Arsenic contamination of natural waters in San Juan and La Pampa, Argentina.

Arsenic (As) speciation in surface and groundwater from two provinces in Argentina (San Juan and La Pampa) was investigated using solid phase extraction (SPE) cartridge methodology with comparison to total arsenic concentrations. A third province, Río Negro, was used as a control to the study. Strong cation exchange (SCX) and strong anion exchange (SAX) cartridges were utilised in series for the separation and preservation of arsenite (As(III)), arsenate (As(V)), monomethylarsonic acid (MA(V)) and dimethylarsinic acid (DMA(V)). Samples were collected from a range of water outlets (rivers/streams, wells, untreated domestic taps, well water treatment works) to assess the relationship between total arsenic and arsenic species, water type and water parameters (pH, conductivity and total dissolved solids, TDS). Analysis of the waters for arsenic (total and species) was performed by inductively coupled plasma mass spectrometry (ICP-MS) in collision cell mode. Total arsenic concentrations in the surface and groundwater from Encon and the San José de Jáchal region of San Juan (north-west Argentina within the Cuyo region) ranged from 9 to 357 µg l(-1) As. Groundwater from Eduardo Castex (EC) and Ingeniero Luiggi (LU) in La Pampa (central Argentina within the Chaco-Pampean Plain) ranged from 3 to 1326 µg l(-1) As. The pH range for the provinces of San Juan (7.2-9.7) and La Pampa (7.0-9.9) are in agreement with other published literature. The highest total arsenic concentrations were found in La Pampa well waters (both rural farms and pre-treated urban sources), particularly where there was high pH (typically > 8.2), conductivity (>2,600 µS cm(-1)) and TDS (>1,400 mg l(-1)). Reverse osmosis (RO) treatment of well waters in La Pampa for domestic drinking water in EC and LU significantly reduced total arsenic concentrations from a range of 216-224 µg l(-1) As to 0.3-0.8 µg l(-1) As. Arsenic species for both provinces were predominantly As(III) and As(V). As(III) and As(V) concentrations in San Juan ranged from 4-138 µg l(-1) to <0.02-22 µg l(-1) for surface waters (in the San José de Jáchal region) and 23-346 µg l(-1) and 0.04-76 µg l(-1) for groundwater, respectively. This translates to a relative As(III) abundance of 69-100% of the total arsenic in surface waters and 32-100% in groundwater. This is unexpected because it is typically thought that in oxidising conditions (surface waters), the dominant arsenic species is As(V). However, data from the SPE methodology suggests that As(III) is the prevalent species in San Juan, indicating a greater influence from reductive processes. La Pampa groundwater had As(III) and As(V) concentrations of 5-1,332 µg l(-1) and 0.09-592 µg l(-1) for EC and 32-242 µg l(-1) and 30-277 µg l(-1) As for LU, respectively. Detectable levels of MA(V) were reported in both provinces up to a concentration of 79 µg l(-1) (equating to up to 33% of the total arsenic). Previously published literature has focused primarily on the inorganic arsenic species, however this study highlights the potentially significant concentrations of organoarsenicals present in natural waters. The potential for separating and preserving individual arsenic species in the field to avoid transformation during transport to the laboratory, enabling an accurate assessment of in situ arsenic speciation in water supplies is discussed.

Field based speciation of arsenic in UK and Argentinean water samples.

A field method is reported for the speciation of arsenic in water samples that is simple, rapid, safe to use beyond laboratory environments, and cost effective. The method utilises solid-phase extraction cartridges (SPE) in series for selective retention of arsenic species, followed by elution and measurement of eluted fractions by inductively coupled plasma mass spectrometry (ICP-MS) for "total" arsenic. The method is suitable for on-site separation and preservation of arsenic species from water. Mean percentage accuracies (n = 25) for synthetic solutions of arsenite (As(III)), arsenate (As(V)), monomethylarsonic acid (MA), and dimethylarsinic acid (DMA) containing 10 µg l(-1) As, were 98, 101, 94, and 105%, respectively. Data are presented to demonstrate the effect of pH and competing anions on the retention of the arsenic species. The cartridges were tested in the UK and Argentina at sites where arsenic was known to be present in surface and groundwaters, respectively, at elevated concentrations and under challenging matrix conditions. In Argentinean groundwater, 4-20% of speciated arsenic was present as MA and 20-73% as As(III). In UK surface waters, speciated arsenic was measured as 7-49% MA and 12-42% DMA. Comparative data from the field method using SPE cartridges and the laboratory method using liquid chromatography coupled to ICP-MS for all water samples provided a correlation of greater than 0.999 for As(III) and DMA, 0.991 for MA, and 0.982 for As(V) (P < 0.01).