Sustainable valorisation pathways mitigating environmental pollution from brewers' spent grains.

In this work, valorisation pathways of brewers' spent grains (BSG) towards biofuels production under the biorefinery concept were studied utilizing experimental data that provide a common base for straightforward comparison. The dehydration and the recovery of used oil, bioethanol and biogas from BSG were studied. The process units involved were thoroughly investigated and optimized. The oil extraction efficiency reached up to 70% using solid-liquid extraction process with hexane as solvent. The optimal ethanol yield achieved was 45% after the application of acid pretreatment, enzymatic hydrolysis with CellicCTec2 and fermentation with S. Cerevisiae. As far as biogas potential is concerned, the raw BSG, defatted BSG and stillage presented values equal to 379 ± 19, 235 ± 21 and 168 ± 39 mL biogas/g for respectively. Through the combination of the proposed schemes, three biorefinery scenarios were set up able to produce biodiesel, bioethanol and/or biogas. Material flow diagrams were set up in order to assess these schemes. Given that BSG could ensure 'green' energy production in the range of 4.5-7.0 million MJ/y if the European BSG potential is fully valorised, BSG could substantially contribute to the biofuel energy strategy.

Towards upscaling the valorization of wheat straw residues: alkaline pretreatment using sodium hydroxide, enzymatic hydrolysis and biogas production.

Lignocellulosic biomass is considered as a recalcitrant substrate for anaerobic digestion due to its complex nature that limits its biological degradation. Therefore, suitable preprocessing for the improvement of the performance of conventional anaerobic digestion remains a challenge in the development of anaerobic digestion technology. The physical and chemical characteristics of wheat straw (WS), as a representative lignocellulosic biomass, have a significant impact on the anaerobic digestion process in terms of quantity and quality of the produced biogas. This study aimed at investigating the enzymatic saccharification and detoxification of straw prior to anaerobic digestion with the final objective of enhancing the performance of conventional anaerobic systems of recalcitrant fractions of agricultural waste. The experimental activity was performed in lab and pilot scale treating WS. Alkaline delignification of straw using sodium hydroxide (NaOH) was studied prior to enzymatic hydrolysis for the production of easily biodegradable sugars. After defining the optimum conditions for the pretreatment scheme, the anaerobic digestability of the effluents produced was measured. Finally, the final liquid effluents were fed to a pilot scale anaerobic digester of 0.5 m3 volume, applying an increasing organic loading rate (OLR) regime (in terms of chemical oxygen demand (COD) from 0.2 to 15 kg COD/m3/day). The optimum conditions for the delignification and enzymatic hydrolysis of WS were defined as 0.5 M NaOH at 50 °C for 3-5 h and 15 µL Cellic CTec2/g pretreated straw at 50 °C. It was proven that the resulting liquid effluents could be fed to an anaerobic digester in the ratio that they are produced with satisfactory COD removal efficiencies (over 70%) for OLRs up to 10 kg COD/m3/day. This value is correspondent to a hydraulic retention time of around 7.5 days, much lower than the respective one for untreated straw (over 12 days).

Effect of alkaline pretreatments on the enzymatic hydrolysis of wheat straw.

Lignocellulosic materials are mainly consisted of lignin, cellulose, and hemicellulose. Lignin is recognized as the main obstacle for the enzymatic saccharification of cellulose towards the fermentable sugars' production. Hence, the removal of lignin from the lignocellulosic feedstock is beneficial for reducing the recalcitrance of lignocellulose for enzymatic attack. For this purpose, various different alkaline pretreatments were examined in order to study their effect on the enzymatic saccharification of wheat straw, as a typical lignocellulosic material. Results revealed that the alkaline pretreatments promoted delignification reactions. Regarding the removal of lignin, the most efficient pretreatments were alkaline treatment with hydrogen peroxide 10% and NaOH 2% autoclave with delignification efficiencies of 89.60% and 84.86% respectively. X-ray diffraction analysis was performed to enlighten the structural changes of raw and pretreated materials. The higher the delignification of the raw material, the higher the conversion of cellulose during enzymatic saccharification. In all cases after enzymatic saccharification, the cellulosic conversion was much higher (32-77%) than the untreated wheat straw (8.6%). After undergoing alkaline peroxide 10% pretreatment and cellulase treatment, 99% of the initial raw straw was eventually solubilized. Thus, wheat straw could be considered as an ideal material for the production of glucose with proper pretreatments and effective enzymatic hydrolysis.

Assessing the alteration of physicochemical characteristics in composted organic waste in a prototype decentralized composting facility.

This article presents the pilot experience of an integrated biowaste management system developed in Tinos island, Greece, which promoted source separation and decentralized composting in a prototype unit. This system was introduced as a new-to-the-area of implementation and innovation, since landfilling of mixed municipal solid waste has been the common practice in Tinos island, as in many other areas of insular and mainland Greece. The biowaste management system was implemented through a bring scheme that aimed at motivating the public to separate at source the organic fraction of MSW. The system was monitored on an input-output basis of critical parameters used to assess the purity of separately collected biowaste, the treatment efficiency of the prototype unit, the quality characteristics of compost produced, and public's awareness and participation. Results showed that biowaste source separation was practiced effectively by citizens, giving high-purity feed (> 98%). Compost samples were examined in comparison with the proposed EU End-of-Waste (EoW) quality criteria and fulfilled the requirements set. More specifically, the average values of compost samples regarding heavy metal content were 72% lower than the EoW limit value for Cd, 43% lower for Ni, 38% lower for Pd, 24% lower for Cu, and 36% lower for Zn. Examined composts also met the EoW criteria for phytotoxicity and pathogenic or parasitic microorganisms, while they showed an approx. 15% decrease in initial organic matter content. Moreover, this study analyzed the carbon balances and the degree that composting can sequestrate carbon. Overall, this study demonstrated that the development and operation of on-island, decentralized composting, when properly practiced, is a sustainable option in order for islands and remote areas to adopt a closed loop approach to the biowaste management problem, in line with the circular economy principles.

Modeling the emissions of a dual fuel engine coupled with a biomass gasifier-supplementing the Wiebe function.

There is a growing market demand for small-scale biomass gasifiers that is driven by the economic incentives and the legislative framework. Small-scale gasifiers produce a gaseous fuel, commonly referred to as producer gas, with relatively low heating value. Thus, the most common energy conversion systems that are coupled with small-scale gasifiers are internal combustion engines. In order to increase the electrical efficiency, the operators choose dual fuel engines and mix the producer gas with diesel. The Wiebe function has been a valuable tool for assessing the efficiency of dual fuel internal combustion engines. This study introduces a thermodynamic model that works in parallel with the Wiebe function and calculates the emissions of the engines. This "vis-à-vis" approach takes into consideration the actual conditions inside the cylinders-as they are returned by the Wiebe function-and calculates the final thermodynamic equilibrium of the flue gases mixture. This approach aims to enhance the operation of the dual fuel internal combustion engines by identifying the optimal operating conditions and-at the same time-advance pollution control and minimize the environmental impact.

The existing situation and challenges regarding the use of plastic carrier bags in Europe.

Since day one, retailers and consumers have favoured plastic carrier bags. However, owing to the numerous environmental disadvantages, lightweight plastic carrier bags have been drawing the attention of the European Union competent authorities. Therefore, many European Union member states have taken action so as to reduce the use of plastic carrier bags. Based on the existing legislation and voluntary initiatives for the reduction of lightweight plastic carrier bags, the challenges and achieved outcomes from the implemented policy options in the various European Union member states are discussed and commented regarding the forthcoming transposition of the 'Directive 94/62/EC on packaging and packaging waste to reduce the consumption of lightweight plastic carrier bags' into the European Union member states' national law.