Dual modality intravascular catheter system combining pulse-sampling fluorescence lifetime imaging and polarization-sensitive optical coherence tomography.

The clinical management of coronary artery disease and the prevention of acute coronary syndromes require knowledge of the underlying atherosclerotic plaque pathobiology. Hybrid imaging modalities capable of comprehensive assessment of biochemical and morphological plaques features can address this need. Here we report the first implementation of an intravascular catheter system combining fluorescence lifetime imaging (FLIm) with polarization-sensitive optical coherence tomography (PSOCT). This system provides multi-scale assessment of plaque structure and composition via high spatial resolution morphology from OCT, polarimetry-derived tissue microstructure, and biochemical composition from FLIm, without requiring any molecular contrast agent. This result was achieved with a low profile (2.7 Fr) double-clad fiber (DCF) catheter and high speed (100 fps B-scan rate, 40 mm/s pullback speed) console. Use of a DCF and broadband rotary junction required extensive optimization to mitigate the reduction in OCT performance originating from additional reflections and multipath artifacts. This challenge was addressed by the development of a broad-band (UV-visible-IR), high return loss (47 dB) rotary junction. We demonstrate in phantoms, ex vivo swine coronary specimens and in vivo swine heart (percutaneous coronary access) that the FLIm-PSOCT catheter system can simultaneously acquire co-registered FLIm data over four distinct spectral bands (380/20 nm, 400/20 nm, 452/45 nm, 540/45 nm) and PSOCT backscattered intensity, birefringence, and depolarization. The unique ability to collect complementary information from tissue (e.g., morphology, extracellular matrix composition, inflammation) with a device suitable for percutaneous coronary intervention offers new opportunities for cardiovascular research and clinical diagnosis.

Pulse-sampling fluorescence lifetime imaging: evaluation of photon economy.

This Letter presents an experimental study comparing the photon rate and photon economy of pulse sampling fluorescence lifetime imaging (PS-FLIm) with the conventional time-correlated single photon counting (TCSPC) technique. We found that PS-FLIm has a significantly higher photon detection rate (200 MHz) compared with TCSPC (2-8 MHz) but lower photon economy (4-5 versus 1-1.3). The main factor contributing to the lower photon economy in PS-FLIm is laser pulse variability. These results demonstrate that PS-FLIm offers 25× faster imaging speed than TCSPC while maintaining room light rejection in clinical settings. This makes PS-FLIm a robust technique for clinical applications.

Intraoperative molecular imaging: 3rd biennial clinical trials update.

Significance: This third biennial intraoperative molecular imaging (IMI) conference shows how optical contrast agents have been applied to develop clinically significant endpoints that improve precision cancer surgery. Aim: National and international experts on IMI presented ongoing clinical trials in cancer surgery and preclinical work. Previously known dyes (with broader applications), new dyes, novel nonfluorescence-based imaging techniques, pediatric dyes, and normal tissue dyes were discussed. Approach: Principal investigators presenting at the Perelman School of Medicine Abramson Cancer Center's third clinical trials update on IMI were selected to discuss their clinical trials and endpoints. Results: Dyes that are FDA-approved or currently under clinical investigation in phase 1, 2, and 3 trials were discussed. Sections on how to move benchwork research to the bedside were also included. There was also a dedicated section for pediatric dyes and nonfluorescence-based dyes that have been newly developed. Conclusions: IMI is a valuable adjunct in precision cancer surgery and has broad applications in multiple subspecialties. It has been reliably used to alter the surgical course of patients and in clinical decision making. There remain gaps in the utilization of IMI in certain subspecialties and potential for developing newer and improved dyes and imaging techniques.

In vivo characterization of the human glioblastoma infiltrative edge with label-free intraoperative fluorescence lifetime imaging.

Challenges in identifying a glioblastoma's infiltrative edge during neurosurgical procedures result in rapid recurrence. A label-free fluorescence lifetime imaging (FLIm) device was used to evaluate glioblastoma's infiltrative edge in vivo in 15 patients (89 samples). FLIm data were analyzed according to tumor cell density, infiltrating tissue type (gray and white matter), and diagnosis history (new or recurrent). Infiltrations in white matter from new glioblastomas showed decreasing lifetimes and a spectral red shift with increasing tumor cell density. Areas of high versus low tumor cell density were separated through a linear discriminant analysis with a ROC-AUC=0.74. Current results support the feasibility of intraoperative FLIm for real-time in vivo brain measurements and encourage refinement to predict glioblastoma infiltrative edge, underscoring the ability of FLIm to optimize neurosurgical outcomes.

Anatomy-Specific Classification Model Using Label-Free FLIm to Aid Intraoperative Surgical Guidance of Head and Neck Cancer.

Intraoperative identification of head and neck cancer tissue is essential to achieve complete tumor resection and mitigate tumor recurrence. Mesoscopic fluorescence lifetime imaging (FLIm) of intrinsic tissue fluorophores emission has demonstrated the potential to demarcate the extent of the tumor in patients undergoing surgical procedures of the oral cavity and the oropharynx. Here, we report FLIm-based classification methods using standard machine learning models that account for the diverse anatomical and biochemical composition across the head and neck anatomy to improve tumor region identification. Three anatomy-specific binary classification models were developed (i.e., "base of tongue," "palatine tonsil," and "oral tongue"). FLIm data from patients (N = 85) undergoing upper aerodigestive oncologic surgery were used to train and validate the classification models using a leave-one-patient-out cross-validation method. These models were evaluated for two classification tasks: (1) to discriminate between healthy and cancer tissue, and (2) to apply the binary classification model trained on healthy and cancer to discriminate dysplasia through transfer learning. This approach achieved superior classification performance compared to models that are anatomy-agnostic; specifically, a ROC-AUC of 0.94 was for the first task and 0.92 for the second. Furthermore, the model demonstrated detection of dysplasia, highlighting the generalization of the FLIm-based classifier. Current findings demonstrate that a classifier that accounts for tumor location can improve the ability to accurately identify surgical margins and underscore FLIm's potential as a tool for surgical guidance in head and neck cancer patients, including those subjects of robotic surgery.

Multimodal fluorescence lifetime imaging and optical coherence tomography for longitudinal monitoring of tissue-engineered cartilage maturation in a preclinical implantation model.

Significance: Cartilage tissue engineering is a promising strategy for effective curative therapies for treatment of osteoarthritis. However, tissue engineers depend predominantly on time-consuming, expensive, and destructive techniques as quality control to monitor the maturation of engineered cartilage. This practice can be impractical for large-scale biomanufacturing and prevents spatial and temporal monitoring of tissue growth, which is critical for the fabrication of clinically relevant-sized cartilage constructs. Nondestructive multimodal imaging techniques combining fluorescence lifetime imaging (FLIm) and optical coherence tomography (OCT) hold great potential to address this challenge. Aim: The feasibility of using multimodal FLIm-OCT for nondestructive, spatial, and temporal monitoring of self-assembled cartilage tissue maturation in a preclinical mouse model is investigated. Approach: Self-assembled cartilage constructs were developed for 4 weeks in vitro followed by 4 weeks of in vivo maturation in nude mice. Sterile and nondestructive in situ multispectral FLIm and OCT imaging were carried out at multiple time points ( t = 2 , 4, and 8 weeks) during tissue development. FLIm and 3D volumetric OCT images were reconstructed and used for the analysis of tissue biochemical homogeneity, morphology, and structural integrity. A biochemical homogeneity index was computed to characterize nonhomogeneous tissue growth at different time points. OCT images were validated against histology. Results: FLIm detects heterogenous extracellular matrix (ECM) growth of tissue-engineered cartilage. The outer edge of the tissue construct exhibited longer fluorescence lifetime in 375 to 410 and 450 to 485 nm spectral channels, indicating increase in collagen content. Significant ( p < 0.05 ) decrease of construct homogeneity index was observed between t = 2 weeks and t = 4 weeks. Both FLIm and OCT images revealed defects (voids) at the center of the tissue construct during in vitro culture ( t = 2 and 4 weeks). Cyst formation during in vivo culture was detected by OCT and confirmed with histology. Conclusions: The ability of multimodal FLIm-OCT to nondestructively monitor the heterogenous growth of engineered tissue constructs in situ is demonstrated. Spatial and temporal variation of construct ECM component was detected by FLIm. OCT reveals structural defects (voids and cysts). This multimodal approach has great potential to replace costly destructive tests in the manufacturing of tissue-engineered medical products, facilitating their clinical translation.

Intraoperative detection of IDH-mutant glioma using fluorescence lifetime imaging.

Identifying isocitrate dehydrogenase (IDH)-mutation and glioma subtype during surgery instead of days later can aid in modifying tumor resection strategies for better survival outcomes. We report intraoperative identification of IDH-mutant glioma (N = 12 patients) with a clinically compatible fluorescence lifetime imaging (FLIm) device (excitation: 355 nm; emission spectral bands: 390/40 nm, 470/28 nm, 542/50 nm). The fluorescence-derived parameters were analyzed to study the optical contrast between IDH-mutant tumors and surrounding brain tissue. IDH-mutant oligodendrogliomas exhibited shorter lifetimes (3.3 ± 0.1 ns) than IDH-mutant astrocytomas (4.1 ± 0.1 ns). Both IDH-mutant glioma subtypes had shorter lifetimes than white matter (4.6 ± 0.4 ns) but had comparable lifetimes to cortex. Lifetimes also increased with malignancy grade within IDH-mutant oligodendrogliomas (grade 2: 2.96 ± 0.08 ns, grade 3: 3.4 ± 0.3 ns) but not within IDH-mutant astrocytomas. The current results support the feasibility of FLIm as a surgical adjuvant for identifying IDH-mutant glioma tissue.

Engineering the gain and bandwidth in avalanche photodetectors.

Avalanche and Single-Photon Avalanche photodetectors (APDs and SPADs) rely on the probability of photogenerated carriers to trigger a multiplication process. Photon penetration depth plays a vital role in this process. In silicon APDs, a significant fraction of the short visible wavelengths is absorbed close to the device surface that is typically highly doped to serve as a contact. Most of the photogenerated carriers in this region can be lost by recombination, get slowly transported by diffusion, or multiplied with high excess noise. On the other hand, the extended penetration depth of near-infrared wavelengths requires thick semiconductors for efficient absorption. This diminishes the speed of the devices due to the long transit time in the thick absorption layer that is required for detecting most of these photons. Here, we demonstrate that it is possible to drive photons to a critical depth in a semiconductor film to maximize their gain-bandwidth performance and increase the absorption efficiency. This approach to engineering the penetration depth for different wavelengths in silicon is enabled by integrating photon-trapping nanoholes on the device surface. The penetration depth of short wavelengths such as 450 nm is increased from 0.25 µm to more than 0.62 µm. On the other hand, for a long-wavelength like 850 nm, the penetration depth is reduced from 18.3 µm to only 2.3 µm, decreasing the device transit time considerably. Such capabilities allow increasing the gain in APDs by almost 400× at 450 nm and by almost 9× at 850 nm. This engineering of the penetration depth in APDs would enable device designs requiring higher gain-bandwidth in emerging technologies such as Fluorescence Lifetime Microscopy (FLIM), Time-of-Flight Positron Emission Tomography (TOF-PET), quantum communications systems, and 3D imaging systems.

Non-destructive, continuous monitoring of biochemical, mechanical, and structural maturation in engineered tissue.

Regulatory guidelines for tissue engineered products require stringent characterization during production and necessitate the development of novel, non-destructive methods to quantify key functional parameters for clinical translation. Traditional assessments of engineered tissues are destructive, expensive, and time consuming. Here, we introduce a non-destructive, inexpensive, and rapid sampling and analysis system that can continuously monitor the mechanical, biochemical, and structural properties of a single sample over extended periods of time. The label-free system combines the imaging modalities of fluorescent lifetime imaging and ultrasound backscatter microscopy through a fiber-based interface for sterile monitoring of tissue quality. We tested the multimodal system using tissue engineered articular cartilage as an experimental model. We identified strong correlations between optical and destructive testing. Combining FLIm and UBM results, we created a novel statistical model of tissue homogeneity that can be applied to tissue engineered constructs prior to implantation. Continuous monitoring of engineered tissues with this non-destructive system has the potential for in-process monitoring of tissue engineered products, reducing costs and improving quality controls in research, manufacturing, and clinical applications.

Dual-modality fluorescence lifetime imaging-optical coherence tomography intravascular catheter system with freeform catheter optics.

SIGNIFICANCE: Intravascular imaging is key to investigations into atherosclerotic plaque pathobiology and cardiovascular diagnostics overall. The development of multimodal imaging devices compatible with intracoronary applications has the potential to address limitations of currently available single-modality systems. AIM: We designed and characterized a robust, high performance multimodal imaging system that combines optical coherence tomography (OCT) and multispectral fluorescence lifetime imaging (FLIm) for intraluminal simultaneous assessment of structural and biochemical properties of coronary arteries. APPROACH: Several shortcomings of existing FLIm-OCT catheter systems are addressed by adopting key features, namely (1) a custom fiber optic rotary joint based on an air bearing, (2) a broadband catheter using a freeform reflective optics, and (3) integrated solid-state FLIm detectors. Improvements are quantified using a combination of experimental characterization and simulations. RESULTS: Excellent UV and IR coupling efficiencies and stability (IR: 75.7 % ± 0.4 % , UV: 45.7 % ± 0.35 % ) are achieved; high FLIm optical performance is obtained (UV beam FWHM: 50 µm) contemporaneously with excellent OCT beam quality (IR beam FWHM: 17 µm). High-quality FLIm OCT image of a human coronary artery specimen was acquired. CONCLUSION: The ability of this intravascular imaging system to provide comprehensive structural and biochemical properties will be valuable to further our understanding of plaque pathophysiology and improve cardiovascular diagnostics.

Intraoperative delineation of p16+ oropharyngeal carcinoma of unknown primary origin with fluorescence lifetime imaging: Preliminary report.

BACKGROUND: This study evaluated whether fluorescence lifetime imaging (FLIm), coupled with standard diagnostic workups, could enhance primary lesion detection in patients with p16+ head and neck squamous cell carcinoma of the unknown primary (HNSCCUP). METHODS: FLIm was integrated into transoral robotic surgery to acquire optical data on six HNSCCUP patients' oropharyngeal tissues. An additional 55-patient FLIm dataset, comprising conventional primary tumors, trained a machine learning classifier; the output predicted the presence and location of HNSCCUP for the six patients. Validation was performed using histopathology. RESULTS: Among the six HNSCCUP patients, p16+ occult primary was surgically identified in three patients, whereas three patients ultimately had no identifiable primary site in the oropharynx. FLIm correctly detected HNSCCUP in all three patients (ROC-AUC: 0.90 ± 0.06), and correctly predicted benign oropharyngeal tissue for the remaining three patients. The mean sensitivity was 95% ± 3.5%, and specificity 89% ± 12.7%. CONCLUSIONS: FLIm may be a useful diagnostic adjunct for detecting HNSCCUP.

First in patient assessment of brain tumor infiltrative margins using simultaneous time-resolved measurements of 5-ALA-induced PpIX fluorescence and tissue autofluorescence.

SIGNIFICANCE: 5-aminolevulinic acid (5-ALA)-induced protoporphyrin IX (PpIX) fluorescence is currently used for image-guided glioma resection. Typically, this widefield imaging method highlights the bulk of high-grade gliomas, but it underperforms at the infiltrating edge where PpIX fluorescence is not visible to the eyes. Fluorescence lifetime imaging (FLIm) has the potential to detect PpIX fluorescence below the visible detection threshold. Moreover, simultaneous acquisition of time-resolved nicotinamide adenine (phosphate) dinucleotide [NAD(P)H] fluorescence may provide metabolic information from the tumor environment to further improve overall tumor detection. AIM: We investigate the ability of pulse sampling, fiber-based FLIm to simultaneously image PpIX and NAD(P)H fluorescence of glioma infiltrative margins in patients. APPROACH: A mesoscopic fiber-based point-scanning FLIm device (355 nm pulses) was used to simultaneously resolve the fluorescence decay of PpIX (629/53 nm) and NAD(P)H (470/28 nm). The FLIm device enabled data acquisition at room light and rapid (<33 ms) augmentation of FLIm parameters on the surgical field-of-view. FLIm measurements from superficial tumors and tissue areas around the resection margins were performed on three glioblastoma patients in vivo following inspection of PpIX visible fluorescence with a conventional neurosurgical microscope. Microbiopsies were collected from FLIm imaged areas for histopathological evaluation. RESULTS: The average lifetime from PpIX and NAD(P)H fluorescence distinguished between tumor and surrounding tissue. FLIm measurements of resection margins presented a range of PpIX and NAD(P)H lifetime values (τPpIX   ∼ 3 to 14 ns, τNAD(P)H = 3 to 6 ns) associated with unaffected tissue and areas of low-density tumor infiltration. CONCLUSIONS: Intraoperative FLIm could simultaneously detect the emission of PpIX and NAD(P)H from patients in vivo during craniotomy procedures. This approach doubles as a clinical tool to identify tumor areas while performing tissue resection and as a research tool to study tumor microenvironmental changes in vivo. Intraoperative FLIm of 5-ALA-induced PpIX and tissue autofluorescence makes a promising surgical adjunct to guide tumor resection surgery.

Assessment of Murine Colon Inflammation Using Intraluminal Fluorescence Lifetime Imaging.

Inflammatory bowel disease (IBD) is typically diagnosed by exclusion years after its onset. Current diagnostic methods are indirect, destructive, or target overt disease. Screening strategies that can detect low-grade inflammation in the colon would improve patient prognosis and alleviate associated healthcare costs. Here, we test the feasibility of fluorescence lifetime imaging (FLIm) to detect inflammation from thick tissue in a non-destructive and label-free approach based on tissue autofluorescence. A pulse sampling FLIm instrument with 355 nm excitation was coupled to a rotating side-viewing endoscopic probe for high speed (10 mm/s) intraluminal imaging of the entire mucosal surface (50-80 mm) of freshly excised mice colons. Current results demonstrate that tissue autofluorescence lifetime was sensitive to the colon anatomy and the colonocyte layer. Moreover, mice under DSS-induced colitis and 5-ASA treatments showed changes in lifetime values that were qualitatively related to inflammatory markers consistent with alterations in epithelial bioenergetics (switch between ß-oxidation and aerobic glycolysis) and physical structure (colon length). This study demonstrates the ability of intraluminal FLIm to image mucosal lifetime changes in response to inflammatory treatments and supports the development of FLIm as an in vivo imaging technique for monitoring the onset, progression, and treatment of inflammatory diseases.

Multimodal Scanning Microscope Combining Optical Coherence Tomography, Raman Spectroscopy and Fluorescence Lifetime Microscopy for Mesoscale Label-Free Imaging of Tissue.

Multimodal optical imaging of tissue has significant potential to become an indispensable diagnostic tool in clinical pathology. Conventional bright-field microscopy provides contrast based on attenuation or reflectance of light, having no depth-related information and no molecular specificity. Recent developments in biomedical optics have introduced a variety of optical modalities, such as Raman spectroscopy (RS), fluorescence lifetime imaging microscopy (FLIM) of endogenous fluorophores, optical coherence tomography (OCT), and others, which provide a distinct characteristic, i.e., molecular, chemical, and morphological information, of the sample. To harvest the full analytical potential of those modalities, we have developed a novel multimodal imaging system, which allows the co-registered acquisition of OCT/FLIM/RS on a single device. The present implementation allows the investigation of biological tissues in the mesoscale range, 0.1-5 mm in a correlated manner. Due to the co-registered acquisition of the modalities, it is possible to directly compare and evaluate the corresponding information between the three modalities. Moreover, by additionally preparing and characterizing entire pathological hematoxylin and eosin (H&E) slides of head and neck biopsies, it is also possible to correlate the multimodal spectroscopic information to any location of the ground truth H&E information. To the best of our knowledge, this is the first development and implementation of a compact and clinically applicable multimodal scanning microscope, which combines OCT, FLIM, and RS together with the possibility for co-registering H&E information for a morpho-chemical tissue characterization and a correlation with the pathological ground truth (H&E) of the underlying signal origin directly in a clinical environment.

Multispectral fluorescence lifetime imaging device with a silicon avalanche photodetector.

We report the design, development, and characterization of a novel multi-spectral fluorescence lifetime measurement device incorporating solid-state detectors and automated gain control. For every excitation pulse (∼1 µJ, 600 ps), this device records complete fluorescence decay from multiple spectral channels simultaneously within microseconds, using a dedicated UV enhanced avalanche photodetector and analog to digital convert (2.5 GS/s) in each channel. Fast (<2 ms) channel-wise dynamic range adjustment maximizes the signal-to-noise ratio. Fluorophores with known lifetime ranging from 0.5-6.0 ns were used to demonstrate the device accuracy. Current results show the clear benefits of this device compared to existing devices employing microchannel-plate photomultiplier tubes. This is demonstrated by 5-fold reduction of lifetime measurement variability in identical conditions, independent gain adjustment in each spectral band, and 4-times faster imaging speed. The use of solid-state detectors will also facilitate future improved performance and miniaturization of the instrument.

Intraoperative Mapping of Parathyroid Glands Using Fluorescence Lifetime Imaging.

BACKGROUND: Hypoparathyroidism is a common complication following thyroidectomy. There is a need for technology to aid surgeons in identifying the parathyroid glands. In contrast to near infrared technologies, fluorescence lifetime imaging (FLIm) is not affected by ambient light and may be valuable in identifying parathyroid tissue, but has never been evaluated in this capacity. METHODS: We used FLIm to measure the UV induced (355 nm) time-resolved autofluorescence signatures (average lifetimes in 3 spectral emission channels) of thyroid, parathyroid, lymphoid and adipose tissue in 21 patients undergoing thyroid and parathyroid surgery. The Mann-Whitney U test was used to assess the ability of FLIm to discriminate normocellular parathyroid from each of the other tissues. Various machine learning classifiers (random forests, neural network, support vector machine) were then evaluated to recognize parathyroid through a leave-one-out cross-validation. RESULTS: Statistically significant differences in average lifetime were observed between parathyroid and each of the other tissue types in spectral channels 2 and 3 respectively. The largest change was observed between adipose tissue and parathyroid (P < 0.001), while less pronounced but still significant changes were observed when comparing parathyroid with lymphoid tissue (P < 0.05) and thyroid (P < 0.01). A random forest classifier trained on average lifetimes was found to detect parathyroid tissue with 100% sensitivity and 93% specificity at the acquisition run level. CONCLUSION: We found that FLIm derived parameters can distinguish the parathyroid glands and other adjacent tissue types and has promise in scanning the surgical field to identify parathyroid tissue in real-time.

Mesoscopic fluorescence lifetime imaging: Fundamental principles, clinical applications and future directions.

Fluorescence lifetime imaging (FLIm) is an optical spectroscopic imaging technique capable of real-time assessments of tissue properties in clinical settings. Label-free FLIm is sensitive to changes in tissue structure and biochemistry resulting from pathological conditions, thus providing optical contrast to identify and monitor the progression of disease. Technical and methodological advances over the last two decades have enabled the development of FLIm instrumentation for real-time, in situ, mesoscopic imaging compatible with standard clinical workflows. Herein, we review the fundamental working principles of mesoscopic FLIm, discuss the technical characteristics of current clinical FLIm instrumentation, highlight the most commonly used analytical methods to interpret fluorescence lifetime data and discuss the recent applications of FLIm in surgical oncology and cardiovascular diagnostics. Finally, we conclude with an outlook on the future directions of clinical FLIm.

Label-Free Visualization and Quantification of Biochemical Markers of Atherosclerotic Plaque Progression Using Intravascular Fluorescence Lifetime.

OBJECTIVES: This study aimed to systematically investigate whether plaque autofluorescence properties assessed with intravascular fluorescence lifetime imaging (FLIm) can provide qualitative and quantitative information about intimal composition and improve the characterization of atherosclerosis lesions. BACKGROUND: Despite advances in cardiovascular diagnostics, the analytic tools and imaging technologies currently available have limited capabilities for evaluating in situ biochemical changes associated with luminal surface features. Earlier studies of small number of samples have shown differences among the autofluorescence lifetime signature of well-defined lesions, but a systematic pixel-level evaluation of fluorescence signatures associated with various histological features is lacking and needed to better understand the origins of fluorescence contrast. METHODS: Human coronary artery segments (n = 32) were analyzed with a bimodal catheter system combining multispectral FLIm with intravascular ultrasonography compatible with in vivo coronary imaging. Various histological components present along the luminal surface (200-µm depth) were systematically tabulated (12 sectors) from each serial histological section (n = 204). Morphological information provided by ultrasonography allowed for the accurate registration of imaging data with histology data. The relationships between histological findings and FLIm parameters obtained from 3 spectral channels at each measurement location (n = 33,980) were characterized. RESULTS: Our findings indicate that fluorescence lifetime from different spectral bands can be used to quantitatively predict the superficial presence of macrophage foam cells (mFCs) (area under the receiver-operator characteristic curve: 0.94) and extracellular lipid content in advanced lesions (lifetime increase in 540-nm band), detect superficial calcium (lifetime decrease in 450-nm band area under the receiver-operator characteristic curve: 0.90), and possibly detect lesions consistent with active plaque formation such as pathological intimal thickening and healed thrombus regions (lifetime increase in 390-nm band). CONCLUSIONS: Our findings indicate that autofluorescence lifetime provides valuable information for characterizing atherosclerotic lesions in coronary arteries. Specifically, FLIm can be used to identify key phenomena linked with plaque progression (e.g., peroxidized-lipid-rich mFC accumulation and recent plaque formation).

Intraoperative Margin Assessment in Oral and Oropharyngeal Cancer Using Label-Free Fluorescence Lifetime Imaging and Machine Learning.

OBJECTIVE: To demonstrate the diagnostic ability of label-free, point-scanning, fiber-based Fluorescence Lifetime Imaging (FLIm) as a means of intraoperative guidance during oral and oropharyngeal cancer removal surgery. METHODS: FLIm point-measurements acquired from 53 patients (n = 67893 pre-resection in vivo, n = 89695 post-resection ex vivo) undergoing oral or oropharyngeal cancer removal surgery were used for analysis. Discrimination of healthy tissue and cancer was investigated using various FLIm-derived parameter sets and classifiers (Support Vector Machine, Random Forests, CNN). Classifier output for the acquired set of point-measurements was visualized through an interpolation-based approach to generate a probabilistic heatmap of cancer within the surgical field. Classifier output for dysplasia at the resection margins was also investigated. RESULTS: Statistically significant change (P 0.01) between healthy and cancer was observed in vivo for the acquired FLIm signal parameters (e.g., average lifetime) linked with metabolic activity. Superior classification was achieved at the tissue region level using the Random Forests method (ROC-AUC: 0.88). Classifier output for dysplasia (% probability of cancer) was observed to lie between that of cancer and healthy tissue, highlighting FLIm's ability to distinguish various conditions. CONCLUSION: The developed approach demonstrates the potential of FLIm for fast, reliable intraoperative margin assessment without the need for contrast agents. SIGNIFICANCE: Fiber-based FLIm has the potential to be used as a diagnostic tool during cancer resection surgery, including Transoral Robotic Surgery (TORS), helping ensure complete resections and improve the survival rate of oral and oropharyngeal cancer patients.

FLImBrush: dynamic visualization of intraoperative free-hand fiber-based fluorescence lifetime imaging.

A free-hand scanning approach to medical imaging allows for flexible, lightweight probes to image intricate anatomies for modalities such as fluorescence lifetime imaging (FLIm), optical coherence tomography (OCT) and ultrasound. While very promising, this approach faces several key challenges including tissue motion during imaging, varying lighting conditions in the surgical field, and sparse sampling of the tissue surface. These challenges limit the coregistration accuracy and interpretability of the acquired imaging data. Here we report FLImBrush as a robust method for the localization and visualization of intraoperative free-hand fiber optic fluorescence lifetime imaging (FLIm). FLImBrush builds upon an existing method while employing deep learning-based image segmentation, block-matching based motion correction, and interpolation-based visualization to address the aforementioned challenges. Current results demonstrate that FLImBrush can provide accurate localization of FLIm point-measurements while producing interpretable and complete visualizations of FLIm data acquired from a tissue surface. Each of the main processing steps was shown to be capable of real-time processing (> 30 frames per second), highlighting the feasibility of FLImBrush for intraoperative imaging and surgical guidance. Current findings show the feasibility of integrating FLImBrush into a range of surgical applications including cancer margins assessment during head and neck surgery.