Structural and Photophysical Trends in Rhenium(I) Carbonyl Complexes with 2,2':6',2″-Terpyridines.

This is the first comprehensive review of rhenium(I) carbonyl complexes with 2,2':6',2″-terpyridine-based ligands (R-terpy)-encompassing their synthesis, molecular features, photophysical behavior, and potential applications. Particular attention has been devoted to demonstrating how the coordination mode of 2,2':6',2″-terpyridine (terpy-κ2N and terpy-κ3N), structural modifications of terpy framework (R), and the nature of ancillary ligands (X-mono-negative anion, L-neutral ligand) may tune the photophysical behavior of Re(I) complexes [Re(X/L)(CO)3(R-terpy-κ2N)]0/+ and [Re(X/L)(CO)2(R-terpy-κ3N)]0/+. Our discussion also includes homo- and heteronuclear multicomponent systems with {Re(CO)3(R-terpy-κ2N)} and {Re(CO)2(R-terpy-κ3N)} motifs. The presented structure-property relationships are of high importance for controlling the photoinduced processes in these systems and making further progress in the development of more efficient Re-based luminophores, photosensitizers, and photocatalysts for modern technologies.

Magnetic and Electrical Properties of CuCr2Se4 Nanoparticles.

CuCr2Se4 nanoparticles were obtained by the high-energy ball milling of CuCr2Se4 single crystals, which had a size of approximately 32 nm after 5 h of milling. Structural, magnetic, and electrical studies have shown that a reduction in CuCr2Se4 single crystals to the nanosize leads to (1) a weakening of ferromagnetic interactions, both long and short range, (2) a lack of saturation of magnetization at 5 K and 70 kOe, (3) a change in the nature of electrical conductivity from metallic to semiconductor, and (4) a reduction in the thermoelectric power factor S2σ by an order of magnitude of 400 K. The above results were considered in terms of the parameters of the band model, derived from the high-temperature expansion of magnetic susceptibility and from the diffusive component of thermoelectric power. Theoretical calculations showed a significant weakening of both the superexchange and double exchange mechanisms, a reduction in the [Cr3+,Cr4+] band width from 0.76 to 0.19 eV, and comparable values of the Fermi energy and the activation energy (0.46 eV) in the intrinsic region of electrical conductivity. The main advantage of high-energy ball milling is the ability to modify the physicochemical properties of already existing compounds for desired applications.

Pyrenyl-Substituted Imidazo[4,5-f][1,10]phenanthroline Rhenium(I) Complexes with Record-High Triplet Excited-State Lifetimes at Room Temperature: Steric Control of Photoinduced Processes in Bichromophoric Systems.

Photochemical applications based on intermolecular photoinduced energy triplet state transfer require photosensitizers with strong visible absorptivity and extended triplet excited-state lifetimes. Using a bichromophore approach, two Re(I) tricarbonyl complexes with 2-(1-pyrenyl)-1H-imidazo[4,5-f][1,10]phenanthroline (pyr-imphen) and 1-(4-(methyl)phenyl)-2-(1-pyrenyl)-imidazo[4,5-f][1,10]phenanthroline (pyr-tol-imphen) showing extraordinary long triplet excited states at room temperature (>1000 µs) were obtained, and their ground- and excited-state properties were thoroughly investigated by a wide range of spectroscopic methods, including femtosecond transient absorption (fs-TA). It is worth noting that the designed [ReCl(CO)3(pyr-imphen)] (1) and [ReCl(CO)3(pyr-tol-imphen)] (2) complexes form a unique pair differing in the mutual chromophore arrangement due to introduction of a 4-(methyl)phenyl substituent into the imidazole ring at the H1-position, imposing an increase in the dihedral angle between the pyrene and {ReCl(CO)3(imphen)} chromophores. The magnitude of the electronic coupling between the pyrene and {ReCl(CO)3(imphen)} chromophores was found to be an efficient tool to tune the photophysical properties of 1 and 2. The usefulness of designed Re(I) compounds as triplet photosensitizers was successfully verified by examination of their abilities for 1O2 generation and triplet-triplet annihilation upconversion. The phosphorescence lifetimes, ∼1800 µs for 1 and ∼1500 µs for 2, are the longest lifetimes reported for Re(I) diimine carbonyl complexes in solution at room temperature.

The sFlt-1/PlGF Ratio in Pregnant Patients Affected by COVID-19.

COVID-19 in pregnant women increases the risk of adverse pregnancy outcomes, including preeclampsia. This meta-analysis aimed to examine the effect of SARS-CoV-2 infection on sFlt-1/PIGF ratio during pregnancy. The study was designed as a systematic review and meta-analysis. PubMed, Web of Science, Embase and Cochrane Library were searched for relevant studies reporting the sFlt-1/PlGF ratio in pregnant women with COVID-19. Results were compared using meta-analysis by the Mantel-Haenszel method. A total of 7 studies were included in the analysis. sFlt-1/PlGF ratios between COVID-19 positive vs. negative women were 45.8 ± 50.3 vs. 37.4 ± 22.5, respectively (SMD = 1.76; 95% CI: 0.43 to 3.09; p = 0.01). sFlt-1/PlGF ratios between asymptomatic vs. symptomatic patients were 49.3 ± 35.7 vs. 37.1 ± 25.6 (SMD = 0.30; 95% CI: -0.35 to 0.95; p = 0.36). sFlt-1/PlGF ratio in non-severe group was 30.7 ± 56.5, compared to 64.7 ± 53.5 for severe patients (SMD = -1.88; 95% CI: -3.77 to 0.01; p = 0.05). sFlt-1/PlGF ratios in COVID-19 patients, with and without hypertensive disease of pregnancy, were 187.0 ± 121.8 vs. 21.6 ± 8.6, respectively (SMD = 2.46; 95% CI: 0.99 to 3.93; p = 0.001). Conclusions: Patients with COVID-19, as compared to patients without COVID-19, were characterized by higher sFlt-1/PlGF ratio. Moreover, severe COVID-19 and SARS-CoV-2 infection in hypertensive pregnant women was related to significantly higher sFlt-1/PlGF ratio.

sFlt-1/PlGF Ratio Is Not a Good Predictor of Severe COVID-19 nor of Adverse Outcome in Pregnant Women with SARS-CoV-2 Infection-A Case-Control Study.

BACKGROUND: Elevated serum levels of sFlt-1 were found in non-pregnant severe COVID-19 patients. The aim was to investigate sFlt-1/PlGF ratio as a predictor of severe disease and adverse outcome in pregnant women with COVID-19. METHODS: A single-center case-control study was conducted in pregnant women with SARS-CoV-2 infection. SARS-CoV-2-negative pregnant women served as controls. Serum sFlt-1/PlGF ratio was assessed. The primary outcome was severe COVID-19 and the secondary outcome comprised adverse outcomes including severe COVID-19, intensive care unit admission, maternal multiple organ failure, preterm delivery, fetal demise, preeclampsia or hypertension diagnosed after COVID-19, maternal death. RESULTS: 138 women with SARS-CoV-2 infection and 140 controls were included. sFlt-1/PlGF ratio was higher in infected patients (11.2 vs. 24; p < 0.01) and in women with severe disease (50.8 vs. 16.2; p < 0.01). However, it was similar in women with adverse and non-adverse outcome (29.8 vs. 20; p = 0.2). The AUC of sFlt-1/PlGF ratio was 0.66 (95% CI 0.56-0.76) for the prediction of severe COVID-19, and 0.72 (95% CI 0.63-0.79) for the prediction of adverse outcome. CONCLUSIONS: sFlt-1 and sFlt-1/PlGF ratio are related to SARS-CoV-2 infection and the severity of COVID-19 during pregnancy. However, sFlt-1/PlGF ratio is not a good predictor of severe COVID-19 or adverse outcome.

Hemoglobin differences in twins are related to the time of cord clamping, not intertwin transfusion - a prospective cohort study.

BACKGROUND: Delayed cord clamping increases placental transfusion. In vaginal deliveries higher hemoglobin concentrations are found in the second-born twin. We hypothesized it is unrelated to intertwin transfusion but to the time of cord clamping. METHODS: It was a prospective cohort study of 202 women delivering twins > 32 weeks of gestation. Monoamniotic pregnancy, antenatal intertwin transfusions, fetal demise or major abnormalities were excluded from the study. The time of cord clamping depended on the obstetrician's decision. Hemoglobin, hematocrit, and reticulocyte count were measured at birth and during the second day of life. RESULTS: At birth, hemoglobin and hematocrit levels were significantly higher in the first-born twins delivered with delayed than with early cord clamping. Higher hemoglobin and hematocrit levels were observed during the second day of life in all twins delivered with delayed cord clamping. The lowest levels were observed in twins delivered with early cord clamping. Infants delivered with delayed cord clamping were at a lower risk of respiratory disorders and NICU hospitalization. CONCLUSION: The observed differences in Hgb concentrations between the infants in a twin pregnancy are related to cord clamping time.

Wilms' tumor 1 antigen immunoreactivity in epithelial ovarian cancer - diagnostic and prognostic value.

OBJECTIVES: Ovarian cancer is a heterogeneous disease, with a number of different histological subtypes with various responses to treatment. Wilms' tumor 1 (WT1) immunoreactivity is used to distinguish between OC's various subtypes. However, little is known about the protein's role as a prognostic factor. Thus, the main aim of our study was to evaluate the relationship between WT1 expression and patient overall survival (OS) and lymph node metastases. MATERIALS AND METHODS: Study group consisted of 164 women aged 22-84, diagnosed with epithelial ovarian cancer (EOC). WT1 expression in histological slides was assessed by immunohistochemistry. RESULTS: Serous tumors were the most common subtype among EOC (n = 126; 76.8%), followed by endometrioid (n = 20; 12.2%), clear-cell (n = 14; 8.5%) and mucinous cancer (n = 4; 2.4%). Of all serous EOC, WT1-positive tumors accounted for 75.6% of cases and this number was significantly higher than in other histological subtypes (p < 0.0001). Patients with lymph node metastases were more likely to have WT1-positive than WT1-negative tumors (p = 0.006). There was no significant correlation between WT1 immunoreactivity and OS across the whole study group of EOC patients (p = 0.6); however, in the group of non-serous (mucinous, endometrioid and clear-cell) EOC subjects, WT1 immunoreactivity was associated with shorter OS (p = 0.046). CONCLUSIONS: WT1 immunoreactivity may be helpful in differentiating primary epithelial serous carcinomas from non-serous ovarian cancers; however, its prognostic role in EOC is rather uncertain.

In vitro antiproliferative effect of vanadium complexes bearing 8-hydroxyquinoline-based ligands - the substituent effect.

This is the first comprehensive study demonstrating the antiproliferative effect of vanadium complexes bearing 8-hydroxyquinoline (quinH) ligands, including the parent and -CH3 (Me), -NO2, -Cl and -I substituted ligands, on HCT116 and A2780 cancer cell lines. To determine the structure-cytotoxicity relationships seven six-coordinate oxovanadium(v) complexes [VO(OMe)(5,7-(Me)2-quin)2] (1), [VO(OMe)(5,7-Cl2-quin)2] (2), [VO(OMe)(5,7-Cl,I-quin)2] (3), [VO(OMe)(5,7-I2-quin)2] (4), [VO(OMe)(5-NO2-quin)2] (5), [VO(OMe)(5-Cl-quin)2] (6), and [VO(OMe)(quin)2] (7) were investigated. The cytotoxicity of 8-hydroxyquinoline oxovanadium(v) complexes is higher in the A2780 cell line (lower IC50) than that observed for the widely used chemotherapeutic agent, cisplatin, while displaying low cytotoxicity for normal human primary fibroblasts. Substituents introduced into the 8-hydroxyquinoline backbone reduced the antiproliferative effect of the vanadium complexes, and the complexes with the ligand substituted only in the 5 position (5 and 6) were more cytotoxic than those with substituents in the 5,7 positions of the quin backbone (1-4). Depending on the substituent type, the cytotoxicity of 1-4 followed the trend: -Cl > -CH3 > -I. Incubation of A2780 cancer cells with IC50 concentrations of complexes 5, 6 and 7 promoted cellular detachment, possibly through membrane destabilization, and triggered apoptosis and necrosis. ROS production might be responsible for the cell death mechanism observed particularly in the A2780 cells exposed to complexes 5 and 6.

Influence of Crystallite Size on the Magnetic Order in Semiconducting ZnCr2Se4 Nanoparticles.

Structural, electrical, magnetic, and specific heat measurements were carried out on ZnCr2Se4 single crystal and on nanocrystals obtained from the milling of this single crystal after 1, 3, and 5 h, whose crystallite sizes were 25.2, 2.5, and 2 nm, respectively. For this purpose, the high-energy ball-milling method was used. The above studies showed that all samples have a spinel structure, and are p-type semiconductors with less milling time and n-type with a higher one. In turn, the decrease in crystallite size caused a change in the magnetic order, from antiferromagnetic for bulk material and nanocrystals after 1 and 3 h of milling to spin-glass with the freezing temperature Tf = 20 K for the sample after 5 h of milling. The spin-glass behavior for this sample was derived from a broad peak of dc magnetic susceptibility, a splitting of the zero-field-cooling and field-cooling susceptibilities, and from the shift of Tf towards the higher frequency of the ac susceptibility curves. A spectacular result for this sample is also the lack of a peak on the specific heat curve, suggesting a disappearance of the structural transition that is observed for the bulk single crystal.

Preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) with ethylenediamine-modified graphene oxide.

We describe a novel solid phase sorbent that was synthesized by coupling graphene oxide (GO) to ethylenediamine (EDA). This nanomaterial (referred to as GO-EDA) is capable of adsorbing the ions of iron, cobalt, nickel, copper, zinc and lead. The ethylenediamine-modified graphene oxide was characterized by X-ray photoelectron spectroscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. The analytical procedure relies on (a) sorption of metal ions on GO-EDA dispersed in aqueous samples; (b) filtering, and (c) direct submission of the filter paper to energy-dispersive X-ray fluorescence spectrometry. This kind of dispersive micro-solid phase extraction was optimized with respect to pH values, concentration of GO-EDA, contact time, and the effects of interfering ions and humic acid on recovery of determined elements. Under optimized conditions, the recoveries of spiked samples range from 90 to 98 %. The detection limits are 0.07, 0.10, 0.07, 0.08, 0.06 and 0.10 ng mL-1 for Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II), respectively. The method has a relative standard deviation of <6 %, and its accuracy was verified by analysis of two standard reference materials [LGC6016 (estuarine water) and BCR-610 (groundwater)]. It was successfully applied to the determination of trace amounts of these metal ions in water samples. Graphical AbstractGraphene oxide was coupled to ethylenediamine in order to obtain an effective sorbent (GO-EDA) for preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) from environmental water samples.

Spherical silica particles decorated with graphene oxide nanosheets as a new sorbent in inorganic trace analysis.

Graphene oxide (GO) is a novel material with excellent adsorptive properties. However, the very small particles of GO can cause serious problems is solid-phase extraction (SPE) such as the high pressure in SPE system and the adsorbent loss through pores of frit. These problems can be overcome by covalently binding GO nanosheets to a support. In this paper, GO was covalently bonded to spherical silica by coupling the amino groups of spherical aminosilica and the carboxyl groups of GO (GO@SiO2). The successful immobilization of GO nanosheets on the aminosilica was confirmed by scanning electron microscopy and X-ray photoelectron spectroscopy. The spherical particle covered by GO with crumpled silk wave-like carbon sheets are an ideal sorbent for SPE of metal ions. The wrinkled structure of the coating results in large surface area and a high extractive capacity. The adsorption bath experiment shows that Cu(II) and Pb(II) can be quantitatively adsorbed at pH 5.5 with maximum adsorption capacity of 6.0 and 13.6 mg g(-1), respectively. Such features of GO nanosheets as softness and flexibility allow achieving excellent contact with analyzed solution in flow-rate conditions. In consequence, the metal ions can be quantitatively preconcentrated from high volume of aqueous samples with excellent flow-rate. SPE column is very stable and several adsorption-elution cycles can be performed without any loss of adsorptive properties. The GO@SiO2 was used for analysis of various water samples by flame atomic absorption spectrometry with excellent enrichment factors (200-250) and detection limits (0.084 and 0.27 ng mL(-1) for Cu(II) and Pb(II), respectively).

Adsorption of divalent metal ions from aqueous solutions using graphene oxide.

The adsorptive properties of graphene oxide (GO) towards divalent metal ions (copper, zinc, cadmium and lead) were investigated. GO prepared through the oxidation of graphite using potassium dichromate was characterized by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy (FT-IR). The results of batch experiments and measurements by flame atomic absorption spectrometry (F-AAS) indicate that maximum adsorption can be achieved in broad pH ranges: 3-7 for Cu(II), 5-8 for Zn(II), 4-8 for Cd(II), 3-7 for Pb(II). The maximum adsorption capacities of Cu(II), Zn(II), Cd(II) and Pb(II) on GO at pH = 5 are 294, 345, 530, 1119 mg g(-1), respectively. The competitive adsorption experiments showed the affinity in the order of Pb(II) > Cu(II) ≫ Cd(II) > Zn(II). Adsorption isotherms and kinetic studies suggest that sorption of metal ions on GO nanosheets is monolayer coverage and adsorption is controlled by chemical adsorption involving the strong surface complexation of metal ions with the oxygen-containing groups on the surface of GO. Chemisorption was confirmed by XPS (binding energy and shape of O1s and C1s peaks) of GO with adsorbed metal ions. The adsorption experiments show that the dispersibility of GO in water changes remarkably after complexation of metal ions. After adsorption, the tendency to agglomerate and precipitate is observed. Excellent dispersibility of GO and strong tendency of GO-Me(II) to precipitate open the path to removal of heavy metals from water solution. Potential application of GO in analytical chemistry as a solid sorbent for preconcentration of trace elements and in heavy metal ion pollution cleanup results from its maximum adsorption capacities that are much higher than those of any of the currently reported sorbents.

Determination of chemical composition of siderite in concretions by wavelength-dispersive X-ray spectrometry following selective dissolution.

Determination of chemical composition of siderite (Fe, Me)CO(3) (where Me=Mg, Ca, Mn) present in siderite concretion is developed. An accurate and precise determination of Mg, Ca, Mn and Fe in siderite required complete separation of this mineral from other materials, e.g. calcite, quartz. For this purpose, selective dissolution in acetic acid (HAc) was applied. HAc concentration from 0.1 to 1 mol L(-1) and extraction time from 0.5 to 8h were investigated. In each step of investigation of selective dissolution, the X-ray diffraction measurements (XRD) of the residues was performed and also calcium (complexometric titration) and iron (XRF) in solution were determined. HAc of concentration 0.25 mol L(-1) and extraction time of 2h was adopted for siderite separation because in these conditions the siderite was not dissolved and, simultaneously, calcite was completely dissolved. In the next step, the nondissolved sample was digested in hydrochloric acid. The solution of the separated siderite was pipetted onto membrane filter and Mg, Ca, Mn and Fe were determined by wavelength-dispersive X-ray fluorescence (WDXRF) spectrometry. The calibration was performed using 11 certified reference materials of iron ores. Matrix effects were corrected using empirical coefficient model for intermediate-thickness samples.