Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros










Base de dados
Assunto principal
Intervalo de ano de publicação
1.
J Chem Phys ; 161(4)2024 Jul 28.
Artigo em Inglês | MEDLINE | ID: mdl-39037147

RESUMO

Single layer graphene (SLG) was synthesized via high-quality chemical vapor deposition (CVD) on high-quality copper and subsequently transferred onto SiO2 and on n-GaAs substrates with varying doping electron concentrations (n = 1016, 1017, 5 × 1017, 1018, and 5 × 1018 cm-3). The n-GaAs substrates were grown by molecular beam epitaxy. The optical properties of the SLG were investigated through photoluminescence (PL) and Raman spectroscopy measurements. Carrier concentration n or p and Fermi energy (EF) values in SLG were determined both before and after the transfer onto n-GaAs, and these findings were validated through PL studies. The Raman spectroscopy results indicated an increase in the transfer of electrons from n-GaAs to SLG as the doping electron density in n-GaAs increased. PL analysis revealed a significant change in the bandgap energy (Eg) of n-GaAs due to bandgap narrowing and the Burstein-Moss shift. Our data enable us to determine the energy band diagrams. Upon aligning the energy bands, an increase in transferred carrier density is accompanied by changes in Fermi energies and an increase in the potential barrier (∆U). The increase in ∆U is of significant interest to ensure that charges are directed more efficiently toward the cell's electrical contacts in the case of photovoltaic application. There, they can contribute significantly to the generated electric current, thereby enhancing the performance of a cell. Our results can provide insights into the interaction in graphene-based heterostructures and aid in selecting the best parameters for developing new advanced devices.

2.
RSC Adv ; 12(55): 36002-36011, 2022 Dec 12.
Artigo em Inglês | MEDLINE | ID: mdl-36545063

RESUMO

Functionalized graphene offers great potential in the field of rapid detection of gases at room temperature. We performed first-principles calculations to study the suitability of 4-sulfobenzenediazonium salts (4SBD) as bandgap modifier in graphene. The signature of unpaired spins is evidenced near the Fermi level owing to the symmetry breaking of graphene sublattices. 4SBD-chemisorbed on graphene is found to be electronically sensitive to the presence of ammonia NH3 with increasing gas concentration.

3.
Nanotechnology ; 30(21): 214005, 2019 May 24.
Artigo em Inglês | MEDLINE | ID: mdl-30736031

RESUMO

Optical properties of GaN nanowires (NWs) grown on chemical vapor deposited-graphene transferred on an amorphous support are reported. The growth temperature was optimized to achieve a high NW density with a perfect selectivity with respect to a SiO2 surface. The growth temperature window was found to be rather narrow (815°C ± 5°C). Steady-state and time-resolved photoluminescence from GaN NWs grown on graphene was compared with the results for GaN NWs grown on conventional substrates within the same molecular beam epitaxy reactor showing a comparable optical quality for different substrates. Growth at temperatures above 820 °C led to a strong NW density reduction accompanied with a diameter narrowing. This morphology change leads to a spectral blueshift of the donor-bound exciton emission line due to either surface stress or dielectric confinement. Graphene multi-layered micro-domains were explored as a way to arrange GaN NWs in a hollow hexagonal pattern. The NWs grown on these domains show a luminescence spectral linewidth as low as 0.28 meV (close to the set-up resolution limit).

4.
Phys Rev Lett ; 109(5): 056805, 2012 Aug 03.
Artigo em Inglês | MEDLINE | ID: mdl-23006198

RESUMO

We have investigated the energy loss of hot electrons in metallic graphene by means of GHz noise thermometry at liquid helium temperature. We observe the electronic temperature T ∝ V at low bias in agreement with the heat diffusion to the leads described by the Wiedemann-Franz law. We report on T ∝ √V behavior at high bias, which corresponds to a T(4) dependence of the cooling power. This is the signature of a 2D acoustic phonon cooling mechanism. From a heat equation analysis of the two regimes we extract accurate values of the electron-acoustic phonon coupling constant Σ in monolayer graphene. Our measurements point to an important effect of lattice disorder in the reduction of Σ, not yet considered by theory. Moreover, our study provides a strong and firm support to the rising field of graphene bolometric detectors.

5.
Phys Rev Lett ; 103(2): 028104, 2009 Jul 10.
Artigo em Inglês | MEDLINE | ID: mdl-19659250

RESUMO

Coherent x-ray diffractive imaging is a powerful method for studies on nonperiodic structures on the nanoscale. Access to femtosecond dynamics in major physical, chemical, and biological processes requires single-shot diffraction data. Up to now, this has been limited to intense coherent pulses from a free electron laser. Here we show that laser-driven ultrashort x-ray sources offer a comparatively inexpensive alternative. We present measurements of single-shot diffraction patterns from isolated nano-objects with a single 20 fs pulse from a table-top high-harmonic x-ray laser. Images were reconstructed with a resolution of 119 nm from the single shot and 62 nm from multiple shots.


Assuntos
Difração de Raios X/métodos , Processamento de Imagem Assistida por Computador/métodos , Lasers
6.
Ultramicroscopy ; 109(5): 457-62, 2009 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-19046621

RESUMO

Decisive advances in the field of nanosciences and nanotechnologies are intimately related to the development of new instruments and of related writing schemes and methodologies. Therefore we have recently proposed the exploitation of the nano-structuring potential of a highly focused ion beam (FIB) as a tool, to overcome intrinsic limitations of current nano-fabrication techniques and to allow innovative patterning schemes that are urgently needed in many nanoscience challenges. In this work, we will first detail a very high-resolution FIB instrument we have developed specifically to meet these nano-fabrication requirements. Then we will introduce and illustrate an advanced FIB processing scheme that is the fabrication of artificial nanopores.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...