Effect of (Sm, In) Doping on the Electrical and Thermal Properties of Sb2Te3 Microstructures.

Doped Sb2Te3 narrow-band-gap semiconductors have been attracting considerable attention for different electronic and thermoelectric applications. Trivalent samarium (Sm)- and indium (In)-doped Sb2Te3 microstructures have been synthesized by the economical solvothermal method. Powder X-ray diffraction (PXRD) was used to verify the synthesis of single-phase doped and undoped Sb2Te3 and doping of Sm and In within the crystal lattice of Sb2Te3. Further, the morphology, structure elucidation, and stability have been investigated systematically by scanning electron microscopy (SEM), Raman analysis, and thermogravimetric analysis (TGA). These analyses verified the successful synthesis of hexagonal undoped Sb2Te3 (AT) and (Sm, In)-doped Sb2Te3 (SAT, IAT) microstructures. Moreover, the comparison of dielectric parameters, including dielectric constant, dielectric loss, and tan loss of AT, SAT, and IAT, was done in detail. An increment in the electrical conductivities, both AC and DC, from 1.92 × 10-4 to 4.9 × 10-3 Ω-1 m-1 and a decrease in thermal conductivity (0.68-0.60 W m-1 K-1) were observed due to the doping by trivalent (Sm, In) dopants. According to our best knowledge, the synthesis and dielectric properties of (Sm, In)-doped and undoped Sb2Te3 in comparison with their electrical properties and thermal conductivity have not been reported earlier. This implies that appropriate doping with (Sm, In) in Sb2Te3 is promising to enhance the electronic and thermoelectric behavior.

Green Synthesis of Silver Nanoparticles Using the Plant Extract of Acer oblongifolium and Study of Its Antibacterial and Antiproliferative Activity via Mathematical Approaches.

In this study, the antibacterial and antifungal properties of silver nanoparticles synthesized with the aqueous plant extract of Acer oblongifolium leaves were defined using a simplistic, environmentally friendly, reliable, and cost-effective method. The aqueous plant extract of Acer oblongifolium, which served as a capping and reducing agent, was used to biosynthesize silver nanoparticles. UV visible spectroscopy, X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and scanning electron microscopy were used to analyze the biosynthesized Acer oblongifolium silver nanoparticles (AgNPs). Gram-positive bacteria (Bacillus paramycoides and Bacillus cereus) and Gram-negative bacteria (E. coli) were used to test the AgNPs' antibacterial activity. The presence of different functional groups was determined by FTIR. The AgNPs were rod-like in shape. The nanoparticles were more toxic against Escherichiacoli than both Bacillus cereus and Bacillus paramycoides. The AgNPs had IC50 values of 6.22 and 9.43 and mg/mL on HeLa and MCF-7, respectively, proving their comparatively strong potency against MCF-7. This confirmed that silver nanoparticles had strong antibacterial activity and antiproliferative ability against MCF-7 and HeLa cell lines. The mathematical modeling revealed that the pure nanoparticle had a high heat-absorbing capacity compared to the mixed nanoparticle. This research demonstrated that the biosynthesized Acer oblongifolium AgNPs could be used as an antioxidant, antibacterial, and anticancer agent in the future.

An Overview of Recent Advances in the Synthesis and Applications of the Transition Metal Carbide Nanomaterials.

Good stability and reproducibility are important factors in determining the place of any material in their respective field and these two factors also enable them to use in various applications. At present, transition metal carbides (TMCs) have high demand either in the two-dimensional (2D) form (MXene) or as nanocomposites, nanoparticles, carbide films, carbide nano-powder, and carbide nanofibers. They have shown good stability at high temperatures in different environments and also have the ability to show adequate reproducibility. Metal carbides have shown a broad spectrum of properties enabling them to engage the modern approach of multifacet material. Several ways have been routed to synthesize metal carbides in their various forms but few of those gain more attention due to their easy approach and better properties. TMCs find applications in various fields, such as catalysts, absorbents, bio-sensors, pesticides, electrogenerated chemiluminescence (ECL), anti-pollution and anti-bacterial agents, and in tumor detection. This article highlights some recent developments in the synthesis methods and applications of TMCs in various fields.

Semiconducting composite oxide Y2CuO4-5CuO thin films for investigation of photoelectrochemical properties.

An octa-nuclear heterobimetallic complex [Y2Cu6Cl0.7(dmae)6(OAc)7.3(OH)4(H2O)2]·3H2O·0.3CH3C6H5 (dmae = dimethylaminoethanoate; OAc = acetato) was synthesized, characterized by melting point analysis, elemental analysis, FT-IR, and single crystal X-ray diffraction analysis and implemented at 600 °C under an oxygen atmosphere for the deposition of Y2CuO4-5CuO composite thin films by aerosol assisted chemical vapor deposition (AACVD). The chemical composition and surface morphology of the deposited thin film have been determined by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis that suggest the formation of impurity-free crystallite mixtures of the Y2CuO4-5CuO composite, with well-defined evenly distributed particles in the size range of 19-24 nm. An optical band gap energy of 1.82 eV was estimated by UV-visible spectrophotometry. PEC studies show that under illumination with a 150 W halogen lamp and at a potential of 0.8 V, a photocurrent density of 9.85 µA cm(-2) was obtained.

Perovskite-structured PbTiO3 thin films grown from a single-source precursor.

Perovskite-structured lead titanate thin films have been grown on FTO-coated glass substrates from a single-source heterometallic molecular complex, [PbTi(µ2-O2CCF3)4(THF)3(µ3-O)]2 (1), which was isolated in quantitative yield from the reaction of tetraacetatolead(IV), tetrabutoxytitanium(IV), and trifluoroacetic acid from a tetrahydrofuran solution. Complex 1 has been characterized by physicochemical methods such as melting point, microanalysis, FTIR, (1)H and (19)F NMR, thermal analysis, and single-crystal X-ray diffraction (XRD) analysis. Thin films of lead titanate having spherical particles of various sizes have been grown from 1 by aerosol-assisted chemical vapor deposition at 550 °C. The thin films have been characterized by powder XRD, scanning electron microscopy, and energy-dispersive X-ray analysis. An optical band gap of 3.69 eV has been estimated by UV-visible spectrophotometry.