Neat DODAB vesicles: Effect of sonication time on the phase transition thermodynamic parameters and its relation with incomplete chain freezing.

Vesicle solutions formed by the cationic lipid dioctadecyldimethylammonium bromide have been extensively used in the past 20 years as model membrane systems. Often, discrepancies are found in the literature for the thermodynamic parameters of the gel-to-liquid crystal (gel-lc) phase transition of these vesicles. In this work we present a systematic DSC investigation on the influence of the sonication method on the main temperature and enthalpy of the transition for DODAB vesicles, prepared both in normal and deuterated water. It is shown that as the sonication time increases, the T(m) and enthalpy values decrease until a plateau value is reached. This effect is associated with incomplete chain crystallization in the highly curved vesicles (produced by sonication) when they are cooled below the transition temperature. The effect of aging on the sonicated solutions has also been monitored by DSC.

DNA conformational dynamics in the presence of catanionic mixtures.

DNA conformational behavior in the presence of non-stoichiometric mixtures of two oppositely charged surfactants, cetyltrimethylammonium bromide and sodium octyl sulfate, was directly visualized in an aqueous solution with the use of a fluorescence microscopy technique. It was found that in the presence of cationic-rich catanionic mixtures, DNA molecules exhibit a conformational transition from elongated coil to compact globule states. Moreover, if the catanionic mixtures form positively charged vesicles, DNA is adsorbed onto the surface of the vesicles in a collapsed globular form. When anionic-rich catanionic mixtures are present in the solution, no change in the DNA conformational behavior was detected. Cryogenic transmission electron microscopy, as well as measurements of translational diffusion coefficients of individual DNA chains, supported our optical microscopy observations.

Corticosteroids for reversal of myopic regression after photorefractive keratectomy.

With the aim of reversing myopic regression laser photorefractive keratectomy (PRK) after excimer, the effect of high-dose topical corticosteroids in modulating changes in refraction and corneal transparency was assessed prospectively. Twenty-four eyes of 23 patients (mean preoperative spherical equivalent refraction -7.36 diopters (D); range, -4.12 D to -19.25 D), demonstrating myopic regression ranging between 1.00 D and 6.88 D (mean: 2.64 D), were treated according to the same therapeutic protocol. Changes in corneal haze, corneal topography, and refraction were evaluated over 6 months. Eighteen eyes (78.26%) showed 1.00 D or more reversal of myopic regression. Sixteen eyes (69.56%) regained the attempted correction present when corticosteroids were first stopped (+/- 1.00 D). The difference between mean refraction before reintroducing corticosteroids (-2.64 D; range, -1.00 D to -6.88 D) and when stabilization occurred (-0.60; range, +1.50 D to -4.50 D) was statistically significant (P < 0.01). The improvements in corneal haze and spectacle corrected visual acuity were also significant (both P < 0.01). Stabilization occurred between 1 to 4 months after surgery (mean, 2.22). In five eyes (21.74%) increased intraocular pressure of more than 20 mm Hg were reduced with beta-blockers. Topical corticosteroid therapy can modulate refractive changes after PRK, appearing to reduce myopic regression. However, a longer follow up will be necessary to determine the final refractive outcome of these eyes.

Design, manufacturing, and testing of a paracorporeal pulsatile ventricular assist device: São Paulo Heart Institute VAD.

This paper describes the design of a ventricular assist device (VAD), its manufacturing, and testing. The VAD presented is pulsatile, with a free-floating membrane, smooth internal surfaces, and pericardial valves. It comprehends also a pneumatic driving unit capable of operating in the "full to empty," EKG synchronized or asynchronous modes. In vitro tests were performed to assess its mechanical durability, hydrodynamic performance, and hemolysis. To optimize cannulas and implant techniques, we performed in vivo tests in 22 sheep and 8 calves. In these tests, we also evaluated hemolysis and the device's capacity to normalize hemodynamic parameters during induced cardiac failure. The VAD worked for 4,000 h without failure in a mock circulatory loop. In full to empty mode, it displayed a rate-mediated "Starling-like" performance. Optimum output was achieved with a systole duration of 40% of the cycle. The in vitro hemolysis index (IH) was 6.7 +/- 2.1. Hemolysis in animal experiments was clinically nonsignificant. In calves with induced cardiac failure, the VAD was able to normalize hemodynamic parameters within 120 min.

Blood compatibility of tubular polymeric materials studied by biological surface interactions.

Tubular polymeric materials modified by radiation techniques can be used as vascular prosthesis and components of prosthetic devices. The biological interaction between these materials and blood was studied by in vitro and ex vivo methods. Silicone rubber tubes were copolymerized with acrylamide and N-vinylpyrrolidone by radiation-grafting techniques. The irradiation was performed with gamma-rays from a 60Co source at a constant dose rate (0.2 kGy/h) for various time intervals (4-15 h). To evaluate the antithrombogenicity of the grafted tubes, the surface adsorption of 125I-albumin and 125I-fibrinogen was studied. All graft copolymers show a preference for albumin, and the degree of preference appears to correlate with antithrombogenic tendency. In the ex vivo experiment with animals, tubes were implanted in the carotid artery of dogs and the blood flow in the graft copolymers was detected with an ultrasonic flow meter. The blood flow rate in the ungrafted implants decreased more rapidly (stopped completely after 15 to 210 min) compared to the flow rate in the grafted ones (decreased slowly from 38 to 35 ml/min and 70 to 60 ml/min). There was a direct relationship between both methods in the study of blood compatibility of the materials. The results suggest that the graft copolymers can be used as biomaterials for long-term use in cardiovascular systems.

Blood compatibility of tubular polymeric materials studied by biological surface interactions

Tubular polymeric materials modified by radiation techniques can be used as vascular prosthesis and components of prosthetic devices. The biological interction between these materials and blood was studied by in vitro and ex vivo methods. Silicone rubber tubes were copolymerized with acrylamide and N-vinylpyrrolidone by radiation-grafting techniques. The irradiation was performed with y-rays from a 60Co source at a constant dose rate (0.2 kGy/h) for various time intervals (4-15 h). To evaluate the antithrombogenicity of the grafted tubes, the surface adsorption of 125I-albumin and 125I-fibrinogen was studied. All graft copolymers show a preference for albumin, and the degree of preference appears to correlate with antithrombogenic tendency. In the ex vivo experiment with animals, tubes were implanted in the carotid artery of dogs and the blood flow in the graft copolymers was detected with an ultrasonic flow meter. The blood flow rate in the ungrafted implants decreased more rapidly (stopped completely after 15 to 210 min) compared to the flow rate in the grafted ones (decreased slowly from 38 to 35 ml/min and 70 to 60 ml/min). There was a direct relationship between both methods in the study of blood compatibility of the materials. The results suggest that the graft copolymers can be used as biomaterials for long-term use in cardiovascular systems

[Design, manufacturing, and testing of a pulsatile ventricular assist device]. / Projeto, construção e testes de um dispositivo de assistência ventricular pulsátil.

PURPOSE: To describe the design of a ventricular assist device (VAD), its manufacturing and testing. METHODS: The VAD is pulsatile, with a free floating membrane, smooth internal surfaces, and pericardium valves. It comprises also a pneumatic driving unit capable of operating in the "full to empty", EKG synchronized or asynchronous modes. The system was tested "in vitro" to assess its mechanical durability, hydrodynamic performance and hemolysis. "In vivo" tests were performed in 22 sheep and 8 calves aiming at optimizing cannulas and implant techniques. In these experiments, hemolysis and the device's capacity of restoring to normal hemodynamic parameters during induced cardiac failure were evaluated. RESULTS: The device was worked 4,000 hours without failure in a mock circulatory loop. Hydrodynamic performance was satisfactory for adult circulatory support. In "full to empty" mode it displayed a frequency mediated "Starling like" performance. Optimum output was achieved with a systole duration of 40% of the cycle. "In vitro" hemolysis index was 6.7 +/- 2.1. Hemolysis in animal experiments was clinically non significant. In calves under induced cardiac failure the VAD was able to normalize hemodynamic parameters within 120 minutes. CONCLUSION: This VAD is capable to circulatory assist for cardiogenic shock in conditions needed for an adult patient and the average time span anticipated for bridge to transplantation or post cardiotomy cardiogenic shock.

Thermographic study of laser on arteries.

We analyzed the different effects of CO2, Nd-YAG, and argon lasers on aorta by using a Thermovision infrared system that registered the laser interaction with mongrel dog aorta. The images (thermograms) obtained were processed by a computer, which associated each area of the same temperature with a determined color. These thermograms were compared to histological analysis of the respective samples and the following results were obtained: (1) After the application of each laser there is very little propagation of heat in tissue. (2) The CO2 laser makes tissue reach 100 degrees C in less than 0.05 seconds. (3) The heat dissipation time was higher with the Nd-YAG laser due to higher scattering on tissue. Based on this research we conclude that the CO2 laser was best absorbed, the Nd-YAG laser penetrated human tissue with the best results, and the argon laser had the most significant backscattering.