Pyrenoidal sequestration of cadmium impairs carbon dioxide fixation in a microalga.

Mixotrophic microorganisms are able to use organic carbon as well as inorganic carbon sources and thus, play an essential role in the biogeochemical carbon cycle. In aquatic ecosystems, the alteration of carbon dioxide (CO2 ) fixation by toxic metals such as cadmium - classified as a priority pollutant - could contribute to the unbalance of the carbon cycle. In consequence, the investigation of cadmium impact on carbon assimilation in mixotrophic microorganisms is of high interest. We exposed the mixotrophic microalga Chlamydomonas reinhardtii to cadmium in a growth medium containing both CO2 and labelled 13 C-[1,2] acetate as carbon sources. We showed that the accumulation of cadmium in the pyrenoid, where it was predominantly bound to sulphur ligands, impaired CO2 fixation to the benefit of acetate assimilation. Transmission electron microscopy (TEM)/X-ray energy dispersive spectroscopy (X-EDS) and micro X-ray fluorescence (µXRF)/micro X-ray absorption near-edge structure (µXANES) at Cd LIII- edge indicated the localization and the speciation of cadmium in the cellular structure. In addition, nanoscale secondary ion mass spectrometry (NanoSIMS) analysis of the 13 C/12 C ratio in pyrenoid and starch granules revealed the origin of carbon sources. The fraction of carbon in starch originating from CO2 decreased from 73 to 39% during cadmium stress. For the first time, the complementary use of high-resolution elemental and isotopic imaging techniques allowed relating the impact of cadmium at the subcellular level with carbon assimilation in a mixotrophic microalga.

Pb nanospheres in ancient zircon yield model ages for zircon formation and Pb mobilization.

Nanospheres of lead (Pb) have recently been identified in zircon (ZrSiO4) with the potential to compromise the veracity of U-Pb age determinations. The key assumption that the determined age is robust against the effects of Pb mobility, as long as Pb is not lost from the zircon during subsequent geological events, is now in question. To determine the effect of nanosphere formation on age determination, and whether analysis of nanospheres can yield additional information about the timing of both zircon growth and nanosphere formation, zircons from the Napier Complex in Enderby Land, East Antarctica, were investigated by high-spatial resolution NanoSIMS (Secondary Ion Mass Spectrometry) mapping. Conventional SIMS analyses with >µm resolution potentially mixes Pb from multiple nanospheres with the zircon host, yielding variable average values and therefore unreliable ages. NanoSIMS analyses were obtained of 207Pb/206Pb in nanospheres a few nanometres in diameter that were resolved from 207Pb/206Pb measurements in the zircon host. We demonstrate that analysis for 207Pb/206Pb in multiple individual Pb nanospheres, along with separate analysis of 207Pb/206Pb in the zircon host, can not only accurately yield the age of zircon crystallization, but also the time of nanosphere formation resulting from Pb mobilization during metamorphism. Model ages for both events can be derived that are correlated due to the limited range of possible solutions that can be satisfied by the measured 207Pb/206Pb ratios of nanospheres and zircon host. For the Napier Complex zircons, this yields a model age of ca 3110 Ma for zircon formation and a late Archean model age of 2610 Ma for the metamorphism that produced the nanospheres. The Nanosphere Model Age (NMA) method constrains both the crystallization age and age of the metamorphism to ~±135 Ma, a significant improvement on errors derived from counting statistics.

87Sr/86Sr isotope ratio and multielemental signatures as indicators of origin of European cured hams: The role of salt.

We have examined the potential of discriminant inorganic constituents (trace-, ultra-trace elements and Sr isotope ratios) to assess the origin of world famous brands of European dry-cured hams. The variation of the multielemental composition with principal component analysis allowed to discriminate the origin of Bayonne hams. Determined ratio 87Sr/86Sr was recognized as a strong additional distinctive parameter. The ratio 87Sr/86Sr allowed to better separate all the different categories of hams in addition to the multi-elemental detection. The major contribution of the value 87Sr/86Sr for the Bayonne ham is directly related to its curing due to the salt used in process coming from the nearby salt mine Salies-de-Béarn. Since the salt represents around 4% of the final product, it will therefore strongly influence the elemental and isotopic composition of hams. The overall discrimination potential of strontium isotope ratio is evidenced in the final statistical discrimination of the origin of hams.

A New Radio Frequency Plasma Oxygen Primary Ion Source on Nano Secondary Ion Mass Spectrometry for Improved Lateral Resolution and Detection of Electropositive Elements at Single Cell Level.

An important application field of secondary ion mass spectrometry at the nanometer scale (NanoSIMS) is the detection of chemical elements and, in particular, metals at the subcellular level in biological samples. The detection of many trace metals requires an oxygen primary ion source to allow the generation of positive secondary ions with high yield in the NanoSIMS. The duoplasmatron oxygen source is commonly used in this ion microprobe but cannot achieve the same quality of images as the cesium primary ion source used to produce negative secondary ions (C(-), CN(-), S(-), P(-)) due to a larger primary ion beam size. In this paper, a new type of an oxygen ion source using a rf plasma is fitted and characterized on a NanoSIMS50L. The performances of this primary ion source in terms of current density and achievable lateral resolution have been characterized and compared to the conventional duoplasmatron and cesium sources. The new rf plasma oxygen source offered a net improvement in terms of primary beam current density compared to the commonly used duoplasmatron source, which resulted in higher ultimate lateral resolutions down to 37 nm and which provided a 5-45 times higher apparent sensitivity for electropositive elements. Other advantages include a better long-term stability and reduced maintenance. This new rf plasma oxygen primary ion source has been applied to the localization of essential macroelements and trace metals at basal levels in two biological models, cells of Chlamydomonas reinhardtii and Arabidopsis thaliana.

Chemical bioimaging for the subcellular localization of trace elements by high contrast TEM, TEM/X-EDS, and NanoSIMS.

Chemical bioimaging offers an important contribution to the investigation of biochemical functions, biosorption and bioaccumulation processes of trace elements via their localization at the cellular and even at the subcellular level. This paper describes the combined use of high contrast transmission electron microscopy (HC-TEM), energy dispersive X-ray spectroscopy (X-EDS), and nano secondary ion mass spectrometry (NanoSIMS) applied to a model organism, the unicellular green algae Chlamydomonas reinhardtii. HC-TEM providing a lateral resolution of 1nm was used for imaging the ultrastructure of algae cells which have diameters of 5-10µm. TEM coupled to X-EDS (TEM/X-EDS) combined textural (morphology and size) analysis with detection of Ca, P, K, Mg, Fe, and Zn in selected subcellular granules using an X-EDS probe size of approx. 1µm. However, instrumental sensitivity was at the limit for trace element detection. NanoSIMS allowed chemical imaging of macro and trace elements with subcellular resolution (element mapping). Ca, Mg, and P as well as the trace elements Fe, Cu, and Zn present at basal levels were detected in pyrenoids, contractile vacuoles, and granules. Some metals were even localized in small vesicles of about 200nm size. Sensitive subcellular localization of trace metals was possible by the application of a recently developed RF plasma oxygen primary ion source on NanoSIMS which has shown good improvements in terms of lateral resolution (below 50nm), sensitivity, and stability. Furthermore correlative single cell imaging was developed combining the advantages of TEM and NanoSIMS. An advanced sample preparation protocol provided adjacent ultramicrotome sections for parallel TEM and NanoSIMS analyses of the same cell. Thus, the C. reinhardtii cellular ultrastructure could be directly related to the spatial distribution of metals in different cell organelles such as vacuoles and chloroplast.

On-line double isotope dilution laser ablation inductively coupled plasma mass spectrometry for the quantitative analysis of solid materials.

We report on the determination of trace elements in solid samples by the combination of on-line double isotope dilution and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The proposed method requires the sequential analysis of the sample and a certified natural abundance standard by on-line IDMS using the same isotopically-enriched spike solution. In this way, the mass fraction of the analyte in the sample can be directly referred to the certified standard so the previous characterization of the spike solution is not required. To validate the procedure, Sr, Rb and Pb were determined in certified reference materials with different matrices, including silicate glasses (SRM 610, 612 and 614) and powdered samples (PACS-2, SRM 2710a, SRM 1944, SRM 2702 and SRM 2780). The analysis of powdered samples was carried out both by the preparation of pressed pellets and by lithium borate fusion. Experimental results for the analysis of powdered samples were in agreement with the certified values for all materials. Relative standard deviations in the range of 6-21% for pressed pellets and 3-21% for fused solids were obtained from n=3 independent measurements. Minimal sample preparation, data treatment and consumption of the isotopically-enriched isotopes are the main advantages of the method over previously reported approaches.

Isotope dilution mass spectrometry for quantitative elemental analysis of powdered samples by radiofrequency pulsed glow discharge time of flight mass spectrometry.

In recent years particular effort is being devoted to the development of pulsed glow discharges (PGDs) for mass spectrometry because this powering operation mode could offer important ionization analytical advantages. However, the capabilities of radiofrequency (RF) PGD coupled to a time of flight mass spectrometry (ToFMS) for accurate isotope ratio measurements have not been demonstrated yet. This work is focused on investigating different time positions along the pulse profile for the accurate measurement of isotope ratios. As a result, a method has been developed for the direct and simultaneous multielement determination of trace elements in powdered geological samples by RF-PGD-ToFMS in combination with isotope dilution mass spectrometry (IDMS) as an absolute measurement method directly traceable to the International System of Units. Optimized operating conditions were 70 W of applied radiofrequency power, 250 Pa of pressure, 2 ms of pulse width and 4 ms of pulse period, being argon the plasma gas used. To homogeneously distribute the added isotopically-enriched standards, lithium borate fusion of powdered solid samples was used as sample preparation approach. In this way, Cu, Zn, Ba and Pb were successfully determined by RF-PGD-ToF(IDMS) in two NIST Standard Reference Materials (SRM 2586 and SRM 2780) representing two different matrices of geological interest (soil and rock samples). Cu, Zn, Ba and Pb concentrations determined by RF-PGD-ToF(IDMS) were well in agreement with the certified values at 95% confidence interval and precisions below 12% relative standard deviation were observed for three independent analyses. Elemental concentrations investigated were in the range of 81-5770 mg/kg, demonstrating the potential of RF-PGD-ToF(IDMS) for a sensitive, accurate and robust analysis of powdered samples.

Elemental analyses of soil and sediment fused with lithium borate using isotope dilution laser ablation-inductively coupled plasma-mass spectrometry.

Quantitative analysis using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) remains challenging primarily due to the lack of appropriate reference materials available for the wide variety of samples of interest and to elemental fractionation effects. Isotopic dilution mass spectrometry (IDMS) is becoming the methodology of choice to address these issues because the different isotopes of an element represent near-perfect internal standards. In this work, we investigated the lithium borate fusion of powdered solid samples, including soils, sediments, rock mine waste and a meteorite, as a strategy to homogenously distribute, i.e. equilibrate the elements and the added isotopically enriched standards. A comparison of this methodology using two pulsed laser ablation systems (ArF* excimer and Nd:YAG) with different wavelengths as well as two ICP-MS instruments (quadrupole and double-focusing sector field) was performed. Emphasis was put on using standard equipment to show the potential of the proposed strategy for its application in routine laboratories. Cr, Zn, Ba, Sr and Pb were successfully determined by LA-ICP-IDMS in six Standard Reference Materials (SRMs) representing different matrices of environmental interest. Experimental results showed the SRM fused glasses exhibited a low level of heterogeneity (intra- and inter-sample) for both natural abundance and isotopically enriched samples (RSD <3%, n=3, 1σ). A good agreement between experimental results and the certified values was also observed.

Standard addition method for laser ablation ICPMS using a spinning platform.

A method has been developed for the fast and easy determination of Pb, Sr, Ba, Ni, Cu, and Zn, which are of geological and environmental interest, in solid samples by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) using a spinning sample platform. The platform, containing a sample and a standard, is spun during the ablation, allowing the quasi-simultaneous ablation of both materials. The aerosols resulting from the ablation of sample and standard were mixed in the ablation cell allowing quantification of analytes by standard additions. The proportion of standard versus sample of the mixing can be increased by performing the ablation further from the axis of rotation. The ablated masses have been determined using a new strategy based on isotope dilution analysis. This spinning laser ablation method has been applied to the Allende meteorite and four powdered standard reference materials (SRMs) fused in lithium borate glasses: two sediments as well as a soil and a rock material. SRM 612 (Trace Elements in Glass) was also analyzed despite having a matrix slightly different from the glass standard obtained by lithium borate fusion. The deviation from the certified values was found to be less than 15% for most of the mass fractions for all the elements and samples studied, with an average precision of 10%. These results demonstrate the validity of the proposed method for the direct and fast analysis of solid samples of different matrixes by standard additions, using a single standard sample.

Putting a spin on LA-ICP-MS analysis combined to isotope dilution.

The determination of Zn, Sr, Ba, and Pb in solid samples has been achieved by laser ablation inductively coupled plasma isotope dilution mass spectrometry using a spinning platform. The fast rotation of a sample and an isotopically enriched spike placed close together on a sample holder allowed performing the isotope dilution directly inside the ablation cell. The proportion of spike versus sample of the aerosol mixture obtained has been determined online by isotope dilution in order to correct for differences in ablation rate although both materials were placed on the axis of rotation of the motor. Homogeneous, time-stable, and reusable samples were prepared by lithium borate fusion. A unique isotopically enriched spike glass was used to analyze four Standard Reference Materials of different matrix (after a simple polishing): two sediments Standard Reference Material (SRM) 1944 and SRM 2702 and two soils SRM 2586 and SRM 2711a. The proposed method yielded mass fractions with a deviation from the certified value usually lower than 12% and a precision of less than 9% RSD (except for Zn in SRM 2586 and 2711a). Although direct spiking of the solid before fusion could presumably provide better isotopic mixing, the presented methodology allows the reuse of the spike glass (thus, decreasing drastically the cost of the analysis) and is relatively faster because the spike does not need to be weighted, added, and evaporated each time. These results demonstrate the potential of this newly developed method for fast analysis of solid samples using isotope dilution at a low cost.

Fast and accurate procedure for the determination of Cr(VI) in solid samples by isotope dilution mass spectrometry.

We present here a new environmental measurement method for the rapid extraction and accurate quantification of Cr(VI) in solid samples. The quantitative extraction of Cr(VI) is achieved in 10 minutes by means of focused microwave assisted extraction using 50 mmol/L Ethylendiamintetraacetic acid (EDTA) at pH 10 as extractant. In addition, it enables the separation of Cr species by anion exchange chromatography using a mobile phase which is a 1:10 dilution of the extracting solution. Thus, neutralization or acidification steps which are prone to cause interconversion of Cr species are not needed. Another benefit of using EDTA is that it allows to measure Cr(III)-EDTA complex and Cr(VI) simultaneously in an alkaline extraction solution. The application of a 10 minutes focused microwave assisted extraction (5 min at 90 °C plus 5 min at 110 °C) has been shown to quantitatively extract all forms of hexavalent chromium from the standard reference materials (SRM) candidate NIST 2700 and NIST 2701. A double spike isotope dilution mass spectrometry (IDMS) procedure was employed to study chromium interconversion reactions. It was observed that the formation of a Cr(III)-EDTA complex avoided Cr(III) oxidation for these two reference materials. Thus, the use of a double spiking strategy for quantification is not required and a single spike IDMS procedure using isotopically enriched Cr(VI) provided accurate results.

Evaluation of hexavalent chromium extraction method EPA method 3060A for soils using XANES spectroscopy.

Hexavalent chromium (Cr(VI)) occurrence in soils is generally determined using an extraction step to transfer it to the liquid phase where it is more easily detected and quantified. In this work, the performance of the most common extraction procedure (EPA Method 3060A) using NaOH-Na(2)CO(3) solutions is evaluated using X-ray absorption near edge structure spectroscopy (XANES), which enables the quantification of Cr(VI) directly in the solid state. Results obtained with both methods were compared for three solid samples with different matrices: a soil containing chromite ore processing residue (COPR), a loamy soil, and a paint sludge. Results showed that Cr(VI) contents determined by the two methods differ significantly, and that the EPA Method 3060A procedure underestimated the Cr(VI) content in all studied samples. The underestimation is particularly pronounced for COPR. Low extraction yield for EPA Method 3060A was found to be the main reason. The Cr(VI) present in COPR was found to be more concentrated in magnetic phases. This work provides new XANES analyses of SRM 2701 and its extraction residues for the purpose of benchmarking EPA 3060A performance.

Investigation of glow-discharge-induced morphology modifications on silicon wafers and chromium conversion coatings by AFM and rugosimetry.

The effect of radiofrequency glow-discharge sputtering on the sample surface in terms of modifications in the surface morphology were investigated in this work by using atomic force microscopy (AFM) and rugosimetry measurements. The influence of GD operating parameters (e.g. rf power, discharge pressure and sputtering time) on surface roughening was investigated using two different types of samples: mirror-polished and homogeneous silicon wafers and chromate conversion coatings (CCCs). Surface morphology changes produced by GD sputtering into the sample surface were carefully investigated by AFM and rugosimetry, both at the original sample surface and at the bottom of GD craters using different GD experimental conditions, such as the sputtering time (from 1 s to 20 min), rf forward power (20-60 W for the Si wafer and 10-60 W for the CCC), and discharge pressure (400-1,000 Pa for the Si wafer and 500-1000 Pa for the CCC). In the present study, GD-induced morphology modifications were observed after rf-GD-OES analysis, both for the silicon wafers and the CCC. Additionally, the changes observed in surface roughness after GD sputtering were found to be sample-dependent, changing the proportion, shape and roughness of the micro-sized patterns and holes with the sample matrix and the GD conditions.