Preparation and characterization of various PVPylated divalent metal-doped ferrite nanoparticles for magnetic hyperthermia.

There is an incessant demand to keep improving on the heating responses of polymeric magnetic nanoparticles (MNPs) under magnetic excitation, particularly in the pursuit for them to be utilized for clinical hyperthermia applications. Herein, we report the fabrication of a panel of PVP-capped divalent metal-doped MFe2O4 (M ≅ Co, Ni, Zn, Mg, and Sn) MNPs prepared via the Ko-precipitation Hydrolytic Basic (KHB) methodology and assess their magneto-thermal abilities. The physiochemical, structural, morphological, compositional, and magnetic properties of the doped ferrites were fully characterized using various techniques mainly TEM, XRD, EDX, FTIR, and VSM. The obtained doped MNPs exhibited stabilized quasi-spherical sized particles (10-17 nm), pure well-crystallized cubic spinel phases, and high saturation magnetizations (Ms = 26-81 emu g-1). In response to a clinically-safe alternating magnetic field (AMF) (f = 332.8 kHz and H = 170 Oe), distinctive heating responses of these doped ferrites were attained. Hyperthermia temperatures of 42 °C can be reached very fast in only ∼5 min, with heating temperatures slowly increasing to reach up to 55 °C. The highest heating performance was observed for PVP-NiFe2O4 and the lowest for PVP-Sn-doped NPs (SAR values: PVP-NiFe2O4 > PVP-CoFe2O4 > PVP-ZnFe2O4 > PVP-MgFe2O4 > PVP-SnFe2O4). This trend was found to be directly correlated to their observed magnetic saturation and anisotropy. Heating efficiencies and specific SAR values as functions of concentration, frequency, and amplitude were also systematically investigated. Finally, cytotoxicity assay was conducted on aqueous dispersions of the doped ferrite NPs, proving their biocompatibility and safety profiles. The PVPylated metal-doped ferrite NPs prepared here, particularly Ni- and Co-doped ferrites, are promising vehicles for potential combined magnetically-triggered biomedical hyperthermia applications.

Biosynthesis, characterization, magnetic hyperthermia, and in vitro toxicity evaluation of quercetin-loaded magnetoliposome lipid bilayer hybrid system on MCF-7 breast cancer.

Novel biocompatible and effective hyperthermia (HT) treatment materials for breast cancer therapeutic have recently attracting researchers, because of their effective ablation of cancer cells and negligible damage to healthy cells. Magnetoliposome (MLs) have numerous possibilities for utilize in cancer treatment, including smart drug delivery (SDD) mediated through alternating magnetic fields (AMF). In this work, magnesium ferrite (MgFe2O4) encapsulated with liposomes lipid bilayer (MLs), Quercetin (Q)-loaded MgFe2O4@Liposomes (Q-MLs) nano-hybrid system were successfully synthesized for magnetic hyperthermia (MHT) and SDD applications. The hybrid system was well-investigated by different techniques using X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FT-IR), Energy dispersive X-ray (EDX), Vibrating sample magnetometer (VSM), Transmission electron microscope (TEM), and Zeta Potential (ZP). The characterization results confirmed the improving quercetin-loading on the MLs surface. TEM analysis indicated the synthesized MgFe2O4, MLs, and Q-MLs were spherical with an average size of 23.7, 35.5, and 329.5 nm, respectively. The VSM results revealed that the MgFe2O4 exhibit excellent and effective saturation magnetization (MS) (40.5 emu/g). Quercetin drug loading and entrapment efficiency were found to be equal to 2.1 ± 0.1% and 42.3 ± 2.2%, respectively. The in-vitro Q release from Q-loaded MLs was found 40.2% at pH 5.1 and 69.87% at pH 7.4, verifying the Q-loading pH sensitivity. The MLs and Q-MLs hybrid system as MHT agents exhibit specific absorption rate (SAR) values of 197 and 205 W/g, correspondingly. Furthermore, the Q-MLs cytotoxicity was studied on the MCF-7 breast cancer cell line, and the obtained data demonstrated that the Q-MLs have a high cytotoxicity effect compared to MLs and free Q.

Recent advances in the hybridization of cellulose and semiconductors: Design, fabrication and emerging multidimensional applications: A review.

Cellulose is a plentiful, biodegradable, renewable, and natural polymer in the world that can be widely utilized in the production of polymer nanocomposites. Cellulose is developed in nanomaterials owing to its remarkable inherent features of low density, non-toxicity, and affordability, as well as the amazing sample characteristics of strength and thermal stability. Recently, there has been a lot of interest in organic-inorganic composites because of their adaptable qualities. Cellulose and semiconductors have exciting properties, and new combinations of both materials may result in efficient functional hybrid composites with distinct properties. Lately, a huge study was reported on cellulose and semiconductor-based nanocomposites. In this review, we summarize the present research development in the preparation methods, structure, features, and possible applications of multifunctional cellulose and semiconductor-based nanocomposites. The cellulose/semiconductor based nanocomposites have massive potential applications in the areas of photodegradation of organic dyes, hydrogen production, metal removal, biomedical, and sensor applications. It is also assumed that this article will promote additional investigation and will establish innovative capabilities to enhance novel cellulose and semiconductor based nanocomposites with new and exciting applications.

Assessing the Heat Generation and Self-Heating Mechanism of Superparamagnetic Fe3O4 Nanoparticles for Magnetic Hyperthermia Application: The Effects of Concentration, Frequency, and Magnetic Field.

Magnetite nanoparticles (MNPs) exhibit favorable heating responses under magnetic excitation, which makes them particularly suited for various hyperthermia applications. Herein, we report the detailed self-heating mechanisms of MNPs prepared via the Ko-precipitation Hydrolytic Basic (KHB) methodology. The as-prepared MNPs were fully characterized using various spectroscopic techniques including transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometry (VSM). MNPs exhibited stable 15 nm quasi-spherical small-sized particles, pure crystalline cubic Fe3O4 phases, high saturation magnetizations (Ms = ~40 emu·g-1), and superparamagnetic behavior. In response to alternating magnetic fields (AMFs), these MNPs displayed excellent self-heating efficiencies with distinctive heating responses, even when minimal doses of MNPs were used. Heating efficacies and specific absorption rate (SAR) values as functions of concentration, frequency, and amplitude were systematically investigated. Remarkably, within only a few minutes, MNPs (2.5 mg/mL) showed a rapid dissipation of heat energy, giving a maximum intrinsic loss power (ILP) of 4.29 nHm2/kg and a SAR of 261 W/g. Hyperthermia temperatures were rapidly reached in as early as 3 min and could rise up to 80 °C. In addition, Rietveld refinement, Langevin, and linear response theory (LRT) models were studied to further assess the magnetic and heating mechanisms. The LRT model was used to determine the Néel relaxation time (τR = 5.41 × 10-7 s), which was compared to the Brownian relation time value (τB = 11 × 10-7 s), showing that both mechanisms are responsible for heat dissipated by the MNPs. Finally, the cytotoxicity assay was conducted on aqueous dispersions of MNPs, indicating their biocompatibility and low toxicity. Our results strongly suggest that the as-prepared Fe3O4 MNPs are promising vehicles for potential magnetically triggered biomedical hyperthermia applications.

Thermal Diffusivity and Conductivity of Polyolefins by Thermal Lens Technique.

A mode-mismatched thermal lens spectrometry (TLS) technique, in a pump-probe two-laser-beam configuration, was employed for the experimental determination of the thermal properties of four selected well-characterized polyolefin homopolymer films. We investigated the thermal diffusivity (D) and thermal conductivity (κ) of high-density polyethylene, low-density polyethylene, linear low-density polyethylene, and polypropylene. We also measured the structural properties (i.e., average molecular weight, polydispersity index, branching number), along with the rheological and thermal properties (i.e., melting point, specific heat capacity Cp, degree of crystallinity) of samples by high-temperature gel permeation chromatography (HT-GPC), rheometric mechanical spectrometry (RMS), differential scanning calorimetry (DSC), and densitometry. The relationship between microstructural properties such as degree of crystallinity, D, and κ was investigated. The results show that there is good correlation between the degree of crystallinity and D. The TL technique enables measurement of D in semitransparent thin films within an uncertainty of 4%.

Rapid Synthesis of Hexagonal-Shaped Zn(Al)O-MMO Nanorods for Dye-Sensitized Solar Cell Using Zn/Al-LDH as Precursor.

This study reports a simple new technique for the preparation of novel hexagonal-shaped mixed metal oxides (MMO) nanorods using Zn/Al-layered double hydroxide (LDH) as a precursor for dye-sensitized solar cell (DSSC) application. The effect of the Zn to Al molar ratio demonstrated a sound correlation between the obtained nanorods' diameter and the fabricated DSSCs efficiency. Additionally, the optical behavior of the fabricated MMO film as well as the absorption enhancement due to the utilized dye are also demonstrated; a cut-off phenomenon at around 376 nm corresponds to the attained hexagonal nanorods. The open-circuit voltage augmented noticeably from 0.6 to 0.64 V alongside an increase in the diameter of nanorods from 64 to 80 nm. The results indicated that an increment in the diameter of the nanorods is desirable due to the enhanced surface area through which a higher amount of dye N719 was loaded (0.35 mM/cm2). This, in turn, expedited the transport of electrons within the MMO matrix resulting in an advanced short-circuit current. Of the devices fabricated, ZA-8 exhibited the highest fill factor and efficiency of 0.37% and 0.69%, respectively, because of its boosted short-circuit current and open-circuit voltage.

A Continuously Tunable Full-Color Emission Nitrogen-Doped Carbon Dots and for Ultrasensitive and Highly Selective Detection of Ascorbic Acid.

Nitrogen-doped carbon dots exhibiting excitation-dependent full-color emissions (F-NCDs) were prepared via the one-step hydrothermal method with citric acid and phenylenediamine. Specifically, the emission wavelength of the F-NCDs tuned from 452 nm to 602 nm due to the introduction of new energy levels by C=O and C=N functional groups. We exploited its stability in illumination, ionic strength, and pH, as well as its specificity, sensitivity, especially in ascorbic acid (AA) detection. F-NCDs could measure the AA concentration in the linear ranges of 0~0.1 and 0.1~1 mmol/L with the detection limit (LOD, S/N = 3) as low as 2.6 nmol/L. Additionally, we successfully detected AA in bovine serum with our F-NCDs and obtained the result within 1 min. Because of full-color emission features, we believe our F-NCDs have a great potential in fluorescent sensor detection.

Maghemite (γ-Fe2O3) and γ-Fe2O3-TiO2 Nanoparticles for Magnetic Hyperthermia Applications: Synthesis, Characterization and Heating Efficiency.

In this report, the heating efficiencies of γ-Fe2O3 and hybrid γ-Fe2O3-TiO2 nanoparticles NPs under an alternating magnetic field (AMF) have been investigated to evaluate their feasible use in magnetic hyperthermia. The NPs were synthesized by a modified sol-gel method and characterized by different techniques. X-ray diffraction (XRD), Mössbauer spectroscopy and electron microscopy analyses confirmed the maghemite (γ-Fe2O3) phase, crystallinity, good uniformity and 10 nm core sizes of the as-synthesized composites. SQUID hysteresis loops showed a non-negligible coercive field and remanence suggesting the ferromagnetic behavior of the particles. Heating efficiency measurements showed that both samples display high heating potentials and reached magnetic hyperthermia (42 °C) in relatively short times with shorter time (~3 min) observed for γ-Fe2O3 compared to γ-Fe2O3-TiO2. The specific absorption rate (SAR) values calculated for γ-Fe2O3 (up to 90 W/g) are higher than that for γ-Fe2O3-TiO2 (~40 W/g), confirming better heating efficiency for γ-Fe2O3 NPs. The intrinsic loss power (ILP) values of 1.57 nHm2/kg and 0.64 nHm2/kg obtained for both nanocomposites are in the range reported for commercial ferrofluids (0.2-3.1 nHm2/kg). Finally, the heating mechanism responsible for NP heat dissipation is explained concluding that both Neel and Brownian relaxations are contributing to heat production. Overall, the obtained high heating efficiencies suggest that the fabricated nanocomposites hold a great potential to be utilized in a wide spectrum of applications, particularly in magnetic photothermal hyperthermia treatments.

Pleomorphism and drug resistant cancer stem cells are characteristic of aggressive primary meningioma cell lines.

BACKGROUND: Meningioma tumors arise in arachnoid membranes, and are the most reported central nervous system (CNS) tumors worldwide. Up to 20% of grade I meningioma tumors reoccur and currently predictive cancer stem cells (CSCs) markers for aggressive and drug resistant meningiomas are scarce. METHODS: Meningioma tissues and primary cell lines were investigated using whole transcriptome microarray analysis, immunofluorescence staining of CSCs markers (including CD133, Sox2, Nestin, and Frizzled 9), and drug treatment with cisplatin or etoposide. RESULTS: Unsupervised hierarchical clustering of six meningioma samples separated tissues into two groups. Analysis identified stem cells related pathways to be differential between the two groups and indicated the de-regulation of the stem cell associated genes Reelin (RELN), Calbindin 1 (CALB1) and Anterior Gradient 2 Homolog (AGR2). Immunofluorescence staining for four tissues confirmed stemness variation in situ. Biological characterization of fifteen meningioma primary cell lines concordantly separated cells into two functionally distinct sub-groups. Pleomorphic cell lines (NG type) grew significantly faster than monomorphic cell lines (G type), had a higher number of cells that express Ki67, and were able to migrate aggressively in vitro. In addition, NG type cell lines had a lower expression of nuclear Caspase-3, and had a significantly higher number of CSCs co-positive for CD133+ Sox2+ or AGR2+ BMI1+. Importantly, these cells were more tolerant to cisplatin and etoposide treatment, showed a lower level of nuclear Caspase-3 in treated cells and harbored drug resistant CSCs. CONCLUSION: Collectively, analyses of tissues and primary cell lines revealed stem cell associated genes as potential targets for aggressive and drug resistant meningiomas.