Assessment of modeled mercury dry deposition over the Great Lakes region.

Three sets of model predicted values for speciated mercury concentrations and dry deposition fluxes over the Great Lakes region were assessed using field measurements and model intercomparisons. The model predicted values were produced by the Community Multiscale Air Quality Modeling System for the year 2002 (CMAQ2002) and for the year 2005 (CMAQ2005) and by the Global/Regional Atmospheric Heavy Metals Model for the year 2005 (GRAHM2005). Median values of the surface layer ambient concentration of gaseous elemental mercury (GEM) from all three models were generally within 30% of measurements. However, all three models overpredicted surface-layer concentrations of gaseous oxidized mercury (GOM) and particulate bound mercury (PBM) by a factor of 2-10 at the majority of the 15 monitoring locations. For dry deposition of GOM plus PBM, CMAQ2005 showed a clear gradient with the highest deposition in Pennsylvania and its surrounding areas while GRAHM2005 showed no such gradient in this region; however, GRAHM2005 had more hot spots than those of CMAQ2005. Predicted dry deposition of GOM plus PBM from these models should be treated as upper-end estimates over some land surfaces in this region based on the tendencies of all the models to overpredict GOM and PBM concentrations when compared to field measurements. Model predicted GEM dry deposition was found to be as important as GOM plus PBM dry deposition as a contributor to total dry deposition. Predicted total annual mercury dry deposition were mostly lower than 5 µg m(-2) to the surface of the Great lakes, between 5 and 15 µg m(-2) to the land surface north of the US/Canada border, and between 5 and 40 µg m(-2) to the land surface south of the US/Canada border. Predicted dry deposition from different models differed from each other by as much as a factor of 2 at regional scales and by a greater extent at local scales.

[Mathematical simulation of biomechanical background of osteophyte formation in cervical vertebra]. / Matematický model biomechanického pozadí osteodegenerativního procesu krcního obratle.

PURPOSE OF THE STUDY: The aim of this study was to simulate different types of cervical vertebra loading and to find out whether mechanical stress would concentrate in regions known in clinical practice as predilection sites for osteophyte formation. The objective was to develop a theoretical model that would elucidate clinical observations concerning the predilection site of bone remodelling in view of the physiological changes inside the cervical vertebral body. MATERIAL AND METHODS: A real 3D-geometry of the fourth cervical vertebra had been made by the commercially available system ATOS II. This is a high-resolution measuring system using principles of optical triangulation. This flexible optical measuring machine projects fringe patterns on the surface of a selected object and the pattern is observed with two cameras. 3D coordinates for each camera pixel were calculated with high precision and a polygon mesh of the object's surface was further generated. In the next step an ANSYS programme was used to calculate strains and stresses in each finite element of the virtual vertebra. The applied forces used in the experiment corresponded in both magnitude and direction to physiological stress. Mechanical loading in neutral position was characterized by a distribution of 80% mechanical stress to the vertebral body and 10% to each of the zygoapophyseal joints. Hyperlordotic loading was simulated by 60% force transfer to the vertebral body end-plate and 20% to each of the small joint while kyphotic loading involved a 90% load on the vertebral body endplate and 5% on each facet. RESULTS: Mechanical stress distribution calculated in a neutral position of the model correlated well with bone mineral distribution of a healthy vertebra, and verified the model itself. The virtual mechanical loading of a vertebra in kyphotic position concentrated deformation stress into the uncinate processes and the dorsal apophyseal rim of the vertebral body. The simulation of mechanical loading in hyperlordosis, on the other hand, shifted the region of maximum deformation into the articulation process of the Z-joint. All locations are known as areas of osteophyte formation in degenerated cervical vertebrae. DISCUSSION AND CONCLUSIONS: The theoretical model developed during this study corresponded well with human spine behaviour in terms of predilection sites for osteodegenerative changes, as observed in clinical practice. A mathematical simulation of mechanical stress distribution in pre-operative planning may lead to the optimisation of post-operative anatomical relationship between adjacent vertebrae. Such improvement in our surgical practice may further reduce the incidence of degenerative changes in adjacent motion segments of the cervical spine and possibly also lead to better subjective and clinical results after cervical spine reconstruction.

Computation of bone remodelling after Duracon knee arthroplasty using a thermodynamic-based model.

The present study utilizes a recently developed literature model for the bone remodelling process to predict the evolution of bone density following Duracon total knee arthroplasty (TKA). In this model, which is based on chemical kinetics and irreversible thermodynamics, bone is treated as a self-organizing system capable of exchanging matter, energy, and entropy with its surroundings. Unlike previous models in which mechanical loading is regarded as the only stimulus for bone remodelling, the present model establishes a unique coupling between mechanical loading and the chemical reactions involved in the process of bone remodelling. This model was incorporated into the finite element software ANSYS by means of a macro to compute density distribution in distal femoral bone both before and after TKA. Consistent with dual-energy X-ray absorptiometry (DEXA) scans reported in the literature, the results showed that the most severe bone loss occurs in the anterior region of the distal femur and that there is more bone resorption in the lateral than the medial condyle following TKA. Furthermore, the bone density distribution predicted using the present model showed a gradual and uniform pattern and thus a more realistic bone evolution contrary to the strain energy density model, where there is no gradual bone density evolution.

Scaling non-point-source mercury emissions from two active industrial gold mines: influential variables and annual emission estimates.

Open-pit gold mines encompass thousands of hectares of disturbed materials that are often naturally enriched in mercury (Hg). The objective of this study was to estimate annual non-point-source Hg emissions from two active gold mines in Nevada. This was achieved by measuring diel and seasonally representative Hg fluxes from mesocosms of materials collected from each mine. These measurements provided a framework for scaling emissions over space and time at each mine by identifying the important variables correlated with Hg flux. The validity of these correlations was tested by comparisons with measurements conducted in situ at the mines. Of the average diel fluxes obtained in situ (92 daily flux measurements), 81% were within the 95% prediction limits of the regressions developed from the laboratory-derived data. Some surfaces at the mines could not be simulated in the laboratory setting (e.g., material actively leached by cyanide solution and tailings saturated with cyanide solution), and as such in situ data were applied for scaling. Based on the surface areas of the materials and environmental conditions at the mines during the year of study, non-point-source Hg releases were estimated to be 19 and 109 kg·year(-1). These account for 56% and 14%, respectively, of the overall emissions from each mine (point + nonpoint sources). Material being heap-leached and active tailings impoundments were the major contributors to the releases (>60% combined) suggesting that as mining operations cease, releases will decline.

Measurement of surface mercury fluxes at active industrial gold mines in Nevada (USA).

Mercury (Hg) may be naturally associated with the rock units hosting precious and base metal deposits. Active gold mines are known to have point source releases of Hg associated with ore processing facilities. The nonpoint source release of Hg to the air from the large area (hundreds to thousands of hectares) of disturbed and processed material at industrial open pit gold mines has not been quantified. This paper describes the field data collected as part of a project focused on estimating nonpoint source emissions of Hg from two active mines in Nevada, USA. In situ Hg flux data were collected on diel and seasonal time steps using a dynamic flux chamber from representative mine surfaces. Hg fluxes ranged from <1500 ng m(-2) day(-1) for waste rock piles (0.6-3.5 µg g(-1)) to 684,000 ng m(-2) day(-1) for tailings (2.8-58 µg g(-1)). Releases were positively correlated with material Hg concentrations, surface grain size, and moisture content. Highest Hg releases occurred from materials under active cyanide leaching and from tailings impoundments containing processed high-grade ore. Data collected indicate that as mine sites are reclaimed and material disturbance ceases, emissions will decline. Additionally local cycling of atmospheric Hg (deposition and re-emission) was found to occur.

A thermodynamic model of bone remodelling: the influence of dynamic loading together with biochemical control.

Understanding of the bone remodelling process has considerably increased during the last 20 years. Since the ability to simulate (and predict) the effects of bone remodelling offers substantial insights, several models have been proposed to describe this phenomenon. The strength of the presented model is that it includes biochemical control factors (e.g., the necessity of cell-to-cell contact, which is mediated by the RANKL-RANK-OPG chain during osteoclastogenesis) and mechanical stimulation, the governing equations are derived from interaction kinetics (e.g., mass is preserved in running reactions), and the parameters are measurable. Behaviour of the model is in accordance with experimental and clinical observations, such as the role of dynamic loading, the inhibitory effect of dynamic loading on osteoclastogenesis, the observation that polykaryon osteoclasts are activated and formed by a direct cell-to-cell contact, and the correct concentrations of osteoblasts, osteoclasts, and osteocytes. The model does not yet describe the bone remodelling process in complete detail, but the implemented simplifications describe the key features and further details of control mechanisms may be added.

Three-dimensional finite element computer model of the forward problem of electrocardiology.

This study analyses forward problem of electrocardiology. Premature beats originated from subepicardial layer of myocardium were simulated in order to analyse their shape dependence on the site of origin. The equation governing the propagation of the electrical wave through human thorax together with transition and boundary conditions is derived under the clearly stated simplifying assumptions. The weak formulation of the forward problem of electrocardiology is introduced, too. The Galerkin method as a convenient tool for looking for the numerical solution is mentioned and its practical implementation--finite element method--then used in order to obtain numerical results. The obtained results were presented in the form of isopotential maps and compared with actually measured body surface isopotential maps of the depolarization phase. The parameters of the model were then optimalized in accordance with the measured data. In spite of the lack of quantitative data the model has proved that the presented method was able to be used for the simulation studies of ventricular ectopic beats. It was shown that only a small difference between the site of beat origin can be well distinguished on the simulated body surface maps. (Fig. 3, Ref. 3.)

A comparison of two commercially irradiated Trypticase Soy Agars containing lecithin and polysorbate 80.

Gamma-radiation sterilized Trypticase Soy Agar containing lecithin and polysorbate 80 (TSA++) (Becton Dickinson Microbiology Systems, Cockeysville, MD) and irradiated TSA++ (Adams Scientific, West Warwick, RI) were tested by a quantitative spread plate method. Four bacteria Bacillus subtilis ATCC 6633, Pseudomonas aeruginosa ATCC 10145, Staphylococcus aureus ATCC 25923, Streptococcus pyogenes ATCC 19615 and the yeast Candida albicans ATCC 10231 were tested in two separate experiments using different lots of media. A strain of Aspergillus niger ATCC 16404, was tested by a qualitative streak plate method. The Becton Dickinson Microbiology Systems (BDMS) irradiated TSA++ overall recovered a greater number of organisms than the Adams Scientific TSA++ in both experiments and allowed for the earlier recovery of S. pyogenes ATCC 19615. The growth of A. niger ATCC 16404, was comparable on both media. Efficacy of the media to neutralize 1, 2 and 3% phenol as well as 0.001, 0.01 and 0.1% benzalkonium chloride (BC) solutions was done by a disk diffusion method using 2 gram-positive and 4 gram-negative bacteria. Both media showed complete neutralization of the 0.001 and 0.01% BC solutions and partial neutralization of the 0.1% BC solution. The BDMS TSA++ showed better neutralization of the 2 and 3% phenol solutions than the Adams Scientific TSA++. This data indicates that not all irradiated TSA++ media perform in an equivalent manner.

Evaluation of the variety of plasmid profiles in S epidermidis isolates from hospital patients and staff.

Plasmid profiling was used to determine the variability of normal flora isolates of Staphylococcus epidermidis in order to evaluate the usefulness of plasmid profiling for identifying pathogens. Fifteen hospital staff members and patients repeatedly had cultures taken from the hands and nares, and multiple isolates were examined for plasmid profiles. S epidermidis isolated from the nares of 15 neonates were also examined. The total number of isolates examined for plasmid profiles was 726. Repetition of profiles was common among the different isolates from a single sampling (one swab). The frequency of re-isolating similar profiles on different days varied from 7% to 13%. Simultaneous isolation of similar profiles from nares and hands on the same individual varied from 0% to 11%, the percentage being lower for personnel. Isolation of the same plasmid profile from different individuals occurred only twice and resulted in an assignment probability of Pa = 0.002 for isolates obtained from different individuals. Significantly more isolates from nares contained plasmids (97%) compared with isolates from hands (89%). Patients who had two or more isolates of coagulase-negative staphylococci with similar profiles were judged, clinically, to have infections in 12 of 13 cases. However, the likelihood of re-isolating an S epidermidis strain with a similar plasmid profile twice from the same person at different times was sufficiently high to prevent plasmid profiling from being used as an absolute criterion for infection.

Use of the leukocyte esterase and nitrite tests to determine the need for culturing urine specimens from a pediatric and adolescent population.

Using a commercially available dip stick 601 urine specimens were screened for leukocytes and bacteria by testing for the presence of leukocyte esterase and nitrite. The screening method was found to have a sensitivity of 88.7% and a predictive value of negative results of 98.5%.

Analysis of antibiotic stability in a parenteral nutrition solution.

In children receiving multiple antibiotics and total parenteral nutrition (TPN), the amount of nutrition received can be less than optimal if the central venous line is used for administration of blood products, antibiotics and other medications. The purpose of this study was to evaluate the compatibility of commonly used antibiotics in our standard hyperalimentation solution to determine whether these drugs could be administered in a "piggyback" fashion with parenteral nutrition. If there were no incompatibility this could allow significantly more TPN to be delivered without need for extra fluid in patients receiving antibiotics several times daily. We found 13 antibiotics (amikacin, azlocillin, cefamandole, cephalothin, gentamicin, mezlocillin, moxalactam, nafcillin, oxacillin, penicillin, piperacillin, ticarcillin and tobramycin) to be stable for 6 hours and compatible with the TPN solution. They could be safely given in the presence of the hyperalimentation preparation (1.5% amino acid, 15% dextrose, vitamins, calcium (300 mg/liter) and standard electrolyte concentrations).

Aeromonas hydrophila colitis in a child.

A 5-year-old girl presented with chronic bloody diarrhea. Evaluation including sigmoidoscopy, rectal biopsy, and barium enema was consistent with the diagnosis of ulcerative colitis. Culture of the stool grew Aeromonas hydrophila. A. hydrophila colitis may be more common than presently realized.

Cerebral blastomycosis: an immunodiagnostic study.

Cerebral blastomycosis may simulate a brain tumor. Its diagnosis is sometimes very difficult. The morphologic identification of the fungus may be misleading because it shares some common features with many other dimorphic fungi. Culturing and conversion of the organism from mycelial phase to yeast phase are not always successful. Immunofluorescent staining of the biopsy tissue is useful in confirming the diagnosis. However, a combination of double immunodiffusion (DID) test and complement fixation (CF) test makes the diagnosis more accurate and reliable. The direct role of macrophages in defending the host against blastomycosis is illustrated by electron microscopy.

Species identification and susceptibility to 17 antibiotics of coagulase-negative staphylococci isolated from clinical specimens.

A total of 299 isolates of gram-positive, catalase-positive, coagulase-negative cocci were isolated from a variety of specimens collected from patients at a large university hospital, and 281 (94%) were identified as staphylococci by established methods. Using the scheme of Kloos and Schleifer, we determined the species of the coagulase-negative staphylococci. Staphylococcus epidermidis was the cause of all bacteremias and the most commonly isolated species from bone, joint, and wound infections. Staphylococcus haemolyticus was the second most common isolate from wound infections, and Staphylococcus saprophyticus was the most commonly isolated species from urinary tract infections. Antibiograms to 17 antimicrobial agents were performed by a microdilution technique, and the results revealed that S. epidermidis was resistant to a water spectrum of antimicrobial agents than the other species of staphylococci were.

Comparison of a rapid micromedia method to cystine trypticase agar (CTA) and fluorescent methods for the identification of pathogenic Neisseria.

A four-hour micromedia method which detects enzymes formed by bacteria for the degradion of carbohydrates was compared to the utilization of carbohydrates was compared to the utilization of carbohydrates in cystine tyrpticase agar (CTA) for the identification of Neisseria gonorrhoeae and Neisseria meningitidis. This rapid micromedia method (RMM) correlated 100% with the utilization of carbohydrates in CTA. Identification of N. gonorrhoeae by RMM was compared to the identification achieved by a commercially available coagglutination method and a fluorescent antibody (FA) technique. Of 144 isolates identified as N. gonorrhoeae by RMM, 122 (84.7%) were identified by coagglutination and 141 (97.9%) were identified by FA as N. gonorrhoeae. Five (13%) of 40 isolates identified as N. meningitidis by RMM were identified as N. gonorrhoeae by coagglutination while eleven (28%) were identified as N. gonorrhoeae by the FA technique. One (14%) and four (57%) of seven isolates identified as Neisseria species were identified as N. gonorrhoeae by coagglutination and the FA technique respectively. The rapid micromedia method was found to be a quick, sensitive, specific and economic way of identifying N. gonorrhoeae and N. meningitidis.

In-use testing of four glutaraldehyde disinfectants in the Cidematic washer.

Four glutaraldehyde disinfectants (Cidex, Glutarex, Sonacide, and Sporicidin) were tested in routine use in the Cidematic washer to identify the most economic, effective disinfectant among them. An in vitro killing test with Pseudomonas aeruginosa (10-min exposure) and Mycobacterium smegmatis (20-min exposure) was used. All four disinfectants were effective prior to first use. In the use tests, Cidex killed both organisms for its claimed effectiveness period of 2 weeks. Glutarex was effective against Pseudomonas for its claimed effectiveness period of 4 weeks but was effective against Mycobacterium only 3 weeks. Sonacide, claimed to be effective for 4 weeks, killed Pseudomonas for 2 weeks but was ineffective against Mycobacterium after 1 week. Sporicidin (1:15 dilution), claimed to be effective for 30 days, did not kill either test organism after 5 days. Glutarex used for a 3-week period was found to be the most economic, effective substitute for Cidex in the Cidematic machine.