RESUMO
Silica nanoparticles with a surface area of 673.60 m2/g and particle size of 8-12 nm were prepared using aerogel process (AP) followed by super critical drying. Zero valent Fe, Co, Pt, and bimetallic Fe/Pt and Fe/Co were loaded using an incipient wetness impregnation technique and subsequent reduction. Scanning electron microscopy-energy dispersive X-ray (SEM-EDX) and transmission electron microscopy-energy dispersive X-ray (TEM-EDX) characterizations indicated fine dispersion of iron on AP-SiO2 +Fe system. Prepared nanoparticles were evaluated for the adsorptive removal of 2,4,6-trinitrotoluene (TNT) from water. Surface area normalized rate constant values indicated the adsorptive removal potential of prepared nanoparticles to be: AP-SiO2 + Fe/Co > AP-SiO2 + Fe > CM (commercial) SiO2 + Fe > AP-SiO2 + Co > AP-SiO2 + Fe/Pt > AP-SiO2 + Pt. Lower pH helped in accelerating the reactive removal of TNT on zero valent iron loaded silica. AP-SiO2 + Fe/Co system showed the maximum adsorption potential (74 mg/g) after five cycles.
Assuntos
Nanopartículas Metálicas/química , Dióxido de Silício/química , Trinitrotolueno/análise , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Adsorção , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Tamanho da Partícula , Propriedades de Superfície , Trinitrotolueno/química , Poluentes Químicos da Água/químicaRESUMO
Nanoparticles of MgO, Al(2)O(3), CaO and SiO(2) were synthesized using aerogel route, and characterized by N(2)-BET, SEM, TEM, XRD, TGA and FT-IR techniques. Characterization indicated 2-75 nm diameter nanoparticles with 135-887 m(2)/g surface area and microporous-mesoporous characteristics. Prepared nanoparticles were tested for their adsorptive potential by conducting studies on kinetics of adsorption of diethylchlorophosphate under static conditions. The kinetic parameters such as equilibration constant, equilibration capacity, diffusional exponent and adsorbate-adsorbent interaction constant have been determined using linear driving force model and Fickian diffusion model. AP-MgO and AP-CaO showed the maximum (1011 mg/g) and minimum (690 mg/g) uptake of DEClP, respectively. All nanoparticles showed the values of diffusional exponent to be >0.5, indicating the diffusion mechanism to be anomalous. Hydrolysis reaction (identified using GC/MS technique) was found to be the route of degradation of DEClP.
