Synthesis of 2D PtSe2 Nanolayers on Glass Substrates and Their Integration in Near-Infrared Light Shutters.

PtSe2 has asserted its key role among the emerging 2D transition metal dichalcogenides, however, its simplified growth process with controlled number of layers, high crystalline quality, and on inexpensive substrates is still challenging. Here, we report the synthesis details of PtSe2 layers on soda lime glass substrates by selenization of predeposited Pt layers using the thermally assisted conversion method at atmospheric pressure. PtSe2 syntheses are confirmed by X-ray photoelectron spectroscopy and Raman analysis. The layers were further investigated with transmission electron microscopy and optical ellipsometry, revealing the thickness and its dependence on the metal precursor sputtering time. Finally, the integration of PtSe2 as transparent conductive layers in polymer-dispersed liquid crystal structures operating as near-infrared light shutters is demonstrated and device performance is discussed. The proposed simple and inexpensive synthesis approach opens up new directions toward PtSe2 potential technological applications, including ITO-free optoelectronics.

Experimental Demonstration of a Magnetically Induced Warping Transition in a Topological Insulator Mediated by Rare-Earth Surface Dopants.

Magnetic topological insulators constitute a novel class of materials whose topological surface states (TSSs) coexist with long-range ferromagnetic order, eventually breaking time-reversal symmetry. The subsequent bandgap opening is predicted to co-occur with a distortion of the TSS warped shape from hexagonal to trigonal. We demonstrate such a transition by means of angle-resolved photoemission spectroscopy on the magnetically rare-earth (Er and Dy) surface-doped topological insulator Bi2Se2Te. Signatures of the gap opening are also observed. Moreover, increasing the dopant coverage results in a tunable p-type doping of the TSS, thereby allowing for a gradual tuning of the Fermi level toward the magnetically induced bandgap. A theoretical model where a magnetic Zeeman out-of-plane term is introduced in the Hamiltonian governing the TSS rationalizes these experimental results. Our findings offer new strategies to control magnetic interactions with TSSs and open up viable routes for the realization of the quantum anomalous Hall effect.

The Effect of Post Deposition Treatment on Properties of ALD Al-Doped ZnO Films.

In this paper, aluminum-doped zinc oxide (ZnO:Al or AZO) thin films are grown using atomic layer deposition (ALD) and the influence of postdeposition UV-ozone and thermal annealing treatments on the films' properties are investigated. X-ray diffraction (XRD) revealed a polycrystalline wurtzite structure with a preferable (100) orientation. The crystal size increase after the thermal annealing is observed while UV-ozone exposure led to no significant change in crystallinity. The results of the X-ray photoelectron spectroscopy (XPS) analyses show that a higher amount of oxygen vacancies exists in the ZnO:Al after UV-ozone treatment, and that the ZnO:Al, after annealing, has a lower amount of oxygen vacancies. Important and practical applications of ZnO:Al (such as transparent conductive oxide layer) were found, and its electrical and optical properties demonstrate high tunability after postdeposition treatment, particularly after UV-Ozone exposure, offers a noninvasive and easy way to lower the sheet resistance values. At the same time, UV-Ozone treatment did not cause any significant changes to the polycrystalline structure, surface morphology, or optical properties of the AZO films.

Anisotropic Optical Response of WTe2 Single Crystals Studied by Ellipsometric Analysis.

In this paper we report the crystal growth conditions and optical anisotropy properties of Tungsten ditelluride (WTe2) single crystals. The chemical vapor transport (CVT) method was used for the synthesis of large WTe2 crystals with high crystallinity and surface quality. These were structurally and morphologically characterized by means of X-ray diffraction, optical profilometry and Raman spectroscopy. Through spectroscopic ellipsometry analysis, based on the Tauc-Lorentz model, we identified a high refractive index value (~4) and distinct tri-axial anisotropic behavior of the optical constants, which opens prospects for surface plasmon activity, revealed by the dielectric function. The anisotropic physical nature of WTe2 shows practical potential for low-loss light modulation at the 2D nanoscale level.

ALD Deposited ZnO:Al Films on Mica for Flexible PDLC Devices.

In this work, highly conductive Al-doped ZnO (AZO) films are deposited on transparent and flexible muscovite mica substrates by using the atomic layer deposition (ALD) technique. AZO-mica structures possess high optical transmittance at visible and near-infrared spectral range and retain low electric resistivity, even after continuous bending of up to 800 cycles. Structure performances after bending tests have been supported by atomic force microscopy (AFM) analysis. Based on performed optical and electrical characterizations AZO films on mica are implemented as transparent conductive electrodes in flexible polymer dispersed liquid crystal (PDLC) devices. The measured electro-optical characteristics and response time of the proposed devices reveal the higher potential of AZO-mica for future ITO-free flexible optoelectronic applications.

Fabrication and spectroscopic characterization of graphene transparent electrodes on flexible cyclo-olefin substrates for terahertz electro-optic applications.

We demonstrate graphene on flexible, low-loss, cyclo-olefin polymer films as transparent electrodes for terahertz electro-optic devices and applications. Graphene was grown by chemical vapor deposition and transferred to cyclo-olefin polymer substrates by the thermal release tape method as layers on an approximate area of 4 cm2. The structural and electromagnetic properties of the graphene samples as well as their spatial variation were systematically mapped by means of µRaman, terahertz time-domain and mid-infrared spectroscopy. Thanks to the small thickness and very low intrinsic absorption of the employed substrates, both high transmittance and conductivity were recorded, demonstrating the suitability of the technique for the fabrication of a new class of transparent and flexible electrodes working in the terahertz spectrum.

Flexible light valves using polymer-dispersed liquid crystals and TiO2/Ag/TiO2 multilayers.

The era of flexible optoelectronics demands development of wearable and bendable structures, foldable touch screens, paper-like displays, and curved and flexible solid-state lighting devices. Here, we demonstrate the fabrication of highly flexible light valves using polymer-dispersed liquid crystal (PDLC) and TiO2/Ag/TiO2 transparent conductive films. TiO2/Ag/TiO2 multilayers were prepared by magnetron sputtering technique on polyethylene terephthalate (PET) substrates at room temperature. By keeping the equivalent TiO2 layers and varying the deposition time of the Ag layer, proper metal nanograins on TiO2 planar plane were formed, providing the best tradeoff between the transmittance, sheet resistance and bending ability. The results are validated by numerical simulations that suggest the best match between the deposition time and individual layer thickness. Based on the performed characteristics of TiO2/Ag/TiO2/PET structures, several flexible light valves are fabricated and characterized. The sheet resistance values of TiO2/Ag/TiO2/PET remain unchanged over 1000 bending cycles. The measured driving voltage and response time values open great potential of TiO2/Ag/TiO2/PET for integration into next-generation ITO-free flexible and stretchable devices.

Manipulating the Topological Interface by Molecular Adsorbates: Adsorption of Co-Phthalocyanine on Bi2Se3.

Topological insulators are a promising class of materials for applications in the field of spintronics. New perspectives in this field can arise from interfacing metal-organic molecules with the topological insulator spin-momentum locked surface states, which can be perturbed enhancing or suppressing spintronics-relevant properties such as spin coherence. Here we show results from an angle-resolved photemission spectroscopy (ARPES) and scanning tunnelling microscopy (STM) study of the prototypical cobalt phthalocyanine (CoPc)/Bi2Se3 interface. We demonstrate that that the hybrid interface can act on the topological protection of the surface and bury the Dirac cone below the first quintuple layer.

Near-infrared sensitive photorefractive device using polymer dispersed liquid crystal and BSO:Ru hybrid structure.

A near-infrared sensitive hybrid device, based on a Ru-doped BSO photorefractive substrate and polymer dispersed liquid crystal (PDLC) layer, is reported. It is found that the photoexcited charge carriers generated in the BSO:Ru substrate create an optically induced space charge field, sufficient to penetrate into the PDLC layer and to re-orient the LC molecules inside the droplets. Beam-coupling measurements at the Bragg regime are performed showing prospective amplification values and high spatial resolution. The proposed structure does not require indium tin oxide (ITO) contacts and alignment layers. Such a device allows all the processes to be controlled by light, thus opening further potential for real-time image processing at the near-infrared range.

Near-infrared properties of Rh-doped Bi12TiO20 crystals for photonic applications.

The effect of Rh doping in Bi(12)TiO(20) (BTO) crystals on the photosensitivity and recording speed at 1064 nm is reported. Response time of 0.1 s is measured during real-time holographic recording without any preliminary treatments. Once the crystal is pre-excited with a green light, the detected response time becomes 0.02 s. A possibility to implement BTO:Rh crystal plate with liquid crystals into a hybrid organic/inorganic device is demonstrated, which opens perspectives for further near-infrared applications.

Quasi-nonvolatile storage in Ru-doped Bi12SiO20 crystals by two-wavelength holography.

Prolonged read-out process of a hologram recorded at near infrared with simultaneous green light exposure is measured in Ru-doped Bi12SiO20 crystal. The experimental results are confirmed by numerical simulations, suggesting two different traps involved in the space-charge transport mechanism. In addition, quasi-permanent holographic recording of image with fast updating speed by using two-wavelength recording is demonstrated.

Real-time holography in ruthenium-doped bismuth sillenite crystals at 1064 nm.

Real-time holographic recording and an improvement of the response time in ruthenium (Ru)-doped Bi(12)SiO(20) (BSO) crystal at 1064 nm is obtained. Using green light pre-exposure, a significant operation speed of 60 ms is achieved. In addition, the ability for image reconstruction is demonstrated in Ru-doped BSO, supporting further applications as reversible media for real-time image processing at the near-IR spectral range.