Phenothiazine-Based Donor-Acceptor Polymers as Multifunctional Materials for Charge Storage and Solar Energy Conversion.

The increasing energy demand for diverse applications requires new types of devices and materials. Multifunctional materials that can fulfill different roles are of high interest as they can allow fabricating devices that can both convert and store energy. Herein, organic donor-acceptor redox polymers that can function as charge storage materials in batteries and as donor materials in bulk heterojunction (BHJ) photovoltaic devices are investigated. Based on its reversible redox chemistry, phenothiazine is used as the main building block in the conjugated copolymer design and combined with diketopyrrolopyrrol and benzothiadiazole as electron-poor comonomers to shift the optical absorption into the visible region. The resulting polymers show excellent cycling stability as positive electrode materials in lithium-organic batteries at discharge potentials of 3.6-3.7 V versus Li/Li+ as well as good performances in BHJ solar cells with up to 1.9% power conversion efficiency. This study shows that the design of such multifunctional materials is possible, however, that it also faces challenges, as essential properties for good device function can lead to diametrically opposite requirements in materials design.

Conformer Ring Flip Enhances Mechanochromic Performance of ansa-Donor-Acceptor-Donor Mechanochromic Torsional Springs.

Mechanochromophores based on conformational changes of donor-acceptor-donor (DAD) springs allow sensing of forces acting on polymer chains by monotonic changes of absorbance or photoluminescence (PL) wavelength. Here, we identify a series of thiophene (D)-flanked quinoxalines (A) as molecular torsional springs for force sensing in bulk polymers at room temperature. The mode of DAD linkage to the polymer matrix and linker rigidity are key parameters that influence the efficacy of force transduction to the DAD spring and thus mechanochromic response, as probed by in situ PL spectroscopy of bulk films during stress-strain experiments. The largest shift of the PL maximum, and thus the highest sensitivity, is obtained from an ansa-DAD spring exhibiting bridged D units and a stiff A linker. Using detailed spectroscopy and density functional theory calculations, we reveal conformer redistribution in the form of a thiophene ring flip as the major part of the overall mechanochromic response. At forces as low as 27 pN at early stages of deformation, the ring flip precedes mechanically induced planarization of the ansa-DAD spring, the latter process producing a PL shift of 21 nm nN-1. Within the stress-strain diagram, the thiophene ring flip and DAD planarization are thus two separated processes that also cause irreversible and reversible mechanochromic responses, respectively, upon sample failure. As the thiophene ring flip requires much smaller forces than planarization of the DAD spring, such micromechanical motion gives access to sensing of tiny forces and expands both sensitivity and the force range of conformational mechanochromophores.

Force Dependent Barriers from Analytic Potentials within Elastic Environments.

Bond rupture under the action of external forces is usually induced by temperature fluctuations, where the key quantity is the force dependent barrier that needs to be overcome. Using analytic potentials we find that these barriers are fully determined by the dissociation energy and the maximal force the potential can withstand. The barrier shows a simple dependence on these two quantities that allows for a re-interpretation of the Eyring-Zhurkov-Bell length Δ x ‡ and the expressions in theories going beyond that. It is shown that solely elastic environments do not change this barrier in contrast to the predictions of constraint geometry simulate external force (COGEF) strategies. The findings are confirmed by explicit calculations of bond rupture in a polydimethylsiloxane model.

A mechanochromic donor-acceptor torsional spring.

Mechanochromic polymers are intriguing materials that allow to sense force of specimens under load. Most mechanochromic systems rely on covalent bond scission and hence are two-state systems with optically distinct "on" and "off" states where correlating force with wavelength is usually not possible. Translating force of different magnitude with gradually different wavelength of absorption or emission would open up new possibilities to map and understand force distributions in polymeric materials. Here, we present a mechanochromic donor-acceptor (DA) torsional spring that undergoes force-induced planarization during uniaxial elongation leading to red-shifted absorption and emission spectra. The DA spring is based on ortho-substituted diketopyrrolopyrrole (o-DPP). Covalent incorporation of o-DPP into a rigid yet ductile polyphenylene matrix allows to transduce sufficiently large stress to the DA spring. The mechanically induced deflection from equilibrium geometry of the DA spring is theoretically predicted, in agreement with experiments, and is fully reversible upon stress release.