Atypicalities of Gesture Form and Function in Autistic Adults.

While well-represented on clinical measures, co-speech gesture production has never been formally studied in autistic adults. Twenty-one verbally fluent autistic adults and 21 typically developing controls engaged in a controlled conversational task. Group differences were observed in both semantic/pragmatic and motoric features of spontaneously produced co-speech gestures. Autistic adults prioritized different functions of co-speech gesture. Specifically, they used gesture more than controls to facilitate conversational turn-taking, demonstrating a novel nonverbal strategy for regulating conversational dynamics. Autistic adults were more likely to gesture unilaterally than bilaterally, a motoric feature of gesture that was individually associated with autism symptoms. Co-speech gestures may provide a link between nonverbal communication symptoms and known differences in motor performance in autism.

Single-pulse x-ray diffraction using polycapillary optics for in situ dynamic diffraction.

Diagnostic use of single-pulse x-ray diffraction (XRD) at pulsed power facilities can be challenging due to factors such as the high flux and brightness requirements for diffraction and the geometric constraints of experimental platforms. By necessity, the x-ray source is usually positioned very close, within a few inches of the sample. On dynamic compression platforms, this puts the x-ray source in the debris field. We coupled x-ray polycapillary optics to a single-shot needle-and-washer x-ray diode source using a laser-based alignment scheme to obtain high-quality x-ray diffraction using a single 16 ns x-ray pulse with the source >1 m from the sample. The system was tested on a Mo sample in reflection geometry using 17 keV x-rays from a Mo anode. We also identified an anode conditioning effect that increased the x-ray intensity by 180%. Quantitative measurements of the x-ray focal spot produced by the polycapillary yielded a total x-ray flux on the sample of 3.3 ± 0.5 × 10(7) molybdenum Kα photons.

Dynamic Behavior of Engineered Lattice Materials.

Additive manufacturing (AM) is enabling the fabrication of materials with engineered lattice structures at the micron scale. These mesoscopic structures fall between the length scale associated with the organization of atoms and the scale at which macroscopic structures are constructed. Dynamic compression experiments were performed to study the emergence of behavior owing to the lattice periodicity in AM materials on length scales that approach a single unit cell. For the lattice structures, both bend and stretch dominated, elastic deflection of the structure was observed ahead of the compaction of the lattice, while no elastic deformation was observed to precede the compaction in a stochastic, random structure. The material showed lattice characteristics in the elastic response of the material, while the compaction was consistent with a model for compression of porous media. The experimental observations made on arrays of 4 × 4 × 6 lattice unit cells show excellent agreement with elastic wave velocity calculations for an infinite periodic lattice, as determined by Bloch wave analysis, and finite element simulations.

Phase Transformation in Tantalum under Extreme Laser Deformation.

The structural and mechanical response of metals is intimately connected to phase transformations. For instance, the product of a phase transformation (martensite) is responsible for the extraordinary range of strength and toughness of steel, making it a versatile and important structural material. Although abundant in metals and alloys, the discovery of new phase transformations is not currently a common event and often requires a mix of experimentation, predictive computations, and luck. High-energy pulsed lasers enable the exploration of extreme pressures and temperatures, where such discoveries may lie. The formation of a hexagonal (omega) phase was observed in recovered monocrystalline body-centered cubic tantalum of four crystallographic orientations subjected to an extreme regime of pressure, temperature, and strain-rate. This was accomplished using high-energy pulsed lasers. The omega phase and twinning were identified by transmission electron microscopy at 70 GPa (determined by a corresponding VISAR experiment). It is proposed that the shear stresses generated by the uniaxial strain state of shock compression play an essential role in the transformation. Molecular dynamics simulations show the transformation of small nodules from body-centered cubic to a hexagonal close-packed structure under the same stress state (pressure and shear).

Grain-size-independent plastic flow at ultrahigh pressures and strain rates.

A basic tenet of material science is that the flow stress of a metal increases as its grain size decreases, an effect described by the Hall-Petch relation. This relation is used extensively in material design to optimize the hardness, durability, survivability, and ductility of structural metals. This Letter reports experimental results in a new regime of high pressures and strain rates that challenge this basic tenet of mechanical metallurgy. We report measurements of the plastic flow of the model body-centered-cubic metal tantalum made under conditions of high pressure (>100 GPa) and strain rate (∼10(7) s(-1)) achieved by using the Omega laser. Under these unique plastic deformation ("flow") conditions, the effect of grain size is found to be negligible for grain sizes >0.25 µm sizes. A multiscale model of the plastic flow suggests that pressure and strain rate hardening dominate over the grain-size effects. Theoretical estimates, based on grain compatibility and geometrically necessary dislocations, corroborate this conclusion.

Spectral content of buried Ag foils at 10(16) W/cm(2) laser illumination.

Sources of 5-12 keV thermal Heα x-rays are readily generated by laser irradiation of mid-Z foils at intensities >10(14) W/cm(2), and are widely used as probes for inertial confinement fusion and high-energy-density experiments. Higher energy 17-50 keV x-ray sources are efficiently produced from "cold" Kα emission using short pulse, petawatt lasers at intensities >10(18) W/cm(2) [H.-S. Park, B. R. Maddox et al., "High-resolution 17-75 keV backlighters for high energy density experiments," Phys. Plasmas 15(7), 072705 (2008); B. R. Maddox, H. S. Park, B. A. Remington et al., "Absolute measurements of x-ray backlighter sources at energies above 10 keV," Phys. Plasmas 18(5), 056709 (2011)]. However, when long pulse (>1 ns) lasers are used with Z > 30 elements, the spectrum contains contributions from both K shell transitions and from ionized atomic states. Here we show that by sandwiching a silver foil between layers of high-density carbon, the ratio of Kα:Heα in the x-ray spectrum is significant increased over directly illuminated Ag foils, with narrower lines from K-shell transitions. Additionally, the emission volume is more localized for the sandwiched target, producing a more planar x-ray sheet. This technique may be useful for generating probes requiring spectral purity and a limited spatial extent, for example, in incoherent x-ray Thomson scattering experiments.

Strength of shock-loaded single-crystal tantalum [100] determined using in situ broadband x-ray Laue diffraction.

The strength of shock-loaded single crystal tantalum [100] has been experimentally determined using in situ broadband x-ray Laue diffraction to measure the strain state of the compressed crystal, and elastic constants calculated from first principles. The inferred strength reaches 35 GPa at a shock pressure of 181 GPa and is in excellent agreement with a multiscale strength model [N. R. Barton et al., J. Appl. Phys. 109, 073501 (2011)], which employs a hierarchy of simulation methods over a range of length scales to calculate strength from first principles.

X-ray emission spectroscopy of cerium across the γ-α volume collapse transition.

High-pressure x-ray emission measurements are used to provide crucial evidence in the longstanding debate over the nature of the isostructural (α, γ) volume collapse in elemental cerium. Extended local atomic model calculations show that the satellite of the Lγ emission line offers direct access to the total angular momentum observable (J(2)). This satellite experiences a 30% steplike decrease across the volume collapse, validating the Kondo model in conjunction with previous measurements. Direct comparisons are made with previous predictions by dynamical mean field theory. A general experimental methodology is demonstrated for analogous work on a wide range of strongly correlated f-electron systems.

Spectral analysis of x-ray emission created by intense laser irradiation of copper materials.

We have measured the x-ray emission, primarily from K(α),K(ß), and He(α) lines, of elemental copper foil and "foam" targets irradiated with a mid-10(16) W/cm(2) laser pulse. The copper foam at 0.1 times solid density is observed to produce 50% greater He(α) line emission than copper foil, and the measured signal is well-fit by a sum of three synthetic spectra generated by the atomic physics code FLYCHK. Additionally, spectra from both targets reveal characteristic inner shell K(α) transitions from hot electron interaction with the bulk copper. However, only the larger-volume foam target produced significant K(ß) radiation, confirming a lower bulk temperature in the higher volume sample.

High-energy x-ray backlighter spectrum measurements using calibrated image plates.

The x-ray spectrum between 18 and 88 keV generated by a petawatt laser driven x-ray backlighter target was measured using a 12-channel differential filter pair spectrometer. The spectrometer consists of a series of filter pairs on a Ta mask coupled with an x-ray sensitive image plate. A calibration of Fuji™ MS and SR image plates was conducted using a tungsten anode x-ray source and the resulting calibration applied to the design of the Ross pair spectrometer. Additionally, the fade rate and resolution of the image plate system were measured for quantitative radiographic applications. The conversion efficiency of laser energy into silver Kα x rays from a petawatt laser target was measured using the differential filter pair spectrometer and compared to measurements using a single photon counting charge coupled device.

Characterizing high energy spectra of NIF ignition Hohlraums using a differentially filtered high energy multipinhole x-ray imager.

Understanding hot electron distributions generated inside Hohlraums is important to the national ignition campaign for controlling implosion symmetry and sources of preheat. While direct imaging of hot electrons is difficult, their spatial distribution and spectrum can be deduced by detecting high energy x-rays generated as they interact with target materials. We used an array of 18 pinholes with four independent filter combinations to image entire Hohlraums with a magnification of 0.87× during the Hohlraum energetics campaign on NIF. Comparing our results with Hohlraum simulations indicates that the characteristic 10-40 keV hot electrons are mainly generated from backscattered laser-plasma interactions rather than from Hohlraum hydrodynamics.

Bragg diffraction using a 100 ps 17.5 keV x-ray backlighter and the Bragg diffraction imager.

A new diagnostic for measuring Bragg diffraction of petawatt-generated high-energy x rays off a laser-compressed crystal was designed and tested successfully at the Omega EP laser facility on static Mo and Ta (111) oriented single crystal samples using a 17.5 keV Mo Kα backlighter. The Bragg diffraction imager consists of a heavily shielded enclosure and a precisely positioned beam block attached to the enclosure by an aluminum arm. Fuji image plates are used as the x-ray detectors. The diffraction from Mo and Ta (222) crystal planes was clearly detected with a high signal-to-noise. This technique will be applied to shock- and quasi-isentropically loaded single crystals on the Omega EP laser.

Development of a short duration backlit pinhole for radiography on the National Ignition Facility.

Experiments on the National Ignition Facility (NIF) will require bright, short duration, near-monochromatic x-ray backlighters for radiographic diagnosis of many high-energy density systems. This paper details a vanadium pinhole backlighter producing (1.8±0.5)×10(15) x-ray photons into 4π sr near the vanadium He-like characteristic x-ray energy of 5.18 keV. The x-ray yield was quantified from a set of Ross filters imaged to a calibrated image plate, with the Dante diagnostic used to confirm the quasimonochromatic nature of the spectrum produced. Additionally, an x-ray film image shows a source-limited image resolution of 26 µm from a 20 µm diameter pinhole.

Calibration and characterization of single photon counting cameras for short-pulse laser experiments.

The x-ray photon counting efficiency of various charged-coupled device (CCD) based cameras was studied as a function of photon energy and exposure. A pair of Spectral Instruments model 800 CCD cameras fitted with 16 microm thick back-illuminated CCDs were calibrated at low x-ray energy using two well established histogram methods. In addition, two new thick substrate CCDs were evaluated for use at high energy. One was a commercially available Princeton Instruments PI-LCX1300 deep depletion CCD camera, while the other used a custom designed 650 microm thick partially depleted CCD fitted to a Spectral Instruments model 800 camera body. It is shown that at high x-ray energy, a pixel-summing algorithm is necessary to reconstruct the x-ray spectra in the thicker substrate CCDs. This paper will describe the different algorithms used to extract spectra and the absolute detection efficiencies using these algorithms. These detectors and algorithms will be very useful in detecting high-energy x-ray photons from high-intensity short-pulse laser interactions.

4f delocalization in Gd: inelastic x-ray scattering at ultrahigh pressure.

We present resonant inelastic x-ray scattering and x-ray emission spectroscopy results on Gd metal to 113 GPa which suggest Kondo-like aspects in the delocalization of 4f electrons. Analysis of the resonant inelastic x-ray scattering data reveals a prolonged and continuous delocalization with volume throughout the entire pressure range, so that the volume-collapse transition at 59 GPa is only part of the phenomenon. Moreover, the Lgamma1 x-ray emission spectroscopy spectra indicate no apparent change in the bare 4f moment across the collapse, suggesting that Kondo screening is responsible for the expected Pauli-like behavior in magnetic susceptibility.

New cubic phase of Li3N: stability of the N3- ion to 200 GPa.

Diamond-anvil cell experiments augmented by first-principles calculations have found a remarkable stability of the N(3-) ion in Li3N to a sixfold volume reduction. A new (gamma) phase is discovered above 40(+/-5) GPa, with an 8% volume collapse and a band gap quadrupling at the transition determined by synchrotron x-ray diffraction and inelastic x-ray scattering. gamma-Li(3)N (Fm3m, Li(3)Bi-like structure) remains stable up to 200 GPa, and calculations do not predict metallization until approximately 8 TPa. The high structural stability, wide band gap, and simple electronic structure make this N(3-) based system analogous to lower valency compounds (MgO, NaCl, Ne), meriting its use as an internal pressure standard.

First-order isostructural Mott transition in highly compressed MnO.

We present evidence for an isostructural, first-order Mott transition in MnO at 105+/-5 GPa, based on high-resolution x-ray emission spectroscopy and angle-resolved x-ray diffraction data. The pressure-induced structural and spectral changes provide a coherent picture of MnO phase transitions from paramagnetic B1 to antiferromagnetic distorted B1 at 30 GPa, to paramagnetic B8 at 90 GPa, and to diamagnetic B8 at 105+/-5 GPa. The last is the Mott transition, accompanied by a significant loss of magnetic moment, an approximately 6.6% volume collapse and the insulator-metal transition as demonstrated by recent resistance measurements.

Y-position collagen II mutation disrupts cartilage formation and skeletal development in a transgenic mouse model of spondyloepiphyseal dysplasia.

Mice were generated by pronuclear injection of a type II collagen transgene harboring an Arg789Cys (R789C) mutation that has been found in patients with spondyloepiphyseal dysplasia (SED). Expression was directed to cartilage by the murine Col2a1 promoter to examine the consequences of mutations involving the Y-position of the collagen helix Gly-X-Y triplet on skeletogenesis. The transgenic mice had very short limbs, short trunk, short snout, and cleft palate; they died at birth. Their growth plates were disorganized and collagen fibrils were sparse in cartilage matrix. When the transgene was expressed in RCS cells, there was no evidence that R789C-bearing collagen chains were incorporated into stable collagen molecules. Molecular modeling of the mutation raised the possibility that it destabilizes the collagen triple helix. Together our results suggest that Y-position mutations, such as R789C, can act in a dominant negative manner to destabilize collagen molecules during assembly, reducing their availability to form fibrils, the deficiency of which profoundly disturbs the template functions of cartilage during skeletogenesis.

Postoperative inflammation, microbial complications, and wound healing following laser in situ keratomileusis.

Although the biology of corneal wound healing is only partly understood, healing after photorefractive keratectomy (PRK) and laser in situ keratomileusis (LASIK) differs in many respects, and the mechanisms appear to be differently controlled. There is less of an inflammatory and healing response after LASIK, but a longer period of sensory denervation. The cellular, molecular, and neural regulatory phenomena associated with postoperative inflammation and wound healing are likely to be involved in the adverse effects after LASIK, such as flap melt, epithelial ingrowth, and regression. Interface opacities in the early postoperative period include diffuse lamellar keratitis (DLK), microbial keratitis, epithelial cells, and interface opacities. Diffuse lamellar keratitis (sands of the Sahara syndrome) describes an apparently noninfectious diffuse interface inflammation after lamellar corneal surgery probably caused by an allergic or a toxic inflammatory reaction. Noninfectious keratitis must be distinguished from microbial keratitis to avoid aggressive management and treatment with antimicrobial drugs. Microbial keratitis is a serious complication after LASIK, but a good visual outcome can be achieved following prompt and appropriate treatment.