Remediation of Dyes Using Supramolecular Material Derived from Carbohydrate Based π-Gelator Using the Bottom-Up Assembly Approach.

As a consequence of rapid population growth, the earth has faced numerous environmental sustainability issues and crises, water pollution is one of the important points of concern because of industrialization. In particular, effluents discharged from dying industries are rated top among the various industrial effluents, especially by their volume and composition. Annually >7.5 × 105 metric tons of different dyes are produced and consumed in different industries. In order to dye 1 kg of fabric, approximately 100-150 L of water is required, and after the dying process, it is discharged as an effluent either on a landfill or in water bodies. It is our responsibility to conserve environmental sustainability. In this line, we have developed a simple protocol to generate carbohydrate-based amphiphile using D-sorbitol, and pyrene-1-carboxaldehyde in good yield. This carbohydrate-based π-gelator is prone to forming a gel in various solvents and oils by the bottom-up assembly process. Morphological analysis of the self-assembled structure was identified by using optical microscopy and SEM. The viscoelastic behavior of the gel was examined by using rheology. In this paper, we explored the dye adsorption and desorption characteristics of the gel. Further, we have developed a cartridge based on cellulose using a template-assisted assembly phenomenon and demonstrated its potential in adsorbing dyes such as methylene blue, crystal violet, rhodamine B, and Congo red.

Rapid Assembly of Functionalized 2H-Chromenes and 1,2-Dihydroquinolines via Microwave-Assisted Secondary Amine-Catalyzed Cascade Annulation of 2-O/N-Propargylarylaldehydes with 2,6-Dialkylphenols.

An efficient, secondary amine-catalyzed cascade annulation of 2-O/N-propargylarylaldehydes with 2,6-dialkylphenols was established to access biologically relevant functionalized 2H-chromenes and 1,2-dihydroquinolines tethered with a synthetically useful p-quinone methide scaffold in high yields under microwave irradiation and conventional heating conditions. The microwave-assisted strategy was convenient, clean, rapid, and high yielding in which the reactions were completed in just 15 min, and the yields obtained were up to 95%. This highly atom-economical domino process constructed two new C-C double bonds and a six-membered O/N-heterocyclic ring in a single synthetic operation. Its mechanism process was rationalized as involving sequential iminium ion formation, nucleophilic addition, and intramolecular annulation steps. Furthermore, the synthesized 2H-chromene derivatives were transformed into valuable indeno[2,1-c]chromenes, 5H-indeno[2,1-c]quinolines, and oxireno[2,3-c]chromene via a palladium-catalyzed double C-H bond activation process and epoxidation, respectively.

Iodine-catalyzed three-component annulation: access to highly fluorescent trisubstituted thiophenes.

An efficient synthesis of highly fluorescent trisubstituted thiophenes was achieved via iodine-catalyzed, base-promoted annulation employing elemental sulfur as a sulfur source. The compounds exhibit excellent photophysical properties like solid-state fluorescence, high quantum yield and solvatochromism. As these thiophene derivatives have potential application in the development of optoelectronic devices, gram-scale synthesis of the desired heterocycles was demonstrated.

Diversity-Oriented Synthesis of Benzo[f][1,4]oxazepine-, 2H-Chromene-, and 1,2-Dihydroquinoline-Fused Polycyclic Nitrogen Heterocycles under Microwave-Assisted Conditions.

An efficient, diversity-oriented synthesis of oxazepino[5,4-b]quinazolin-9-ones, 6H-chromeno[4,3-b]quinolines, and dibenzo[b,h][1,6]naphthyridines was established involving a substrate-based approach under microwave-assisted and conventional heating conditions in high yields (up to 88%). The CuBr2-catalyzed, chemoselective cascade annulation of O-propargylated 2-hydroxybenzaldehydes and 2-aminobenzamides delivered oxazepino[5,4-b]quinazolin-9-ones involving a 6-exo-trig cyclization-air oxidation-1,3-proton shift-7-exo-dig cyclization sequence. This one-pot process showed excellent atom economy (-H2O) and constructed two new heterocyclic rings (six- and seven-membered) and three new C-N bonds in a single synthetic operation. On the other side of diversification, the reaction between O/N-propargylated 2-hydroxy/aminobenzaldehydes and 2-aminobenzyl alcohols delivered 6H-chromeno[4,3-b]quinolines and dibenzo[b,h][1,6]naphthyridines involving sequential imine formation-[4 + 2] hetero-Diels-Alder reaction-aromatization steps. The influence of microwave assistance was superior to conventional heating, where the reactions were clean, rapid, and completed in 15 min, and the conventional heating required a longer reaction time at a relatively elevated temperature.

Palladium-catalyzed intramolecular oxypalladation-initiated cascade: solvent-dependent chemodivergent approach to functionalized benzazepines and tetrahydroquinolines.

Palladium-catalyzed, solvent-dependent intramolecular oxypalladation-triggered domino sequences of internal alkynes bearing tethered nucleophilic carboxylic ester and electrophilic enone functionalities were developed for the chemodivergent synthesis of two completely distinct biologically significant complex molecules including isochromenone-fused benzazepines and isobenzofuranone-fused tetrahydroquinolines/chromanes in a single synthetic operation.

Electronically Robust Self-Assembled Supramolecular Gel as a Potential Material in Triboelectric Nanogenerators.

A series of self-assembling gluconamide conjugated naphthalimide amphiphiles (GCNA) was synthesized and the self-assembly of GCNA into gel rendered an increased electron density in naphthalimide moiety with an overall change in energy of 15.33×10-32  J via J-type aggregation. SEM analysis and X-ray diffraction underpinning the nanofibrillar formation, and rheological measurements confirmed the processablity and material fabrication. The enriched electron density in the aggregated GCNA4 via cooperative intermolecular non-covalent interactions makes it as effective electron donor in the fabrication of triboelectric nanogenerators (TENG). The TENG based on GCNA4-polydimethylsiloxane (PDMS) triboelectric pair generated an output voltage, current and power density of ∼250 V, 40 µA and ∼622 mW/m2 respectively, which is almost 2.4 times better in performance than the amorphous GCNA4 based TENG. The fabricated TENG can power-up 240 LEDs, wrist watch, thermometer, calculator and hygrometer.

A microwave-assisted intramolecular aminopalladation-triggered domino sequence: an atom economical route to 5,10-dihydroindeno[1,2-b]indoles.

A microwave-assisted, palladium(II)-catalyzed cascade reaction of 2-alkynylanilines tethered with an α,ß-unsaturated carbonyl moiety was established to access 5,10-dihydroindeno[1,2-b]indoles in high yields (up to 84%) in a short reaction time. This operationally simple cascade process shows 100% atom economy and allows the construction of two new five-membered rings and two new (1 C-C and 1 C-N) bonds in a single synthetic attempt. The mechanistic pathway of this reaction is visualized involving intramolecular aminopalladation (5-endo-dig) followed by carbopalladation (olefin insertion) and protonolysis steps. A systematic comparison between microwave irradiation and conventional heating methods was also performed to demonstrate the supremacy of the microwave-assisted approach. This domino reaction requires no protecting groups for the amino group and the palladium catalyst needs no ligands. To the best of our knowledge, this is the first report on microwave-assisted nucleopalladation-initiated cascade transformation.

Design, development and model analysis of lower extremity Exo-skeleton.

Over the past few years the growth and development of exo-skeleton has dramatically raised with the development of precise control elements and actuation systems. Many exo-skeleton systems have been designed, developed and tested for performance optimization. In the recent years, the significance of exo-skeleton in medical fields have got increased and are used in providing therapy and rehabilitation to the patients. With this development there comes the importance for analysis and control of the exo-skeleton for precise functioning and to avoid malfunction of the system in the later part. Dynamic analysis of limb joints is essential to better facilitate a deeper understanding of the exo-skeleton limb during various environmental conditions like varied loading. The dynamic model so developed will assist in choosing an apt actuation system based on the torque requirement of the model.This paper focusses on the analysis of a 2DOF lower limb active control exo-skeleton system and makes a torque calculation for actuator selection for the lower limb to provide rehabilitation to the patients as wearable walking aid. The work also makes a trajectory planning for the lower limb to move in sequence for making a walking cycle with angular limitations to avoid damage to the user's limbs. The motion analysis for the developed lower limb Exoskeleton as per the analysis is 52.055 Nm at hip joint 11.677 Nm at knee joint.

Hybrid hydrogels derived from renewable resources as a smart stimuli responsive soft material for drug delivery applications.

The design and synthesis of amphiphilic molecules play a crucial role in fabricating smart functional materials via self-assembly. Especially, biologically significant natural molecules and their structural analogues have inspired chemists and made a major contribution to the development of advanced smart materials. In this report, a series of amphiphilic N-acyl amides were synthesized from natural precursors using a simple synthetic protocol. Interestingly, the self-assembly of amphiphiles 6a and 7a furnished a hydrogel and oleogel in vegetable oils. Morphological analysis of gels revealed the existence of a 3-dimensional fibrous network. Thermoresponsive and thixotropic behavior of these gels were evaluated using rheological analysis. A composite gel prepared by the encapsulation of curcumin in the hydrogel formed from 7a displayed a gel-sol transition in response to pH and could act as a dual channel responsive drug carrier.

Alleviation of neuropathic pain by trazodone in rats

Abstract Neuropathic pain is generally characterised by an abnormal sensation (dysesthesia), an increased response to painful stimuli (hyperalgesia), and pain in response to a stimulus that does not normally provoke pain (allodynia). The present study was designed to investigate the effect of trazodone (5mg/kg and 10mg/kg) on peripheral neuropathic pain induced by partial sciatic nerve ligation in rats. Mechanical hyperalgesia, cold allodynia and thermal hyperalgesia were assessed by performing the pinprick, acetone, and hot plate tests, respectively. Biochemically, lipid peroxidation level and total calcium levels were measured. However, trazodone administration (5 and 10 mg/ kg i.p.) for 21days significantly diminished partial sciatic nerve ligation-induced neuropathic pain along with areduction in oxidative stress and calcium levels. The results of the present study suggest that trazodone is effective in attenuating partial sciatic nerve ligation-inducedpainful neuropathic states, which may be attributed to decreased oxidative stress and calcium levels.

Glycolipid-Based Oleogels and Organogels: Promising Nanostructured Structuring Agents.

Over the past few decades, the scientific community is actively involved in the development of edible structuring agents suitable for food, cosmetics, agricultural, pharmaceutical, and biotechnology applications. In particular, edible oil structuring using simple amphiphiles would be the best alternative for the currently used trans and saturated fatty acids, which cause deleterious health effects and cardiovascular problems. In this report, we have made an attempt to address the aforementioned consequences, by synthesizing a new class of structuring agents by a judicious combination of δ-gluconolactone and ricinoleic acid, compounds classified as GRAS, using simple steps in good yield. To our delight, the synthesized glycolipids self-assemble in a wide variety of vegetable oils and commercially viable glycerol, ethylene glycol, and polyethylene glycol via various intermolecular interactions to form a gel. The morphology of molecular gels was investigated by optical microscopy and FESEM analysis, which reveal the existence of a tubular architecture with a diameter ranging from 75 to 150 nm. Rheological studies disclosed the viscoelastic nature, thermal processability, and thixotropic behavior of both oleogels and organogels. Altogether, self-assembled oleogel and organogel reported in this paper would potentially be used in food, agricultural, cosmetics, pharmaceutical, and biotechnological applications.

Regioselective synthesis of tetrahydroquinolines via syn- and anti-nucleopalladation-initiated cascade processes.

Palladium(ii)-catalyzed regioselective syn-chloropalladation and anti-acetoxypalladation-initiated cascade processes were developed for the synthesis of functionalized tetrahydroquinolines. A series of N-propargyl arylamines tethered with an α,ß-unsaturated carbonyl scaffold underwent atom economical cascade reactions to deliver chloro- and acetoxy-substituted tetrahydroquinolines bearing an exocyclic double bond in high yields. A mechanism is proposed for these cascade processes involving a sequential syn-chloropalladation or anti-acetoxypalladation of alkynes followed by intramolecular olefin insertion (6-exo-trig) and protonolysis steps. The reaction was completely regioselective and the terminal aryl/alkyl group of the propargyl moiety dictated the regiochemistry of the initial nucleopalladation. The role of the bidentate nitrogen ligand is crucial to trigger the acetoxypalladation-initiated cascade sequence in contrast to the chloropalladation-initiated process.

An injectable self-healing anesthetic glycolipid-based oleogel with antibiofilm and diabetic wound skin repair properties.

Globally, wound infections are considered as one of the major healthcare problems owing to the delayed healing process in diabetic patients and microbial contamination. Thus, the development of advanced materials for wound skin repair is of great research interest. Even though several biomaterials were identified as wound healing agents, gel-based scaffolds derived from either polymer or small molecules have displayed promising wound closure mechanism. Herein, for the first time, we report an injectable and self-healing self-assembled anesthetic oleogel derived from glycolipid, which exhibits antibiofilm and wound closure performance in diabetic rat. Glycolipid derived by the reaction of hydrophobic vinyl ester with α-chloralose in the presence of novozyme 435 undergoes spontaneous self-assembly in paraffin oil furnished an oleogel displaying self-healing behavior. In addition, we have prepared composite gel by encapsulating curcumin in the 3D fibrous network of oleogel. More interestingly, glycolipid in its native form demoed potential in disassembling methicillin-resistant Staphylococcus aureus, methicillin-susceptible Staphylococcus aureus, and Pseudomonas aeruginosa biofilms. Both oleogel and composite gel enhanced the wound skin repair in diabetic induced Wistar rats by promoting collagen synthesis, controlling free radical generation and further regulating tissue remodeling phases. Altogether, the reported supramolecular self-assembled anesthetic glycolipid could be potentially used for diabetic skin wound repair and to treat bacterial biofilm related infections.

Direct Access to Bridged Tetrahydroquinolines and Chromanes via an InCl3-Catalyzed Sequential Three-Component Cascade.

A sequential three-component cascade process was developed for the synthesis of bridged tetrahydroquinolines and chromanes bearing 2,6-methanobenzo[d][1,3]diazocine and 2,6-methanobenzo[g][1,3]oxazocine scaffolds, respectively, in good yields from readily available materials. The InCl3-catalyzed reaction progressed via enamine formation, Michael addition, intramolecular cyclization, and intramolecular iminium ion cyclization steps. Notably, this high atom economic approach (-2H2O) allowed the generation of four new bonds (1 C-C and 3 C-N or 1 C-C, 1 C-O and 2 C-N) and two heterocyclic rings in a single operation.

N-Heterocyclic Carbene Catalyzed Synthesis of Trisubstituted Epoxides via Tandem Amidation/Epoxidation Sequence.

A tandem amidation/epoxidation sequence between various substituted chalcones and N,N-dimethylformamide (DMF) for the synthesis of trisubstituted epoxides employing N-heterocyclic carbene catalysis was developed. This reaction was performed under metal-free conditions in the presence of tert-butyl hydroperoxide (TBHP) as the oxidant. Trisubstituted epoxides bearing a ketone and an amide functionality (N,N-dimethyl formyl group) were synthesized starting from a wide range of chalcones in moderate to good yields with excellent diastereoselectivity.

Smart supramolecular gels of enolizable amphiphilic glycosylfuran.

The implementation of a novel approach in the development of stimuli responsive supramolecular gels is an important objective that challenges material chemists and biologists in order to access an exclusively new category of smart materials. In this report, non-toxic, bio-based amphiphilic glycosylfurans were designed and synthesized using a biocatalyst, Novozyme 435, an immobilized lipase B from Candida antarctica. The self-assembly of these compounds generated oleogels and hydrogels. To our delight, these bio-based amphiphilic glycosylfurans furnished an in situ stimuli responsive hydrogel with simultaneous encapsulation of various biologically relevant molecules and ions. For the first time we are reporting hydrogelation via in situ molecular tuning followed by a self-sorting mechanism. The sol-to-gel transition in the reported smart hydrogel was observed by the addition of acidic buffer of pH 4.0, which could be potentially used for the stimuli responsive delivery of a signalling molecule, H2S and other biomolecules that regulate many physiological and pathological processes.

Heterogeneous Amberlyst-15-catalyzed synthesis of complex hybrid heterocycles containing [1,6]-naphthyridine under metal-free green conditions.

An efficient green protocol for the synthesis of complex hybrid heterocycles containing [1,6]-naphthyridine and coumarin/pyrazole moieties was established, involving an intramolecular [4 + 2] hetero Diels-Alder reaction as the key step. The biologically significant 12,13-dihydro-6H-benzo[h]chromeno[3,4-b][1,6]naphthyridin-6-ones and 6,10-dihydro-5H-benzo[h]pyrazolo[3,4-b][1,6]naphthyridines were synthesized starting from 2-(N-propargylamino)-arylaldehydes and 3-aminocoumarins or 3-methyl-1-aryl-1H-pyrazol-5-amines in the presence of an Amberlyst-15 catalyst in PEG-200 in good yields. The easy access to diverse complex molecules in a single operation from readily available starting materials, a commercially available, transition metal-free and recyclable catalyst, the use of a green solvent, a very high atom economy and the release of water as the only side product are the highlights of this protocol.

Direct Access to 9-Chloro-1H-benzo[b]furo[3,4-e]azepin-1-ones via Palladium(II)-Catalyzed Intramolecular syn-Oxypalladation/Olefin Insertion/sp2-C-H Bond Activation Cascade.

An efficient Pd(II)-catalyzed cascade approach was established for the synthesis of 9-chloro-1H-benzo[b]furo[3,4-e]azepin-1-ones starting from N-propargyl arylamines having a pendant α,ß-unsaturated ester scaffold. The mechanism of this sequential process involved intramolecular syn-oxypalladation followed by olefin insertion and ortho sp2-C-Cl bond formation reactions. This high atom- and step-economical cascade sequence generated two heterocycle rings and three new bonds in a single synthetic operation.

Palladium-Catalyzed Regioselective Syn-Chloropalladation-Olefin Insertion-Oxidative Chlorination Cascade: Synthesis of Dichlorinated Tetrahydroquinolines.

A palladium catalyzed cascade process involving syn-chloropalladation, intramolecular olefin insertion, and oxidative C-Cl bond formation reactions was demonstrated for the synthesis of dichlorinated tetrahydroquinolines in high yields (up to 93%). The N-propargyl arylamines having a tethered α,ß-unsaturated carbonyl moiety underwent a regioselective syn-chloropalladation followed by a Heck-type reaction to deliver the tetrahydroquinoline scaffold. The rare insertion of the second chlorine atom was rationalized comprising a PdII/IV catalytic cycle and oxidative cleavage of the C-PdII bond.

Diastereoselective ABB' Three-Component Synthesis of Highly Functionalized Spirooxindoles Bearing Five Consecutive Asymmetric Carbons.

The synthesis of spirooxindoles bearing tetrahydro-4 H-cyclopenta[ b]furan framework was established starting from isatin-derived aldehydes and 2 equiv of 1,3-dicarbonyl compounds involving a piperidine-catalyzed ABB' three-component domino process. This reaction was highly diastereoselective affording a single diastereomer of spirooxindoles with five consecutive asymmetric carbons including spiro and tetrasubstituted carbon centers. In addition, this waste-free (-2H2O) reaction showed high atom economy and step economy by creating four new bonds, including three C-C bonds and one C-O bond, and two rings (one carbo- and one heterocyclic) in a single operation. The mechanism of this three-component domino process involved sequential Knoevenagel condensation-Michael addition-intramolecular oxa-Michael addition-intramolecular aldol reactions.