Modified MAX Phase Synthesis for Environmentally Stable and Highly Conductive Ti3C2 MXene.

One of the primary factors limiting further research and commercial use of the two-dimensional (2D) titanium carbide MXene Ti3C2, as well as MXenes in general, is the rate at which freshly made samples oxidize and degrade when stored as aqueous suspensions. Here, we show that including excess aluminum during synthesis of the Ti3AlC2 MAX phase precursor leads to Ti3AlC2 grains with improved crystallinity and carbon stoichiometry (termed Al-Ti3AlC2). MXene nanosheets (Al-Ti3C2) produced from this precursor are of higher quality, as evidenced by their increased resistance to oxidation and an increase in their electronic conductivity up to 20 000 S/cm. Aqueous suspensions of stoichiometric single- to few-layer Al-Ti3C2 flakes produced from the modified Al-Ti3AlC2 have a shelf life of over ten months, compared to 1 to 2 weeks for previously published Ti3C2, even when stored in ambient conditions. Freestanding films made from Al-Ti3C2 suspensions stored for ten months show minimal decreases in electrical conductivity and negligible oxidation. Furthermore, oxidation of the improved Al-Ti3C2 in air initiates at temperatures that are 100-150 °C higher than that of conventional Ti3C2. The observed improvements in both the shelf life and properties of Al-Ti3C2 will facilitate the widespread use of this material.

Tailoring Electronic and Optical Properties of MXenes through Forming Solid Solutions.

Alloying is a long-established strategy to tailor properties of metals for specific applications, thus retaining or enhancing the principal elemental characteristics while offering additional functionality from the added elements. We propose a similar approach to the control of properties of two-dimensional transition metal carbides known as MXenes. MXenes (Mn+1Xn) have two sites for compositional variation: elemental substitution on both the metal (M) and carbon/nitrogen (X) sites presents promising routes for tailoring the chemical, optical, electronic, or mechanical properties of MXenes. Herein, we systematically investigated three interrelated binary solid-solution MXene systems based on Ti, Nb, and/or V at the M-site in a M2XTx structure (Ti2-yNbyCTx, Ti2-yVyCTx, and V2-yNbyCTx, where Tx stands for surface terminations) showing the evolution of electronic and optical properties as a function of composition. All three MXene systems show unlimited solubility and random distribution of metal elements in the metal sublattice. Optically, the MXene systems are tailorable in a nonlinear fashion, with absorption peaks from ultraviolet to near-infrared wavelength. The macroscopic electrical conductivity of solid solution MXenes can be controllably varied over 3 orders of magnitude at room temperature and 6 orders of magnitude from 10 to 300 K. This work greatly increases the number of nonstoichiometric MXenes reported to date and opens avenues for controlling physical properties of different MXenes with a limitless number of compositions possible through M-site solid solutions.

Tunable electrochromic behavior of titanium-based MXenes.

Two-dimensional transition metal carbides, nitrides and carbonitrides, popular by the name MXenes, are a promising class of materials as they exhibit intriguing optical, optoelectronic and electrochemical properties. Taking advantage of their metallic conductivity and hydrophilicity, titanium carbide MXenes (Ti3C2Tx and others) are used to fabricate solution processable transparent conducting electrodes (TCEs) for the design of three-electrode electrochromic cells. However, the tunable electrochromic behavior of various titanium-based MXene compositions across the entire visible spectrum has not yet been demonstrated. Here, we investigate the intrinsic electrochromic properties of titanium-based MXenes, Ti3C2Tx, Ti3CNTx, Ti2CTx, and Ti1.6Nb0.4CTx, where individual MXenes serve as a transparent conducting, electrochromic, and plasmonic material layer. Plasmonic extinction bands for Ti3C2Tx, Ti2CTx and Ti1.6Nb0.4CTx are centered at 800, 550 and 480 nm, which are electrochemically tunable to 630, 470 and 410 nm, respectively, whereas Ti3CNTx shows a reversible change in transmittance in the wide visible range. Additionally, the switching rates of MXene electrodes with no additional transparent conductor electrodes are estimated and correlated with the respective electrical figure of merit values. This study demonstrates that MXene-based electrochromic cells are tunable in the entire visible spectrum and suggests the potential of the MXene family of materials in optoelectronic, plasmonic, and photonic applications, such as tunable visible optical filters and modulators, to name a few.

A 2D Titanium Carbide MXene Flexible Electrode for High-Efficiency Light-Emitting Diodes.

Although several transparent conducting materials such as carbon nanotubes, graphene, and conducting polymers have been intensively explored as flexible electrodes in optoelectronic devices, their insufficient electrical conductivity, low work function, and complicated electrode fabrication processes have limited their practical use. Herein, a 2D titanium carbide (Ti3 C2 ) MXene film with transparent conducting electrode (TCE) properties, including high electrical conductivity (≈11 670 S cm-1 ) and high work function (≈5.1 eV), which are achieved by combining a simple solution processing with modulation of surface composition, is described. A chemical neutralization strategy of a conducting-polymer hole-injection layer is used to prevent detrimental surface oxidation and resulting degradation of the electrode film. Use of the MXene electrode in an organic light-emitting diode leads to a current efficiency of ≈102.0 cd A-1 and an external quantum efficiency of ≈28.5% ph/el, which agree well with the theoretical maximum values from optical simulations. The results demonstrate the strong potential of MXene as a solution-processable electrode in optoelectronic devices and provide a guideline for use of MXenes as TCEs in low-cost flexible optoelectronic devices.

Fabrication of Ti3C2 MXene Microelectrode Arrays for In Vivo Neural Recording.

Implantable microelectrode technologies have been widely used to elucidate neural dynamics at the microscale to gain a deeper understanding of the neural underpinnings of brain disease and injury. As electrodes are miniaturized to the scale of individual cells, a corresponding rise in the interface impedance limits the quality of recorded signals. Additionally, conventional electrode materials are stiff, resulting in a significant mechanical mismatch between the electrode and the surrounding brain tissue, which elicits an inflammatory response that eventually leads to a degradation of the device performance. To address these challenges, we have developed a process to fabricate flexible microelectrodes based on Ti3C2 MXene, a recently discovered nanomaterial that possesses remarkably high volumetric capacitance, electrical conductivity, surface functionality, and processability in aqueous dispersions. Flexible arrays of Ti3C2 MXene microelectrodes have remarkably low impedance due to the high conductivity and high specific surface area of the Ti3C2 MXene films, and they have proven to be exquisitely sensitive for recording neuronal activity. In this protocol, we describe a novel method for micropatterning Ti3C2 MXene into microelectrode arrays on flexible polymeric substrates and outline their use for in vivo micro-electrocorticography recording. This method can easily be extended to create MXene electrode arrays of arbitrary size or geometry for a range of other applications in bioelectronics and it can also be adapted for use with other conductive inks besides Ti3C2 MXene. This protocol enables simple and scalable fabrication of microelectrodes from solution-based conductive inks, and specifically allows harnessing the unique properties of hydrophilic Ti3C2 MXene to overcome many of the barriers that have long hindered the widespread adoption of carbon-based nanomaterials for high-fidelity neural microelectrodes.

Ti3C2Tx MXene-Reduced Graphene Oxide Composite Electrodes for Stretchable Supercapacitors.

The development of stretchable electronics requires the invention of compatible high-performance power sources, such as stretchable supercapacitors and batteries. In this work, two-dimensional (2D) titanium carbide (Ti3C2Tx) MXene is being explored for flexible and printed energy storage devices by fabrication of a robust, stretchable high-performance supercapacitor with reduced graphene oxide (RGO) to create a composite electrode. The Ti3C2Tx/RGO composite electrode combines the superior electrochemical and mechanical properties of Ti3C2Tx and the mechanical robustness of RGO resulting from strong nanosheet interactions, larger nanoflake size, and mechanical flexibility. It is found that the Ti3C2Tx/RGO composite electrodes with 50 wt % RGO incorporated prove to mitigate cracks generated under large strains. The composite electrodes exhibit a large capacitance of 49 mF/cm2 (∼490 F/cm3 and ∼140 F/g) and good electrochemical and mechanical stability when subjected to cyclic uniaxial (300%) or biaxial (200% × 200%) strains. The as-assembled symmetric supercapacitor demonstrates a specific capacitance of 18.6 mF/cm2 (∼90 F/cm3 and ∼29 F/g) and a stretchability of up to 300%. The developed approach offers an alternative strategy to fabricate stretchable MXene-based energy storage devices and can be extended to other members of the large MXene family.

A gel-free Ti3C2Tx-based electrode array for high-density, high-resolution surface electromyography.

Wearable sensors for surface electromyography (EMG) are composed of single- to few-channel large-area contacts, which exhibit high interfacial impedance and require conductive gels or adhesives to record high-fidelity signals. These devices are also limited in their ability to record activation across large muscle groups due to poor spatial coverage. To address these challenges, we have developed a novel high-density EMG array based on titanium carbide (Ti3C2Tx) MXene encapsulated in parylene-C. Ti3C2Tx is a two-dimensional nanomaterial with excellent electrical, electrochemical, and mechanical properties, which forms colloidally stable aqueous dispersions, enabling safe, scalable solutions-processing. Leveraging the excellent combination of metallic conductivity, high pseudocapacitance, and ease of processability of Ti3C2Tx MXene, we demonstrate the fabrication of gel-free, high-density EMG arrays which are ~8 µm thick, feature 16 recording channels, and are highly skin-conformable. The impedance of Ti3C2Tx electrodes in contact with human skin is 100-1000x lower than the impedance of commercially-available electrodes which require conductive gels to be effective. Furthermore, our arrays can record high-fidelity, low-noise EMG, and can resolve muscle activation with improved spatiotemporal resolution and sensitivity compared to conventional gelled electrodes. Overall, our results establish Ti3C2Tx-based bioelectronic interfaces as a powerful platform technology for high-resolution, non-invasive wearable sensing technologies.

Synthesis of Mo4VAlC4 MAX Phase and Two-Dimensional Mo4VC4 MXene with Five Atomic Layers of Transition Metals.

MXenes are a family of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides with a general formula of Mn+1XnTx, in which two, three, or four atomic layers of a transition metal (M: Ti, Nb, V, Cr, Mo, Ta, etc.) are interleaved with layers of C and/or N (shown as X), and Tx represents surface termination groups such as -OH, ═O, and -F. Here, we report the scalable synthesis and characterization of a MXene with five atomic layers of transition metals (Mo4VC4Tx), by synthesizing its Mo4VAlC4 MAX phase precursor that contains no other MAX phase impurities. These phases display twinning at their central M layers which is not present in any other known MAX phases or MXenes. Transmission electron microscopy and X-ray diffraction were used to examine the structure of both phases. Energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and high-resolution scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy were used to study the composition of these materials. Density functional theory calculations indicate that other five transition metal-layer MAX phases (M'4M″AlC4) may be possible, where M' and M″ are two different transition metals. The predicted existence of additional Al-containing MAX phases suggests that more M5C4Tx MXenes can be synthesized. Additionally, we characterized the optical, electronic, and thermal properties of Mo4VC4Tx. This study demonstrates the existence of an additional subfamily of M5X4Tx MXenes as well as a twinned structure, allowing for a wider range of 2D structures and compositions for more control over properties, which could lead to many different applications.

Sculpting Liquids with Two-Dimensional Materials: The Assembly of Ti3C2Tx MXene Sheets at Liquid-Liquid Interfaces.

The self-assembly of nanoscale materials at the liquid-liquid interface allows for fabrication of three-dimensionally structured liquids with nearly arbitrary geometries and tailored electronic, optical, and magnetic properties. Two-dimensional (2D) materials are highly anisotropic, with thicknesses on the order of a nanometer and lateral dimensions upward of hundreds of nanometers to micrometers. Controlling the assembly of these materials has direct implications for their properties and performance. We here describe the interfacial assembly and jamming of Ti3C2Tx MXene nanosheets at the oil-water interface. Planar, as well as complex, programmed three-dimensional all-liquid objects are realized. Our approach presents potential for the creation of all-liquid 3D-printed devices for possible applications in all-liquid electrochemical and energy storage devices and electrically active, all-liquid fluidics that exploits the versatile structure, functionality, and reconfigurability of liquids.

Mechanically strong and electrically conductive multilayer MXene nanocomposites.

Polymer nanocomposites offer the opportunity to bridge properties of nanomaterials to the macroscale. In this work, layer-by-layer (LbL) assembly is used to demonstrate nanocomposites of 2D titanium carbide nanosheets (MXene) and clay nanoplatelets (montmorillonite) to fabricate freestanding thin films with unique multifunctional properties. These thin films can be tuned by adjusting the thickness to exhibit a tensile strength of 138 MPa-225 MPa, EMI specific shielding effectiveness normalized to thickness and density up to 24 550 dB cm2 g-1, and sheet resistance from 855 Ω sq-1-3.27 kΩ sq-1 (corresponding to a range of conductivity from 53 S m-1 to 125 S m-1). This composite is the strongest MXene-based LbL film prepared to date, in part due to the nacre-like brick-and-mortar structure. Ultra-strong, multifunctional films of this nature are desirable for many applications ranging from membranes, to structural and multifunctional composites, energy harvesting and storage, and materials for aerospace.

Interfacial Assembly of Ultrathin, Functional MXene Films.

MXenes are a prominent family of two-dimensional materials because of their metallic conductivity and abundant surface functionalities. Although MXenes have been extensively studied as bulk particles or free-standing films, thin and transparent films are needed for optical, optoelectronic, sensing, and other applications. In this study, we demonstrate a facile method to fabricate ultrathin (∼10 nm), Ti3C2Tx MXene films by an interfacial assembly technique. The self-assembling behavior of MXene flakes resulted in films with a high stacking order and strong plane-to-plane adherence, where optimal films of 10 nm thickness displayed a low sheet resistance of 310 Ω/□. By using surface tension, films were transferred onto various types of planar and curved substrates. Moreover, multiple films were consecutively transferred onto substrates from a single batch of solution, showing the efficient use of the material. When the films were utilized as gas sensing channels, a high signal-to-noise ratio, up to 320, was observed, where the gas response of films assembled from small MXene flakes was 10 times larger than that from large flakes. This work provides a facile and efficient method to allow MXenes to be further exploited for thin-film applications.

Two-Dimensional Arrays of Transition Metal Nitride Nanocrystals.

The synthesis of low-dimensional transition metal nitride (TMN) nanomaterials is developing rapidly, as their fundamental properties, such as high electrical conductivity, lead to many important applications. However, TMN nanostructures synthesized by traditional strategies do not allow for maximum conductivity and accessibility of active sites simultaneously, which is a crucial factor for many applications in plasmonics, energy storage, sensing, and so on. Unique interconnected two-dimensional (2D) arrays of few-nanometer TMN nanocrystals not only having electronic conductivity in-plane, but also allowing transport of ions and electrolyte through the porous nanosheets, which are obtained by topochemical synthesis on the surface of a salt template, are reported. As a demonstration of their application in a lithium-sulfur battery, it is shown that 2D arrays of several nitrides can achieve a high initial capacity of >1000 mAh g-1 at 0.2 C and only about 13% degradation over 1000 cycles at 1 C under a high areal sulfur loading (>5 mg cm-2 ).

Enhanced Selectivity of MXene Gas Sensors through Metal Ion Intercalation: In Situ X-ray Diffraction Study.

Gas molecules are known to interact with two-dimensional (2D) materials through surface adsorption where the adsorption-induced charge transfer governs the chemiresistive sensing of various gases. Recently, titanium carbide (Ti3C2T x) MXene emerged as a promising sensing channel showing the highest sensitivity among 2D materials and unique gas selectivity. However, unlike conventional 2D materials, MXenes show metallic conductivity and contain interlayer water, implying that gas molecules will likely interact in a more complex way than the typical charge transfer model. Therefore, it is important to understand the role of all factors that may influence gas sensing. Here, we studied the gas-induced interlayer swelling of Ti3C2T x MXene thin films and its influence on gas sensing performance. In situ X-ray diffraction was employed to simultaneously measure dynamic swelling behavior where Ti3C2T x MXene films displayed selective swelling toward ethanol vapor over CO2 gas. Results show that the controlling sodium ion concentration in the interlayers is highly important in tuning the swelling behavior and gas sensing performance. The degree of swelling matched well with the gas response intensity, and the highest gas selectivity toward ethanol vapor was achieved for Ti3C2T x sensing channels treated with 0.3 mM NaOH, which also displayed the largest amount of swelling. Our results demonstrate that controlling the interlayer transport of Ti3C2T x MXene is essential for enhancing the selective sensing of gas molecules.

An investigation into the factors governing the oxidation of two-dimensional Ti3C2 MXene.

Two-dimensional (2D) transition metal carbides (MXenes) exhibit outstanding performances in many applications, such as energy storage, optoelectronics, and electrocatalysts. However, colloidal solutions of Ti3C2Tx MXene flakes deteriorate rapidly under ambient conditions due to the conversion of the titanium carbide to titanium dioxide. Here, we discuss the dominant factors influencing the rate of oxidation of Ti3C2Tx MXene flakes, and present guidelines for their storage with the aim of maintaining the intrinsic properties of the as-prepared material. The oxidation stability of the Ti3C2Tx flakes is dramatically improved in a system where water molecules and temperature were well-controlled. It was found that aqueous solutions of Ti3C2Tx MXene can be chemically stable for more than 39 weeks when the storage temperature (-80 °C) is sufficiently low to cease the oxidation processes. It was also found that if the Ti3C2Tx flakes are dispersed in ethanol, the degradation process can be significantly delayed even at 5 °C. Moreover, the oxidation stability of the Ti3C2Tx flakes is dramatically improved in both cases, even in the presence of oxygen-containing atmosphere. We demonstrate practical applications of our approach by employing Ti3C2Tx in a gas sensor showing that when oxidation is inhibited, the device can retain the original electrical properties after 5 weeks of storage.

Two-Dimensional Ti3C2 MXene for High-Resolution Neural Interfaces.

High-resolution neural interfaces are essential tools for studying and modulating neural circuits underlying brain function and disease. Because electrodes are miniaturized to achieve higher spatial resolution and channel count, maintaining low impedance and high signal quality becomes a significant challenge. Nanostructured materials can address this challenge because they combine high electrical conductivity with mechanical flexibility and can interact with biological systems on a molecular scale. Unfortunately, fabricating high-resolution neural interfaces from nanostructured materials is typically expensive and time-consuming and does not scale, which precludes translation beyond the benchtop. Two-dimensional (2D) Ti3C2 MXene possesses a combination of remarkably high volumetric capacitance, electrical conductivity, surface functionality, and processability in aqueous dispersions distinct among carbon-based nanomaterials. Here, we present a high-throughput microfabrication process for constructing Ti3C2 neuroelectronic devices and demonstrate their superior impedance and in vivo neural recording performance in comparison with standard metal microelectrodes. Specifically, when compared to gold microelectrodes of the same size, Ti3C2 electrodes exhibit a 4-fold reduction in interface impedance. Furthermore, intraoperative in vivo recordings from the brains of anesthetized rats at multiple spatial and temporal scales demonstrate that Ti3C2 electrodes exhibit lower baseline noise, higher signal-to-noise ratio, and reduced susceptibility to 60 Hz interference than gold electrodes. Finally, in neuronal biocompatibility studies, neurons cultured on Ti3C2 are as viable as those in control cultures, and they can adhere, grow axonal processes, and form functional networks. Overall, our results indicate that Ti3C2 MXene microelectrodes have the potential to become a powerful platform technology for high-resolution biological interfaces.

Size-Dependent Physical and Electrochemical Properties of Two-Dimensional MXene Flakes.

Two-dimensional (2D) particles, including transition metal carbides (MXenes), often exhibit large lateral-size polydispersity in delaminated colloidal solutions. This heterogeneity results in challenges when conducting fundamental studies, such as investigating correlations between properties and the 2D flake size. To resolve this challenge, we have developed solution-processable techniques to control and sort 2D titanium carbide (Ti3C2T x) MXene flakes after synthesis based on sonication and density gradient centrifugation, respectively. By tuning the sonication conditions, Ti3C2T x flakes with varied lateral sizes, ranging from 0.1 to ∼5 µm, can be obtained. Furthermore, density gradient centrifugation was used to sort Ti3C2T x flakes with different lateral sizes into more monodisperse fractions. These processing techniques allow for the characterization of size-dependent optical and electronic properties by measuring the absorption spectra and film conductivity, respectively. Additionally, by testing the material as electrochemical capacitor electrodes, we show the Ti3C2T x flake-size dependence of electrochemical performance. Ti3C2T x films made of flakes with lateral sizes of ∼1 µm showed the best capacitance of 290 F/g at 2 mV/s and rate performance with 200 F/g at 1000 mV/s. The work provides a general methodology which can be followed to control the size of MXenes  and other 2D materials for a variety of applications and fundamental size-dependent studies.

Selective Etching of Silicon from Ti3 SiC2 (MAX) To Obtain 2D Titanium Carbide (MXene).

Until now, MXenes could only be produced from MAX phases containing aluminum, such as Ti3 AlC2 . Here, we report on the synthesis of Ti3 C2 (MXene) through selective etching of silicon from titanium silicon carbide-the most common MAX phase. Liters of colloidal solutions of delaminated Ti3 SiC2 -derived MXene (0.5-1.3 mg mL-1 ) were produced and processed into flexible and electrically conductive films, which show higher oxidation resistance than MXene synthesized from Ti3 AlC2 . This new synthesis method greatly widens the range of precursors for MXene synthesis.

Rheological Characteristics of 2D Titanium Carbide (MXene) Dispersions: A Guide for Processing MXenes.

Understanding the rheological properties of two-dimensional (2D) materials in suspension is critical for the development of various solution processing and manufacturing techniques. 2D carbides and nitrides (MXenes) constitute one of the largest families of 2D materials with >20 synthesized compositions and applications already ranging from energy storage to medicine to optoelectronics. However, in spite of a report on clay-like behavior, not much is known about their rheological response. In this study, rheological behavior of single- and multilayer Ti3C2T x in aqueous dispersions was investigated. Viscous and viscoelastic properties of MXene dispersions were studied over a variety of concentrations from colloidal dispersions to high loading slurries, showing that a multilayer MXene suspension with up to 70 wt % can exhibit flowability. Processing guidelines for the fabrication of MXene films, coatings, and fibers have been established based on the rheological properties. Surprisingly, high viscosity was observed at very low concentrations for solutions of single-layer MXene flakes. Single-layer colloidal solutions were found to exhibit partial elasticity even at the lowest tested concentrations (<0.20 mg/mL) due to the presence of strong surface charge and excellent hydrophilicity of MXene, making them amenable to fabrication at dilute concentrations. Overall, the findings of this study provide fundamental insights into the rheological response of this quickly growing 2D family of materials in aqueous environments as well as offer guidelines for processing of MXenes.

Saturable Absorption in 2D Ti3 C2 MXene Thin Films for Passive Photonic Diodes.

MXenes comprise a new class of 2D transition metal carbides, nitrides, and carbonitrides that exhibit unique light-matter interactions. Recently, 2D Ti3 CNTx (Tx represents functional groups such as OH and F) was found to exhibit nonlinear saturable absorption (SA) or increased transmittance at higher light fluences, which is useful for mode locking in fiber-based femtosecond lasers. However, the fundamental origin and thickness dependence of SA behavior in MXenes remain to be understood. 2D Ti3 C2 Tx thin films of different thicknesses are fabricated using an interfacial film formation technique to systematically study their nonlinear optical properties. Using the open aperture Z-scan method, it is found that the SA behavior in Ti3 C2 Tx MXene arises from plasmon-induced increase in the ground state absorption at photon energies above the threshold for free carrier oscillations. The saturation fluence and modulation depth of Ti3 C2 Tx MXene is observed to be dependent on the film thickness. Unlike other 2D materials, Ti3 C2 Tx is found to show higher threshold for light-induced damage with up to 50% increase in nonlinear transmittance. Lastly, building on the SA behavior of Ti3 C2 Tx MXenes, a Ti3 C2 Tx MXene-based photonic diode that breaks time-reversal symmetry to achieve nonreciprocal transmission of nanosecond laser pulses is demonstrated.

Metallic Ti3C2Tx MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio.

Achieving high sensitivity in solid-state gas sensors can allow the precise detection of chemical agents. In particular, detection of volatile organic compounds (VOCs) at the parts per billion (ppb) level is critical for the early diagnosis of diseases. To obtain high sensitivity, two requirements need to be simultaneously satisfied: (i) low electrical noise and (ii) strong signal, which existing sensor materials cannot meet. Here, we demonstrate that 2D metal carbide MXenes, which possess high metallic conductivity for low noise and a fully functionalized surface for a strong signal, greatly outperform the sensitivity of conventional semiconductor channel materials. Ti3C2Tx MXene gas sensors exhibited a very low limit of detection of 50-100 ppb for VOC gases at room temperature. Also, the extremely low noise led to a signal-to-noise ratio 2 orders of magnitude higher than that of other 2D materials, surpassing the best sensors known. Our results provide insight in utilizing highly functionalized metallic sensing channels for developing highly sensitive sensors.