Unsaturated hemiwicking dynamics on surfaces with irregular roughness.

HYPOTHESIS: Spreading of wetting liquids on rough surfaces can occur in a regime termed hemiwicking in which liquid advances ahead of the bulk liquid droplet front under the influence of capillary forces induced by the surface topography. When the surface topography is periodic as in the case for micropillar arrays, the wetting front is sharp and models describing the wetting dynamics can be derived directly from the periodic geometry. For materials with a highly irregular surface topography, the wetting front is diffuse and deriving analytical spreading model parameters directly from the surface topography is not generally possible. EXPERIMENTS: In this work, a previously published model for liquid spreading on thin porous materials is modified to incorporate unsaturated spreading ahead of the bulk liquid droplet using Richards equation. The permeability, K, and capillary pressure, pc, of the liquid in the surface roughness are the primary model parameters describing the spreading dynamics in Richards equation. These are determined by fitting to one-dimensional spreading experiments of silicone oil on a polyurethane-based paint coating with roughness on the scale of microns. FINDINGS: The resulting predictions of spreading dynamics for droplets with different initial sizes is good. It is also shown that reasonable model parameters can also be determined from the irregular surface topography by spatial filtering over 10 µm wavelength increments covering the range 10-500 µm. Approximate periodic micropillar arrays are defined from the filtered topography for each wavelength increment, enabling analytical estimates of the permeability and capillary pressure. Although using only the surface topography results in somewhat less accurate predictions, the savings in experimental and computational effort make it an attractive method for determining spreading model parameters.

Solvent-Assisted Desorption of 2,5-Lutidine from Polyurethane Films.

A fundamental understanding of chemical interactions and transport mechanisms that result from introducing multiple chemical species into a polymer plays a key role in the development and optimization of membranes, coatings, and decontamination formulations. In this study, we explore the solvent-assisted desorption of a penetrant (2,5-lutidine) in polyurethane with aprotic (acetonitrile) and protic (methanol) solvents. Chemical interactions between solvent, penetrant, and polymer functional groups are characterized via time-resolved Fourier transform infrared spectroscopy (FTIR) during single and multicomponent exposures. For both solvents, an increase in the extraction rate of the penetrant is observed when the solvent is applied during desorption. Inspection of the FTIR spectra reveals two potential mechanisms that facilitate the enhanced desorption rate: (1) penetrant/solvent competition for hydrogen donor groups on the polymer backbone and (2) disruption of the self-interaction (cohesive forces) between neighboring polymer chains. Finally, the aprotic solvent is found to generate an order of magnitude greater desorption rate of the penetrant, which is attributed to a greater disruption of the self-interaction during penetrant desorption compared to the protic solvent and the inability of an aprotic solvent to form larger and potentially slower penetrant-solvent complexes.

Synthesis and Characterization of Segmented Polyurethanes Containing Trisaminocyclopropenium Carbocations.

Diol-functionalized trisaminocyclopropenium (TACP) carbocations were used as chain extenders in a two-step synthesis of a segmented polyurethane. Differential scanning calorimetry demonstrated significant differences in the crystallization behavior of the poly(tetramethylene oxide) soft segment when minor changes were made to the TACP structure and when compared to a control that was chain extended with butane diol. Fourier transform infrared spectroscopy was used to characterize the different level of hydrogen bonding in the polymers and showed that the bulky, charged TACP chain extender limited hydrogen bonding interactions when compared to the control. Dynamic mechanical analysis was used to probe the thermomechanical behavior of polymers that showed that the TACP-containing polymers were much more resistant to flow at high temperatures when compared to the control. Small-angle X-ray scattering showed a phase separated morphology for all the polymers tested. Tensile testing of the TACP polyurethanes demonstrated an elastic response over a wide range of strain, followed by a significant strain hardening. These results suggest a morphology of ionic aggregates rather than hard segment physical cross-links.

An inverse analysis approach to the characterization of chemical transport in paints.

The ability to directly characterize chemical transport and interactions that occur within a material (i.e., subsurface dynamics) is a vital component in understanding contaminant mass transport and the ability to decontaminate materials. If a material is contaminated, over time, the transport of highly toxic chemicals (such as chemical warfare agent species) out of the material can result in vapor exposure or transfer to the skin, which can result in percutaneous exposure to personnel who interact with the material. Due to the high toxicity of chemical warfare agents, the release of trace chemical quantities is of significant concern. Mapping subsurface concentration distribution and transport characteristics of absorbed agents enables exposure hazards to be assessed in untested conditions. Furthermore, these tools can be used to characterize subsurface reaction dynamics to ultimately design improved decontaminants or decontamination procedures. To achieve this goal, an inverse analysis mass transport modeling approach was developed that utilizes time-resolved mass spectroscopy measurements of vapor emission from contaminated paint coatings as the input parameter for calculation of subsurface concentration profiles. Details are provided on sample preparation, including contaminant and material handling, the application of mass spectrometry for the measurement of emitted contaminant vapor, and the implementation of inverse analysis using a physics-based diffusion model to determine transport properties of live chemical warfare agents including distilled mustard (HD) and the nerve agent VX.

Direct measurement of chemical distributions in heterogeneous coatings.

Chemical warfare agents (CWA) can be absorbed by variety of materials including polymeric coatings like paints through bulk liquid contact, thus presenting touch and vapor hazards to interacting personnel. In order for accurate hazard assessments and subsequent decontamination approaches to be designed, it is necessary to characterize the absorption and distribution of highly toxic species, as well as their chemical simulant analogs, in the subsurface of engineered, heterogeneous materials. Using a combination of judicious sample preparation in concert with scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), it should be possible to directly measure the uptake and distribution of CWA simulants in the subsurface of complex multilayer coatings. Polyurethane and alkyd coatings were applied to aluminum and silicon substrates and contaminated with 2-chloroethyl ethyl sulfide (CEES) and dimethyl methylphosphonate (DMMP). The surfaces and cross-sectional interfaces of the contaminated coatings were probed with SEM-EDS to provide imaging, spectral, and elemental mapping data of the contaminant-material systems. This work demonstrated SEM-EDS capability to detect and spatially resolve unique elemental signatures of CWA simulants within military coatings. The visual and quantitative results provided by these direct measurements illustrate contaminant spatial distributions, provide order-of-magnitude approximations for diffusion coefficients, and reveal material characteristics that may impact contaminant transport into complex coating materials. It was found that contaminant uptake was significantly different between the topcoat and primer layers.

Multifunctional ultra-high vacuum apparatus for studies of the interactions of chemical warfare agents on complex surfaces.

A fundamental understanding of the surface chemistry of chemical warfare agents is needed to fully predict the interaction of these toxic molecules with militarily relevant materials, catalysts, and environmental surfaces. For example, rules for predicting the surface chemistry of agents can be applied to the creation of next generation decontaminants, reactive coatings, and protective materials for the warfighter. Here, we describe a multifunctional ultra-high vacuum instrument for conducting comprehensive studies of the adsorption, desorption, and surface chemistry of chemical warfare agents on model and militarily relevant surfaces. The system applies reflection-absorption infrared spectroscopy, x-ray photoelectron spectroscopy, and mass spectrometry to study adsorption and surface reactions of chemical warfare agents. Several novel components have been developed to address the unique safety and sample exposure challenges that accompany the research of these toxic, often very low vapor pressure, compounds. While results of vacuum-based surface science techniques may not necessarily translate directly to environmental processes, learning about the fundamental chemistry will begin to inform scientists about the critical aspects that impact real-world applications.

Physics-based agent to simulant correlations for vapor phase mass transport.

Chemical warfare agent simulants are often used as an agent surrogate to perform environmental testing, mitigating exposure hazards. This work specifically addresses the assessment of downwind agent vapor concentration resulting from an evaporating simulant droplet. A previously developed methodology was used to estimate the mass diffusivities of the chemical warfare agent simulants methyl salicylate, 2-chloroethyl ethyl sulfide, di-ethyl malonate, and chloroethyl phenyl sulfide. Along with the diffusivity of the chemical warfare agent bis(2-chloroethyl) sulfide, the simulant diffusivities were used in an advection-diffusion model to predict the vapor concentrations downwind from an evaporating droplet of each chemical at various wind velocities and temperatures. The results demonstrate that the simulant-to-agent concentration ratio and the corresponding vapor pressure ratio are equivalent under certain conditions. Specifically, the relationship is valid within ranges of measurement locations relative to the evaporating droplet and observation times. The valid ranges depend on the relative transport properties of the agent and simulant, and whether vapor transport is diffusion or advection dominant.

Experimental and numerical study of spread and sorption of VX sessile droplets into medium grain-size sand.

The experimental measurement and modeling of liquid chemical agent spread and sorption on a porous substrate are described. Experimental results with the nerve agent O-ethyl S-(2-diisopropylaminoethyl) methylphosphonothiolate (VX) demonstrate that the wetted imprint volume increases, even after the sessile drop volume is exhausted. This indicates the wetted imprint is only partially saturated, and a multiphase flow problem formulation is needed to predict the VX fate in porous substrates. Three characteristics and their changes in time: (i) sessile volume remaining, (ii) wetted imprint area on the sand surface where the droplet is deposited, and (iii) VX penetration depth into sand, are computed numerically and compared to experimentally measured values. A very good qualitative and quantitative agreement was found between the numerical and experimental results. These numerical and experimental methods can be used to determine the spread and sorption of hazardous materials into a variety of substrates.

Effects of hydration on molecular junction transport.

The study of charge transport through increasingly complex small molecules will benefit from a detailed understanding of how contaminants from the environment affect molecular conduction. This should provide a clearer picture of the electronic characteristics of molecules by eliminating interference from adsorbed species. Here we use magnetically assembled microsphere junctions incorporating thiol monolayers to provide insight into changing electron transport characteristics resulting from exposure to air. Using this technique, current-voltage analysis and inelastic electron tunnelling spectroscopy (IETS) demonstrate that the primary interaction affecting molecular conduction is rapid hydration at the gold-sulphur contacts. We use IETS to present evidence for changing mechanisms of charge transport as a result of this interaction. The detrimental effects on molecular conduction discussed here are important for understanding electron transport through gold-thiol molecular junctions once exposed to atmospheric conditions.

Molecular engineering and measurements to test hypothesized mechanisms in single molecule conductance switching.

Six customized phenylene-ethynylene-based oligomers have been studied for their electronic properties using scanning tunneling microscopy to test hypothesized mechanisms of stochastic conductance switching. Previously suggested mechanisms include functional group reduction, functional group rotation, backbone ring rotation, neighboring molecule interactions, bond fluctuations, and hybridization changes. Here, we test these hypotheses experimentally by varying the molecular designs of the switches; the ability of the molecules to switch via each hypothetical mechanism is selectively engineered into or out of each molecule. We conclude that hybridization changes at the molecule-surface interface are responsible for the switching we observe.

Observation and manipulation of subsurface hydride in Pd[111] and its effect on surface chemical, physical, and electronic properties.

We report the observation and manipulation of hydrogen atoms beneath the surface of a Pd[111] crystal by using low-temperature scanning tunneling microscopy. These subsurface hydride sites have been postulated to have critical roles in hydrogen storage, metal embrittlement, fuel cells, and catalytic reactions, but they have been neither observed directly nor selectively populated previously. We demonstrate that the subsurface region of Pd can be populated with hydrogen atoms from the bulk by applying voltage pulses from a scanning tunneling microscope tip. This phenomenon is explained with an inelastic excitation mechanism, whereby hydrogen atoms in the bulk are excited by tunneling electrons and are promoted to more stable sites in the subsurface region. We show that this selectively placed subsurface hydride affects the electronic, geometric, and chemical properties of the surface. Specifically, we observed the effects of hydride formation on surface deformation and charge and on adsorbed hydrogen on the surface. Hydrogen segregation and overlayer vacancy ordering on the Pd[111] have been characterized and explained in terms of the surface changes attributable to selective hydrogen occupation of subsurface hydride sites in Pd[111].

Cross-step place-exchange of oligo(phenylene-ethynylene) molecules.

We have observed nitro-functionalized oligo(phenylene-ethynylene) molecules exhibiting motion up and down Au{111} substrate monatomic step edges within host self-assembled monolayers of n-alkanethiols, independent of previously observed conductance switching. Single molecules have been imaged with scanning tunneling microscopy to place-exchange reversibly between the top and bottom of monatomic substrate step edges.

Substrate-mediated intermolecular interactions: a quantitative single molecule analysis.

Long-range intermolecular interactions mediated by the surface are believed to be responsible for many effects in surface science, including molecular ordering, formation of nanostructures, and aligning reactive intermediates in catalysis. Here, we use scanning tunneling microscopy to probe the weak substrate-mediated interactions in benzene overlayers on Au{111} at 4 K. Using an automated procedure to monitor single molecule motion, we are able to quantify the substrate-mediated interaction strength. We explain quantitatively both the kinetics of the benzene motion and the thermodynamics that determine the packing structures benzene adopts in this system in light of these substrate-mediated interactions.

Benzene on Au[111] at 4 K: monolayer growth and tip-induced molecular cascades.

Low-temperature scanning tunneling microscopy has been used to characterize the various structures of submonolayer and near-monolayer coverages of benzene (C6H6) on Au[111] at 4 K. At low coverage, benzene is found to adsorb preferentially at the top of the Au monatomic steps and is weakly adsorbed on the terraces. At near-monolayer coverage, benzene was found to form several long-range commensurate overlayer structures that depend on the regions of the reconstructed Au[111] surface, namely a (radical 52 x radical 52)R13.9 degrees structure over the hcp regions and a (radical 133 x radical 133)R17.5 degrees "pinwheel" structure over the fcc regions. Time-lapse imaging revealed concerted cascade motion of the benzene molecules in the (radical 133 x radical 133)R17.5 degrees pinwheel overlayer. We demonstrate that the observed cascade motion is a result of concerted molecular motion and not independent random motion.