SU-E-I-56: Threshold Effect of ASIR Before Which Image Improve and After Which Image Degrades.

PURPOSE: This study showed to what extent ASIR improves CT-image and to what extent it degrades it. METHODS: In our study we used GE HD750 CT-scanner, Siemens Sensation CT-scanner, Catphan, PTW-pin-ion- chamber, CTDI-phantom. We measured the CT-dose using the PTW-pinion-chamber and CTDI-phantom. Image-quality and noise were evaluated using catphan and GE water phantom. RESULTS: Image noise reduce as higher levels of ASIR are applied. A phantom scan showed that 50%ASIR with 50% lower-dose (10.8mGy) achieved the same image noise of standard FBP image with full dose 21.7mGy (noise∼5). To confirm that the two same-noise images retain same image-quality, two scans were compared; one with full dose 260mAs(21.7mGy) and the other one with 50% lower dose 130mAs(10.8mGy). The results showed that ASIR failed to retain the same quality. For high contrast resolution, 50%ASIR reduced the resolution of patterns = 71p/cm, however it improved the detectability of patterns = 61p/cm. ASIR has degraded the CNR of the low-contrast-objects of = 5HU (CNR of 1.4 at 260mAs STND to CNR of 1.08 at 130mAs ASIR), however it improved the CNR of the low-contrast-objects of = 10HU (CNR of 2.35 at 260mAs STND to CNR of 2.63 at 130mAs ASIR). ASIR degraded the edges and killed some of the small objects. This shows that ASIR has a critical point of improve/degrade. Also, ASIR can improve images for the same dose, but with high levels of ASIR (e.g. 100%ASIR), cause disapear of small low contrast objects (e.g. 2mm). CONCLUSIONS: People think that ASIR only improves image and reduces patient dose. Our study showed that ASIR has some drawbacks. There is a threshold before wich ASIR is positive and after which ASIR is negative. Recently only GE provide ASIR in the market but our study showed that other CTs such as Siemens can do similar performance like ASIR.

Microscintigraphy with high resolution collimators and radiographic detectors.

The potential use of high resolution collimators with standard radiographic detectors in place of conventional gamma cameras for high resolution microscintigraphy is presented. Polycapillary multiple hole collimators are shown to provide 10-100 micron scale spatial resolution. A series of images from arrays of 125I brachytherapy seeds in Lucite phantoms display resolution better than 0.1 mm with good sensitivity and a 30 mm field of view. In addition to application to brachytherapy seed localization, such "cellular" level resolution is necessary for high-resolution in vivo imaging in mouse models. The system could also enable the use of a wider variety of isotopes, including much lower photon energy isotopes in nuclear medicine, as the high resolution collimator allows more flexibility in detector constraints.

The influence of bowtie filtration on cone-beam CT image quality.

The large variation of x-ray fluence at the detector in cone-beam CT (CBCT) poses a significant challenge to detectors' limited dynamic range, resulting in the loss of skinline as well as reduction of CT number accuracy, contrast-to-noise ratio, and image uniformity. The authors investigate the performance of a bowtie filter implemented in a system for image-guided radiation therapy (Elekta oncology system, XVI) as a compensator for improved image quality through fluence modulation, reduction in x-ray scatter, and reduction in patient dose. Dose measurements with and without the bowtie filter were performed on a CTDI Dose phantom and an empirical fit was made to calculate dose for any radial distance from the central axis of the phantom. Regardless of patient size, shape, anatomical site, and field of view, the bowtie filter results in an overall improvement in CT number accuracy, image uniformity, low-contrast detectability, and imaging dose. The implemented bowtie filter offers a significant improvement in imaging performance and is compatible with the current clinical system for image-guided radiation therapy.

An empirical method for lag correction in cone-beam CT.

Image lag degrades image quality in cone-beam CT (CBCT), resulting in contrast reduction, lack of CT number accuracy and uniformity, and skin-line artifacts. The magnitude of such degradation and the extent to which imaging performance can be improved by means of a lag correction method were investigated. Measurements were performed using a radiotherapy CBCT guidance system (Elekta Synergy XVI, Elekta Oncology Systems, Atlanta, GA), for which the imaging system is based upon a RID1640-AL1 flat-panel imager (Perkin Elmer, Wiesbaden, Germany). Image lag and its relationship to various parameters including signal magnitude, photon energy, and frame number were investigated, and an empirical lag correction method was developed to manage lag artifacts. The correction method was simply the subtraction from the current frame by previous frames weighted by the temporal response function. The CatPhan 500 phantom (The Phantom Laboratory, Salem, NY) within an irregularly shaped body annulus was used to demonstrate the magnitude of artifacts with and without lag correction. CBCT images after correction demonstrated improvement in skin-line reconstruction, CT number accuracy, image uniformity, and contrast-to-noise ratio. Lag artifacts can be reduced by means of algorithmic correction of the projection images. Lag correction is most important for all shapes of objects having contrast inserts. For circular/cylindrical objects, lag correction does not improve the skin-line artifact but can improve low contrast visibility adjacent to high contrast objects.