Nanoplastic Labelling with Metal Probes: Analytical Strategies for Their Sensitive Detection and Quantification by ICP Mass Spectrometry.

The detection and quantification of nanoplastics in aquatic environments is one of the major challenges in environmental and analytical research nowadays. The use of common analytical techniques for this purpose is not only hampered by the size of nanoplastics, but also because they are mainly made of carbon. In addition, the expected concentrations in environmental samples are below the detection limit of the majority of analytical techniques. In this context, the great detection capabilities of Inductively Coupled Plasma Mass Spectrometry (ICP-MS) in its Single Particle mode (SP-ICP-MS) have made of this technique a good candidate for the analysis of nanoplastics. Since the monitoring of carbon by ICP-MS faces several difficulties, the use of metal tags, taking advantage of the great potential of nanoplastics to adsorb chemical compounds, has been proposed as an alternative. In this perspectives paper, three different strategies for the analysis of polystyrene (PS) nanoplastics by SP-ICP-MS based on the use of metals species (ions, hydrophobic organometallic compound, and nanoparticles) as tags are presented and discussed. Advantages and disadvantages of each strategy, which rely on the labelling process, are highlighted. The metal nanoparticles labelling strategy is shown as a promising tool for the detection and quantification of nanoplastics in aqueous matrices by SP-ICP-MS.

A Novel Strategy for the Detection and Quantification of Nanoplastics by Single Particle Inductively Coupled Plasma Mass Spectrometry (ICP-MS).

A method for the detection and quantification of nanoplastics (NPTs) at environmentally relevant concentrations was developed. It is based on conjugating nanoplastics with functionalized metal (Au)-containing nanoparticles (NPs), thus making them detectable by highly sensitive inductively coupled plasma mass spectrometry (ICP-MS) operated in single particle (SP) mode. The selectivity of the method was achieved by the coupling of negatively charged carboxylate groups present at the surface of nanoplastics with a positively charged gelatin attached to the custom-synthesized AuNPs. The adsorbed Au produced a SP-ICP-MS signal allowing the counting of individual nanoplastic particles, and hence their accurate quantification (<5% error). Polystyrene (PS) particle models with controlled surface functionalization mimicking the nanoplastics formed during natural degradation of plastic debris were used for the method development. The nanoplastic number concentration quantification limit was calculated at 8.4 × 105 NPTs L-1 and the calibration graph was linear up to 3.5 × 108 NPTs L-1. The method was applied to the analysis of nanoplastics of up to 1 µm in drinking, tap, and river water. The minimum detectable and quantifiable size depended on the degree of functionalization and the surface available for labeling. For a fully functionalized nanoplastic, the lower size detectable by this strategy is reported as 135 nm. In this study, authors use the recommendation for the definition of nanoplastics as plastic particles with sizes ranging between 1 nm and 1 µm, although it has not been accepted by a dedicated organization.