Genome-centric metagenomics and methanogenic pathway analysis for acclimated anaerobic digestion of chicken manure with high ammonia stressed under thermophilic condition.

Thermophilic anaerobic digestion (AD) of animal manure offers various environmental benefits but the process requires a microbial community acclimatized to high ammonia. In current study, a lab-scale continuous stirred tank reactor (CSTR) fed with chicken manure was operated under thermophilic condition for 450 days in total. Results showed that the volumetric methane production decreased from 445 to 328 and sharply declined to 153 mL L-1·d-1 with feeding total solid (TS) step increased from 5% to 7.5% and 10%, respectively. While, after a long-term stop feeding for 80 days, highly disturbed reactor was able to recover methane generation to 739 mL L-1·d-1 at feeding TS of 10%. Isotope analysis indicted acetate converted to methane through the syntrophic acetate oxidation and hydrogenotrophic methanogenesis (SAO-HM) pathway increased from 33% to 63% as the concentration of ammonium increased from 2493 to 6258 mg L-1. Significant different in the genome expression of the SAO bacterial from 0.09% to 1.23%, combining with main hydrogenotrophic partners (Methanoculleus spp. and Methanothermobacter spp.) contented of 2.1% and 99.9% during inhibitory and recovery stages, respectively. The highly expressed KEGG pathway in level 3 (enzyme genes) for the Recovery sludge combining with the extraordinary high abundance of genera Halocella sp. suggested that Halocella sp. might be a highly efficient hydrolytic and acidogenic microorganism and enhance the process of SAO during carbon metabolic flow to methane. This report will be a basis for further study of AD studies on high nitrogen content of poultry manure.

Evaluation of in vitro digestibility of Aspergillus oryzae fungal biomass grown on organic residue derived-VFAs as a promising ruminant feed supplement.

BACKGROUND: As demand for high quality animal feed continues to raise, it becomes increasingly important to minimize the environmental impact of feed production. An appealing sustainable approach to provide feed fractions is to use organic residues from agro-food industry. In this regard, volatile fatty acids (VFAs) such as acetic, propionic and butyric acids, derived from bioconversion of organic residues can be used as precursors for production of microbial protein with ruminant feed inclusion potential. This study aims to investigate the in vitro digestibility of the Aspergillus oryzae edible fungal biomass cultivated on VFAs-derived from anaerobic digestion of residues. The produced fungal protein biomass, along with hay clover silage and rapeseed meal were subjected to various in vitro assays using two-stage Tilley and Terry (TT), gas, and bag methods to evaluate and compare its digestibility for application in ruminant feed. RESULTS: The produced fungal biomass contained a higher crude protein (CP) (41%-49%) and rather similar neutral detergent fiber (NDF) (41%-56%) compared to rapeseed meal. The rumen in vitro dry matter digestibility (IVDMD) of the fungal biomass in the TT method ranged from 82% to 88% (statistically similar to that of the gas method (72% to 85%)). The IVDMD of fungal biomass were up to 26% and 40% greater than that of hay clover silage and rapeseed meal, respectively. The type of substrate and bag method had pronounced effect on the fermentation products (ammonium-N (NH4+-N), total gas and VFAs). Fungal biomass digestion resulted in the highest release of NH4+-N (340-540 mg/L) and the ratio of acetate to propionate ratio (3.5) among subjected substrates. CONCLUSION: The results indicate that gas method can be used as a reliable predictor for IVDMD as well as fermentation products. Furthermore, the high IVDMD and fermentation product observed for Aspergillus oryzae fungal biomass digestion, suggest that the supplementation of fungal biomass will contribute to improving the rumen digestion by providing necessary nitrogen and energy to the ruminant and microbiota.

Biovalorization of brewer's spent grain as single-cell protein through coupling organosolv pretreatment and fungal cultivation.

Brewer's spent grain (BSG) is a clean byproduct from the food sector, comprising 85% of the brewing process solid byproducts. BSG is mainly used as low-quality animal feed and often ends up in landfills due to its short shelf life. However, considering its abundant availability and high nutritional content, BSG holds the potential for biorefineries to produce valuable products. The recalcitrant nature of BSG poses a challenge, requiring pretreatment steps. Therefore, this study focused on valorizing BSG obtained from organosolv pretreatment by producing food- and feed-grade single-cell protein (SCP). The BSG was subject to organosolv pretreatment at 180C for 2 h with 50% v/v ethanol as solvent. Filamentous fungi N. intermedia and A. oryzae were cultivated on as-received and different fractions of organosolv-treated BSG to evaluate the effect of factors such as pretreatment, fungal strain, pretreated fraction content, and substrate loading on fungal biomass yield, biomass composition (protein content), and metabolite production. A. oryzae cultivation on all tested substrates yielded 7%-40% more biomass than N. intermedia. Cultivating A. oryzae on organosolv liquor resulted in the highest biomass protein content (44.8% ± 0.7%) with a fungal biomass concentration of 5.1 g/L. A three-fold increase in the substrate loading increased the ethanol-to-substrate yield by 50%, while protein content was decreased by 23%. Finally, a biorefinery concept was proposed to integrate the organosolv pretreatment of BSG with fungal cultivation for maximum yield of SCP while obtaining other products such as lignin and ethanol, providing a sustainable rout for managing BSG.

Membrane bioreactor assisted volatile fatty acids production from agro-industrial residues for ruminant feed application.

Volatile fatty acids (VFAs) supplementation in ruminants' diet as a source of energy and chemical precursors and their effect on animal's physiology and well-being has long been of scientific interest. Production of VFAs through anaerobic digestion of agro-industrial residues not only creates value but also presents an alternative sustainable approach for ruminant feed supplementation. Therefore, this study aimed to investigate the bioconversion of agro-industrial residues produced in large quantities such as apple pomace (AP), thin stillage (Ts), and potato protein liquor (PPL) to VFAs, fully complying to regulations set for ruminant feed supplement production. In this regard, batch acidogenic fermentation assays (pH 6-10) and semi-continuous immersed membrane bioreactor (iMBR) were applied. In batch assays, at pH 10 the co-digestion of Ts and PPL produced the highest VFAs concentration (14.2 g/L), indicating a yield of 0.85 g CODVFAs/g volatile solids (VS)added. The optimum batch condition was then applied in the iMBR for in situ fermentation and recovery of VFAs at different organic loading rates (OLR). With increasing the OLR to 3.7 gVS/L.day, the highest VFAs concentration of 28.6 g/L (1,2 g CODVFAs /gVSadded) was achieved. Successful long-term (114 days) membrane filtration was conducted in a media with a maximum of 40 g/L of total solids (TS), facing irreversible membrane fouling in the final stages. Acidogenic fermentation using an iMBR has the potential to play an important role in the future of feed additive provision through the biorefining of agro-industrial wastes via the carboxylate platform, given the role of VFAs production from organic residues.

Application of Immersed Membrane Bioreactor for Semi-Continuous Production of Polyhydroxyalkanoates from Organic Waste-Based Volatile Fatty Acids.

Volatile fatty acids (VFAs) appear to be an economical carbon feedstock for the cost-effective production of polyhydroxyalkanoates (PHAs). The use of VFAs, however, could impose a drawback of substrate inhibition at high concentrations, resulting in low microbial PHA productivity in batch cultivations. In this regard, retaining high cell density using immersed membrane bioreactor (iMBR) in a (semi-) continuous process could enhance production yields. In this study, an iMBR with a flat-sheet membrane was applied for semi-continuous cultivation and recovery of Cupriavidus necator in a bench-scale bioreactor using VFAs as the sole carbon source. The cultivation was prolonged up to 128 h under an interval feed of 5 g/L VFAs at a dilution rate of 0.15 (d-1), yielding a maximum biomass and PHA production of 6.6 and 2.8 g/L, respectively. Potato liquor and apple pomace-based VFAs with a total concentration of 8.8 g/L were also successfully used in the iMBR, rendering the highest PHA content of 1.3 g/L after 128 h of cultivation. The PHAs obtained from both synthetic and real VFA effluents were affirmed to be poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with a crystallinity degree of 23.8 and 9.6%, respectively. The application of iMBR could open an opportunity for semi-continuous production of PHA, increasing the feasibility of upscaling PHA production using waste-based VFAs.

Cauliflower mosaic virus protein P6 is a multivalent node for RNA granule proteins and interferes with stress granule responses during plant infection.

Biomolecular condensation is a multipurpose cellular process that viruses use ubiquitously during their multiplication. Cauliflower mosaic virus replication complexes are condensates that differ from those of most viruses, as they are nonmembranous assemblies that consist of RNA and protein, mainly the viral protein P6. Although these viral factories (VFs) were described half a century ago, with many observations that followed since, functional details of the condensation process and the properties and relevance of VFs have remained enigmatic. Here, we studied these issues in Arabidopsis thaliana and Nicotiana benthamiana. We observed a large dynamic mobility range of host proteins within VFs, while the viral matrix protein P6 is immobile, as it represents the central node of these condensates. We identified the stress granule (SG) nucleating factors G3BP7 and UBP1 family members as components of VFs. Similarly, as SG components localize to VFs during infection, ectopic P6 localizes to SGs and reduces their assembly after stress. Intriguingly, it appears that soluble rather than condensed P6 suppresses SG formation and mediates other essential P6 functions, suggesting that the increased condensation over the infection time-course may accompany a progressive shift in selected P6 functions. Together, this study highlights VFs as dynamic condensates and P6 as a complex modulator of SG responses.

Volatile Fatty Acids (VFA) Production and Recovery from Chicken Manure Using a High-Solid Anaerobic Membrane Bioreactor (AnMBR).

Acidogenic fermentation of chicken manure (CM) for production and recovery of volatile fatty acids (VFA) is an interesting biological waste-to-value approach compared to benchmark organic waste management strategies. Considering the wide range of high value applications of VFA, a semi-continuous immersed anaerobic membrane bioreactor (AnMBR) was applied to boost VFA productivity and yield, while reducing downstream processing stages assisting the recovery of VFA. In this regard, the effect of parameters such as pH and organic loading rates (OLR) on the overall bioconversion and filtration performance was investigated. Thermal-shocked CM was applied both as inoculum and substrate. A very high VFA yield (0.90 g-VFA/g-VS) was obtained in the treatment with no pH control (~8.2) at an OLR of 2 g-VS/(L·d), presenting 24% higher yield compared to that of the controlled pH. Batch assays further demonstrated the enhanced hydrolysis and acidogenesis activities at weak alkaline conditions. A long-term (78 days) fermentation and filtration was successfully performed, where stable membrane filtration performance was experienced for about 50 days under high-solid (suspended solid of 37-45 g/L) and high flux (20 L/(m2·h)) conditions. Results suggest that AnMBR of CM is a feasible and promising process for VFA production and recovery.

Waste-derived volatile fatty acid production and ammonium removal from it by ion exchange process with natural zeolite.

Volatile fatty acids (VFAs) produced during anaerobic digestion (AD) of organic waste are a promising alternative carbon source for various biological processes; however, their applications are limited due to the presence of impurities such as ammonium (NH4+). This study investigates the potential for removal of ammonium using a naturally occurring zeolite (clinoptilolite) from chicken manure (CKM) derived VFA effluent recovered from an anaerobic membrane bioreactor (MBR). Experiments were conducted for both synthetic and actual VFA (AD-VFA) solutions, and the effects of different parameters were investigated with batch and continuous studies. It was observed that the Langmuir-type isotherm provided the best fit to the equilibrium data in the isotherm investigations carried out with the AD-VFA solution. The maximum adsorption capacity (qm) was found as 15.7 mg NH4+/g clinoptilolite. The effect of some operational parameters on process performance such as pH, initial NH4+ loading and potassium ion (K+) concentration was investigated. The pH had a negligible effect on ammonium removal for a pH range of 3-7, while the removal efficiency of ammonium decreased with the increase of initial NH4+ loading and K+ concentration. At the optimum conditions determined in batch experiments, the ammonium removal from synthetic and AD-VFA solutions were compared and average ammonium removal efficiencies of 93 and 94% were found in 12 h equilibrium time for synthetic and AD-VFA solutions, respectively. Overall findings indicated that clinoptilolite has excellent potential for ion exchange when combined with biological processes such as acidogenic fermentation of VFAs to purify the solution from high-ammonium content.

Potential of food waste-derived volatile fatty acids as alternative carbon source for denitrifying moving bed biofilm reactors.

Fossil-based materials such as methanol are frequently used in the denitrification process of advanced biological wastewater treatment as external carbon source. Volatile fatty acids (VFAs) produced by anaerobic digestion of food waste, are sustainable compounds with the potential to act as carbon sources for denitrification, reducing carbon footprint and material costs. In this study, the effectiveness of food waste-derived VFAs (AD-VFA) was investigated in the post-denitrification process in comparison with synthetic VFA and methanol as carbon sources. Acetic acid had the highest rate of disappearance among single tested VFAs with a denitrification rate of 0.44 g NOx-N removed/m2/day, indicating a preferential utilization pattern. While AD-VFA had a denitrification rate of 0.61 mg NOx-N removed/m2/day, sVFA had a rate of 0.57 mg NOx-N removed/m2/day, indicating that impurities in AD-VFA did not play substantial role in denitrification. AD-VFA proved to be promising carbon source alternative for denitrification in wastewater treatment plants.

Application of Fungal Biomass for the Development of New Polylactic Acid-Based Biocomposites.

Fungal biomass (FB), a by-product of the fermentation processes produced in large volumes, is a promising biomaterial that can be incorporated into poly(lactic acid) (PLA) to develop enhanced biocomposites that fully comply with the biobased circular economy concept. The PLA/FB composites, with the addition of triethyl citrate (TEC) as a biobased plasticizer, were fabricated by a microcompounder at 150 °C followed by injection molding. The effects of FB (10 and 20 wt %) and TEC (5, 10, and 15 wt %) contents on the mechanical, thermal and surface properties of the biocomposites were analyzed by several techniques. The PLA/FB/TEC composites showed a rough surface in their fracture section. A progressive decrease in tensile strength and Young's modulus was observed with increasing FB and TEC, while elongation at break and impact strength started to increase. The neat PLA and biocomposite containing 10% FB and 15% TEC exhibited the lowest (3.84%) and highest (224%) elongation at break, respectively. For all blends containing FB, the glass transition, crystallization and melting temperatures were shifted toward lower values compared to the neat PLA. The incorporation of FB to PLA thus offers the possibility to overcome one of the main drawbacks of PLA, which is brittleness.

Arabidopsis RNA processing body components LSM1 and DCP5 aid in the evasion of translational repression during Cauliflower mosaic virus infection.

Viral infections impose extraordinary RNA stress, triggering cellular RNA surveillance pathways such as RNA decapping, nonsense-mediated decay, and RNA silencing. Viruses need to maneuver among these pathways to establish infection and succeed in producing high amounts of viral proteins. Processing bodies (PBs) are integral to RNA triage in eukaryotic cells, with several distinct RNA quality control pathways converging for selective RNA regulation. In this study, we investigated the role of Arabidopsis thaliana PBs during Cauliflower mosaic virus (CaMV) infection. We found that several PB components are co-opted into viral factories that support virus multiplication. This pro-viral role was not associated with RNA decay pathways but instead, we established that PB components are helpers in viral RNA translation. While CaMV is normally resilient to RNA silencing, dysfunctions in PB components expose the virus to this pathway, which is similar to previous observations for transgenes. Transgenes, however, undergo RNA quality control-dependent RNA degradation and transcriptional silencing, whereas CaMV RNA remains stable but becomes translationally repressed through decreased ribosome association, revealing a unique dependence among PBs, RNA silencing, and translational repression. Together, our study shows that PB components are co-opted by the virus to maintain efficient translation, a mechanism not associated with canonical PB functions.

Double-stage membrane-assisted anaerobic digestion process intensification for production and recovery of volatile fatty acids from food waste.

The potential of organic waste streams (i.e., food waste) for the sustainable production of precursor chemicals such as volatile fatty acids (VFAs) using anaerobic digestion (AD) has received significant attention in the present days. AD-derived VFAs have great market appeal if the challenges with their recovery and purification from the complex AD effluent is overcome. In this study, a microfiltration immersed membrane bioreactor (MBR) was used for the production of VFAs from food waste and simultaneously in-situ recovery of VFAs. The MBR set-up was applied for 98 days, with a maximum yield of 0.2 gVFA/gVSadded at an organic loading rate (OLR) of 4 g VS/L/d. The recovered permeate was then subjected to further purification using a side stream ultrafiltration unit. It was found that the removal rates of total solids (TS), total suspended solids (TSS), dissolved solids (DS), volatile solids (VS) and volatile suspended solids (VSS) were above 70-80% in both membranes (10 kDa and 50 kDa), and Phosphorus (P), Total Kjeldahl Nitrogen (TKN), chemical oxygen demand (COD), and NH4+-N were also removed partially. Particularly, VFAs concentration (above 6 g/L) was higher for 10 kDa at pH 5.4 in ultrafiltered solution and permeate flux decline was higher for 10 kDa at pH 5.4. These results are also supported by the measurement of UV-Vis spectra of the solution and visual appearance, providing a promising approach towards building a VFAs-based platform.

Factors influencing pressure-driven membrane-assisted volatile fatty acids recovery and purification-A review.

Volatile fatty acids (VFAs) are building block chemicals that can be produced through bioconversion of organic waste streams via anaerobic digestion as intermediate products. Purified VFAs are applicable in a wide range of industrial applications such as food, textiles, cosmetics, pharmaceuticals etc. production. The present review focuses on VFAs recovery methods and technologies such as adsorption, distillation, extraction, gas stripping, esterification and membrane based techniques etc., while presenting a discussion of their pros and cons. Moreover, a great attention has been given to the recovery of VFAs through membrane filtration as a promising sustainable clarification, fractionation and concentration approach. In this regard, a thorough overview of factors affecting membrane filtration performance for VFAs recovery has been presented. Filtration techniques such as nanofiltration and reverse osmosis have shown to be capable of recovering over 90% of VFAs content from organic effluent steams, proving the direct effect of membrane materials/surface chemistry, pore size and solution pH in recovery success level. Overall, this review presents a new insight into challenges and potentials of membrane filtration for VFAs recovery based on the effects of factors such as operational parameters, membrane properties and effluent characteristics.

A Glimpse of the World of Volatile Fatty Acids Production and Application: A review.

Sustainable provision of chemicals and materials is undoubtedly a defining factor in guaranteeing economic, environmental, and social stability of future societies. Among the most sought-after chemical building blocks are volatile fatty acids (VFAs). VFAs such as acetic, propionic, and butyric acids have numerous industrial applications supporting from food and pharmaceuticals industries to wastewater treatment. The fact that VFAs can be produced synthetically from petrochemical derivatives and also through biological routes, for example, anaerobic digestion of organic mixed waste highlights their provision flexibility and sustainability. In this regard, this review presents a detailed overview of the applications associated with petrochemically and biologically generated VFAs, individually or in mixture, in industrial and laboratory scale, conventional and novel applications.

The effect of temperature and styrene concentration on biogas production and degradation characteristics during anaerobic removal of styrene from wastewater.

In the current study, styrene was removed anaerobically from wastewaters at temperatures of 35 ℃, 25 ℃, and 15 ℃ and concentration range of 20-150 ppm in the presence of ethanol as a co-substrate and co-solvent. Maximum styrene removal of 93% was achieved at 35 ℃. The volatilization of styrene was negligible at about 2% at all experimented temperatures. The average special methane yield (SMY) at 35 ℃ was 4.14- and 225-times higher than that of at T = 25 ℃ and T = 15 ℃, respectively, but no methane was produced in the absence of ethanol. The proteins content of the soluble microbial product (SMP) and extracellular polymeric substance (EPS) was much higher than the carbohydrate content. At styrene concentration > 80 ppm, SMY, SMP, and EPS dropped sharply. The results confirmed the well performance of anaerobic microorganisms in removing styrene from wastewater and biogas production at mesophilic condition.

Methanogen and nitrifying genes dynamics in immersed membrane bioreactors during anaerobic co-digestion of different organic loading rates food waste.

This work was aimed to evaluate the distinctive food waste (FW) organic loading rates (OLR) on methanogen and nitrifying genes dynamics and its correlation with identified relative abundance of bacterial dynamics during the anaerobic digestion. This experiment were carried out in the digesters at high OLR of food wastes at (4 to 8 g volatile solids/liter/day reactor R1) and (6 to 10 g volatile solids/liter/day reactor R2). The results shown that the relative abundance of mcrA, mcrB and mcrG genes were richest in the first day of both R1 and R2. In addition, the most of nitrifying genes were greater in after 34 days digestion in R2, while these genes did not show the specific regularity in R1. Finally, the correlation figure shows that Clostridium and Lactobacillus genera were significantly correlated with the different organic acids and methanogen and nitrifying genes dynamics.

Small-scale sequencing enables quality assessment of Ribo-Seq data: an example from Arabidopsis cell culture.

BACKGROUND: Translation is a tightly regulated process, controlling the rate of protein synthesis in cells. Ribosome sequencing (Ribo-Seq) is a recently developed tool for studying actively translated mRNA and can thus directly address translational regulation. Ribo-Seq libraries need to be sequenced to a great depth due to high contamination by rRNA and other contaminating nucleic acid fragments. Deep sequencing is expensive, and it generates large volumes of data, making data analysis complicated and time consuming. METHODS AND RESULTS: Here we developed a platform for Ribo-Seq library construction and data analysis to enable rapid quality assessment of Ribo-Seq libraries with the help of a small-scale sequencer. Our data show that several qualitative features of a Ribo-Seq library, such as read length distribution, P-site distribution, reading frame and triplet periodicity, can be effectively evaluated using only the data generated by a benchtop sequencer with a very limited number of reads. CONCLUSION: Our pipeline enables rapid evaluation of Ribo-Seq libraries, opening up possibilities for optimization of Ribo-Seq library construction from difficult samples, and leading to better decision making prior to more costly deep sequencing.

New Solvent and Coagulating Agent for Development of Chitosan Fibers by Wet Spinning.

Adipic acid was evaluated as a novel solvent for wet spinning of chitosan fibers. A solvent with two carboxyl groups could act as a physical crosslinker between the chitosan chains, resulting in improved properties of the fibers. The performance of adipic acid was compared with conventional solvents, i.e., lactic, citric, and acetic acids. Chitosan solutions were injected into a coagulation bath to form monofilaments. Sodium hydroxide (NaOH) and its mixture with ethanol (EtOH) were used as coagulation agents. Scanning electron microscopy confirmed the formation of uniform chitosan monofilaments with an even surface when using adipic acid as solvent. These monofilaments generally showed higher mechanical strength compared to that of monofilaments produced using conventional solvents. The highest Young's modulus, 4.45 GPa, was recorded for adipic acid monofilaments coagulated in NaOH-EtOH. This monofilament also had a high tensile strength of 147.9 MPa. Furthermore, taking advantage of chitosan insolubility in sulfuric acid (H2SO4) at room temperature, chitosan fibers were successfully formed upon coagulation in H2SO4-EtOH. The dewatering of fibers using EtOH before drying resulted in a larger fiber diameter and lower mechanical strength. Adipic acid fibers made without dehydration illustrated 18% (for NaOH), 46% (for NaOH-EtOH), and 91% (for H2SO4-EtOH) higher tensile strength compared to those made with dehydration.

Date fruit processing waste and approaches to its valorization: A review.

In the Middle East and North Africa, dates are a traditional and economically valuable crop, playing an essential role in people's daily diets. Date fruit production and related processing industry generate a large quantity of waste; for illustration, the date juicing industry produces roughly 17-28% Date press cake (DPC), which is mainly discarded in open lands and drains. Considering the generation volume and the nutrient content of DPC, this organic by-product stream can be valorized through the production of a wide range of products with a great market appeal, such as volatile fatty acids, activated carbon, organic acids, etc. To provide an insight into the feasibility of the application DPC as a green precursor for various chemical and biological processes, the chemical and nutritional composition of dates and DPC, an overview of the date processing industries, and common practices conducted for DPC valorization addressed and thoroughly discussed, in this review.

Cultivation of edible filamentous fungus Aspergillus oryzae on volatile fatty acids derived from anaerobic digestion of food waste and cow manure.

In a circular economy approach, edible filamentous fungi (single cell protein) can be cultivated on volatile fatty acids (VFAs) derived from anaerobic digestion (AD) of organic-rich waste streams. In this study, the effect of pH, concentration/distribution of VFAs, nutrient supplementation, and type of waste on Aspergillus oryzae cultivation on synthetic VFAs, and actual VFAs derived from AD of food waste and cow manure were investigated. The optimal pH for A. oryzae growth on VFAs were 6 and 7 with maximum acetic acid consumption rates of 0.09 g/L.h. The fungus could thrive on high concentrations of acetic (up to 9 g/L) yielding 0.29 g dry biomass/gVFAsfed. In mixed VFAs cultures, A. oryzae primarily consumed caproic and acetic acids reaching a biomass yield of 0.26 g dry biomass/gVFAsfed (containing up to 41% protein). For waste-derived VFAs at pH 6, the fungus successfully consumed 81-100% of caproic, acetic, and butyric acids.