Modelo impreso en 3D para entrenamiento en ureteroscopia flexible, una opción de bajo coste para el entrenamiento quirúrgico / 3D printed model for flexible ureteroscopy training, a low-cost option for surgical training

Introducción La práctica en modelos experimentales es una opción válida que mejora los resultados y acorta las curvas de aprendizaje de las técnicas quirúrgicas.Nuestro objetivo fue desarrollar un modelo en plástico, impreso en 3D para la docencia, el entrenamiento y la formación en ureteroscopia flexible, analizando costes e idoneidad para la práctica de esta técnica quirúrgica.Métodos Se elaboró un modelo impreso en 3D a partir de una tomografía axial computarizada de una vía urinaria superior de un paciente real. La segmentación se llevó a cabo mediante el software HorosTM y la impresión mediante una impresora FDM-Ultimaker.Se numeró los cálices renales para ser identificados, como en el plan de formación de tratamiento endoscópico de litiasis, ejercicio 4, de la Asociación Europea de Urología.Se utilizaron: un ureteroscopio flexible desechable Innovex (Palex) y cestillas de nitinol (Coloplast).Resultados El tiempo de impresión fue de 19h, con un coste total de 8,77€.El modelo tridimensional permitió la introducción del ureteroscopio flexible y la exploración de los cálices renales por parte de urólogos tanto en formación como en ejercicio actual de la especialidad sin dificultad.El modelo también permitió la utilización de cestillas y la movilización y extracción de litiasis previamente colocadas.Conclusión Damos a conocer un modelo tridimensional válido para ejercicios de formación en ureteroscopia flexible con unos costes razonables, que permitirá adquirir la destreza y la confianza necesaria para iniciar el procedimiento en un escenario real (AU)

Introduction Training in experimental models is a valid option that improves the outcomes and shortens surgical learning curves.Our objective was to develop a 3D printed plastic model for teaching, training and education in flexible ureteroscopy, analyzing costs and suitability for the practice of this surgical technique.Methods A 3D printed model was developed based on a CT scan from a real-life patient's upper urinary tract. HorosTM software was used for segmentation and an FDM-Ultimaker for 3D printing.Renal calyces were numbered to be identified, as in the European Association of Urology Endoscopic Stone Treatment training curriculum, Task 4.The following were used: Innovex single-use flexible ureteroscope (Palex) and nitinol baskets (Coloplast).Results Printing time was 19hours, with a total cost of €8.77.The three-dimensional model allowed the insertion of the flexible ureteroscope and the exploration of the renal calyces by urologists in training as well as in current practice of the specialty without difficulty.The model also allowed the use of baskets and the mobilization and removal of previously placed stones.Conclusion We unveil a valid three-dimensional model for flexible ureteroscopy training exercises with reasonable costs, which will allow acquiring the necessary skills and confidence to initiate the procedure in a real-life scenario (AU)

3D printed model for flexible ureteroscopy training, a low-cost option for surgical training.

INTRODUCTION: Training in experimental models is a valid option that improves the outcomes and shortens surgical learning curves. Our objective was to develop a 3D printed plastic model for teaching, training and education in flexible ureteroscopy, analyzing costs and suitability for the practice of this surgical technique. METHODS: A 3D printed model was developed based on a CT scan from a real-life patient's upper urinary tract. Horos™ software was used for segmentation and an FDM-Ultimaker for 3D printing. Renal calyces were numbered to be identified, as in the European Association of Urology Endoscopic Stone Treatment training curriculum, Task 4. The following were used: Innovex single-use flexible ureteroscope (Palex) and nitinol baskets (Coloplast). RESULTS: Printing time was 19 h, with a total cost of €8.77. The three-dimensional model allowed the insertion of the flexible ureteroscope and the exploration of the renal calyces by urologists in training as well as in current practice of the specialty without difficulty. The model also allowed the use of baskets and the mobilization and removal of previously placed stones. CONCLUSION: We unveil a valid three-dimensional model for flexible ureteroscopy training exercises with reasonable costs, which will allow acquiring the necessary skills and confidence to initiate the procedure in a real-life scenario.

Evaluation of teleconsultation system in the urological patient during the COVID-19 pandemic. / Evaluación de la teleconsulta en el paciente urológico durante la pandemia COVID-19.

INTRODUCTION: The global pandemic of COVID-19 has led to rapid implementation of telemedicine, but there is little information on patient satisfaction of this system as an alternative to face-to-face care. OBJECTIVE: To evaluate urological patient satisfaction with teleconsultation during the COVID-19 pandemic. MATERIAL AND METHODS: Observational, prospective, cross-sectional, non-interventional study carried out by telephone survey during the period considered as the peak of the pandemic (March-April 2020). A quality survey composed of 11 questions on urological care provided by physicians during the COVID-19 pandemic was conducted, selecting a representative sample of patients attended by teleconsultation. RESULTS: Two hundred patients were contacted by telephone to answer a survey on the quality of teleconsultation. The distribution of patients surveyed among the specialized consultations was homogeneous with the number of consultations cited in the period; 18% of them required assistance from family members. Sixty percent of patients avoided going to a medical center during the pandemic. Of the surveyed patients, 42% had cancelled diagnostic tests, 59% had cancelled medical consultations, 3.5% had cancelled treatments and 1% had cancelled interventions. Ten percent reported a worsening of urological symptoms during confinement. According to physicians, consultations were effectively delivered in 72% of cases, with teleconsultation being carried out by their usual urologist in 81%. Teleconsultation overall satisfaction level was 9 (IQI8-10), and 61.5% of respondents consider teleconsultation as a «health care option¼ after the healthcare crisis. CONCLUSION: Teleconsultation has been evaluated with a high level of satisfaction during the COVID-19 pandemic, offering continuous care to urological patients during the healthcare crisis. The perceived quality offers a field of optional telematic assistance in selected patients, which should be re-evaluated in a period without confinement measures.

Small-calibre percutaneous nephrolithotomy (SC-PCNL). Therapeutic decision algorithm. / Nefrolitectomía percutánea de calibre reducido (NLP-CR). Algoritmo de decisión terapéutica.

INTRODUCTION: The progressive reduction in the calibre of the tract in percutaneous kidney surgery to the point of miniaturisation has expanded its use to smaller stones that until now have been treated with extracorporeal shock wave lithotripsy (ESWL) and retrograde intrarenal surgery (RIRS). OBJECTIVE: To provide an update on the various techniques of small-calibre nephrolithotomy (SC-PCNL) analyse their efficacy, safety and indications and determine their degree of implantation at this time. MATERIAL AND METHODS: We performed a review in PubMed of Spanish and English medical literature on the various techniques of SC-PCNL. RESULTS: The use of SC-PCNL has reduced the morbidity associated with standard PCNL, particularly bleeding, and has enabled tubeless nephrolithotomy with greater safety. There are various techniques with blurred terminology (Miniperc, Microperc, Mini-microperc, Ultraminiperc), which differ in terms of gauge employed and in certain technical aspects that require their indications be specified. Currently, SC-PCNL competes with techniques that are less invasive than standard PCNL such as ESWL and the RIRS in treating small stones, but the role of SC-PCNL is still not sufficiently understood and continues to be the subject of debate. CONCLUSIONS: The indications for PCNL are expanding to small stone sizes due to the miniaturisation of the technique. PCNL competes in this field with ESWL and RIRS. Larder studies are needed to establish the specific indications for PCNL in treating nephrolithiasis.

Outcomes of transurethral resection (TUR) of intravesical mesh after suburethral slings in the treatment of urinary stress incontinence.

OBJECTIVE: The objective of this study was to determine the efficacy as well as the complications associated with transurethral removal (TUR) of intravesical mesh after suburethral sling, transobturator tape-TOT (Monarc™) or "minisling" (MiniArc(®)), in the treatment of female urinary stress incontinence (USI). MATERIAL AND METHODS: retrospective and consecutive study on 9 women with bladder perforation after midurethral slings (3 Monarc™ and 6 MiniArc®) placement for urinary stress incontinence. To remove the mesh, transurethral resection with an electrode loop (TUR-E) was used. The technique included: location and total removal of mesh with bipolar resectoscope up to healthy tissue. RESULTS: The median age was 61 years (49-70 years). The median time between midurethral sling placement and onset the sympltoms was 13 months (1-79 months). and between sling placement and mesh removal was 16 months (1-91 months). Five women (55.5%) developed bladder stones. Mean operating time was 29.4 ± 10.4 minutes and mean length of hospital stay was 2.6 ± 0.5 days. The median follow-up after mesh removal was 38 months (range, 14 to 109 months). No complications were found. CONCLUSIONS: The use of transurethral resection of intravesical mesh after suburethral slings is easy and the results obtained by our surgical team are excellent.