Selective C(aryl)-O bond cleavage in biorenewable phenolics.

Biorefining of lignocellulosic biomass via a lignin first approach delivers a range of products with high oxygen content. Besides pulp, a lignin oil rich in guaiacols and syringols is obtained bearing multiple C(aryl)-OH and C(aryl)-OMe groups, typically named phenolics. Similarly, technical lignin can be used but is generally more difficult to process providing lower yields of monomers. Removal of the hydroxy and methoxy groups in these oxygenated arenes is challenging due to the inherently strong C-O bonds, in addition to the steric and electronic deactivation by adjacent -OH or -OMe groups. Moreover, chemoselective removal of a specific group in the presence of other similar functionalities is non-trivial. Other side-reactions such as ring saturation and transalkylation further complicate the desired reduction process. In this overview, three different selective reduction reactions are considered. Complete hydrodeoxygenation removes both hydroxy and methoxy groups resulting in benzene and alkylated derivatives (BTX type products) which is often complicated by overreduction of the arene ring. Hydrodemethoxylation selectively removes methoxy groups in the presence of hydroxy groups leading to phenol products, while hydrodehydroxylation only removes hydroxy groups without cleavage of methoxy groups giving anisole products. Instead of defunctionalization via reduction transformation of C(aryl)-OH, albeit via an initial derivatization into C(aryl)-OX, into other functionalities is possible and also discussed. In addition to methods applying guaiacols and syringols present in lignin oil as model substrates, special attention is given to methods using mixtures of these compounds obtained from wood/technical lignin. Finally, other important aspects of C-O bond activation with respect to green chemistry are discussed.

Rhodium-Catalyzed Direct ortho-Arylation of Anilines.

An efficient and broadly applicable rhodium-catalyzed direct ortho-arylation of anilines with aryl iodides relying on readily available aminophosphines as traceless directing groups is reported. Its scope and functional group compatibility were both found to be quite broad as a large variety of both aminophosphines and (hetero)aryl iodides, including complex ones, could be utilized. The ortho-arylated anilines could be obtained in high average yields, without any competing diarylation and with full regioselectivity, which constitutes a major step forward compared to other processes. The reaction is moreover not limited to aryl iodides, as an aryl bromide and a triflate could be successfully used, and could be extended to diarylation. Mechanistic studies revealed the key and unique role of the aminophosphine, acting not only as a substrate but also as a ligand for the rhodium catalyst.

Advancements and Perspectives toward Lignin Valorization via O-Demethylation.

Lignin represents the largest aromatic carbon resource in plants, holding significant promise as a renewable feedstock for bioaromatics and other cyclic hydrocarbons in the context of the circular bioeconomy. However, the methoxy groups of aryl methyl ethers, abundantly found in technical lignins and lignin-derived chemicals, limit their pertinent chemical reactivity and broader applicability. Unlocking the phenolic hydroxyl functionality through O-demethylation (ODM) has emerged as a valuable approach to mitigate this need and enables further applications. In this review, we provide a comprehensive summary of the progress in the valorization of technical lignin and lignin-derived chemicals via ODM, both catalytic and non-catalytic reactions. Furthermore, a detailed analysis of the properties and potential applications of the O-demethylated products is presented, accompanied by a systematic overview of available ODM reactions. This review primarily focuses on enhancing the phenolic hydroxyl content in lignin-derived species through ODM, showcasing its potential in the catalytic funneling of lignin and value-added applications. A comprehensive synopsis and future outlook are included in the concluding section of this review.

Dearomative Spirocyclization of Tryptamine-Derived Isocyanides via Iron-Catalyzed Carbene Transfer.

Tryptamine-derived isocyanides are valuable building blocks in the construction of spirocyclic indolenines and indolines via dearomatization of the indole moiety. We report the Bu4N[Fe(CO)3NO]-catalyzed carbene transfer of α-diazo esters to 3-(2-isocyanoethyl)indoles, leading to ketenimine intermediates that undergo spontaneous dearomative spirocyclization. The utility of this iron-catalyzed carbene transfer/spirocyclization cascade was demonstrated by its use as a key step in the formal total synthesis of monoterpenoid indole alkaloids (±)-aspidofractinine, (±)-limaspermidine, (±)-aspidospermidine, and (±)-17-demethoxy-N-acetylcylindrocarine.

Synthesis of Levulinic Acids From Muconic Acids in Hot Water.

Levulinic acid is a key biorenewable platform molecule. Its current chemical production from sugars is plagued by limited yields, char formation and difficult separations. An alternative and selective route starting from muconic acid via simple heating in water at high temperature (180 °C) has been developed. Muconic acid can be obtained from sugars or catechol fermentation. Chemical oxidation of catechol is another possibility which advantageously can also be applied on substituted catechols, hereby providing substituted muconic acids. When applying the disclosed hydrothermal protocol on these substrates hitherto unknown substituted levulinic acids were accessed. In particular, 3-propyllevulinic acid has been synthesized from 4-propylcatechol, prepared from pine wood. This propylated derivative has been used for the synthesis of a 3-propyllevulinate diester, i.e. butane-1,4-diyl bis(4-oxo-3-propylpentanoate), via esterification with 1,4-butanediol. The diester showed superior performance as plasticizer in comparison to the corresponding levulinate diester in both PVC (polyvinyl chloride) and PLA (polylactic acid). It plasticizes equally effective as the notorious commercial phthalate-based benchmark DEHP (di-2-ethylhexyl phthalate) in PVC.

A Cobalt Mediated Nitrene Transfer aza-Wittig Cascade Reaction To Access 1,3,4-Oxadiazole Scaffolds.

A cobalt(II) mediated three-component synthesis of 5-substituted-N-sulfonyl-1,3,4-oxadiazol-2(3H)-imines using sulfonyl azides, N-isocyaniminotriphenylphosphorane (NIITP), and carboxylic acids has been developed. This one-pot tandem reaction starts with a nitrene transfer to NIITP, followed by addition of the carboxylic acid to the in situ formed carbodiimide and subsequent intramolecular aza-Wittig reaction. Both the steric constraints of carboxylic acid and the stoichiometry of the employed cobalt salt determine the selectivity toward the two products, i.e. 5-substituted-N-sulfonyl-1,3,4-oxadiazol-2(3H)-imine versus 5-substituted-4-tosyl-2,4-dihydro-3H-1,2,4-triazol-3-one.

Efficient Synthesis of Novel Plasticizers by Direct Palladium-Catalyzed Di- or Multi-carbonylations.

Diesters are of fundamental importance in the chemical industry and are used for many applications, e.g. as plasticizers, surfactants, emulsifiers, and lubricants. Herein, we present a straightforward and efficient method for the selective synthesis of diesters via palladium-catalyzed direct carbonylation of di- or polyols with readily available alkenes. Key-to-success is the use of a specific palladium catalyst with the "built-in-base" ligand L16 providing esterification of all alcohols and a high n/iso ratio. The synthesized diesters were evaluated as potential plasticizers in PVC films by measuring the glass transition temperature (Tg ) via differential scanning calorimetry (DSC).

Iron-Catalysed Carbene Transfer to Isocyanides as a Platform for Heterocycle Synthesis.

An iron-catalysed carbene transfer reaction of diazo compounds to isocyanides has been developed. The resulting ketenimines are trapped in situ with various bisnucleophiles to access a range of densely functionalized heterocycles (pyrimidinones, dihydropyrazolones, 1H-tetrazoles) in a one-pot process. The electron-rich Hieber anion ([Fe(CO)3 NO]- ) facilitates efficient catalytic carbene transfer from acceptor-type α-diazo carbonyl compounds to isocyanides, providing a cost-efficient and benign alternative to similar noble metal-catalysed processes. Based on DFT calculations a plausible reaction mechanism for activation of the α-diazo carbonyl carbene precursor and ketenimine formation is provided.

A practical concept for catalytic carbonylations using carbon dioxide.

The rise of CO2 in atmosphere is considered as the major reason for global warming. Therefore, CO2 utilization has attracted more and more attention. Among those, using CO2 as C1-feedstock for the chemical industry provides a solution. Here we show a two-step cascade process to perform catalytic carbonylations of olefins, alkynes, and aryl halides utilizing CO2 and H2. For the first step, a novel heterogeneous copper 10Cu@SiO2-PHM catalyst exhibits high selectivity (≥98%) and decent conversion (27%) in generating CO from reducing CO2 with H2. The generated CO is directly utilized without further purification in industrially important carbonylation reactions: hydroformylation, alkoxycarbonylation, and aminocarbonylation. Notably, various aldehydes, (unsaturated) esters and amides are obtained in high yields and chemo-/regio-selectivities at low temperature under ambient pressure. Our approach is of interest for continuous syntheses in drug discovery and organic synthesis to produce building blocks on reasonable scale utilizing CO2.

Hydrogen Borrowing: towards Aliphatic Tertiary Amines from Lignin Model Compounds Using a Supported Copper Catalyst.

Upcoming biorefineries, such as lignin-first provide renewable aromatics containing unique aliphatic alcohols. In this context, a Cu-ZrO2 catalyzed hydrogen borrowing approach was established to yield tertiary amine from the lignin model monomer 3-(3,4-dimethoxyphenyl)-1-propanol and the actual lignin-derived monomers, (3-(4-hydroxyphenyl)-1-propanol and dihydroconiferyl alcohol), with dimethylamine. Various industrial metal catalysts were evaluated, resulting in nearly quantitative mass balances for most catalysts. Identified intermediates, side and reaction products were placed into a corresponding reaction network, supported by kinetic evolution experiments. Cu-ZrO2 was selected as most suitable catalyst combining high alcohol conversion with respectable aliphatic tertiary amine selectivity. Low pressure H2 was key for high catalyst activity and tertiary amine selectivity, mainly by hindering undesired reactant dimethylamine disproportionation and alcohol amidation. Besides dimethylamine model, diverse secondary amine reactants were tested with moderate to high tertiary amine yields. As most active catalytic site, highly dispersed Cu species in strong contact with ZrO2 is suggested. ToF-SIMS, N2 O chemisorption, TGA and XPS of spent Cu-ZrO2 revealed that imperfect amine product desorption and declining surface Cu lowered the catalytic activity upon catalyst reuse, while thermal reduction readily restored the initial activity and selectivity demonstrating catalyst reuse.

Selective Nickel-Catalyzed Hydrodeacetoxylation of Aryl Acetates.

Acetate serves as a renewable and easily installed leaving group for selective deoxygenation of phenolics (ArOH). Ni-catalyzed hydrodeacetoxylation of aryl acetates (Ar-OAc) with HBpin in a green carbonate solvent selectively delivers the corresponding deoxygenated arenes (ArH). The method is also applicable to highly challenging guaiacyl and syringyl acetates, leaving -OMe groups intact without arene reduction. Renewable 4-propylguaiacol obtained from pine can also be transformed without significant loss in yield versus oil derived feedstock. The observed chemoselectivity for Ar-OAc versus ArO-Ac bond cleavage was rationalized based on mechanistic experiments and DFT calculations. ArOH side-product formation is attributed to direct competitive Ni-catalyzed reduction of the C=O bond. Hydrodeacyloxylation of a set of aryl alkanoates featured interesting chemoselectivity with a dramatic influence of the length and structure of the alkyl chain on catalysis.

Lignin-First Monomers to Catechol: Rational Cleavage of C-O and C-C Bonds over Zeolites.

A catalytic route is developed to synthesize bio-renewable catechol from softwood-derived lignin-first monomers. This process concept consists of two steps: 1) O-demethylation of 4-n-propylguaiacol (4-PG) over acidic beta zeolites in hot pressurized liquid water delivering 4-n-propylcatechol (4-PC); 2) gas-phase C-dealkylation of 4-PC providing catechol and propylene over acidic ZSM-5 zeolites in the presence of water. With large pore sized beta-19 zeolite as catalyst, 4-PC is formed with more than 93 % selectivity at nearly full conversion of 4-PG. The acid-catalyzed C-dealkylation over ZSM-5 zeolite with medium pore size gives a catechol yield of 75 %. Overall, around 70 % catechol yield is obtained from pure 4-PG, or 56 % when starting from crude 4-PG monomers obtained from softwood by lignin-first RCF biorefinery. The selective cleavage of functional groups from biobased platform molecules through a green and sustainable process highlights the potential to shift feedstock from fossil oil to biomass, providing drop ins for the chemicals industry.

Transient Directing Groups in Metal-Organic Cooperative Catalysis.

The direct functionalization of C-H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C-H bond, this selective C-H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C-H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C-H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing. During the past decade, a different approach involving both the in situ installation and removal of the directing group, which can then often be used in a catalytic manner, has emerged: the transient directing group strategy. In addition to its innovative character, this strategy has brought C-H bond functionalization to an unprecedented level of usefulness and has enabled the development of remarkably efficient processes for the direct and selective introduction of functional groups onto both aromatic and aliphatic substrates. The processes unlocked by the development of these transient directing groups will be comprehensively overviewed in this review article.

3-Substituted 2-isocyanopyridines as versatile convertible isocyanides for peptidomimetic design.

We report the use of 3-substituted 2-isocyanopyridines as convertible isocyanides in Ugi four-component reactions. The N-(3-substituted pyridin-2-yl)amide Ugi products can be cleaved by amines, alcohols, and water with Zn(OAc)2 as a catalyst. In addition, the applicability of the method was demonstrated in constrained di-/tripeptides bearing acid and base sensitive protective groups obtained via Ugi-4CR post-condensation modifications.

Expedient Synthesis of Bridged Bicyclic Nitrogen Scaffolds via Orthogonal Tandem Catalysis.

Bridged nitrogen bicyclic skeletons have been accessed via unprecedented site- and diastereoselective orthogonal tandem catalysis from readily accessible reactants in a step economic manner. Directed Pd-catalyzed γ-C(sp3 )-H olefination of aminocyclohexane with gem-dibromoalkenes, followed by a consecutive intramolecular Cu-catalyzed amidation of the 1-bromo-1-alkenylated product delivers the interesting normorphan skeleton. The tandem protocol can be applied on substituted aminocyclohexanes and aminoheterocycles, easily providing access to the corresponding substituted, aza- and oxa-analogues. The Cu catalyst of the Ullmann-Goldberg reaction additionally avoids off-cycle Pd catalyst scavenging by alkenylated reaction product. The picolinamide directing group stabilizes the enamine of the 7-alkylidenenormorphan, allowing further product post functionalizations. Without Cu catalyst, regio- and diastereoselective Pd-catalyzed γ-C(sp3 )-H olefination is achieved.

HFIP-mediated 2-aza-Cope rearrangement: metal-free synthesis of α-substituted homoallylamines at ambient temperature.

An efficient metal-free strategy for the synthesis of α-substituted homoallylamine derivatives has been developed via a 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-promoted 2-aza-Cope rearrangement of aldimines, generated in situ by condensation of aldehydes with easily accessible 1,1-diphenylhomoallylamines. This reaction provides rapid access to α-substituted homoallylamines with excellent functional group tolerance and yields. The reaction takes place at room temperature and no chromatographic purification is required for product isolation. The synthetic utility of the current method is further demonstrated by the transformation of the obtained benzophenone ketimines into N-unprotected homoallylamines, an α-amino alcohol and an α-amino amide.

Homogeneous and heterogeneous catalysts for hydrogenation of CO2 to methanol under mild conditions.

In the context of a carbon neutral economy, catalytic CO2 hydrogenation to methanol is one crucial technology for CO2 mitigation providing solutions for manufacturing future fuels, chemicals, and materials. However, most of the presently known catalyst systems are used at temperatures over 220 °C, which limits the theoretical yield of methanol production due to the exothermic nature of this transformation. In this review, we summarize state-of-the-art catalysts, focusing on the rationales behind, for CO2 hydrogenation to methanol at temperatures lower than 170 °C. Both hydrogenation with homogeneous and heterogeneous catalysts is covered. Typically, additives (alcohols, amines or aminoalcohols) are used to transform CO2 into intermediates, which can further be reduced into methanol. In the first part, molecular catalysts are discussed, organized into: (1) monofunctional, (2) M/NH bifunctional, and (3) aromatization-dearomatization bifunctional molecular catalysts. In the second part, heterogeneous catalysts are elaborated, organized into: (1) metal/metal or metal/support, (2) active-site/N or active-site/OH bifunctional heterogeneous catalysts, and (3) cooperation of catalysts and additives in a tandem process via crucial intermediates. Although many insights have been gained in this transformation, in particular for molecular catalysts, the mechanisms in the presence of heterogeneous catalysts remain descriptive and insights unclear.

Strecker-Derived Methodology for Library Synthesis of N-Acylated α-Aminonitriles.

The Strecker reaction is a three-component condensation of an aldehyde, an amine, and hydrogen cyanide, delivering an α-amino carbonitrile. Despite extensive investigations, the possibility to use amides instead of amines as one of the three condensation partners has been largely neglected. Nonetheless, the N-acylated α-aminocarbonitriles that are obtained in this way are of direct interest for drug discovery, because they make up a well-known class of mechanism-based inhibitors of serine- and cysteine-type hydrolases. In response, we have thoroughly explored the corresponding variant of the Strecker reaction, focusing on catalyst use, solvent, reaction time, and cyanide source. Optimized parameters were combined in a sequential one-pot protocol for which the scope was found to be compatible with library synthesis applications. Product yields ranged from 7 to 90%, and conditions were found to be mild and tolerant to a wide range of functional groups, including moieties that are typically present in druglike molecules.

C(sp2)-H functionalization in non-aromatic azomethine-based heterocycles.

Direct C(sp2)-H functionalization of the endocyclic azomethine and aldonitrone moieties in non-aromatic azaheterocycles has established itself as a promising methodology over the last decade. Transition metal-catalyzed cross-coupling reactions, α-metalation-electrophile quenching protocols, and (metal-free) nucleophilic substitution of hydrogen reactions (SNH) are the major routes applied on cyclic imines and their derivatives. In this overview, we show the tangible progress made in this area during the period from 2008 to 2020.

Recent Advances in Palladium-Catalyzed Isocyanide Insertions.

Isocyanides have long been known as versatile chemical reagents in organic synthesis. Their ambivalent nature also allows them to function as a CO-substitute in palladium-catalyzed cross couplings. Over the past decades, isocyanides have emerged as practical and versatile C1 building blocks, whose inherent N-substitution allows for the rapid incorporation of nitrogeneous fragments in a wide variety of products. Recent developments in palladium catalyzed isocyanide insertion reactions have significantly expanded the scope and applicability of these imidoylative cross-couplings. This review highlights the advances made in this field over the past eight years.