Solid-phase extraction and gas chromatographic- mass spectrometric determination of the veterinary drug xylazine in human blood.

This paper presents a method for the determination of xylazine in whole blood using solid-phase extraction and gas chromatography-mass spectrometry. This technique required only 0.5 mL of sample, and protriptyline was used as internal standard (IS). Limits of detection and quantitation (LOQ) were 2 and 10 ng/mL, respectively. The method was found to be linear between the LOQ and 3.50 microg/mL, with correlation coefficients higher than 0.9922. Precision (intra- and interday) and accuracy were in conformity with the criteria normally accepted in bioanalytical method validation. The analyte was stable in the matrix for at least 18 h at room temperature and for at least three freeze/thaw cycles. Mean recovery, calculated at three concentration levels, was 87%. To the best of our knowledge, this is the first time that solid-phase extraction is used as sample preparation technique for the determination of this compound in biological media. Because of its simplicity and speed when compared to other extraction techniques, the herein described method can be successfully applied in the diagnosis of intoxications by xylazine.

Determination of parathion in biological fluids by means of direct solid-phase microextraction.

A new and simple procedure for the determination of parathion in human whole blood and urine using direct immersion (DI) solid-phase microextraction (SPME) and gas chromatography/mass spectrometry (GC/MS) is presented. This technique was developed using only 100 microL of sample, and ethion was used as internal standard (IS). A 65-microm Carbowax/divinylbenzene (CW/DVB) SPME fibre was selected for sampling, and the main parameters affecting the SPME process such as extraction temperature, adsorption and desorption time, salt addition, agitation and pH effect were optimized to enhance the sensitivity of the method. This optimization was also performed to allow the qualitative determination of parathion's main metabolite, paraoxon, in blood. The limits of detection and quantitation for parathion were 3 and 10 ng/mL for urine and 25 and 50 ng/mL for blood, respectively. For paraoxon, the limit of detection was 50 ng/mL in blood. The method showed linearity between the LOQ and 50 microg/mL for both matrices, with correlation coefficients ranging from 0.9954 to 0.9999. Precision and accuracy were in conformity with the criteria normally accepted in bioanalytical method validation. The mean absolute recoveries were 35.1% for urine and 6.7% for blood. Other parameters such as dilution of sample and stability were also validated. Its simplicity and the fact that only 100 microL of sample is required to accomplish the analysis make this method useful in forensic toxicology laboratories to determine this compound in intoxications, and it can be considered an alternative to other methods normally used for the determination of this compound in biological media.

Analytical approach to determine ticlopidine in post-mortem blood.

A new and sensitive method to determine ticlopidine in whole human blood using proadifen as the internal standard (IS) is described. The analyte and IS were extracted by solid-phase extraction using Oasis HLB cartridges, and the extracts were analyzed by gas chromatography-electron impact ionisation-mass spectrometry (GC/EI-MS). Calibration curves were established daily in spiked blood samples using a non-linear calibration model, between 0.01 and 4.5 microg/mL. The correlation coefficients were higher than 0.995. Precision and accuracy fulfilled the internationally accepted criteria (coefficients of variation were less than 9%, and the measured concentrations were within +/-7% of the true value). Limits of detection and quantitation were respectively, 3 and 10 ng/mL. No interfering substances were detected by analysis of 10 blank blood samples of different origin. Mean recovery, calculated at three concentration levels, was 71%. Because of its simplicity and speed, the proposed method can be applied in the determination of this inhibitor of platelet aggregation in whole blood samples, and is suitable for application in toxicology routine analysis.

Solid-phase microextraction for gas chromatographic/mass spectrometric analysis of dimethoate in human biological samples.

A new, simple and rapid procedure for the determination of dimethoate in urine and blood samples was developed using direct immersion solid-phase microextraction and gas chromatography/mass spectrometry. This technique required only 0.1 mL of sample, and ethion was used as internal standard. Two types of coated fibre were compared (100 microm polydimethylsiloxane, and 65 microm Carbowax/divinylbenzene). Other parameters, such as extraction temperature, adsorption and desorption time, salt addition, agitation and pH, were optimized to enhance the sensitivity of the method. Limits of detection (LODs) and quantitation (LOQs) were 50 and 100 ng/mL for urine and 200 and 500 ng/mL for blood, respectively. The method was found to be linear between the LOQ and 40 microg/mL for urine, and between the LOQ and 50 microg/mL for blood, with correlation coefficients ranging from 0.9923-0.9996. Precision (intra- and interday) and accuracy were in conformity with the criteria normally accepted in bioanalytical method validation. The mean absolute recoveries of dimethoate were 1.24 and 0.50% for urine and blood, respectively. Because of its simplicity and the fact that small volumes of sample are used, the described method can be successfully used in the diagnosis of poisoning by this pesticide, namely in those situations where the sample volume is limited, as frequently occurs in forensic toxicology.

Determination of quinalphos in blood and urine by direct solid-phase microextraction combined with gas chromatography-mass spectrometry.

A new method based on direct solid-phase microextraction (DI-SPME) followed by gas chromatography-mass spectrometry was developed for the purpose of determining quinalphos in blood and urine. Two types of coated fibre have been assayed and compared: carbowax/divinylbenzene (CW/DVB 65 microm) and polydimethylsiloxane (PDMS 100 microm). The main parameters affecting the SPME process such as temperature, salt addition, pH, stirring and adsorption/desorption time profiles were optimized to enhance the sensitivity of the procedure. The method was developed using only 100 microL of blood and urine. Limits of detection of the method for blood and urine matrices were, respectively, 10 and 2 ng/mL. Linearity was established over concentration ranges from 0.05 to 50 microg/mL for blood, and 0.01 to 50 microg/mL for urine, with regression coefficients ranging between 0.9991 and 0.9999. Intra- and interday precision values were less than 13%, and accuracy was within +/-15% of the nominal concentration for all studied levels in both matrices. Absolute recoveries were 14 and 26% for blood and urine, respectively.

Determination of strychnine in human blood using solid-phase extraction and GC-EI-MS.

A rapid, simple, and sensitive method has been developed for the identification and quantitation of strychnine in human blood. The sample cleanup procedure involved solid-phase extraction with Oasis(R) HLB cartridges. The extracts were analyzed by gas chromatography-electron impact ionization-mass spectrometry. Limits of detection (LOD) and quantitation (LOQ) were 0.03 and 0.10 microg/mL, respectively, and the method was found to be linear between the LOQ and 2.5 microg/mL, with a correlation coefficient of 0.9994. Intra- and interday precision and accuracy were determined at both low and high concentrations (0.50 and 2.00 microg/mL). The CVs ranged from 5.63 to 8.50% and bias was within +/- 10% of the true value. Mean recovery of strychnine was 90.7%. Because of its simplicity and speed, the described method can be applied in forensic toxicology laboratories to determine this alkaloid in whole blood samples. Also, the fact that only 0.5 mL of blood is required to accomplish the analysis make this procedure useful in situations where several exams are needed and the sample volume is limited.

Application of solid phase microextraction to the determination of strychnine in blood.

A simple and rapid method based on solid phase microextraction (SPME) via direct immersion followed by gas chromatography coupled with electron impact ionization/mass spectrometry (GC/EI-MS) was developed for the determination of strychnine in blood. Papaverine was used as internal standard (I.S.). Two types of fibre coating were tested, 100 microm polydimethylsiloxane and 65 microm Carbowax/Divinylbenzene, the latter giving higher recoveries of the compound. The main factors affecting the SPME process, such as sample dilution (1:10), adsorption and desorption times (20 and 10 min, respectively), carry-over effect (not observed), pH and salt addition (no modifications on pH or salt concentration) were optimized. The procedure was validated in terms of linearity (r(2)=0.9992 for concentrations ranging from 0.10 to 5.00 microg/mL), intra and interday precision (0.93 and 4.62%, respectively at 0.50 microg/mL; 3.33 and 8.06%, respectively at 2.50 microg/mL), sensitivity (6.83 and 8.91 ng/mL for LOD and LOQ, respectively) and extraction recovery (0.54 and 0.39% at 0.50 and 2.50 microg/mL, respectively). The developed procedure was found suitable for forensic investigations and was considered a good alternative to the liquid-liquid extraction methods normally used for the determination of this compound in biological media.