJ software, and with a profilometer to determine the surface curvature/loss. ESEM data were analyzed with two-way repeated measure analysis of variance and Tukey tests. For the profilometer, data were analyzed with Kruskal-Wallis, Tukey, and Mann-Whitney tests. RESULTS:: After treatment, all groups showed lower ODT than the control, without significant differences between them. After cycling, the only group that showed lower ODT than the control was group XTV; however, it did not significantly differ from the other groups. For the profilometric analysis, there were significant differences in SL between the experimental times after treatment and after cycling for all groups ( p<0.05). After cycling, no surface loss was detected in groups DUR and XTV, which presented a significantly different curvature than group NP and the control group, but not from group CWV. Surface loss was detected for the control and groups NP and CWV, without difference among them. CONCLUSION:: All desensitizing agents tested presented promising results concerning the obliteration of dentin tubules immediately after treatment. XTV was the only desensitizer capable of preventing the reopening of the tubules after the erosive/abrasive challenges. XTV and DUR presented a protective effect against dentin erosive wear.
Assuntos
Dessensibilizantes Dentinários , Sensibilidade da Dentina , Desgaste dos Dentes , Dentina , Humanos , Microscopia Eletrônica de VarreduraRESUMO
Noncarious cervical lesions (NCCLs) are characterized by a loss of dental structure at the cementoenamel junction (CEJ) caused by stress, biocorrosion, and attrition. Variations in occlusal loading can promote different stress and strain patterns on the CEJ. Restoration of NCCLs is part of lesion management; however, there is still no conclusive restorative protocol for NCCLs. This study aimed to evaluate the stress and strain distribution of maxillary premolars with NCCLs according to three factors: 1) restorative technique; 2) direction of occlusal loading; and 3) mechanical fatigue. Three-dimensional (3D) finite element analysis (FEA) and strain gauge testing were used to assess stress and strain, respectively. 3D-FEA orthotropic, linear, and elastic models were generated: sound tooth (SO); unrestored NCCL; or NCCL restored with glass ionomer; flowable composite resin; nanofilled composite resin (CR); lithium disilicate ceramic; and nanofilled composite resin core associated with a lithium disilicate laminate (CL). A 150-N compressive static load was applied in two conditions: axially in both cusps (Al); and at a 45° angle to the long axis of the tooth applied to the palatine cusp (Ol). For the experimental tests, specimens were treated as described previously, and one strain gauge was attached to the buccal surface of each tooth to record tooth strains before and after cyclic loading (200,000 cycles, 50 N). FEA showed that the association of NCCL and Ol resulted in higher stress values. CR and CL restorations showed the closest biomechanical behavior to SO for both loading types. Loaded Al or Ol specimens showed higher strain values after mechanical fatigue. Lower stress and strain were observed with Al when compared with Ol. The restoration of NCCLs with composite resin only or associated with ceramic laminates seems to be the best approach because the results for those groups were similar in biomechanical behaviors to sound teeth.
Assuntos
Restauração Dentária Permanente/métodos , Análise do Estresse Dentário/métodos , Dente Pré-Molar , Fenômenos Biomecânicos , Resinas Compostas/química , Desenho Assistido por Computador , Materiais Dentários/química , Módulo de Elasticidade , Análise de Elementos Finitos , Humanos , Técnicas In Vitro , Estresse Mecânico , Colo do Dente/patologiaRESUMO
The aim of this study was to evaluate anaemia, serum iron concentrations and δ-aminolevulinate dehydratase (ALA-D) activity in laying hens infected naturally by Salmonella Gallinarum and having severe hepatic lesions. Liver and serum samples were collected from 27 laying hens (20 infected and seven uninfected). The δ-ALA-D activity, haematocrit and serum iron concentrations were evaluated. There were significant decreases in δ-ALA-D activity, haematocrit and serum iron concentrations (P <0.01) in birds infected by S. Gallinarum when compared with uninfected birds. There was a positive correlation (P <0.001) between serum iron concentration, haematocrit (r(2) = 0.82) and δ-ALA-D activity (r(2) = 0.75). A positive correlation was also observed between δ-ALA-D activity and haematocrit (r(2) = 0.78; P <0.01). Liver samples showed moderate focal coagulative necrosis associated with infiltration of lymphoplasmacytic cells, macrophages and heterophils. The anaemia in the infected hens may be related to reduction in δ-ALA-D activity and serum iron concentrations, since both are important for haemopoiesis.
Assuntos
Anemia/veterinária , Sintase do Porfobilinogênio/metabolismo , Salmonelose Animal/complicações , Anemia/etiologia , Animais , Galinhas , Feminino , Ferro/sangue , Salmonelose Animal/enzimologia , Salmonelose Animal/patologia , Salmonella entericaRESUMO
Porous space characterization of carbonate rocks is an important aid in petroleum exploration from carbonate reservoir. In this study, X-ray microtomography technique was applied to evaluate total porosity of a coquina sample extracted from pre-salt reservoir, in Brazil, before and after acid injection. Two image processing program were used in order to assess performance. The results showed that microtomography has potential to compute porosity of coquina samples and provides information about rock porous network.
RESUMO
BACKGROUND: Information on fracture biomechanics has implications in materials research and clinical practice. The aim of this study was to analyse the influence of non-carious cervical lesion (NCCL) size, restorative status and direction of occlusal loading on the biomechanical behaviour of mandibular premolars, using finite element analysis (FEA), strain gauge tests and fracture resistance tests. METHODS: Ten buccal cusps were loaded on the outer and inner slopes to calculate the strain generated cervically. Data were collected for healthy teeth at baseline and progressively at three lesion depths (0.5 mm, 1.0 mm and 1.5 mm), followed by restoration with resin composite. The magnitude and distribution of von Mises stress and maximum principal stress were simulated at all stages using FEA, and fracture strength was also determined (n = 7 per group). RESULTS: There were significant effects of the lesion size and loading directions on stress, strain and fracture resistance (p < 0.05). Fracture resistance values decreased with increase in lesion size, but returned to baseline with restorations. CONCLUSIONS: Combined assessment of computer-based and experimental techniques provide an holistic approach to characterize the biomechanical behaviour of teeth with both unrestored and restored NCCLs.
Assuntos
Dente Pré-Molar/fisiologia , Mandíbula , Colo do Dente/fisiologia , Fraturas dos Dentes/cirurgia , Adulto , Fenômenos Biomecânicos , Resinas Compostas , Restauração Dentária Permanente/métodos , Análise do Estresse Dentário/métodos , Análise de Elementos Finitos , HumanosRESUMO
BACKGROUND: The present study analysed the effects of different occlusal loading on premolars displaying various non-carious cervical lesions morphologies, restored (or not) with composites, by 3D finite element analysis. METHODS: A three-dimensional digital model of a maxillary premolar was generated using CAD software. Three non-carious cervical lesions morphological types were simulated: wedged-shaped, saucer and mixed. All virtual models underwent three loading types (100 N): vertical, buccal and palatal loading. The simulated non-carious cervical lesions morphologies were analysed with and without restorations to consider specific regions, such as the occlusal and gingival walls as well as the depth of the lesions. Data summarizing the stress distribution were obtained in MPa using Maximum Principal Stress. RESULTS: Palatal loads were responsible for providing the highest values of accumulated tensile stress on the buccal wall; 27.66 MPa and 25.76 MPa for mixed and wedged-shaped morphologies, respectively. The highest tensile values found on non-carious cervical lesions morphologies restored with composite resin were 5.9 MPa in the mixed morphology, similar to those found on sound models despite their morphologies and occlusal loading. CONCLUSIONS: The various non-carious cervical lesions morphologies had little effect on stress distribution patterns, whereas the loading type and presence of composite restorations influenced the biomechanical behaviour of the maxillary premolars.
Assuntos
Força de Mordida , Resinas Compostas/química , Restauração Dentária Permanente/métodos , Análise de Elementos Finitos , Imageamento Tridimensional/métodos , Colo do Dente/fisiopatologia , Desgaste dos Dentes/fisiopatologia , Dente Pré-Molar/fisiopatologia , Fenômenos Biomecânicos , Análise do Estresse Dentário/métodos , Módulo de Elasticidade , Humanos , Maxila , Modelos Anatômicos , Modelos Biológicos , Estresse Mecânico , Resistência à Tração , Interface Usuário-ComputadorRESUMO
Certain trypanosomatids co-evolve with an endosymbiotic bacterium in a mutualistic relationship that is characterized by intense metabolic exchanges. Symbionts were able to respire for up to 4 h after isolation from Angomonas deanei. FCCP (carbonyl cyanide-4-(trifluoromethoxy)phenylhydrazone) similarly increased respiration in wild-type and aposymbiotic protozoa, though a higher maximal O2 consumption capacity was observed in the symbiont-containing cells. Rotenone, a complex I inhibitor, did not affect A. deanei respiration, whereas TTFA (thenoyltrifluoroacetone), a complex II activity inhibitor, completely blocked respiration in both strains. Antimycin A and cyanide, inhibitors of complexes III and IV, respectively, abolished O2 consumption, but the aposymbiotic protozoa were more sensitive to both compounds. Oligomycin did not affect cell respiration, whereas carboxyatractyloside (CAT), an inhibitor of the ADP-ATP translocator, slightly reduced O2 consumption. In the A. deanei genome, sequences encoding most proteins of the respiratory chain are present. The symbiont genome lost part of the electron transport system (ETS), but complex I, a cytochrome d oxidase, and FoF1-ATP synthase remain. In conclusion, this work suggests that the symbiont influences the mitochondrial respiration of the host protozoan.
Assuntos
Bactérias/classificação , Mitocôndrias/metabolismo , Consumo de Oxigênio/fisiologia , Simbiose/fisiologia , Trypanosomatina/microbiologia , Trypanosomatina/fisiologia , Bactérias/metabolismo , Evolução Biológica , Transporte de Elétrons/genética , Transporte de Elétrons/fisiologia , Regulação da Expressão Gênica , Trypanosomatina/genéticaRESUMO
Ischemic preconditioning (IPC) of one or two limbs improves performance of exercise that recruits the same limb(s). However, it is unclear whether IPC application to another limb than that in exercise is also effective and which mechanisms are involved. We investigated the effect of remote IPC (RIPC) on muscle fatigue, time to task failure, forearm hemodynamics, and deoxygenation during handgrip exercise. Thirteen men underwent RIPC in the lower limbs or a control intervention (CON), in random order, and then performed a constant load rhythmic handgrip protocol until task failure. Rates of contraction and relaxation (ΔForce/ΔTime) were used as indices of fatigue. Brachial artery blood flow and conductance, besides forearm microvascular deoxygenation, were assessed during exercise. RIPC attenuated the slowing of contraction and relaxation throughout exercise (P < 0.05 vs CON) and increased time to task failure by 11.2% (95% confidence interval: 0.7-21.7%, P <0.05 vs CON). There was no significant difference in blood flow, conductance, and deoxygenation between conditions throughout exercise (P > 0.05). In conclusion, RIPC applied to the lower limbs delayed the development of fatigue during handgrip exercise, prolonged time to task failure, but was not accompanied by changes in forearm hemodynamics and deoxygenation.
Assuntos
Artéria Braquial/diagnóstico por imagem , Força da Mão , Precondicionamento Isquêmico/métodos , Fadiga Muscular , Força Muscular/fisiologia , Músculo Esquelético/fisiologia , Treinamento Resistido/métodos , Adulto , Antebraço/irrigação sanguínea , Hemodinâmica , Hemoglobinas/metabolismo , Humanos , Masculino , Contração Muscular , Músculo Esquelético/irrigação sanguínea , Músculo Esquelético/metabolismo , Mioglobina/metabolismo , Análise Espectral , Ultrassonografia Doppler Dupla , Adulto JovemRESUMO
Acid treatments are used in the oil and gas industry, to increase the permeability of the carbonate reservoirs by creating preferential channels, called wormholes. Channels formation is strongly influenced by acid type and injection rate. The aim of this study is to evaluate some characteristics of the microporous system of carbonate rocks, before and after acidizing. For that purpose X-ray high-resolution microtomography was used. The results show that this technique can be used as a reliable method to analyze microstructural characteristics of the wormholes.
RESUMO
Duboisia sp. is a small tree belonging to the family Solanaceae originating from the rainforest areas of the eastern coast of Australia. Dried leaves are used for the extraction of pharmaceutical alkaloids, making this a commercially viable crop. The root-knot nematode Meloidogyne incognita has been reported parasitizing Duboisia myoporoides (5); however, no information of other root-knot nematode species associated with this plant was found. Duboisia sp. is cultivated at Solana Farm, near Arapongas (23°25'08â³ S, 51°25'26â³ W), Paraná State, Brazil. During the renovation of a production field in this municipality, galled roots were observed on plants and samples were submitted to the Nematology Laboratory at Instituto Agronômico do Paraná, IAPAR, on December 2013. Plants did not exhibit any above-ground symptoms. The specimens were identified through perineal patterns and esterase phenotypes of 20 adult females extracted from dissected roots (2,3) and morphometrics of 10 second-stage juveniles extracted from roots using the blender-sieving method (1). Morphological characteristics were consistent with those described for M. javanica (4). Females had rounded perineal patterns with low, trapezoid shape dorsal arch, striae smooth interrupted by a pair of incisures on both sides, corresponding to lateral fields, clearly demarcated from striae by more or less parallel lines, tail whorl often distinct (4). The juvenile mean body length was 459.9 ± 28.7 µm and tail length averaged 51.6 ± 5.1 µm, with 10 to 16 µm long hyaline region and finely rounded tail tip (4). Results from the esterase electrophoresis were typical of M. javanica (2) with the J3 (Rm = 1.0, 1.3, and 1.4) phenotype being obtained. To our knowledge, this is the first report of M. javanica on Duboisia sp. in Brazil. This finding has great importance for Brazilian production since this nematode may damage plants, reduce yields, and control of this nematode on Duboisia sp. is difficult (5). Additional work is necessary in order to elucidate the losses caused by M. javanica on Duboisia sp. References: (1) J. I. Bonetti and S. Ferraz. Fitopatol. Bras. 6:533, 1981. (2) P. R. Esbenshade and A. C. Triantaphyllou. J. Nematol. 22:10, 1990. (3) K. M. Hartman and J. N. Sasser. Page 115 in: An Advanced Treatise on Meloidogyne. Volume II Methodology. K. R. Barker et al., eds. North Carolina State University Graphics, Raleigh, 1985. (4) D. J. Hunt and Z. A. Handoo. Page 55 in: Root-Knot Nematodes. R. N. Perry et al., eds. CABI International, Wallingford, UK, 2010. (5) A. M. Mello et al. Nematol. Bras. 22(2):12, 1998.
RESUMO
Nas pesquisas com fitoterápicos o uso popular pode sugerir espécies potencialmente importantes, porém, faz-se necessário uma série de estudos, entre eles, a identificação de espécies com comprovada ação farmacológica e/ou substâncias biologicamente ativas. O uso de fármacos fitoterápicos na prática clínica, tratamento e prevenção de afecções de menor severidade vêm sendo reconhecido pelo SUS ultimamente. Apesar da utilização de plantas medicinais na odontologia ser ainda pouco explorada, existe pesquisa científica sobre os efeitos antimicrobiano, analgésico e antinflamatório de algumas espécies, entre elas: óleo de copaíba, extrato de romã, cravo da Índia, malva, tanchagem, amoreira, sálvia, e camomila. Nesta revisão o objetivo foi reunir informação sobre o potencial da aroeira-do-sertão (M. urundeuva All), planta utilizada na medicina tradicional nordestina e em alguns países da América do Sul, como fitoterápico na odontologia. Os extratos de aroeira são obtidos através do preparo das folhas, raízes, entrecasca e casca do tronco e galhos. Da casca de M. urundeuva já foram isoladas: chalconas diméricas: urundeuvina A, B, C, e matosina. Encontramos pesquisas sobre os seguintes efeitos da aroeira-do-sertão: ação antimicrobiana; antiinflamatória/cicatrizante no tratamento de ferimentos; gastrites; úlceras gástricas; cervicites; vaginites e hemorróidas. A aroeira conta com bons resultados em pesquisas que avaliaram o controle de microorganismo relacionado à patologias bucais, tal como S. mutans. No entanto, necessita-se de estudos para comprovar seu mecanismo de ação e definir condições seguras para seu uso em patologias específicas.
With regards to the studies of phytotherapeutic medicines, their popular use proves to be potentially important; however, a series of studies are necessary focusing on the identification of the species that have proven pharmacological action and/or biologically active components. The use of phytotherapy medicines in the clinical practice, treatment and prevention of less severe disorders is being recently recognized by the Brazilian SUS. Particularly in dentistry, the use of medicinal plants is still underexplored. However, some studies were conducted with plants of popular medicine use, such as: copaiba oil, pomegranate extract, clove, malva, plantain, mulberry, sage and chamomile, among others, in the search for antimicrobial, analgesic and anti-inflammatory qualities. Some of these qualities were later proven in scientific studies. In this review, we aimed to highlight the potential of the "aroeira-do-sertão" tree (M. urundeuva All), which is a plant utilized in traditional medicine in the Northeast region of Brazil and in some South America countries, as a phytotherapeutic medicine in dentistry. The extracts of the "aroeira-do-sertão" tree are acquired through the preparation of the leaves, roots and bark of the trunk and branches. The dimeric chalcones, urundeuvina A, B, C and matosine were isolated in the M. urundeuva bark. Some published studies have investigated the effects of the "aroeira-do-sertão" such as; antimicrobial action, anti-inflammatory action, healing in the treatment of wounds, gastritis, gastric ulcers, cervicitis, vaginitis, and hemorrhoids. In this regard, the "aroeira-do-sertão" has shown good results in studies involving the control of microorganism related to oral conditions, such as S. mutans. However, further studies are needed to confirm its mechanism of action and establish safe conditions for its use in specific situations (i.e. diseases).
Assuntos
Bursera/metabolismo , Odontologia/classificação , Medicamento Fitoterápico , Plantas Medicinais/metabolismoRESUMO
The effects of oviposition time, which represents different positions of the follicles in a sequence of posture, were studied on egg weight, chick weight, egg weight loss during incubation, hatchability, embryo mortality and infertility . A total of 19, 820 eggs, layed on the same day, from Cobb® broiler breeders aging 46-week-old were used. The eggs were classified according to the oviposition time posture (corresponding to the time of collection) from 8:30 am, 10:30 am, 12:30 pm, 14:30 pm and 16:30 pm, which represented the folowing treatments: 1st, 2nd, 3rd, 4th and 5th collects, respectively. The experimental design was completely randomized with five treatments and 36 repetitions, and each tray of 96 eggs was considered a repetition. The normal and homogeneous data were submitted to analysis of variance and means compared by Tukey test. The non-normal and non-homogeneous averages were compared by Kruskal-Wallis test. It is concluded that the time of egg laying has influence on egg weight and chick weight, but does not affect hatchability, fertility and embryonic development.
Assuntos
Animais , Embrião de Galinha , Postura , Aves/classificaçãoRESUMO
Common bean (Phaseolus vulgaris F.) is one of the most important crops in Paraná State, which is responsible for almost 10% of the Brazilian production (4). Root knot nematodes, Meloidogyne spp., are common parasites of this crop worldwide, but damage caused by Meloidogyne inornata has not been reported. During a survey of nematode species present on common bean fields in Paraná State, Brazil, galled root samples of cultivars Tuiuiú and Eldorado were submitted, in June 2012, in the Nematology Laboratory from IAPAR, collected in the municipalities of Araucária (25°35'34â³S, 49°24'36â³W) and Santana do Itararé (23°45'18â³S, 49°37'44â³W). Plants did not exhibit any above-ground symptoms. The specimens were identified through perineal patterns and esterase phenotypes of 20 adult females extracted from dissected roots (2,3). The population densities observed in the samples were 140 and 700 J2 and eggs per gram of roots, respectively, for both samples. Characteristics were consistent with those described for M. inornata. For example, perineal patterns of M. inornata showed a high dorsal arch, with smooth to wavy striae, similar to those of M. incognita; but no punctate markings between anus and tail terminus were observed. However, from the esterase electrophoresis we obtained the I3 (Rm = 0.83, 1.15, and 1.32) phenotype, typical of M. inornata, a species-specific phenotype used to differentiate this species from M. incognita (1). Moreover, the excretory pore of adult females was located 32.1 (± 5.4) µm from the anterior end, consistent with the M. inornata description (25 to 53 µm) (1). To the best of our knowledge, this is the first report of M. inornata parasitizing common bean roots. This finding has great importance for Brazilian agriculture, since this nematode may damage common bean plants and become an additional problem for this crop. Additional work is necessary in order to elucidate the losses caused by M. inornata on common bean. References: (1) R. M. D. G. Carneiro et al. Nematology 10:123, 2008. (2) P. R. Esbenshade and A. C. Triantaphyllou J. Nematol. 22:10, 1990. (3) K. M. Hartman and J. N. Sasser. Page 115 in: An Advanced Treatise on Meloidogyne, Volume II Methodology. K. R. Barker et al., eds. Raleigh: North Carolina State University Graphics, 1985. (4) MAPA. Feijão, Ministério da Agricultura, Brasil. Retrieved from http://www.agricultura.gov.br/vegetal/culturas/feijao September 05, 2012.
RESUMO
Teak (Tectona grandis Linn. F.) is one of the most important forest crops in Brazil, occupying areas in different regions, such as Goiás, Mato Grosso, Paraná, and São Paulo states. Teak wood is used for many purposes such as shipbuilding, rolling and plywood, firewood, and charcoal. In May 2011, teak symptomatic feeder root samples, exhibiting inconspicuous, small galls, were collected in the municipality of Piracicaba, São Paulo State, Brazil (22°41'46.90â³S, 47°38'36.84â³W). Specimens were identified through perineal patterns and esterase phenotypes of 20 adult females (1,2). Perineal patterns and esterase phenotypes were consistent with those described for Meloidogyne arenaria (Neal, 1889) Chitwood, 1949 and M. javanica (Treub, 1885) Chitwood, 1949. Perineal patterns of M. arenaria showed a low dorsal arch, compressed dorsolaterally, with lateral field marked by some forked and broken striae; no punctate markings between anus and tail terminus were observed. Perineal patterns of M. javanica were rounded, with low dorsal arch, striae smooth, lateral field distinct, clearly demarcated from striae by parallel lines. From the esterase electrophoresis we obtained A2 (Rm:1.2;1.3) and J3 (Rm:1.0;1.25;1.4) phenotypes, typical from M. arenaria and M. javanica, respectively. To our knowledge, this is the first report of M. arenaria parasitizing teak roots in Brazil and elsewhere (new host) and the first report of M. javanica infecting teak in the State of São Paulo. Previously, M. javanica was reported to be infecting teak-growing areas in the State of Mato Grosso (3). This finding has a great importance, not only by the inclusion of these parasites in teak pathological scenario, but also for predicting possible damage in plant species used in teak-based intercropping systems. References: (1) P. R. Esbenshade and A. C. Triantaphyllou. J. Nematol. 22:10, 1990. (2) K. M. Hartman and J. N. Sasser. 1985. Page 115 in: An Advanced Treatise on Meloidogyne. Volume II, Methodology. K. R. Barker et al., eds. North Carolina State University Graphics, Raleigh,1985. (3) R. A. Silva et al. Nematol. Bras. 27:261, 2003.
RESUMO
The Brazilian Cerrado Region has many natural resources that have high social economic interest. Pequi (Caryocar brasiliense Camb.), a native species from that area, has an edible fruit, which is highly appreciated by the local population, and also a high-quality wood. In January 2010, pequi root samples were collected near the municipality of Rio Verde, Goiás State, Brazil (17°49'25.76â³S, 51°02'10.06â³W). Roots were washed with tapwater, dried on absorbent paper, cut in 1-cm2 pieces, and processed for nematode extraction by the blender centrifugal flotation method (2). The specimens were identified by morphological and morphometrical characteristics of six adult females mounted in formaldehyde temporary slides (1). Morphological characters used for identification included female body, stylet, pharyngeal overlapping, pharynges, postvulval uterine sac, tail lengths, stylet knobs, number of labial rings, vulva position in relation to body length, body diameters (high body, vulval, and anus region), and the de Man's ratios (a, b, b', c, and c'). Characters measured were consistent with those described for Pratylenchus zeae Graham, 1951 (1); the labial region showed three annuli, stylet was 14.83 (±0.93) µm long, with broad, anteriorly flattened basal knobs. Vulva position was 71.66% (±0.98) of body length and spermatheca was round, small, and without sperm (males were not found). Postvulval uterine sac was short (31.3 ± 4.03 µm) and tail (26.6 ± 3.61 µm) was conoid, pointed, and unstriated. Pharyngeal overlapping length was 30.5 (±6.5) µm; pharynges were 150.83 (± 28.16) µm long. The de Man's ratios obtained were: a = 24.26 ± 2.31; b = 3.89 ± 0.69; b' = 3.08 ± 0.48; c = 17.17 ± 1.47; and c' = 2.25 ± 0.19. To our knowledge, this is the first report of P. zeae infecting pequi. It is difficult to determine the economic importance of this nematode parasite to pequi production since pequi is not yet a commercial crop in Brazil. This finding, however, has long term importance because researchers have been developing improved cultivars by combining favorable agronomic characteristics with high oilseed content for biofuel production. If these are commercialized, P. zeae could become an important pathogen in pequi plantings. References: (1) P. Castillo and N. Vovlas. Pratylenchus (Nematoda: Pratylenchidae): Diagnosis, Biology, Pathogenicity and Management. Koninklijke Brill NV, Leiden, the Netherlands, 2007. (2) W. A. Coolen and C. J. D'Herde. A Method for the Quantiative Extraction of Nematodes from Plant Tissue. State Agric. Entomol. Res. Stn. Ghent, Belgium, 1972.
RESUMO
The aim of this study was to determine the percentage of gutta-percha-filled area (GPFA) obtained by Thermafil and System B techniques using light microscopy and digital image processing. Forty-five human mandibular first molars were prepared and obturated as follows: Group 1: lateral condensation (n = 15); Group 2: System B (n = 15); and Group 3: Thermafil system (n = 15). Horizontal sections were cut 4 and 6 mm from the apical foramen of each tooth. The samples were metallographically prepared and taken through photomicrographs. Using digital analysis, the cross-sectional area of the canal and the gutta-percha areas were measured. The GPFA data obtained for the three groups were analysed using the non-parametric Friedman and Wilcoxon Signed-Ranks tests. Significant differences were found between Group 3 and Group 2-Group 1. No significant difference was found between Group 2 and Group 1. The Thermafil system produced significantly higher GPFAs than lateral condensation and System B techniques (P < 0.01). This result suggests that the Thermafil system can reduce sealer and voids.
Assuntos
Cavidade Pulpar/anatomia & histologia , Guta-Percha/química , Materiais Restauradores do Canal Radicular/química , Obturação do Canal Radicular/métodos , Humanos , Processamento de Imagem Assistida por Computador , Teste de Materiais , Microscopia Eletrônica de Varredura , Dente Molar , Obturação do Canal Radicular/instrumentação , Preparo de Canal Radicular/métodos , Propriedades de Superfície , Fatores de Tempo , Cimento de Óxido de Zinco e Eugenol/químicaRESUMO
OBJECTIVE: To evaluate serum chlamydia antibody titers (CATs) in tubal occlusion or previous ectopic pregnancy and the associated risk factors. METHODS: The study population consisted of 55 women wih tubal damage and 55 parous women. CAT was measured using the whole-cell inclusion immunofluorescence test and cervical chlamydial DNA detected by PCR. Odds ratios were calculated to assess variables associated with C. trachomatis infection. RESULTS: The prevalence of chlamydial antibodies and antibody titers in women with tubal occlusion or previous ectopic pregnancy was significantly higher (P < .01) than in parous women. Stepwise logistic regression analysis showed that chlamydia IgG antibodies were associated with tubal damage and with a larger number of lifetime sexual partners. CONCLUSIONS: Chlamydia antibody titers were associated with tubal occlusion, prior ectopic pregnancy, and with sexual behavior, suggesting that a chlamydia infection was the major contributor to the tubal damage in these women.