Selective mass enhancement close to the quantum critical point in BaFe2(As1-x P x )2.

A quantum critical point (QCP) is currently being conjectured for the BaFe2(As1-x P x )2 system at the critical value x c ≈ 0.3. In the proximity of a QCP, all thermodynamic and transport properties are expected to scale with a single characteristic energy, given by the quantum fluctuations. Such a universal behavior has not, however, been found in the superconducting upper critical field H c2. Here we report H c2 data for epitaxial thin films extracted from the electrical resistance measured in very high magnetic fields up to 67 Tesla. Using a multi-band analysis we find that H c2 is sensitive to the QCP, implying a significant charge carrier effective mass enhancement at the doping-induced QCP that is essentially band-dependent. Our results point to two qualitatively different groups of electrons in BaFe2(As1-x P x )2. The first one (possibly associated to hot spots or whole Fermi sheets) has a strong mass enhancement at the QCP, and the second one is insensitive to the QCP. The observed duality could also be present in many other quantum critical systems.

Universal lower limit on vortex creep in superconductors.

Superconductors are excellent testbeds for studying vortices, topological excitations that also appear in superfluids, liquid crystals and Bose-Einstein condensates. Vortex motion can be disruptive; it can cause phase transitions, glitches in pulsars, and losses in superconducting microwave circuits, and it limits the current-carrying capacity of superconductors. Understanding vortex dynamics is fundamentally and technologically important, and the competition between thermal energy and energy barriers defined by material disorder is not completely understood. Specifically, early measurements of thermally activated vortex motion (creep) in iron-based superconductors unveiled fast rates (S) comparable to measurements of YBa 2Cu3O7-δ (refs ,,,,,). This was puzzling because S is thought to somehow correlate with the Ginzburg number (Gi), and Gi is significantly lower in most iron-based superconductors than in YBa 2Cu3O7-δ. Here, we report very slow creep in BaFe 2(As0.67P0.33)2 films, and propose the existence of a universal minimum realizable S ∼ Gi1/2(T/Tc) (Tc is the superconducting transition temperature) that has been achieved in our films and few other materials, and is violated by none. This limitation provides new clues about designing materials with slow creep and the interplay between material parameters and vortex dynamics.

Synergetic combination of different types of defect to optimize pinning landscape using BaZrO(3)-doped YBa(2)Cu(3)O(7).

Retaining a dissipation-free state while carrying large electrical currents is a challenge that needs to be solved to enable commercial applications of high-temperature superconductivity. Here, we show that the controlled combination of two effective pinning centres (randomly distributed nanoparticles and self-assembled columnar defects) is possible and effective. By simply changing the temperature or growth rate during pulsed-laser deposition of BaZrO(3)-doped YBa(2)Cu(3)O(7) films, we can vary the ratio of these defects, tuning the field and angular critical-current (Ic) performance to maximize Ic. We show that the defects' microstructure is governed by the growth kinetics and that the best results are obtained with a mixture of splayed columnar defects and random nanoparticles. The very high Ic arises from a complex vortex pinning landscape where columnar defects provide large pinning energy, while splay and nanoparticles inhibit flux creep. This knowledge is used to produce thick films with remarkable Ic(H) and nearly isotropic angle dependence.

Pseudoisotropic upper critical field in cobalt-doped SrFe2As2 epitaxial films.

We present resistivity measurements of the complete superconducting upper critical field (H{c2}) phase diagram as a function of angle (theta) and temperature (T) for cobalt-doped SrFe2As2 epitaxial films to 0.5 K and 50 T. Although H{c2}(theta) at 10 K is indistinguishable from that derived from a single-band anisotropy model, the apparent anisotropy H{c2}{ perpendicularc}/H{c2};{ parallelc} linearly decreases to 1 at low T, with H{c2}(0)=47 T. The data are well described by a two-band model with small, opposing anisotropies for the bands. This unusual relationship is confirmed by the observation of a local maximum for H{c2};{ parallelc} at low T.

Smectic vortex phase in optimally doped YBa2Cu3O7 thin films.

Angular dependent resistivity measurements of optimally doped YBa2Cu3O7 films in fields H pulsed to 50 T are presented. Up to the highest H, the vortex melting field Hm increases and vortex motion is reduced for H aligned with the correlated pinning centers along the main crystalline axes, otherwise 3D anisotropic scaling describes the vortex dynamics. For H parallel ab, the rapid increase in Hm at low temperatures and a critical exponent analysis near Hm confirm the presence of the liquid-crystalline smectic phase predicted for layered superconductors.

Materials science challenges for high-temperature superconducting wire.

Twenty years ago in a series of amazing discoveries it was found that a large family of ceramic cuprate materials exhibited superconductivity at temperatures above, and in some cases well above, that of liquid nitrogen. Imaginations were energized by the thought of applications for zero-resistance conductors cooled with an inexpensive and readily available cryogen. Early optimism, however, was soon tempered by the hard realities of these new materials: brittle ceramics are not easily formed into long flexible conductors; high current levels require near-perfect crystallinity; and--the downside of high transition temperature--performance drops rapidly in a magnetic field. Despite these formidable obstacles, thousands of kilometres of high-temperature superconducting wire have now been manufactured for demonstrations of transmission cables, motors and other electrical power components. The question is whether the advantages of superconducting wire, such as efficiency and compactness, can outweigh the disadvantage: cost. The remaining task for materials scientists is to return to the fundamentals and squeeze as much performance as possible from these wonderful and difficult materials.

Magneto-optical evidence for a gapped fermi surface in underdoped YBa2Cu3O6+x.

The infrared (900-1100 cm(-1)) Faraday rotation and circular dichroism are measured in the normal state of underdoped High T(c) superconductors and used to study the magnetotransport. YBa2Cu3O6+x thin films are investigated in the temperature range 10-300 K in magnetic fields up to 8 T and as a function of oxygen concentration. A dramatic increase of the Hall frequency is observed for underdoped samples, which is not consistent with the approach to a Mott transition but is consistent with a partial gapping of the Fermi surface as predicted in density wave models.

Strongly enhanced current densities in superconducting coated conductors of YBa2Cu3O7-x + BaZrO3.

There are numerous potential applications for superconducting tapes based on YBa(2)Cu(3)O(7-x) (YBCO) films coated onto metallic substrates. A long-established goal of more than 15 years has been to understand the magnetic-flux pinning mechanisms that allow films to maintain high current densities out to high magnetic fields. In fact, films carry one to two orders of magnitude higher current densities than any other form of the material. For this reason, the idea of further improving pinning has received little attention. Now that commercialization of YBCO-tape conductors is much closer, an important goal for both better performance and lower fabrication costs is to achieve enhanced pinning in a practical way. In this work, we demonstrate a simple and industrially scaleable route that yields a 1.5-5-fold improvement in the in-magnetic-field current densities of conductors that are already of high quality.

Anomalous proximity effect in underdoped YBa2Cu3O6+x josephson junctions

Josephson junctions were photogenerated in underdoped thin films of the YBa2Cu3O6+x family using a near-field scanning optical microscope. The observation of the Josephson effect for separations as large as 100 nm between two wires indicates the existence of an anomalously large proximity effect and shows that the underdoped insulating material in the gap of the junction is readily perturbed into the superconducting state. The critical current of the junctions was found to be consistent with the conventional Josephson relationship. This result appears to constrain the applicability of SO(5) theory to explain the phase diagram of high critical temperature superconductors.

Inducing superconductivity at a nanoscale: photodoping with a near-field scanning optical microscope.

The local modification of an insulating GdBa2Cu3O6.5 thin film, made superconducting by illumination with a near-field scanning optical microscope (NSOM), is reported. A 100-nm aperture NSOM probe acts as a sub-wavelength light source of wavelength lambda(exc) = 480-650 nm, locally generating photocarriers in an otherwise insulating GdBa2-Cu3O6.5 thin film. Of the photogenerated electron-hole pairs, electrons are trapped in the crystallographic lattice, defining an electrostatic confining potential to enable the holes to move. Reflectance measurements at lambda = 1.55 microm at room temperature show that photocarriers can be induced and constrained to move on a approximately 200 nm scale for all investigated lambda(exc). Photogenerated wires present a superconducting critical temperature Tc= 12 K with a critical current density Jc = 10(4) A cm(-2). Exploiting the flexibility provided by photodoping through a NSOM probe, a junction was written by photodoping a wire with a narrow (approximately 50 nm) under-illuminated gap. The strong magnetic field modulation of the critical current provides a clear signature of the existence of a Josephson effect in the junction.