Facile biosynthesis of Ag-ZnO nanocomposites using Launaea cornuta leaf extract and their antimicrobial activity.

The quest to synthesize safe, non-hazardous Ag-ZnO nanoomposites (NCs) with improved physical and chemical properties has necessitated green synthesis approaches. In this research, Launaea cornuta leaf extract was proposed for the green synthesis of Ag-ZnO NCs, wherein the leaf extract was used as a reducing and capping agent. The antibacterial activity of the prepared nanoomposites was investigated against Escherichia coli and Staphylococcus aureus through the disc diffusion method. The influence of the synthesis temperature, pH, and precursor concentration on the synthesis of the Ag-ZnO NCs and antimicrobial efficacy were investigated. The nanoparticles were characterized by ATR-FTIR, XRD, UV-Vis, FESEM, and TEM. The FTIR results indicated the presence of secondary metabolites in Launaea cornuta which assisted the green synthesis of the nanoparticles. The XRD results confirmed the successful synthesis of crystalline Ag-ZnO NCs with an average particle size of 21.51 nm. The SEM and TEM images indicated the synthesized nanoparticles to be spherical in shape. The optimum synthesis conditions for Ag-ZnO NCs were at 70 °C, pH of 7, and 8% silver. Antibacterial activity results show Ag-ZnO NCs to have higher microbial inhibition on E. coli than on S. aureus with the zones of inhibition of 21 ± 1.08 and 19.67 ± 0.47 mm, respectively. Therefore, the results suggest that Launaea cornuta leaf extract can be used for the synthesis of Ag-ZnO NCs.

Functional impacts of polyaniline in composite matrix of photocatalysts: an instrumental overview.

The challenges associated with photocatalysts including their agglomeration, electron-hole recombination and limited optoelectronic reactivity to visible light during the photocatalysis of dye-laden effluent make it necessary to fabricate versatile polymeric composite photocatalysts, and in this case the incredibly reactive conducting polyaniline can be employed. The selection of polyaniline among the conducting polymers is based on its proficient functional impacts in composite blends and proficient synergism with other nanomaterials, especially semiconductor catalysts, resulting in a high photocatalytic performance for the degradation of dyes. However, the impacts of PANI in the composite matrix, which result in the desired photocatalytic activities, can only be assessed using multiple characterization techniques, involving both microscopic and spectroscopic assessment. The characterization results play a significant role in the detection of possible points of agglomeration, surface tunability and improved reactivity during the fabrication of composites, which are necessary to improve their performance in the photocatalysis of dyes. Accordingly, studies revealed the functional impacts of polyaniline in composites including morphological transformation, improved surface functionality, reduction in agglomeration and lowered bandgap potential employing different characterization techniques. In this review, we present the most proficient fabrication techniques based on the in situ approach to achieve improved functional and reactive features and efficiencies of 93, 95, 96, 98.6 and 99% for composites in dye photocatalysis.

Data from the batch adsorption of ciprofloxacin and lamivudine from synthetic solution using jamun seed (Syzygium cumini) biochar: Response surface methodology (RSM) optimization.

This dataset expresses the experimental data on the batch adsorption of ciprofloxacin and lamivudine from synthetic solution using jamun seed (JS) (Syzygium cumini) biochar. Independent variables including concentration of pollutants (10-500 ppm), contact time (30-300 min), adsorbent dosage (1-1000 mg), pH (1-14) and adsorbent calcination temperature (250,300, 600 and 750 °C) were studied and optimized using Response Surface Methodology (RSM). Empirical models were developed to predict the maximum removal efficiency of ciprofloxacin and lamivudine, and the results were compared with the experimental data. The removal of polutants was more influenced by concentration, followed by adsorbent dosagage, pH, and contact time and the maximum removal reached 90%.

Investigation of functional performance of treatment systems for textile wastewater in selected textile industries in Tanzania.

Textile industrialization is an integral part of the economic growth in Tanzania. However, the corresponding wastewater from textile treatment processes consists of dyes and auxiliaries associated with acute toxicological impacts. This necessitates an investigation of the functional performance of the industrial treatment systems used before effluent discharge. The study primarily accesses the catalog of industrial dyes and the functionality of the treatment system at Arusha, Morogoro and Dar es Salaam vis-à-vis the effluent physicochemical properties. The analytical study reveals disperse (42%), vat (34%) and reactive (26%) as the most used industrial dyes. The physicochemical properties of the quantified wastewater reveal a significant amount of and phosphorus which was consequent to the high turbidity, biochemical oxygen demand (BOD) and chemical oxygen demand (COD) apart from the color at the different sampling points. Although the treatability of the wastewater was 90% efficient using an activated carbon system (237.33 ± 0.67 mg/L). Similarly, the use of aerated constructed wetlands shows efficiency in the remediation of the recalcitrant having a value of 12.13 ± 0.89b mg/L (90%) and 13.22 ± 0.15a mg/L (94%). Thereafter, needful recommendations were suggested based on the physicochemical properties of the textile wastewater and to improve the functionality of the treatment systems in the respective industries.

Adsorption-capacitive deionization hybrid system with activated carbon of modified potential of zero charge.

In this study water solutions are desalinated with carbon electrodes of modified surface charges. The idea is to endow the electrodes with the ability to physically adsorb salt ions without applying potential so as to save energy. The modification enhanced to decrease the energy consumption of a newly invented adsorption-CDI hybrid system by 19%, since modified activated carbon cell consumed 0.620 (relative error 3.00%) kWh/m3 compared to pristine activated carbon cell which consumed 0.746 (relative error 1.20%) kWh/m3. Further analysis revealed high adsorption capacity of the modified activated carbon electrode cell which exhibited 9.0 (relative error 2.22%) compared to activated carbon cell with 5.3 (relative error 5.66%) mg g-1. These results show the potential of surface modification in adding value to low cost activated carbons for application in CDI.

In situ facile green synthesis of Ag-ZnO nanocomposites using Tetradenia riperia leaf extract and its antimicrobial efficacy on water disinfection.

In this work, Ag-ZnO nanocomposites were prepared by a green synthesis route using aqueous leaf extract of Tetradenia riperia and investigated for antibacterial activity against Escherichia coli and Staphylococcus aureus. To optimize the synthesis of the Ag-ZnO, the effects of precursor concentrations, pH, and temperatures were studied. The Ag-ZnO nanocomposites were characterized by XRD, ATR-FTIR, FESEM, and TEM. Results show that the concentration of 8% Ag, the temperature of 80 °C, and a pH of 7-8 were optimal for the synthesis of Ag-ZnO nanocomposites. The XRD analysis showed the decrease in particle size of Ag-ZnO from 23.6 to 14.8 nm with an increase in Ag concentrations, which was further supported by FESEM analysis. TEM image of 8% Ag provides more information on the coexistence of Ag on ZnO where an average particle size of 14.8 nm was determined. The ATR-FTIR analysis confirmed the presence of phenolic compounds, which work as reducing and stabilizing agents. The antimicrobial activity results show that Ag-ZnO nanocomposite demonstrated a higher antimicrobial potency on E. coli than on S. aureus. Therefore, Tetradenia riperia leaf extract is a viable route for the synthesis of Ag-ZnO nanocomposites to be used for various applications, including water disinfection.

A Review of Methods for Removal of Ceftriaxone from Wastewater.

The presence of pharmaceuticals in surface water and wastewater poses a threat to public health and has significant effects on the ecosystem. Since most wastewater treatment plants are ineffective at removing molecules efficiently, some pharmaceuticals enter aquatic ecosystems, thus creating issues such as antibiotic resistance and toxicity. This review summarizes the methods used for the removal of ceftriaxone antibiotics from aquatic environments. Ceftriaxone is one of the most commonly prescribed antibiotics in many countries, including Tanzania. Ceftriaxone has been reported to be less or not degraded in traditional wastewater treatment of domestic sewage. This has piqued the interest of researchers in the monitoring and removal of ceftriaxone from wastewater. Its removal from aqueous systems has been studied using a variety of methods which include physical, biological, and chemical processes. As a result, information about ceftriaxone has been gathered from many sources with the searched themes being ceftriaxone in wastewater, ceftriaxone analysis, and ceftriaxone removal or degradation. The methods studied have been highlighted and the opportunities for future research have been described.

What influences individuals to invest in improved sanitation services and hygiene behaviours in a small town? A formative research study in Babati, Tanzania.

Sub-Sahara African countries face immense challenges in ensuring adequate sanitation and hygiene behaviours to the rapidly growing populations. Attempts to address these challenges require empirical evidence to inform policy and planning. We contribute toward that goal by unveiling findings of formative research conducted in Babati, a rapidly growing town in Tanzania. We conducted a cross-sectional study involving 486 households, to unwind motives and barriers for individuals to invest in improved sanitation services and hygiene behaviour change. We used several methods including household survey, focus group discussions, behaviour observations and spot checks. The findings revealed that households derive their motivation to invest in improved sanitation and hygiene practices from comfort, raising social status, and the need for personal safety and privacy. Other motives include fear of penalties and fines and fear of disease outbreaks, whilst the barriers include, limited water availability and accessibility, environmental factors, property rights, cultural issues, financial constraints, and a person's attitude. Quantitative data were subjected to multivariate analysis to identify determinants of households to invest in sanitation and hygiene practices. The logistic regression analyses revealed that sources of water, property rights, and education level were the main determinants of households to invest in sanitation and hygiene facilities, while household income was the main determinant for households to invest in both construction of handwashing facility and water treatment. We argue that the initiative to promote sanitation and hygiene behaviour change in small towns should focus on promoting motivation factors and abating the determinant factors identified in this study.

Contribution of Illicit Drug Use to Pharmaceutical Load in the Environment: A Focus on Sub-Saharan Africa.

Illicit drug abuse and addiction are universal issues requiring international cooperation and interdisciplinary and multisectoral solutions. These addictive substances are utilized for recreational purposes worldwide, including in sub-Saharan Africa. On the other hand, conventional wastewater treatment facilities such as waste stabilization ponds lack the design to remove the most recent classes of pollutants such as illicit drug abuse. As a result, effluents from these treatment schemes contaminate the entire ecosystem. Public health officials are concerned about detecting these pollutants at alarming levels in some countries, with potential undesirable effects on aquatic species and increased health hazards through exposure to contaminated waters or recycling treated or untreated effluents in agriculture. Contaminants including illicit substances enter the environment by human excreta following illegal intake, spills, or through direct dumping, such as from clandestine laboratories, when their manufacturer does not follow accepted production processes. These substances, like other pharmaceuticals, have biological activity and range from pseudopersistent to highly persistent compounds; hence, they persist in the environment while causing harm to the ecosystem. The presence of powerful pharmacological agents such as cocaine, morphine, and amphetamine in water as complex combinations can impair aquatic organisms and human health. These compounds can harm human beings and ecosystem health apart from their low environmental levels. Therefore, this article examines the presence and levels of illicit substances in ecological compartments such as wastewater, surface and ground waters in sub-Saharan Africa, and their latent impact on the ecosystem. The information on the occurrences of illicit drugs and their metabolic products in the sub-Saharan Africa environment and their contribution to pharmaceutical load is missing. In this case, it is important to research further the presence, levels, distribution, and environmental risks of exposure to human beings and the entire ecosystem.

Trends towards Effective Analysis of Fluorinated Compounds Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS).

Increased demand for monitoring and identification of novel and unknown fluorinated compounds (FCs) has demonstrated the need of sensitive fluorine-specific detectors for unknown FCs in both biological and environmental matrices. Inductively coupled plasma mass spectrometry (ICP-MS) is a promising technique for analysis of FCs and has been rated as the most powerful tool in analytical chemistry. However, direct determination of fluorine using this technique is challenged by high ionization potential of fluorine together with spectral and nonspectral interferences which affect the quality of results. To enhance the quality of results, several studies have reported modifications of a conventional ICP-MS analysis procedure on sample preparation, introduction, analysis, and instrument optimization. Therefore, the focus of this study is to discuss different ICP-MS optimizations and future trends towards the effective analysis of FCs using ICP-MS.

Two-stage banana leaves wastes utilization towards mushroom growth and biogas production.

Banana leaves wastes (BL) were subjected to fungal treatment using Pleurotus ostreatus to produce edible mushrooms and biogas in the anaerobic digestion process. Effects of fungal treatment on mushrooms production, lignin degradation, trace elements compositions and biogas yield during the anaerobic digestion process were evaluated. Treatment with P.ostreatus for 36 d resulted in the production of 181 ± 19 g of edible mushrooms per 2 kg of BL with biological efficiency of 37 ± 4%. Lignin concentration in fungal treated BL decreased by 10% indicating an improvement on its digestibility. Important trace elements (Fe, Mn, Mo, Co and Ni) necessary for the improvement of the anaerobic digestion process were also significantly reduced (P < 0.05) during the fungal treatment process. The biogas yield for the fungal treated BL was 282 mL g-1 VS-1 of which this study suggests that could be improved through trace element supplementation during the anaerobic digestion process.

Sanitation and Hygiene Practices in Small Towns in Tanzania: The Case of Babati District, Manyara Region.

Formative research findings from the fast-growing Babati town were used to assess the prevalence of sanitation and hygiene practices among individuals and institutions and associated factors. A cross-sectional study involving household surveys, spot-checks, focus group discussions, in-depth interviews, and structured observations of behaviors showed that 90% of households have sanitation facilities, but 68% have safely managed sanitation services. The most common types of household sanitation facilities were pit latrines with slab (42%) followed by flush/pour flush toilets (32%). Therefore, the management of wastewater depends entirely on onsite sanitation systems. The majority of households (70%) do not practice proper hygiene behaviors. Thirteen percent of the households had handwashing stations with soap and water, handwashing practice being more common to women (38%) than men (18%). The reported handwashing practices during the four critical moments (handwashing with soap before eating and feeding, after defecation, after cleaning child's bottom, and after touching any dirt/dust) differed from the actual/observed practices. Households connected to the town's piped water supply were more likely to practice handwashing than those not directly connected. Sanitation and hygiene behaviors of the people in the study area were seen to be influenced by sociodemographic, cultural, and economic factors. The conditions of sanitation and hygiene facilities in public places were unsatisfactory. There is an urgent need to ensure that the sanitation and hygiene services and behaviors along the value chain (from waste production/source to disposal/end point) are improved both at the household level and in public places through improved sanitation services and the promotion of effective hygiene behavior change programs integrated into ongoing government programs and planning.

Effect of Elevated Temperature on Compressive Strength and Physical Properties of Neem Seed Husk Ash Concrete.

High temperature rise mostly caused by a fire outbreak is currently becoming a threat that endangers concrete's structural performance for buildings and the safety of occupants. The behavior of concrete after fire subjection has been of much interest for the structural materials design purposes. This study investigated the physical properties and the compressive strength of M25 concrete incorporating Neem Seed Husk Ash (NSHA), exposed to and through targeted different levels of temperature (200 °C to 800 °C) for a period of three hours in an electric furnace. The NSHA was produced by calcining neem seed husks at 800 °C for six hours and then sieved through the 125 µm sieve. Different amounts of NSHA were investigated while considering the plain concrete as the control sample. 150 concrete cubes of 150 mm sizes were cast and properly cured for 7 and 28 days. The experimental results show that the compressive strength of the 5% NSHA concrete exposed to temperatures up to 400 °C is 21.3% and 23.8% better than the normal concrete at 7 and 28 curing days, respectively. Surface cracks and spalling are noticeable at 600 °C and 800 °C for all samples considered in this study.

Harmful algal bloom and associated health risks among users of Lake Victoria freshwater: Ukerewe Island, Tanzania.

There is a global concern regarding the occurrences of harmful algal blooms (HABs) and their effects on human health. Lake Victoria (LV) has been reported to face eutrophication challenges, resulting in an increase of bloom-forming cyanobacteria. This study is aimed at understanding the association of HABs and health risks at Ukerewe Island. A cross-sectional study conducted on 432 study subjects and water samples for cyanobacteria species identification were collected at LV shores. The results reveal that concentrations of cyanobacteria cells are beyond (WHO) acceptable limits; species of Microcystis aeruginosa range from 90,361.63 to 3,032.031.65 cells/mL and Anabaena spp. range from 13,310.00 to 4,814,702 cells/mL. Water usage indicates that 31% use lake water, 53% well water and 16% treated supplied pipe water. Vomiting and throat irritation was highly reported by lake water users as compared to wells and pipe water (P < 0.001). Gastrointestinal illness (GI) was significantly elevated among lake water users as compared to pipe and well water users (P < 0.001). Visible blooms in lake water were associated with GI, skin irritation and vomiting as compared to water without visible blooms (P < 0.001). The concentration of cyanobacteria blooms poses greater risks when water is used without treatment.

What Proportion Counts? Disaggregating Access to Safely Managed Sanitation in an Emerging Town in Tanzania.

Sustainable Development Goal (SDG) 6.2 sets an ambitious target of leaving no-one without adequate and equitable sanitation by 2030. The key concern is the lack of local human and financial capital to fund the collection of reliable information to monitor progress towards the goal. As a result, national and local records may be telling a different story of the proportion of safely managed sanitation that counts towards achieving the SDG. This paper unveils such inconsistency in sanitation data generated by urban authorities and proposes a simple approach for collecting reliable and verifiable information on access to safely managed sanitation. The paper is based on a study conducted in Babati Town Council in Tanzania. Using a smartphone-based survey tool, city health officers were trained to map 17,383 housing units in the town. A housing unit may comprise of two or more households. The findings show that 5% practice open defecation, while 82% of the housing units have some form of sanitation. Despite the extensive coverage, only 31% of the fecal sludge generated is safely contained, while 64% is not. This study demonstrates the possibility of using simple survey tools to collect reliable data for monitoring progress towards safely managed sanitation in the towns of global South.

Water-Handling Patterns and Associated Microbial Profiles in relation to Hygiene in Babati Town, Tanzania.

Introduction: In rapidly urbanizing centres in Tanzania, water supply infrastructure lags behind the speed of urbanization, affecting water availability and accessibility. We believe that inhabitants' access water using various ways which are characterizable and understanding them could inform about the risks to hygiene-related diseases. This study aimed at characterizing water-handling chains and their microbial profiles in Babati town to inform hygiene education policy and water supply planning. Methodology: A cross-sectional study design employing a proportional sampling for each of the 8 wards was conducted between November 2016 and March 2017. A total of 564 samples of water were collected using the USA EPA procedures from 37 randomly selected households. Water samples were collected from the common sources of water as well as from the downstream points to multiple storage containers. Using EPA membrane filtration techniques, two microorganisms were tested: fecal coliforms and Salmonella typhi. Results. Three water-handling chains/patterns in Babati town were determined, and they were as follows: (i) untreated-source-to-treated-reservoir-to-households (untrS2trR2HH) chain, (ii) untreated-source-to-untreated-reservoir-to-households (untrS2untrR2HH) chain; (iii) untreated-source-straight-to-households (untrS2HH) chain. In terms of the microbial profile, the most contaminated water-handling chain was the untreated-source-straight-to-households (untrS2HH). The number of users in these three chains was not statistically significantly different (p=0.5226), meaning that all people utilized the various chains almost equally, depending on the water situation. Most households (83%) did not treat their drinking water making those using the untreated-source-to-household chain (untrS2HH) most vulnerable to waterborne diseases. Conclusion: Determination of water-handling chains among the household is a novel approach which allows an understanding of the points at which highest fecal loading occurs. This approach therefore may inform the development of policies in the areas of household hygiene education, drinking water treatment, and water supply planning in urbanized towns in Tanzania and other developing countries.

Crustacean derived calcium phosphate systems: Application in defluoridation of drinking water in East African rift valley.

Calcium phosphate adsorbents, derived from prawns and crabs shell biomass wastes have been developed using wet chemistry and low temperature treatment. The adsorbents were characterized by X-ray diffractometry and Fourier transform infrared spectroscopy. Batch adsorption test were carried out to investigate their effectiveness in adsorption of fluoride from ground and surface waters. Adsorption capacities were compared with bone char and synthetic hydroxyapatite (CCHA). Results indicate that prawns derived adsorbent (PHA) formed hexagonal structure with phases identifiable with hydroxyapatite while crabs based adsorbent (CHA) formed predominantly monoclinic structure with crystalline phase characteristic of brushite. Vibrational analysis and kinetic studies predicted defluoridation occurred mainly by ion exchange and ion adsorption mechanisms. Defluoridation capacity of the adsorbents was found to be superior compared to bone char and CCHA. CHA was the most effective with efficiencies above 92% and highest capacity of 13.6 mg/g in field water with fluoride concentration of 5-70 mg/L. PHA had highest capacity of 8.5 mg/g which was still better than 2.6 mg/g recorded by CCHA and bone char. Adsorption was best described by pseudo 2nd order kinetics. The findings indicate that crustacean derived calcium phosphate systems have better potential for defluoridation than traditional bone char and synthetic systems.

Electrocatalytic recycling of CO2 and small organic molecules.

As global warming directly affects the ecosystems and humankind in the 21st century, attention and efforts are continuously being made to reduce the emission of greenhouse gases, especially carbon dioxide (CO2). In addition, there have been numerous efforts to electrochemically convert CO2 gas to small organic molecules (SOMs) and vice versa. Herein, we highlight recent advances made in the electrocatalytic recycling of CO2 and SOMs including (i) the overall trend of research activities made in this area, (ii) the relations between reduction conditions and products in the aqueous phase, (iii) the challenges in the use of gas diffusion electrodes for the continuous gas phase CO2 reduction, as well as (iv) the development of state of the art hybrid techniques for industrial applications. Perspectives geared to fully exploit the potential of zero-gap cells for CO2 reduction in the gaseous phase and the high applicability on a large scale are also presented. We envision that the hybrid system for CO2 reduction supported by sustainable solar, wind, and geothermal energies and waste heat will provide a long term reduction of greenhouse gas emissions and will allow for continued use of the abundant fossil fuels by industries and/or power plants but with zero emissions.