Poly(lactic acid)-Based Ink for Biodegradable Printed Electronics With Conductivity Enhanced through Solvent Aging.

Biodegradable electronics is a rapidly growing field, and the development of controllably biodegradable, high-conductivity materials suitable for additive manufacturing under ambient conditions remains a challenge. In this report, printable conductive pastes that employ poly(lactic acid) (PLA) as a binder and tungsten as a conductor are demonstrated. These composite conductors can provide enhanced stability in applications where moisture may be present, such as environmental monitoring or agriculture. Post-processing the printed traces using a solvent-aging technique increases their conductivity by up to 2 orders of magnitude, with final conductivities approaching 5000 S/m. Such techniques could prove useful when thermal processes including heating or laser sintering are limited by the temperature constraints of typical biodegradable substrates. Both accelerated oxidative and hydrolytic degradation of the printed composite conductors are examined, and a fully biodegradable capacitive soil moisture sensor is fabricated and tested.

Intrinsic Thermal Desorption in a 3D Printed Multifunctional Composite CO2 Sorbent with Embedded Heating Capability.

Efficient removal of CO2 from enclosed environments is a significant challenge, particularly in human space flight where strict restrictions on mass and volume are present. To address this issue, this study describes the use of a multimaterial, layer-by-layer, additive manufacturing technique to directly print a structured multifunctional composite for CO2 sorption with embedded, intrinsic, heating capability to facilitate thermal desorption, removing the need for an external heat source from the system. This multifunctional composite is coprinted from an ink formulation based on zeolite 13X, and an electrically conductive sorbent ink formulation, which includes metal particles blended with the zeolite. The composites are characterized using analytical and imaging tools and then tested for CO2 adsorption/desorption. The resistivity of the conductive sorbent is <2 mΩ m, providing a temperature increase up to 200 °C under 7 V applied bias, which is sufficient to trigger CO2 desorption. The CO2 adsorption capability of the conductive zeolite ink appears to be unaffected by the presence of the conductive particles, meaning a large fraction of the total mass of the structured composite device is functional.