On the difficulties of isolating Clostridium difficile from hospital environments.

Spores of Clostridium difficile were deposited on to a stainless steel surface and subsequently exposed to a chlorine-releasing disinfectant (dichloroisocyanurate). Recovery of the spores was carried out using RODAC plates containing a variety of selective and non-selective agars. The non-selective agar media yielded higher recoveries of both control and chlorine-stressed spores. Our results show that the antibiotics used in selective media imposed an additional stress on both disinfectant-treated and untreated spores resulting in considerably reduced recoveries. This could lead to a serious underestimate of the extent of environmental contamination by this organism.

The uses and abuses of rapid bioluminescence-based ATP assays.

Bioluminescence-based ATP testing of solid surfaces has become well established in the food processing industry as part of general hazard analysis and critical control points (HACCP) measures. The rise in healthcare associated infections (HAIs) at the turn of the century focussed attention on the environment as a potential reservoir of the agents responsible for such infections. In response to the need for objective methods of assessing the efficiency of cleaning in healthcare establishments and for rapid methods for detecting the presence of the pathogens responsible for HAIs, it was proposed that ATP testing of environmental surfaces be introduced. We examine the basis behind the assumptions inherent in these proposals. Intracellular ATP levels are shown to vary between microbial taxa and according to environmental conditions. Good correlations between microbial numbers and ATP levels have been obtained under certain specific conditions, but never within healthcare settings. Notwithstanding, ATP testing may still have a role in providing reassurance that cleaning regimes are being carried out satisfactorily. However, ATP results should not be interpreted as surrogate indicators for the presence of microbial pathogens.

Preparation of novel mesoporous carbons for the adsorption of an inflammatory cytokine (IL-1 beta).

Mesoporous carbons derived from two types of sulphonated styrene divinylbenzene copolymers (Macronet MN500HS and CT275, Purolite International Ltd) were produced and their adsorptive capacity for the proinflammatory cytokine IL-1 beta (MW 14.4 kDa) determined. The carbons produced had surface areas from 400 to 1200 m(2)g(-1) and pore volume between 0.2 and 1.4 cm(3)g(-1). The mechanical strength of the carbon beads with surface area values up to 800 m(2)g(-1) were robust. The highest adsorption value of IL-1 beta was 150 ng g(-1) for a mesoporous carbon with surface area around 900 m(2)g(-1) and pore volume around 1.3 cm(3)g(-1). However, there was a trade-off between adsorptive capacity and mechanical strength. When used in conjunction with existing treatment modalities, the materials produced have the potential to enhance the removal of uraemic toxins.

Structural characteristics of activated carbons and ibuprofen adsorption affected by bovine serum albumin.

Structural characteristics of a series of MAST carbons were studied using scanning electron microscopy images and the nitrogen adsorption isotherms analyzed with several models of pores and different adsorption equations. A developed model of pores as a mixture of gaps between spherical nanoparticles and slitlike pores was found appropriate for MAST carbons. Adsorption of ibuprofen [2-(4-isobutylphenyl)propionic acid] on activated carbons possessing different pore size distributions in protein-free and bovine serum albumin (BSA)-containing aqueous solutions reveals the importance of the contribution of mesopores to the total porosity of adsorbents. The influence of the mesoporosity increases when considering the removal of the drug from the protein-containing solution. Cellulose-coated microporous carbon Norit RBX adsorbs significantly smaller amounts of ibuprofen than uncoated micro/mesoporous MAST carbons whose adsorption capability increases with increasing mesoporosity and specific surface area, burnoff dependent variable. A similar effect of broad pores is observed on adsorption of fibrinogen on the same carbons. Analysis of the ibuprofen adsorption data using Langmuir and D'Arcy-Watt equations as the kernel of the Fredholm integral equation shows that the nonuniformity of ibuprofen adsorption complexes diminishes with the presence of BSA. This effect may be explained by a partial adsorption of ibuprofen onto protein molecules immobilized on carbon particles and blocking of a portion of narrow pores.

Characterisation of novel modified active carbons and marine algal biomass for the selective adsorption of lead.

This paper discusses the sorption performance of novel materials for the removal of lead(II) and copper(II) from near-neutral aqueous solutions. Active carbons with surface heteroatoms of oxygen and phosphorus have been prepared. The surface functional groups display weakly acidic ion exchange characteristics. The optimum solution pH for maximum metal sorption is related to the pK values of the surface functional groups. In oxygenated active carbons, pK values are not distinct but can be obtained by describing proton binding to the heterogeneous adsorbent surface as a continuous proton affinity distribution. Information derived from zeta-potential measurements combined with knowledge of the pK distribution function and concentration of surface functional groups has been used to explain the selectivity of oxidised active carbons towards lead(lI) in the presence of copper(II) from multi-metal bearing solutions. Marine algal-based biosorbents have been challenged with lead(II) and copper(II)-bearing wastewater. The weakly acidic carboxyl groups of structural polysaccharides present within the algal matrix display high sorption capacity for both metals. The negative surface charge of algal particles results in electrostatic interactions as well as coordination between metal species and the adsorbent surface. Proton affinity for the algal surface lowers the negative surface potential at pH values around 2. The surface functional groups in algae unlike those in oxidised active carbons may be represented by discrete acid-dissociation constant values. The influence of conformational differences in uronic-acid segments upon metal ion selectivity is discussed.