Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed.

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 µg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

Revealing unbound ß-diketiminate anions: structural dynamics from caesium complexes.

This study reports the first structural elucidation of ß-diketiminate anions (BDI-), known for strong coordination, in their unbound form within caesium complexes. ß-Diketiminate caesium salts (BDICs) were synthesised, and upon the addition of Lewis donor ligands, free BDI- anions and donor-solvated Cs+ cations were observed. Notably, the liberated BDI- anions exhibited an unprecedented dynamic cisoid-transoid exchange in solution.

Photofunctional Scope of Fluorescent Dithienylethene Conjugates with Aza-Heteroaromatic Cations.

A series of dithienylethene (DTE) photoswitches with aza-heteroaromatic cationic moieties is synthesized. The switches are characterized regarding their photochemical and photophysical properties in acetonitrile and in water. The efficiency of the switching and the photostationary state composition depend on the degree of π-conjugation of the heteroaromatic systems. Thus, DTEs with acridinium-derived moieties have very low quantum yields for the ring-closing process, which is in contrast to switches with pyridinium and quinolinium moieties. All switches emit fluorescence in their open forms. The involved electronic transitions are traced back to an integrative picture including the DTE core and the cationic arms. The emission can be fine-tuned by the π-conjugation of the heteroaromatic cations, reaching the red spectral region for DTEs with acridinium moieties. On ring-closing of the DTEs the fluorescence is not observable anymore. Theoretical calculations point to rather low-lying energy levels of the highly conjugated ring-closed DTEs, which would originate near-infrared emission (> 1200 nm). The latter is predicted to be very weak due to the concurrent non-radiative deactivation, according to the energy-gap law. In essence, an ON-OFF fluorescence switching as the result of the electrocyclic ring-closing reaction is observed.

Inverse Isotope Effects in Single-Crystal to Single-Crystal Reactivity and the Isolation of a Rhodium Cyclooctane σ-Alkane Complex.

The sequential solid/gas single-crystal to single-crystal reaction of [Rh(Cy2P(CH2)3PCy2)(COD)][BArF 4] (COD = cyclooctadiene) with H2 or D2 was followed in situ by solid-state 31P{1H} NMR spectroscopy (SSNMR) and ex situ by solution quenching and GC-MS. This was quantified using a two-step Johnson-Mehl-Avrami-Kologoromov (JMAK) model that revealed an inverse isotope effect for the second addition of H2, that forms a σ-alkane complex [Rh(Cy2P(CH2)3PCy2)(COA)][BArF 4]. Using D2, a temporal window is determined in which a structural solution for this σ-alkane complex is possible, which reveals an η2,η2-binding mode to the Rh(I) center, as supported by periodic density functional theory (DFT) calculations. Extensive H/D exchange occurs during the addition of D2, as promoted by the solid-state microenvironment.

Organotelluroxane molecular clusters assembled via Te⋯X- (X = Cl-, Br-) chalcogen bonding anion template interactions.

The synthesis and characterisation of two novel molecular organotelluroxane clusters, comprising of an inorganic Te8O6X4 (X = Cl, Br) core structure are described. The integration of highly electron withdrawing 3,5-bis-trifluoromethylphenyl groups to the constituent Te(IV) centres is determined to be crucial in the chalcogen bonding (ChB) halide template directed assembly. Characterised by multi-nuclear 1H, 125Te, 19F NMR, UV-Vis, IR spectroscopies and X-ray crystal structure analysis, the discrete molecular clusters exhibit excellent organic solvent solubility and remarkable chemical stability. Furthermore, preliminary fluorescence investigations reveal the telluroxanes exhibit aggregation induced emission (AIE) behaviour in organic aqueous solvent mixtures.

Ortho-aryl substituted DPEphos ligands: rhodium complexes featuring C-H anagostic interactions and B-H agostic bonds.

The synthesis of new Schrock-Osborn Rh(i) pre-catalysts with ortho-substituted DPEphos ligands, [Rh(DPEphos-R)(NBD)][BArF 4] [R = Me, OMe, iPr; ArF = 3,5-(CF3)2C6H3], is described. Along with the previously reported R = H variant, variable temperature 1H NMR spectroscopic and single-crystal X-ray diffraction studies show that these all have axial (C-H)⋯Rh anagostic interactions relative to the d8 pseudo square planar metal centres, that also result in corresponding downfield chemical shifts. Analysis by NBO, QTAIM and NCI methods shows these to be only very weak C-H⋯Rh bonding interactions, the magnitudes of which do not correlate with the observed chemical shifts. Instead, as informed by Scherer's approach, it is the topological positioning of the C-H bond with regard to the metal centre that is important. For [Rh(DPEphos-iPr)(NBD)][BArF 4] addition of H2 results in a Rh(iii) iPr-C-H activated product, [Rh(κ3,σ-P,O,P-DPEphos-iPr')(H)][BArF 4]. This undergoes H/D exchange with D2 at the iPr groups, reacts with CO or NBD to return Rh(i) products, and reaction with H3B·NMe3/tert-butylethene results in a dehydrogenative borylation to form a complex that shows both a non-classical B-H⋯Rh 3c-2e agostic bond and a C-H⋯Rh anagostic interaction at the same metal centre.

A Series of Crystallographically Characterized Linear and Branched σ-Alkane Complexes of Rhodium: From Propane to 3-Methylpentane.

Using solid-state molecular organometallic (SMOM) techniques, in particular solid/gas single-crystal to single-crystal reactivity, a series of σ-alkane complexes of the general formula [Rh(Cy2PCH2CH2PCy2)(ηn:ηm-alkane)][BArF4] have been prepared (alkane = propane, 2-methylbutane, hexane, 3-methylpentane; ArF = 3,5-(CF3)2C6H3). These new complexes have been characterized using single crystal X-ray diffraction, solid-state NMR spectroscopy and DFT computational techniques and present a variety of Rh(I)···H-C binding motifs at the metal coordination site: 1,2-η2:η2 (2-methylbutane), 1,3-η2:η2 (propane), 2,4-η2:η2 (hexane), and 1,4-η1:η2 (3-methylpentane). For the linear alkanes propane and hexane, some additional Rh(I)···H-C interactions with the geminal C-H bonds are also evident. The stability of these complexes with respect to alkane loss in the solid state varies with the identity of the alkane: from propane that decomposes rapidly at 295 K to 2-methylbutane that is stable and instead undergoes an acceptorless dehydrogenation to form a bound alkene complex. In each case the alkane sits in a binding pocket defined by the {Rh(Cy2PCH2CH2PCy2)}+ fragment and the surrounding array of [BArF4]- anions. For the propane complex, a small alkane binding energy, driven in part by a lack of stabilizing short contacts with the surrounding anions, correlates with the fleeting stability of this species. 2-Methylbutane forms more short contacts within the binding pocket, and as a result the complex is considerably more stable. However, the complex of the larger 3-methylpentane ligand shows lower stability. Empirically, there therefore appears to be an optimal fit between the size and shape of the alkane and overall stability. Such observations are related to guest/host interactions in solution supramolecular chemistry and the holistic role of 1°, 2°, and 3° environments in metalloenzymes.

Chalcogen Bonding Ion-Pair Cryptand Host Discrimination of Potassium Halide Salts.

A series of chalcogen, halogen and hydrogen bonding heteroditopic macrobicyclic cryptands are reported and their potassium halide ion-pair recognition properties investigated. Saliently, the co-bound potassium cation was determined to be crucial in switching on the bromide and iodide recognition properties of the respective cryptand receptor. Importantly, the nature of the sigma-hole mediated interaction employed in the anion recognition component is demonstrated to significantly augment the ion-pair binding behaviour, markedly so for the halogen bonding analogue. Most notably the incorporation of a chelating chalcogen bonding donor motif significantly improves the selectivity towards KBr over KI, relative to halogen and hydrogen bonding analogues.

η2-Alkene Complexes of [Rh(PONOP-iPr)(L)]+ Cations (L = COD, NBD, Ethene). Intramolecular Alkene-Assisted Hydrogenation and Dihydrogen Complex [Rh(PONOP-iPr)(η-H2)].

Rhodium-alkene complexes of the pincer ligand κ3-C5H3N-2,6-(OPiPr2)2 (PONOP-iPr) have been prepared and structurally characterized: [Rh(PONOP-iPr)(η2-alkene)][BArF4] [alkene = cyclooctadiene (COD), norbornadiene (NBD), ethene; ArF = 3,5-(CF3)2C6H3]. Only one of these, alkene = COD, undergoes a reaction with H2 (1 bar), to form [Rh(PONOP-iPr)(η2-COE)][BArF4] (COE = cyclooctene), while the others show no significant reactivity. This COE complex does not undergo further hydrogenation. This difference in reactivity between COD and the other alkenes is proposed to be due to intramolecular alkene-assisted reductive elimination in the COD complex, in which the η2-bound diene can engage in bonding with its additional alkene unit. H/D exchange experiments on the ethene complex show that reductive elimination from a reversibly formed alkyl hydride intermediate is likely rate-limiting and with a high barrier. The proposed final product of alkene hydrogenation would be the dihydrogen complex [Rh(PONOP-iPr)(η2-H2)][BArF4], which has been independently synthesized and undergoes exchange with free H2 on the NMR time scale, as well as with D2 to form free HD. When the H2 addition to [Rh(PONOP-iPr)(η2-ethene)][BArF4] is interrogated using pH2 at higher pressure (3 bar), this produces the dihydrogen complex as a transient product, for which enhancements in the 1H NMR signal for the bound H2 ligand, as well as that for free H2, are observed. This is a unique example of the partially negative line-shape effect, with the enhanced signals that are observed for the dihydrogen complex being explained by the exchange processes already noted.

Structural and metal-halogen exchange reactivity studies of sodium magnesiate biphenolate complexes.

Bimetallic sodium magnesiates have been employed in metal-halogen exchange for the first time. Utilising the racemic phenoxide ligand 5,5',6,6'-tetramethyl-3,3'-di-tert-butyl-1,1'-biphenyl-2,2'-diol [(rac)-BIPHEN-H2], the dialkyl sodium magnesiates [(rac)-BIPHEN]Na2MgBu2(TMEDA)23 and [(rac)-BIPHEN]Na2MgBu2(PMDETA)24 have been synthesised. Both 3 and 4 can be easily prepared through co-complexation of di-n-butylmagnesium with the sodiated (rac)-BIPHEN precursor which can be prepared in situ in hydrocarbon solvent. Prior to the main investigation, synthesis of the sodiated precursor [BIPHEN]2Na4(THF)41 was explored in order to better understand the formation of sodium magnesiates utilising the dianionic (rac)-BIPHEN ligand as the parent ligand. In addition, a BIPHEN-rich sodium magnesiate [BIPHEN]2Na2Mg(THF)42 was prepared and characterised, and its formation was rationalised. Complex 1 and 4 have also been fully characterised in both solid and solution state. In terms of onward reactivity, 3 and 4 have been tested as potential exchange reagents with aryl and heteroaryl iodides to produce aryl and heteroaryl magnesium phenoxides utilising toluene as a non-polar hydrocarbon solvent. Complex 3 reacted smoothly to give a range of aryl and heteroaryl magnesium phenoxides, whilst 4's reactivity is more sluggish.

Solid-State Molecular Organometallic Catalysis in Gas/Solid Flow (Flow-SMOM) as Demonstrated by Efficient Room Temperature and Pressure 1-Butene Isomerization.

The use of solid-state molecular organometallic chemistry (SMOM-chem) to promote the efficient double bond isomerization of 1-butene to 2-butenes under flow-reactor conditions is reported. Single crystalline catalysts based upon the σ-alkane complexes [Rh(R2PCH2CH2PR2)(η2η2-NBA)][BArF 4] (R = Cy, tBu; NBA = norbornane; ArF = 3,5-(CF3)2C6H3) are prepared by hydrogenation of a norbornadiene precursor. For the tBu-substituted system this results in the loss of long-range order, which can be re-established by addition of 1-butene to the material to form a mixture of [Rh(tBu2PCH2CH2PtBu2)(cis-2-butene)][BArF 4] and [Rh(tBu2PCH2CH2PtBu2)(1-butene)][BArF 4], in an order/disorder/order phase change. Deployment under flow-reactor conditions results in very different on-stream stabilities. With R = Cy rapid deactivation (3 h) to the butadiene complex occurs, [Rh(Cy2PCH2CH2PCy2)(butadiene)][BArF 4], which can be reactivated by simple addition of H2. While the equivalent butadiene complex does not form with R = tBu at 298 K and on-stream conversion is retained up to 90 h, deactivation is suggested to occur via loss of crystallinity of the SMOM catalyst. Both systems operate under the industrially relevant conditions of an isobutene co-feed. cis:trans selectivites for 2-butene are biased in favor of cis for the tBu system and are more leveled for Cy.

Tolerant to air σ-alkane complexes by surface modification of single crystalline solid-state molecular organometallics using vapour-phase cationic polymerisation: SMOM@polymer.

Vapour-phase surface-initiated cationic polymerisation of ethylvinylether occurs at single-crystals of the σ-alkane complex [Rh(Cy2PCH2CH2PCy2)(NBA)][BArF4]. This new surface interface makes these normally very air sensitive materials tolerant to air, while also allowing for onward single-crystal to single-crystal reactivity at metal sites within the lattice.

A Structurally Characterized Cobalt(I) σ-Alkane Complex.

A cobalt σ-alkane complex, [Co(Cy2 P(CH2 )4 PCy2 )(norbornane)][BArF 4 ], was synthesized by a single-crystal to single-crystal solid/gas hydrogenation from a norbornadiene precursor, and its structure was determined by X-ray crystallography. Magnetic data show this complex to be a triplet. Periodic DFT and electronic structure analyses revealed weak C-H→Co σ-interactions, augmented by dispersive stabilization between the alkane ligand and the anion microenvironment. The calculations are most consistent with a η1 :η1 -alkane binding mode.

The role of neutral Rh(PONOP)H, free NMe2H, boronium and ammonium salts in the dehydrocoupling of dimethylamine-borane using the cationic pincer [Rh(PONOP)(η2-H2)]+ catalyst.

The σ-amine-borane pincer complex [Rh(PONOP)(η1-H3B·NMe3)][BArF4] [2, PONOP = κ3-NC5H3-2,6-(OPtBu2)2] is prepared by addition of H3B·NMe3 to the dihydrogen precursor [Rh(PONOP)(η2-H2)][BArF4], 1. In a similar way the related H3B·NMe2H complex [Rh(PONOP)(η1-H3B·NMe2H)][BArF4], 3, can be made in situ, but this undergoes dehydrocoupling to reform 1 and give the aminoborane dimer [H2BNMe2]2. NMR studies on this system reveal an intermediate neutral hydride forms, Rh(PONOP)H, 4, that has been prepared independently. 1 is a competent catalyst (2 mol%, ∼30 min) for the dehydrocoupling of H3B·Me2H. Kinetic, mechanistic and computational studies point to the role of NMe2H in both forming the neutral hydride, via deprotonation of a σ-amine-borane complex and formation of aminoborane, and closing the catalytic cycle by reprotonation of the hydride by the thus-formed dimethyl ammonium [NMe2H2]+. Competitive processes involving the generation of boronium [H2B(NMe2H)2]+ are also discussed, but shown to be higher in energy. Off-cycle adducts between [NMe2H2]+ or [H2B(NMe2H)2]+ and amine-boranes are also discussed that act to modify the kinetics of dehydrocoupling.

Reversible Encapsulation of Xenon and CH2 Cl2 in a Solid-State Molecular Organometallic Framework (Guest@SMOM).

Reversible encapsulation of CH2 Cl2 or Xe in a non-porous solid-state molecular organometallic framework of [Rh(Cy2 PCH2 PCy2 )(NBD)][BArF4 ] occurs in single-crystal to single-crystal transformations. These processes are probed by solid-state NMR spectroscopy, including 129 Xe SSNMR. Non-covalent interactions with the -CF3 groups, and hydrophobic channels formed, of [BArF4 ]- anions are shown to be important, and thus have similarity to the transport of substrates and products to and from the active site in metalloenzymes.

A Potent Halogen-Bonding Donor Motif for Anion Recognition and Anion Template Mechanical Bond Synthesis.

The covalent attachment of electron deficient perfluoroaryl substituents to a bis-iodotriazole pyridinium group produces a remarkably potent halogen bonding donor motif for anion recognition in aqueous media. Such a motif also establishes halogen bonding anion templation as a highly efficient method for constructing a mechanically interlocked molecule in unprecedented near quantitative yield. The resulting bis-perfluoroaryl substituted iodotriazole pyridinium axle containing halogen bonding [2]rotaxane host exhibits exceptionally strong halide binding affinities in competitive 50 % water containing aqueous media, by a factor of at least three orders of magnitude greater in comparison to a hydrogen bonding rotaxane host analogue. These observations further champion and advance halogen bonding as a powerful tool for recognizing anions in aqueous media.

Selective mono- and dimetallation of a group 3 sandwich complex.

The scandium Cp/COT hybrid sandwich compound [(η5-C5H5)Sc(η8-C8H8)] is resistant to metallation via conventional alkyllithium and lithium amide bases. In this work, clean, selective, stoichiometric and high-yielding mono- and dimetallation is accomplished using tandem trans-metal-trapping (TMT) involving LiTMP and iBu2AlTMP with deprotonation occurring selectively at the Cp and Cp/COT rings respectively, providing the first examples of selective metallation of a sandwich complex featuring a group 3 element.

A d10 Ag(i) amine-borane σ-complex and comparison with a d8 Rh(i) analogue: structures on the η1 to η2:η2 continuum.

H3B·NMe3 σ-complexes of d8 [(L1)Rh][BArF4] and d10 [(L1)Ag][BArF4] (where L1 = 2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine) have been prepared and structurally characterised. Analysis of the molecular and electronic structures reveal important but subtle differences in the nature of the bonding in these σ-complexes, which differ only by the identity of the metal centre and the d-electron count. With Rh the amine-borane binds in an η2:η2 fashion, whereas at Ag the unsymmetrical {AgH3B·NMe3} unit suggests a structure lying between the η2:η2 and η1 extremes.

Solvent-free anhydrous Li+, Na+ and K+ salts of [B(3,5-(CF3)2C6H3)4]-, [BArF4]-. Improved synthesis and solid-state structures.

A modified, convenient, preparation of solvent-free, anhydrous, Li+, Na+ and K+ salts of the ubiquitous [BArF4]- anion is reported, that involves a simple additional recrystallisation step. Anhydrous Na[BArF4], K[BArF4], and [Li(H2O)][BArF4], were characterised by single-crystal X-ray diffraction.

Modulation of σ-Alkane Interactions in [Rh(L2)(alkane)]+ Solid-State Molecular Organometallic (SMOM) Systems by Variation of the Chelating Phosphine and Alkane: Access to η2,η2-σ-Alkane Rh(I), η1-σ-Alkane Rh(III) Complexes, and Alkane Encapsulation.

Solid/gas single-crystal to single-crystal (SC-SC) hydrogenation of appropriate diene precursors forms the corresponding σ-alkane complexes [Rh(Cy2P(CH2) nPCy2)(L)][BArF4] ( n = 3, 4) and [ RhH(Cy2P(CH2)2( CH)(CH2)2PCy2)(L)][BArF4] ( n = 5, L = norbornane, NBA; cyclooctane, COA). Their structures, as determined by single-crystal X-ray diffraction, have cations exhibiting Rh···H-C σ-interactions which are modulated by both the chelating ligand and the identity of the alkane, while all sit in an octahedral anion microenvironment. These range from chelating η2,η2 Rh···H-C (e.g., [Rh(Cy2P(CH2) nPCy2)(η2η2-NBA)][BArF4], n = 3 and 4), through to more weakly bound η1 Rh···H-C in which C-H activation of the chelate backbone has also occurred (e.g., [ RhH(Cy2P(CH2)2( CH)(CH2)2PCy2)(η1-COA)][BArF4]) and ultimately to systems where the alkane is not ligated with the metal center, but sits encapsulated in the supporting anion microenvironment, [Rh(Cy2P(CH2)3PCy2)][COA⊂BArF4], in which the metal center instead forms two intramolecular agostic η1 Rh···H-C interactions with the phosphine cyclohexyl groups. CH2Cl2 adducts formed by displacement of the η1-alkanes in solution ( n = 5; L = NBA, COA), [ RhH(Cy2P(CH2)2( CH)(CH2)2PCy2)(κ1-ClCH2Cl)][BArF4], are characterized crystallographically. Analyses via periodic DFT, QTAIM, NBO, and NCI calculations, alongside variable temperature solid-state NMR spectroscopy, provide snapshots marking the onset of Rh···alkane interactions along a C-H activation trajectory. These are negligible in [Rh(Cy2P(CH2)3PCy2)][COA⊂BArF4]; in [ RhH(Cy2P(CH2)2( CH)(CH2)2PCy2)(η1-COA)][BArF4], σC-H → Rh σ-donation is supported by Rh → σ*C-H "pregostic" donation, and in [Rh(Cy2P(CH2) nPCy2)(η2η2-NBA)][BArF4] ( n = 2-4), σ-donation dominates, supported by classical Rh(dπ) → σ*C-H π-back-donation. Dispersive interactions with the [BArF4]- anions and Cy substituents further stabilize the alkanes within the binding pocket.