A compact Fourier-transform near-infrared spectrophotometer and chemometrics for characterizing a comprehensive set of seized ecstasy samples.

A comprehensive data set of ecstasy samples containing MDMA (N-methyl-3,4-methylenedioxyamphetamine) and MDA (3,4-methylenedioxyamphetamine) seized by the Brazilian Federal Police was characterized using spectral data obtained by a compact, low-cost, near-infrared Fourier-transform based spectrophotometer. Qualitative and quantitative characterization was accomplished using soft independent modeling of class analogy (SIMCA), linear discriminant analysis (LDA) classification, discriminating partial least square (PLS-DA), and regression models based on partial least square (PLS). By applying chemometric analysis, a protocol can be proposed for the in-field screening of seized ecstasy samples. The validation led to an efficiency superior to 96 % for ecstasy classification and estimating total actives, MDMA, and MDA content in the samples with a root mean square error of validation of 4.4, 4.2, and 2.7 % (m/m), respectively. The feasibility and drawbacks of the NIR technology applied to ecstasy characterization and the compromise between false positives and false negatives rate achieved by the classification models are discussed and a new approach to improve the classification robustness was proposed considering the forensic context.

Electroanalytical profiling of cocaine samples by means of an electropolymerized molecularly imprinted polymer using benzocaine as the template molecule.

The analysis of 'cutting' or additive agents in cocaine, like benzocaine (BZC), allows police analysts to identify each component of the sample, thus obtaining information like the drugs' provenience. This kind of drug profiling is of great value in tackling drug trafficking. Electropolymerized molecularly imprinted polymers (e-MIPs) on portable screen-printed carbon electrodes (SPCEs) were developed in this study for BZC determination. The MIPs' electropolymerization was performed on a carbon surface using the anaesthetic BZC as the template molecule and 3-amino-4-hydroxybenzoic acid (3,4-AHBA) as the functional monomer. The build-up of this biomimetic sensor was carefully characterized by cyclic voltammetry (CV) and optimized. Cyclic voltammetric investigation demonstrated that BZC oxidation had a complex and pH-dependent mechanism, but at pH 7.4 a single, well-defined oxidation feature was observed. The BZC-MIP interactions were studied by computer-aided theoretical modeling by means of density functional theory (DFT) calculations. The electroanalytical methodology was effectively applied to artificial urine samples; BZC molecular recognition was achieved with a low limit of detection (LOD) of 2.9 nmol L-1 employing square-wave voltammetry (SWV). The e-MIPs were then used to 'fingerprint' genuine cocaine samples, assisted by principal component analysis (PCA), at the central forensic laboratory of the Brazilian Federal Police (BFP) with a portable potentiostat. This electroanalysis provided proof-of-concept that the drugs could be voltammetrically 'fingerprinted' using e-MIPs supported by chemometric analysis.

An optical sensor for the detection and quantification of lidocaine in cocaine samples.

An optical sensor (OS) was synthesized by mixing 10,12-pentacosadiinoic acid (PDA) with a triblock copolymer for use in the detection/quantification of lidocaine (LD) in seized cocaine hydrochloride (seized CH) samples. In the presence of LD, the OS presented a chromatic transition from blue to red, while no chromatic transition was observed for other typical cocaine adulterants or cocaine hydrochloride. Isothermal titration calorimetry analysis revealed specific interactions between the PDA molecules of the OS and the LD molecules, with these interactions being enthalpically favorable (-1.20 to -36.7 kJ mol-1). Therefore, the OS color change only occurred when LD was present in the sample, making the OS selective for LD. Consequently, LD was successfully detected in seized CH samples, irrespective of the type of adulteration. The OS was used for the quantification of LD in seized CH samples containing different adulterants, providing a linear range of 0.0959 to 0.225% (w/w), a precision of 7.2%, an accuracy ranging from -10 to 10%, and limits of detection and quantification of 0.0110% (w/w) and 0.0334% (w/w), respectively.

Evaluation of a low-cost portable near-infrared spectrophotometer for in situ cocaine profiling.

The potential of a low-cost (∼US$ 1000) portable near-infrared (NIR) spectrophotometer for in situ characterization of seized cocaine samples was evaluated. A set of 240 samples of cocaine seized in several regions and cities across Brazil by its federal police was employed in this study. These samples were previously analyzed by chromatography at the Forensic Chemistry Laboratory of the National Institute of Criminalistics in Brasília-DF for the contents of several constituents to chemically characterize the samples. A low-cost NanoNIR spectrophotometer (Texas instruments) was used to acquire the NIR spectra of the samples in the range 900-1700 nm. The spectra set was treated by the second derivative to construct and validate multivariate regression (Partial Least Square - PLS) and classification (software independent modeling of class analogy - SIMCA) models aiming to characterize the samples. Consequently, an informative toll for objective decision making could be used by the police agents to produce immediate answers to forensic questions raised at the point of seizing. Among those questions the most relevant are: does the seized sample contain cocaine? what is the cocaine form? what is its content? is the sample adulterated and/or diluted? what is the content of adulterant? is the sample significantly adulterated and/or diluted? what is the degree of oxidation of the cocaine? The results of this work allow to propose a NIR/chemometrics based analytical protocol providing fast answers to these questions with satisfactory confidence level for the purpose of reliably screen the seized samples.

Cocaine and adulterants analysis in seized drug samples by infrared spectroscopy and MCR-ALS.

Cocaine use has been reported for more than 2500 years, but along this period of time its damage to society in general became evident. Nowadays, cocaine is classified as an illicit drug and studies which give support to drug enforcement institutions, particularly in the area of police intelligence, are very relevant. Often, trafficked cocaine is not traded in its pure form, but mixed with adulterants and diluents. In the analysis of seized samples, the reference method is based on gas chromatography, however the interest in the use of vibrational spectroscopy has increased. This work aims at developing a method for determination of the concentrations of cocaine, adulterants and diluents in cocaine samples employing Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) associated with Multivariate Curve Resolution with Alternating Least-Squares (MCR-ALS). A total of 6 adulterants, 3 diluents, 2 forms of cocaine (base and hydrochloride) were determined and the method developed based on 55 synthetic mixtures prepared according to a mixture design and 20 seized samples. For validation purposes 708 seized samples and 9 synthetic mixtures were analyzed. The results proved to be satisfactory, showing that the proposed method has a great potential in the classification of the chemical form of cocaine, identification of adulterants, diluents and cocaine in seized samples, as well as providing an estimate for their concentration.

Screening of seized cocaine samples using electrophoresis microchips with integrated contactless conductivity detection.

This study describes the development of a new analytical method for the separation and detection of cocaine (COC) and its adulterants, or cutting agents, using microchip electrophoresis (ME) devices coupled with capacitively coupled contactless conductivity detection (C4 D). All the experiments were carried out using a glass commercial ME device containing two pairs of integrated sensing electrodes. The running buffer composed of 20 mmol/L amino-2-(hydroxymethyl) propane-1,3-diol and 10 mmol/L 3,4-dimethoxycinnamic acid provided the best separation conditions for COC and its adulterants with baseline resolution (R > 1.6), separation efficiencies ranging from (2.9 ± 0.1) to (3.2 ± 0.2) × 105 plates/m, and estimated LOD values between 40 and 150 µmol/L. The quantification of COC was successfully performed in four samples seized by the Brazilian Federal Police Department and all predicted values agree with values estimated by the reference method. Some other interfering species were detected in the seized samples during the screening procedure on ME-C4 D devices. While lidocaine was detected in sample 3, the presence of levamisole was observed in samples 2 and 4. However, their concentrations were estimated to be below the LOQ. ME-C4 D devices have proved to be quite efficient for the identification and quantification of COC with errors lower than 10% when compared to the data obtained by a reference method. The approach herein reported offers great potential to be used for on-site COC screening in seized samples.

Classification of Brazilian and foreign gasolines adulterated with alcohol using infrared spectroscopy.

The smuggling of products across the border regions of many countries is a practice to be fought. Brazilian authorities are increasingly worried about the illicit trade of fuels along the frontiers of the country. In order to confirm this as a crime, the Federal Police must have a means of identifying the origin of the fuel. This work describes the development of a rapid and nondestructive methodology to classify gasoline as to its origin (Brazil, Venezuela and Peru), using infrared spectroscopy and multivariate classification. Partial Least Squares Discriminant Analysis (PLS-DA) and Soft Independent Modeling Class Analogy (SIMCA) models were built. Direct standardization (DS) was employed aiming to standardize the spectra obtained in different laboratories of the border units of the Federal Police. Two approaches were considered in this work: (1) local and (2) global classification models. When using Approach 1, the PLS-DA achieved 100% correct classification, and the deviation of the predicted values for the secondary instrument considerably decreased after performing DS. In this case, SIMCA models were not efficient in the classification, even after standardization. Using a global model (Approach 2), both PLS-DA and SIMCA techniques were effective after performing DS. Considering that real situations may involve questioned samples from other nations (such as Peru), the SIMCA method developed according to Approach 2 is a more adequate, since the sample will be classified neither as Brazil nor Venezuelan. This methodology could be applied to other forensic problems involving the chemical classification of a product, provided that a specific modeling is performed.

Brazilian Federal Police drug chemical profiling - the PeQui project.

Over the past six years the Brazilian Federal Police has undertaken major efforts in order to implement and to develop its own drug chemical profiling program. This paper aims to provide a broad perspective regarding the managerial strategies and some examples of subsequent technical issues involved in the implementation of such a project. Close collaboration with local drug enforcement and investigation teams, establishment of proper worldwide partnerships with well recognized institutions in the field of drug analysis and the attainment of suitable funding and human resources are shown to be key success factors. Some preliminary results concerning the chemical profile of cocaine seizures in Brazil during this process are presented.

Correlation of cocaine hydrochloride samples seized in Brazil based on determination of residual solvents: an innovative chemometric method for determination of linkage thresholds.

Cocaine sample correlation provides important information in the identification of traffic networks. However, available methods for estimating if samples are linked or not require the use of previous police investigation and forensic expert knowledge regarding the number of classes and provide thresholds that are both static and data set specific. In this paper, a novel unsupervised linkage threshold method (ULT) based on chemometric analysis is described and applied to the analysis of headspace gas chromatography mass spectrometry (HS-GC/MS) data of more than 250 real cocaine hydrochloride samples seized by Brazilian Federal Police. The method is capable of establishing linkage thresholds that do not require any prior information about the number of classes or distribution of the samples and can be dynamically updated as the data set changes. It is envisaged that the ULT method may also be applied to other forensic expertise areas where limited population knowledge is available and data sets are continually modified with the inflow of new information.

LSD and 9,10-dihydro-LSD analyses in street drug blotter samples via easy ambient sonic-spray ionization mass spectrometry (EASI-MS).

Normally, the identification of the LSD drug is performed by forensic laboratories, using the Ehrlich spot test. However, this is a nonspecific analysis. Additionally, the Brazilian Federal Police has identified the presence of a new compound in seized blotters: 9,10-dihydro-LSD, an uncontrolled substance. In this work, easy ambient sonic-spray ionization mass spectrometry in the positive ion mode, EASI(+)-MS, was used to characterize LSD and 9,10-dihydro-LSD compositions directly from the surface of blotters. The presence of LSD in the seized blotter samples were also confirmed via high-performance liquid chromatography with ultraviolet detector. In a set of 41 blotters analyzed by EASI(+)-MS, 28 showed positive results for LSD, seven for 9,10-dihydro-LSD, and another six samples showed negative results for both LSD and 9,10-dihydro-LSD. The combination of thin layer chromatography with EASI-MS also demonstrated to be a relatively simple and powerful screening tool for forensic analysis of street drugs.

Demystifying "oxi" cocaine: Chemical profiling analysis of a "new Brazilian drug" from Acre State.

Recent information from various sources suggests that a new illicit drug, called "oxi", is being spread across Brazil. It would be used in the smoked form and it would look like to crack cocaine: usually small yellowish or light brown stones. As fully released in the media, "oxi" would differ from crack cocaine in the sense that crack would contain carbonate or bicarbonate salts whereas "oxi" would include the addition of calcium oxide and kerosene (or gasoline). In this context, this work presents a chemical profiling comparative study between "oxi" street samples seized by the Civil Police of the State of Acre (CP/AC) and samples associated with both international and interstate drug trafficking seized by the Brazilian Federal Police in Acre (FP/AC). The outcome of this work assisted Brazilian authorities to stop inaccurate and alarmist releases on this issue. It may be of good use by the forensic community in order to better understand matters in their efforts to guide local law enforcement agencies in case such claims reach the international illicit market.

Instantaneous chemical profiles of banknotes by ambient mass spectrometry.

Using two desorption/ionization techniques (DESI and EASI) and Brazilian real, US$ dollar, and euro bills as proof-of-principle techniques and samples, direct analysis by ambient mass spectrometry is shown to function as an instantaneous, reproducible, and non-destructive method for chemical analysis of banknotes. Characteristic chemical profiles were observed for the authentic bills and for the counterfeit bills made using different printing processes (inkjet, laserjet, phaser and off-set printers). Detection of real-world counterfeit bills and identification of the counterfeiting method has also been demonstrated. Chemically selective 2D imaging of banknotes has also been used to confirm counterfeiting. The nature of some key diagnostic ions has also been investigated via high accuracy FTMS measurements. The general applicability of ambient MS analysis for anti-counterfeiting strategies particularly via the use of "invisible ink" markers is discussed.

Fingerprinting and aging of ink by easy ambient sonic-spray ionization mass spectrometry.

Using easy ambient sonic-spray ionization mass spectrometry (EASI-MS), fast and non-destructive fingerprinting identification and aging of ballpoint pen ink writings have been performed directly from paper surfaces under ordinary ambient conditions. EASI-MS data obtained directly from the ink lines showed that pens from different brands provide typical ink chemical profiles. Accelerated ink aging has also been monitored by EASI-MS revealing contrasting degradation behaviors for six different common ink dyes. As demonstrated for Basic Violet 3, some dyes display a cascade of degradation products whose abundances increase linearly with time thus functioning as 'chemical clocks' for ink aging. Analysis of questionable documents has confirmed the ink aging capabilities of EASI-MS. The order of superimposition at a crossing point has also been determined by EASI-MS. For two superimposed ink lines, continuous EASI-MS analysis has also shown that the EASI spray is able to penetrate through the layers and therefore both ink layers could be characterized.