High-Pressure Microfluidics for Ultra-Fast Microbial Phenotyping.

Here, we present a novel methodology based on high-pressure microfluidics to rapidly perform temperature-based phenotyping of microbial strains from deep-sea environments. The main advantage concerns the multiple on-chip temperature conditions that can be achieved in a single experiment at pressures representative of the deep-sea, overcoming the conventional limitations of large-scale batch metal reactors to conduct fast screening investigations. We monitored the growth of the model strain Thermococcus barophilus over 40 temperature and pressure conditions, without any decompression, in only 1 week, whereas it takes weeks or months with conventional approaches. The results are later compared with data from the literature. An additional example is also shown for a hydrogenotrophic methanogen strain (Methanothermococcus thermolithotrophicus), demonstrating the robustness of the methodology. These microfluidic tools can be used in laboratories to accelerate characterizations of new isolated species, changing the widely accepted paradigm that high-pressure microbiology experiments are time-consuming.

Continuous Segmented-Flow Synthesis of Ag and Au Nanoparticles Using a Low Cost Microfluidic PTFE Tubing Reactor.

We present in here a simple and low cost continuous segmented-flow process for the synthesis of Ag and Au spherical-shaped nanoparticles. Different residence times (RT) were used to perform the nanoparticle synthesis, observing that at low RT, the Ag nanoparticles production, which uses a fast reduction reaction with NaBH4, is improved due to an enhancement in the mixing of the reactants. However, the flow conditions have an opposite effect in the case of Au nanoparticles synthesis. Indeed, since the chemical reduction process (Turkevich method) exhibit a much slower kinetics, high RT (low flowrates) improve the synthesis yield and the quality of the nanoparticles. The Ag and Au nanoparticles were characterized by UV-Vis spectrophotometry (UV-Vis) and Transmission Electron Microscopy (TEM). The Ag spherical-shaped nanoparticles presented a LSPR at 400 nm (size ≈ 4 nm), while the synthesized Au nanoparticles exhibit LSPR and sizes in the range 520 - 550 nm and 14 - 17 nm, respectively.

Chemistry Platform for the Ultrafast Continuous Synthesis of High-Quality III-V Quantum Dots.

A chemistry platform for the fast continuous synthesis of III-V quantum dots is demonstrated. III-nitride QDs are prepared by using short residence times (less than 30 s) in a one-step continuous process with supercritical solvents. GaN QDs prepared via this route exhibit strong UV photoluminescence with a structuring of the emission signal at low temperature (5 K), confirming their high quality. An example of metal site substitution is given with the synthesis of Inx Ga1-x N solid solution. A continuous bandgap shift towards lower energies is demonstrated when increasing the indium content with strong photoluminescence signals from UV to visible. The chemistry platform proposed could be easily extrapolated to binary and ternary III phosphides or arsenides with the homologous V source.

One-Step Synthesis of Spin Crossover Nanoparticles Using Flow Chemistry and Supercritical CO2.

Switchable materials are increasingly considered for implementation in devices or multifunctional composites leading to a strong need in terms of reliable synthetic productions of well-defined objects. Here, an innovative and robust template-free continuous process was developed to synthesize nanoparticles of a switchable coordination polymer, including the use of supercritical CO2 , aiming at both quenching the particle growth and drying the powder. This all-in-one process offers a 12-fold size reduction in a few minutes while maintaining the switching properties of the selected spin crossover coordination polymer.

Anodic bonding of mid-infrared transparent germanate glasses for high pressure - high temperature microfluidic applications.

High pressure/high-temperature microreactors based on silicon-Pyrex® microfabrication technologies have attracted increasing interest in various applications providing optical access in high-pressure flow processes. However, they cannot be coupled to infrared spectroscopy due to the limited optical transparency (up to ~2.7 µm in the infrared region) of the Pyrex® glass substrate employed in the microreactor fabrication. To address this limitation, the alternative approach proposed in this work consists in replacing the Pyrex® glass in the microreactor by a mid-infrared transparent glass with thermal and mechanical properties as close as possible or even better to those of the Pyrex®, including its ability for silicon-wafers coupling by the anodic bonding process. Glasses based on germanate GeO2, known for their excellent transmission in the mid-infrared range and thermal/thermo-mechanical properties, have been thus evaluated and developed for this purpose. The optical, mechanical, thermal and electrical conductivity properties of adapted glass compositions belonging to five vitreous systems have been systemically investigated. The glass composition 70GeO2-15Al2O3-10La2O3-5Na2O (mol.%) was defined as the best candidate and produced in large plates of 50 mm diameter and 1 mm thickness. Anodic bonding tests with Si-wafers have been then successfully conducted, paving the way for the development of fully mid-infrared transparent silicon-glass microreactors.

Elaboration of soft porous ultrasound insulators.

A simple and easy way is proposed for the fabrication of a highly attenuating composite material for underwater acoustics. The approach involves the introduction of porous polymer beads into a polyurethane matrix. The porous beads are prepared through an emulsion-templating approach, and two different processes are used. The first one uses microfluidics to synthesize beads of controlled diameter and porosity. The control over the bead size allows the selection of the frequency range where the material exhibits the highest acoustic attenuation. The second one uses a double emulsion approach and allows for the production of much larger quantities of beads. Both approaches yield materials exhibiting much higher acoustic absorption than the one obtained using the most commonly used micro-balloon inclusion. We present both the synthesis procedures and the structural and acoustic characterizations of the beads and the final acoustic materials.

Microfluidics and Surface-Enhanced Raman Spectroscopy: A Perfect Match for New Analytical Tools.

In this perspective article, we emphasize the combination of Surface-Enhanced Raman Spectroscopy (SERS) and Microfluidic devices. SERS approaches have been widely studied and used for multiple applications including trace molecules detection, in situ analysis of biological samples and monitoring or, all of them with good results, however still with limitations of the technique, for example regarding with improved precision and reproducibility. These implications can be overcome by microfluidic approaches. The resulting coupling Microfluidics - SERS (MF-SERS) has recently gained increasing attention by creating thundering opportunities for the analytical field. For this purpose, we introduce some of the strategies developed to implement SERS within microfluidic reactor along with a brief overview of the most recent MF-SERS applications for biology, health and environmental concerns. Eventually, we will discuss future research opportunities of such systems.

Nanostructured materials for photocatalysis.

Photocatalysis is a green technology which converts abundantly available photonic energy into useful chemical energy. With a rapid rise of flow photoreactors in the last decade, the design and development of novel semiconductor photocatalysts is happening at a blistering rate. Currently, developed synthetic approaches have allowed the design of diverse modified/unmodified semiconductor materials exhibiting enhanced performances in heterogeneous photocatalysis. In this review, we have classified the so far reported highly efficient modified/unmodified semiconductor photocatalysts into four different categories based on the elemental composition, band gap engineering and charge carrier migration mechanism in composite photocatalysts. The recent synthetic developments are reported for each novel semiconductor photocatalyst within the four different categories, namely: pure semiconductors, solid solutions, type-II heterojunction nanocomposites and Z-scheme. The motivation behind the synthetic upgrading of modified/unmodified (pure) semiconductor photocatalysts along with their particular photochemical applications and photoreactor systems have been thoroughly reviewed.

Nanofiber-Directed Anisotropic Self-Assembly of CdSe-CdS Quantum Rods for Linearly Polarized Light Emission Evidenced by Quantum Rod Orientation Microscopy.

Hybrid soft materials composed of CdSe-CdS nanorods or "quantum rods" (QRs) and the fluorescent 2,3-didecyloxyanthracene (DDOA) low molecular weight organogelator are obtained through self-assembly. Spectroscopy, microscopy, and rheology studies show that the QRs and DDOA coassemble, thereby stabilizing the organogels. Depending on the QR load and excitation wavelength, single nanofibers (NFs) of the hybrid gel display either sharp polarized red luminescence (under green excitation), or dual perpendicularly polarized blue and red emissions (under UV excitation). Transmission electron microscopy, microspectroscopy, and quantum rod orientation microscopy (QROM) reveal that QRs align along the organogel NFs with order parameters reaching 76% and 87%. This paves the way for obtaining surfaces of QR/NF assemblies yielding sharp red linearly polarized emission. In addition, this work demonstrates that QRs can be used more generally to probe nanostructured soft materials, even nonemissive ones. QROM allows to establish maps of the orientation of single QRs dispersed onto or within a gel network by measuring the polarization of the emission of the individual QRs. As occurs within this work in which QRs and NFs interact, the orientation of each QR reveals information on the underlying nanostructure (such as surface striation, bundle formation, and helicity).

High Yield Synthesis of Aspect Ratio Controlled Graphenic Materials from Anthracite Coal in Supercritical Fluids.

This paper rationalizes the green and scalable synthesis of graphenic materials of different aspect ratios using anthracite coal as a single source material under different supercritical environments. Single layer, monodisperse graphene oxide quantum dots (GQDs) are obtained at high yield (55 wt %) from anthracite coal in supercritical water. The obtained GQDs are ∼3 nm in lateral size and display a high fluorescence quantum yield of 28%. They show high cell viability and are readily used for imaging cancer cells. In an analogous experiment, high aspect ratio graphenic materials with ribbon-like morphology (GRs) are synthesized from the same source material in supercritical ethanol at a yield of 6.4 wt %. A thin film of GRs with 68% transparency shows a surface resistance of 9.3 kΩ/sq. This is apparently the demonstration of anthracite coal as a source for electrically conductive graphenic materials.

Effect of Thermal Treatment on the Textural Properties of CeO2 Powders Synthesized in Near- and Supercritical Alcohols.

CeO2 nanocrystals (NCs) have attracted increasing interest over the past few years, in particular for their use in catalytic reactions. Syntheses mediated by near- and supercritical alcohols have proven to be innovative ways to obtain CeO2 NCs with controlled crystallite sizes (from 3 to 8 nm depending on the alcohol) and surface functionalities, with alcohol moieties. When submitted to a thermal treatment at 500 °C, required to desorb/degrade surface organic species, these powders displayed different behaviors depending on the alcohol used during the synthesis. Cerium oxide powders synthesized in sc-MeOH, sc-EtOH and sc-iPrOH undergo sintering during treatment at 500 °C, with a decrease of their specific surface area. Conversely, those synthesized in sc-BuOH, nc-PentOH and nc-HexOH keep their initial crystallite sizes and morphology, but show a great enhancement of their specific surface area (up to 200 m(2) g(-1)), which is unprecedented after such a thermal treatment.

Implementation of in situ SAXS/WAXS characterization into silicon/glass microreactors.

A successful implementation of in situ X-ray scattering analysis of synthetized particle materials in silicon/glass microreactors is reported. Calcium carbonate (CaCO3) as a model material was precipitated inside the microchannels through the counter-injection of two aqueous solutions, containing carbonate ions and calcium ions, respectively. The synthesized calcite particles were analyzed in situ in aqueous media by combining Small Angle X-ray Scattering (SAXS) and Wide Angle X-ray Scattering (WAXS) techniques at the ESRF ID02 beam line. At high wavevector transfer, WAXS patterns clearly exhibit different scattering features: broad scattering signals originating from the solvent and the glass lid of the chip, and narrow diffraction peaks coming from CaCO3 particles precipitated rapidly inside the microchannel. At low wavevector transfer, SAXS reveals the rhombohedral morphology of the calcite particles together with their micrometer size without any strong background, neither from the chip nor from the water. This study demonstrates that silicon/glass chips are potentially powerful tools for in situ SAXS/WAXS analysis and are promising for studying the structure and morphology of materials in non-conventional conditions like geological materials under high pressure and high temperature.

Microfluidic supercritical antisolvent continuous processing and direct spray-coating of poly(3-hexylthiophene) nanoparticles for OFET devices.

We report for the first time the use of a microfluidic supercritical antisolvent process (µSAS) to synthesize semiconducting polymer nanoparticles (NPs) of poly(3-hexylthiophene) (P3HT). Solvent-free P3HT NPs with average diameters as small as 36 ± 8 nm are obtained. They are continuously spray-coated on substrates to fabricate OFET devices, demonstrating hole mobility through the nanoparticle film equivalent to that of conventional spin-coated P3HT.

A microfluidic approach for investigating multicomponent system thermodynamics at high pressures and temperatures.

In this work, we present a novel microfluidic-based approach for investigating the thermodynamics of multicomponent systems at high pressures and temperatures, such as determining miscibility diagrams and critical coordinates of complex mixtures. The developed method is primarily based on (i) bubble and dew point detection through optical characterization and (ii) the use of a so-called dynamic stop-flow measurement mode for fast screening of the diagram parameters, mainly P, T and composition. Our strategy was validated through the studies of model binary CO2-alkane mixtures. The obtained results were then compared to PREOS-calculated and literature data. We later applied this strategy for determining ternary and quaternary mixtures critical coordinates. This approach has equal accuracy compared to conventional high-pressure optical cell methods but allows for a much faster phase diagram determination, taking advantage of improved heat and mass transfers on the microscale and of the dynamic stop-flow approach.

CeO2 nanocrystals from supercritical alcohols: new opportunities for versatile functionalizations?

The fast and controlled synthesis of surface-modified cerium oxide nanoparticles was carried out in supercritical {ethanol + alcohol derivative} mixtures. The newly found ability of supercritical alcohols to graft onto cerium oxide nanocrystals (CeO2 NCs) during their synthesis was exploited to control their surface chemistry via the addition of three aminoalcohols: ethanolamine, 3-amino-1-propanol and 6-amino-1-hexanol. Although the ethanol to aminoalcohol ratio was consistent (285:1), the successful grafting of these alcohol derivatives onto CeO2 NCs was identified based on Fourier transform infrared (FTIR) and thermogravimetric analysis-mass spectrometry (TGA-MS) measurements. Smaller crystallite size of CeO2 NCs synthesized in the presence of aminoalcohols, compared to those synthesized in supercritical ethanol alone, were also noticed and attributed to a possible intervention of amine groups helping the grafting of the alcohols, allowing one to stop the growth of the CeO2 NCs faster. The use of supercritical alcohol mixture-ethanol with hexanol, dodecanol, or octadecanol, with a 285:1 ratio-was also investigated. Such mixtures allow accessing a finer control in CeO2 NCs crystallite size compared to pure alcohols, according to calculation made from X-ray diffraction measurements. Finally, fluorescent molecules (fluorescein isothiocyanate) were grafted onto amine-modified CeO2 NCs. The powders displayed a fluorescent behavior under UV light, confirming the suitability and interest of CeO2 NCs surface modification by such technique.

Continuous coflow synthesis of hybrid palladium nanocrystals as catalysts for borylation reaction.

The combination of highly active Pd nanocrystal (NC) types with tailored surface properties (various ligands) - e.g. organic-inorganic hybrid NCs - as catalysts opens avenues towards new synthetic pathways, implying a faster practical alternative for adjusting and screening the reaction conditions. Pd@dppf and Pd@PCy3 NCs have been successfully prepared via a continuous supercritical fluid assisted coflow route with promising results as catalysts in borylation reaction. It has been found that the ligands not only influence the catalytic properties of the systems, but also contribute to Pd metal core characteristics (size, shape and time stability).

Ultrafast and continuous synthesis of crystalline ferrite nanoparticles in supercritical ethanol.

Magnetic nanoparticles (NPs) are of increasing interest in various industrially relevant products. For these, the development of greener and faster approaches facilitating scaling-up production is of paramount importance. Here, we report a novel, green and potentially scalable approach for the continuous and ultrafast (90 s) synthesis of superparamagnetic ferrite NPs (MnFe(2)O(4), Fe(3)O(4)) in supercritical ethanol (scEtOH) at a fairly moderate temperature (260 °C). ScEtOH exhibits numerous advantages such as its production from bio-resources, its lack of toxicity and its relatively low supercritical coordinates (p(c) = 6.39 MPa and T(c) = 243 °C), being therefore appropriate for the development of sustainable technologies. The present study is completed by the investigation of both in situ and ex situ NP surface functionalization. The as-obtained nanoparticles present good crystallinity, sizes below 8 nm, superparamagnetic behavior at room temperature and high saturation magnetization. Moreover, depending on the capping strategy, the ferrite NPs present extended (for in situ coated NPs) or short-term (for ex situ coated NPs) colloidal stability.

Near- and supercritical alcohols as solvents and surface modifiers for the continuous synthesis of cerium oxide nanoparticles.

Supercritical fluids offer fast and facile routes toward well-crystallized tailor-made cerium oxide nanoparticles. However, the use of surfactants to control morphology and surface properties remains essential. Therefore, although water, near-critical (nc) or supercritical (sc), is a solvent of choice, the poor water solubility of some surfactants could require other solvent systems such as alcohols, which could themselves behave as surface modifiers. In here, the influence of seven different alcohols, MeOH, EtOH, PrOH, iPrOH, ButOH, PentOH, and HexOH, in alcothermal conditions (300 °C, 24.5 MPa) over CeO(2) nanocrystals (NCs) size, morphology, and surface properties was investigated. The crystallite size of the CeO(2) nanocrystals can be tuned in the range 3-7 nm depending on the considered alcohol, and their surface has been modified by these solvents without the use of surfactants. Mechanisms are proposed for the interaction of primary and secondary alcohols with CeO(2) surface and its functionalization during the synthesis based on FTIR and TGA-MS studies. This study allows apprehending the role of alcohols during the synthesis and may lead to an informed choice of solvent as a function of the required size and surface properties of CeO(2) NCs. It also opens new route to CeO(2) functionalization using supercritical alcohol derivatives.

Microfluidic synthesis of palladium nanocrystals assisted by supercritical CO2: tailored surface properties for applications in boron chemistry.

On the surface: A library of organic-inorganic hybrid palladium nanocrystals was synthesized using continuous supercritical microfluidic technology. The nanocatalysts show moderate to excellent activities towards C(Ar)-B and C(Ar)-C(Ar) bond-forming reactions, thus illustrating the relationship between surface properties and modulated catalytic activity.