Enhanced Photon-Phonon Interaction in WSe2 Acoustic Nanocavities.

Acoustic nanocavities (ANCs) with resonance frequencies much above 1 GHz are prospective to be exploited in sensors and quantum operating devices. Nowadays, acoustic nanocavities fabricated from van der Waals (vdW) nanolayers allow them to exhibit resonance frequencies of the breathing acoustic mode up to f ∼ 1 THz and quality factors up to Q ∼ 103. For such high acoustic frequencies, electrical methods fail, and optical techniques are used for the generation and detection of coherent phonons. Here, we study experimentally acoustic nanocavities fabricated from WSe2 layers with thicknesses from 8 up to 130 nm deposited onto silica colloidal crystals. The substrate provides a strong mechanical support for the layers while keeping their acoustic properties the same as in membranes. We concentrate on experimental and theoretical studies of the amplitude of the optically measured acoustic signal from the breathing mode, which is the most important characteristic for acousto-optical devices. We probe the acoustic signal optically with a single wavelength in the vicinity of the exciton resonance and measure the relative changes in the reflectivity induced by coherent phonons up to 3 × 10-4 for f ∼ 100 GHz. We reveal the enhancement of photon-phonon interaction for a wide range of acoustic frequencies and show high sensitivity of the signal amplitude to the photoelastic constants governed by the deformation potential and dielectric function for photon energies near the exciton resonance. We also reveal a resonance in the photoelastic response (we call it photoelastic resonance) in the nanolayers with thickness close to the Bragg condition. The estimates show the capability of acoustic nanocavities with an exciton resonance for operations with high-frequency single phonons at an elevated temperature.

Nature-inspired functional porous materials for low-concentration biomarker detection.

Nanostructuration is a promising tool for enhancing the performance of sensors based on electrochemical transduction. Nanostructured materials allow for increasing the surface area of the electrode and improving the limit of detection (LOD). In this regard, inverse opals possess ideal features to be used as substrates for developing sensors, thanks to their homogeneous, interconnected pore structure and the possibility to functionalize their surface. However, overcoming the insulating nature of conventional silica inverse opals fabricated via sol-gel processes is a key challenge for their application as electrode materials. In this work, colloidal assembly, atomic layer deposition and selective surface functionalization are combined to design conductive inverse opals as an electrode material for novel glucose sensing platforms. An insulating inverse opal scaffold is coated with uniform layers of conducting aluminum zinc oxide and platinum, and subsequently functionalized with glucose oxidase embedded in a polypyrrole layer. The final device can sense glucose at concentrations in the nanomolar range and is not affected by the presence of common interferents gluconolactone and pyruvate. This method may also be applied to different conductive materials and enzymes to generate a new class of highly efficient biosensors.

Origin of the Acoustic Bandgaps in Hypersonic Colloidal Phononics: The Role of the Elastic Impedance.

How phonons propagate in nanostructures determines the flow of elastic and thermal energy in dielectric materials. However, a reliable theoretical prediction of the phonon dispersion relation requires experimental verification both near to and far from the Brillouin zone of the nanostructure. We report on the experimental hypersonic phonon dispersion of hard (SiO2) and soft (polymer) fcc colloidal crystals infiltrated in liquid polydimethylsiloxane with different elastic impedance contrast using Brillouin light spectroscopy. We discuss the distinct differences with first-principles full elastodynamic calculations involving a multiple-scattering theory. Interparticle contacts strongly impact the long-wavelength speed of sound and the nature of the particle vibration resonance-induced hybridization hypersonic bandgap. The absence of the order-induced Bragg bandgap in SiO2 and its presence in soft opals cannot be fully accounted for by the theory, limiting its predictive power. Bridging the elasticity of the two colloidal crystals with suitable SiO2 core-shell (polymer) particles reveals an unprecedented crossover behavior in the dispersion relation. In view of many conversational parameters, the control tuning of phonon propagation in soft matter-based hypersonic phononics remains challenging.

A Plant Bioreactor for the Synthesis of Carbon Nanotube Bionic Nanocomposites.

Bionic composites are an emerging class of materials produced exploiting living organisms as reactors to include synthetic functional materials in their native and highly performing structures. In this work, single wall carboxylated carbon nanotubes (SWCNT-COOH) were incorporated within the roots of living plants of Arabidopsis thaliana. This biogenic synthetic route produced a bionic composite material made of root components and SWCNT-COOH. The synthesis was possible exploiting the transport processes existing in the plant roots. Scanning electrochemical microscopy (SECM) measurements showed that SWCNT-COOH entered the vascular bundles of A. thaliana roots localizing within xylem vessels. SWCNT-COOH preserved their electrical properties when embedded inside the root matrix, both at a microscopic level and a macroscopic level, and did not significantly affect the mechanical properties of A. thaliana roots.

Beyond biotemplating: multiscale porous inorganic materials with high catalytic efficiency.

Biotemplating makes it possible to prepare materials with complex structures by taking advantage of nature's ability to generate unique morphologies. In this work, we designed and produced a multi-scale porosity (MSP) scaffold starting from sea urchin spines by adding an additional nano-porosity to its native micro-porosity. The final replica shows porosity in both length scales and is an effective high-performing photocatalytic material.

Doxorubicin-Loaded Squid Pen Plaster: A Natural Drug Delivery System for Cancer Cells.

The native structure of the ß-chitin in the gladius (squid pen) of Loligo vulgaris squid can be used as a natural plaster to entrap and release a model drug, doxorubicin, in a targeted and controlled way. Local pH determines the protonation state of the doxorubicin molecules, controlling the two phenomena. Confocal microscopy shows that doxorubicin is uniformly embedded in the ß-chitin squid pen and is not simply adsorbed on its surface. Coculture with HeLa cells reveals that the ß-chitin squid pen plaster is perfectly biocompatible, while when it is loaded with doxorubicin it shows high cytotoxicity toward the cancer cells. The drug, once released, rapidly accumulates inside the cells. In conclusion, the native structure of a ß-chitin squid pen can be potentially applied as a "green" pH-responsive drug vehicle for controlled release.

Non-stoichiometric hydrated magnesium-doped calcium carbonate precipitation in ethanol.

The effect of Mg2+ on the precipitation pathway of CaCO3 in absolute ethanol has been studied to investigate the role of ion solvation in the crystallization process. Our data reveal that high concentrations of Mg2+ promote the precipitation of an amorphous transient phase together with non-stoichometric hydrated phases of calcium carbonate.

Retinoic acid/calcite micro-carriers inserted in fibrin scaffolds modulate neuronal cell differentiation.

The controlled release of cell differentiating agents is crucial in many aspects of regenerative medicine. Here we propose the use of hybrid calcite single crystals as micro-carriers for the controlled and localized release of retinoic acid, which is entrapped within the crystalline lattice. The release of retinoic acid occurs only in the proximity of stem cells, upon dissolution of the calcite hybrid crystals that are dispersed in the fibrin scaffold. These hybrid crystals provide a sustained dosage of the entrapped agent. The environment provided by this composite scaffold enables differentiation towards neuronal cells that form a three-dimensional neuronal network.

Synthesis of calcium carbonate in trace water environments.

Calcium carbonate (CaCO3) was synthesized from diverse water-free alcohol solutions, resulting in the formation of vaterite and calcite precipitates, or stable particle suspensions, with the dimensions and morphologies depending upon the conditions used. The obtained results shed light on the importance of solvation during crystallization of CaCO3 and open a novel synthetic route for its precipitation in organic solvents.

Calcite Single Crystals as Hosts for Atomic-Scale Entrapment and Slow Release of Drugs.

Doxorubicin (DOX)/CaCO3 single crystals act as pH responsive drug carrier. A biomimetic approach demonstrates that calcite single crystals are able, during their growth in the presence of doxorubicin, to entrap drug molecules inside their lattice along specific crystallographic directions. Alterations in lattice dimensions and microstructural parameters are determined by means of high-resolution synchrotron powder diffraction measurements. Confocal microscopy confirms that doxorubicin is uniformly embedded in the crystal and is not simply adsorbed on the crystal surface. A slow release of DOX was obtained preferentially in the proximity of the crystals, targeting cancer cells.