Fluorescent Nanocomposite Hydrogels Based on Conjugated Polymer Nanoparticles as Platforms for Alkaline Phosphatase Detection.

This work describes the development and characterization of fluorescent nanocomposite hydrogels, with high swelling and absorption capacity, and prepared using a green protocol. These fluorescent materials are obtained by incorporating, for the first time, polyfluorenes-based nanoparticles with different emission bands-poly[9,9-dioctylfluorenyl-2,7-diyl] (PFO) and poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(1,4-benzo-{2,1,3}-thiadiazole)] (F8BT)-into a three-dimensional polymeric network based on polyacrylamide. To this end, two strategies were explored: incorporation of the nanoparticles during the polymerization process (in situ) and embedment after the hydrogel formation (ex situ). The results show that the combination of PFO nanoparticles introduced by the ex situ method provided materials with good storage stability, homogeneity and reproducibility properties, allowing their preservation in the form of xerogel. The fluorescent nanocomposite hydrogels have been tested as a transportable and user-friendly sensing platform. In particular, the ability of these materials to specifically detect the enzyme alkaline phosphatase (ALP) has been evaluated as a proof-of-concept. The sensor was able to quantify the presence of the enzyme in an aqueous sample with a response time of 10 min and LOD of 21 nM. Given these results, we consider that this device shows great potential for quantifying physiological ALP levels as well as enzyme activity in environmental samples.

Portable Alkaline Phosphatase-Hydrogel Platform: From Enzyme Characterization to Phosphate Sensing.

Here, we present a study on the incorporation and characterization of the enzyme alkaline phosphatase (ALP) into a three-dimensional polymeric network through a green protocol to obtain transparent hydrogels (ALP@AETA) that can be stored at room temperature and potentially used as a disposable biosensor platform for the rapid detection of ALP inhibitors. For this purpose, different strategies for the immobilization of ALP in the hydrogel were examined and the properties of the new material, compared to the hydrogel in the absence of enzyme, were studied. The conformation and stability of the immobilized enzyme were characterized by monitoring the changes in its intrinsic fluorescence as a function of temperature, in order to study the unfolding/folding process inside the hydrogel, inherently related to the enzyme activity. The results show that the immobilized enzyme retains its activity, slightly increases its thermal stability and can be stored as a xerogel at room temperature without losing its properties. A small portion of a few millimeters of ALP@AETA xerogel was sufficient to perform enzymatic activity inhibition assays, so as a proof of concept, the device was tested as a portable optical biosensor for the detection of phosphate in water with satisfactory results. Given the good stability of the ALP@AETA xerogel and the interesting applications of ALP, not only in the environmental field but also as a therapeutic enzyme, we believe that this study could be of great use for the development of new devices for sensing and protein delivery.

Disposable Electrochemical Biosensor Based on the Inhibition of Alkaline Phosphatase Encapsulated in Acrylamide Hydrogels.

The present work describes the development of an easy-to-use portable electrochemical biosensor based on alkaline phosphatase (ALP) as a recognition element, which has been immobilized in acrylamide-based hydrogels prepared through a green protocol over disposable screen-printed electrodes. To carry out the electrochemical transduction, an electroinactive substrate (hydroquinone diphosphate) was used in the presence of the enzyme and then it was hydrolyzed to an electroactive species (hydroquinone). The activity of the protein within the matrix was determined voltammetrically. Due to the adhesive properties of the hydrogel, this was easily deposited on the surface of the electrodes, greatly increasing the sensitivity of the biosensor. The device was optimized to allow the determination of phosphate ion, a competitive inhibitor of ALP, in aqueous media. Our study provides a proof-of-concept demonstrating the potential use of the developed biosensor for in situ, real-time measurement of water pollutants that act as ALP inhibitors.

Formation of Multicolor Nanogels Based on Cationic Polyfluorenes and Poly(methyl vinyl ether-alt-maleic monoethyl ester): Potential Use as pH-Responsive Fluorescent Drug Carriers.

In this study, we employed the copolymer poly(methyl vinyl ether-alt-maleic monoethyl ester) (PMVEMA-Es) and three fluorene-based cationic conjugated polyelectrolytes to develop fluorescent nanoparticles with emission in the blue, green and red spectral regions. The size, Zeta Potential, polydispersity, morphology, time-stability and fluorescent properties of these nanoparticles were characterized, as well as the nature of the interaction between both PMVEMA-Es and fluorescent polyelectrolytes. Because PMVEMA-Es contains a carboxylic acid group in its structure, the effects of pH and ionic strength on the nanoparticles were also evaluated, finding that the size is responsive to pH and ionic strength, largely swelling at physiological pH and returning to their initial size at acidic pHs. Thus, the developed fluorescent nanoparticles can be categorized as pH-sensitive fluorescent nanogels, since they possess the properties of both pH-responsive hydrogels and nanoparticulate systems. Doxorubicin (DOX) was used as a model drug to show the capacity of the blue-emitting nanogels to hold drugs in acidic media and release them at physiological pH, from changes in the fluorescence properties of both nanoparticles and DOX. In addition, preliminary studies by super-resolution confocal microscopy were performed, regarding their potential use as image probes.

Reusable Fluorescent Nanobiosensor Integrated in a Multiwell Plate for Screening and Quantification of Antidiabetic Drugs.

A highly stable and reusable fluorescent multisample nanobiosensor for the detection of α-glucosidase inhibitors has been developed by coupling fluorescent liposomal nanoparticles based on conjugated polymers (L-CPNs) to the enzyme α-glucosidase, one of the main target enzymes in the treatment of type 2 diabetes. The mechanism of sensing is based on the fluorescence "turn-on" of L-CPNs by p-nitrophenol (PNP), the end product of the enzymatic hydrolysis of p-nitrophenyl-α-d-glucopyranoside. L-CPNs, composed of lipid vesicles coated with a blue-emitting cationic polyfluorene, were designed and characterized to obtain a good response to PNP. Two nanobiosensor configurations were developed in this study. In the first step, a single-sample nanobiosensor composed of L-CPNs and α-glucosidase entrapped in a sol-gel glass was developed in order to characterize and optimize the device. In the second part, the nanobiosensor was integrated and adapted to a multiwell microplate and the possibility of reusing it and performing multiple measurements simultaneously with samples containing different α-glucosidase inhibitors was investigated. Using super-resolution confocal microscopy, L-CPNs could be visualized within the sol-gel matrix, and the quenching of their fluorescence, induced by the substrate, was directly observed in situ. The device was also shown to be useful not only as a platform for screening of antidiabetic drugs but also for quantifying their presence. The latter application was successfully tested with the currently available drug, acarbose.

The Interaction of Temozolomide with Blood Components Suggests the Potential Use of Human Serum Albumin as a Biomimetic Carrier for the Drug.

The interaction of temozolomide (TMZ) (the main chemotherapeutic agent for brain tumors) with blood components has not been studied at the molecular level to date, even though such information is essential in the design of dosage forms for optimal therapy. This work explores the binding of TMZ to human serum albumin (HSA) and alpha-1-acid glycoprotein (AGP), as well as to blood cell-mimicking membrane systems. Absorption and fluorescence experiments with model membranes indicate that TMZ does not penetrate into the lipid bilayer, but binds to the membrane surface with very low affinity. Fluorescence experiments performed with the plasma proteins suggest that in human plasma, most of the bound TMZ is attached to HSA rather than to AGP. This interaction is moderate and likely mediated by hydrogen-bonding and hydrophobic forces, which increase the hydrolytic stability of the drug. These experiments are supported by docking and molecular dynamics simulations, which reveal that TMZ is mainly inserted in the subdomain IIA of HSA, establishing π-stacking interactions with the tryptophan residue. Considering the overexpression of albumin receptors in tumor cells, our results propose that part of the administered TMZ may reach its target bound to plasma albumin and suggest that HSA-based nanocarriers are suitable candidates for designing biomimetic delivery systems that selectively transport TMZ to tumor cells.

Polyfluorene-Based Multicolor Fluorescent Nanoparticles Activated by Temperature for Bioimaging and Drug Delivery.

Multifunctional nanoparticles have been attracting growing attention in recent years because of their capability to integrate materials with different features in one entity, which leads them to be considered as the next generation of nanomedicine. In this work, we have taken advantage of the interesting properties of conjugated polyelectrolytes to develop multicolor fluorescent nanoparticles with integrating imaging and therapeutic functionalities. With this end, thermosensitive liposomes were coated with three recently synthesized polyfluorenes: copoly-((9,9-bis(6'-N,N,N-trimethylammonium)hexyl)-2,7-(fluorene)-alt-1,4-(phenylene)) bromide (HTMA-PFP), copoly-((9,9-bis(6'-N,N,N-trimethylammonium)hexyl)-2,7-(fluorene)-alt-4,7-(2- (phenyl)benzo(d) (1,2,3) triazole)) bromide (HTMA-PFBT) and copoly-((9,9-bis(6'-N,N,N- trimethylammonium)hexyl)-2,7-(fluorene)-alt-1,4-(naphtho(2,3c)-1,2,5-thiadiazole)) bromide (HTMA-PFNT), in order to obtain blue, green and red fluorescent drug carriers, respectively. The stability, size and morphology of the nanoparticles, as well as their thermotropic behavior and photophysical properties, have been characterized by Dynamic Light Scattering (DLS), Zeta Potential, transmission electron microscope (TEM) analysis and fluorescence spectroscopy. In addition, the suitability of the nanostructures to carry and release their contents when triggered by hyperthermia has been explored by using carboxyfluorescein as a hydrophilic drug model. Finally, preliminary experiments with mammalian cells demonstrate the capability of the nanoparticles to mark and visualize cells with different colors, evidencing their potential use for imaging and therapeutic applications.

Synthesis and Characterization of a Novel Green Cationic Polyfluorene and Its Potential Use as a Fluorescent Membrane Probe.

In the present work, we have synthesized a novel green-emitter conjugated polyelectrolyte Copoly-{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]-2,7-(fluorene)-alt-4,7-(2-(phenyl) benzo[d] [1,2,3] triazole)} bromide (HTMA-PFBT) by microwave-assisted Suzuki coupling reaction. Its fluorescent properties have been studied in aqueous media and in presence of model membranes of different composition, in order to explore its ability to be used as a green fluorescent membrane probe. The polyelectrolyte was bound with high affinity to the membrane surface, where it exhibited high fluorescence efficiency and stability. HTMA-PFBT showed lower affinity to zwitterionic membranes as compared to anionic ones, as well as a more external location, near the membrane-aqueous interface. Fluorescence microscopy studies confirmed the interaction of HTMA-PFBT with the model membranes, labelling the lipid bilayer without perturbing its morphology and showing a clear preference towards anionic systems. In addition, the polyelectrolyte was able to label the membrane of bacteria and living mammalian cells, separately. Finally, we explored if the polyelectrolyte can function also as a sensitive probe able of detecting lipid-phase transitions. All these results suggest the potential use of HTMA-PFBT as a green membrane marker for bioimaging and selective recognition of bacteria cell over mammalian ones and as a tool to monitor changes in physical state of lipid membranes.

Fluorescent Biosensor for Phosphate Determination Based on Immobilized Polyfluorene-Liposomal Nanoparticles Coupled with Alkaline Phosphatase.

This work describes the development of a novel fluorescent biosensor based on the inhibition of alkaline phosphatase (ALP). The biosensor is composed of the enzyme ALP and the conjugated cationic polyfluorene HTMA-PFP. The working principle of the biosensor is based on the fluorescence quenching of this polyelectrolyte by p-nitrophenol (PNP), a product of the hydrolysis reaction of p-nitrophenyl phosphate (PNPP) catalyzed by ALP. Because HTMA-PFP forms unstable aggregates in buffer, with low fluorescence efficiency, previous stabilization of the polyelectrolyte was required before the development of the biosensor. HTMA-PFP was stabilized through its interaction with lipid vesicles to obtain stable blue-emitting nanoparticles (NPs). Fluorescent NPs were characterized, and the ability to be quenched by PNP was evaluated. These nanoparticles were coupled to ALP and entrapped in a sol-gel matrix to produce a biosensor that can serve as a screening platform to identify ALP inhibitors. The components of the biosensor were examined before and after sol-gel entrapment, and the biosensor was optimized to allow the determination of phosphate ion in aqueous medium.

New Red-Emitting Conjugated Polyelectrolyte: Stabilization by Interaction with Biomolecules and Potential Use as Drug Carriers and Bioimaging Probes.

The design and development of fluorescent conjugated polyelectrolytes (CPEs) emitting in the red region of the visible spectrum is at present of great interest for bioimaging studies. However, despite the wide variety of CPEs available, stable bright red-emitters remain scarce due to their low solubility and instability in aqueous media, consequently limiting their applications. In this work, we have synthesized and characterized a new red-emitting cationic conjugated polyelectrolyte copoly-{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]-2,7-(fluorene)-alt-1,4-(naphtho[2,3c]-1,2,5-thiadiazole)} bromide (HTMA-PFNT), based on the incorporation of naphtha[2,3c][1,2,5] thiadiazole on fluorene backbone to increase the bathochromic emission, extending the conjugation length in the polymer backbone. Water stabilization was achieved by binding the polyelectrolyte to two different biological systems which are currently used as nanocarriers: human serum albumin (HSA) and lipid vesicles. Using both systems, stable nanostructures of different composition were obtained and their properties were characterized. The properties of the protein-based nanoparticles are consistent with polyelectrolyte aggregates covered with HSA molecules, while the liposome system is composed of lipid vesicles coated with polyelectrolyte chains partially inserted in the bilayer. Both protein and vesicle structural integrity were not affected after their interaction with HTMA-PFNT, as well as the carrier properties, allowing for the binding and transport of ligands. In addition, the nanoparticles displayed the ability of labeling the cell membrane of living cells. All these results extend the potential applications of these novel multifunctional nanoparticles as therapeutic carriers and bioimaging probes.

Selective Interaction of a Cationic Polyfluorene with Model Lipid Membranes: Anionic versus Zwitterionic Lipids.

This paper explores the interaction mechanism between the conjugated polyelectrolyte {[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]fluorene-phenylene}bromide (HTMA-PFP) and model lipid membranes. The study was carried out using different biophysical techniques, mainly fluorescence spectroscopy and microscopy. Results show that despite the preferential interaction of HTMA-PFP with anionic lipids, HTMA-PFP shows affinity for zwitterionic lipids; although the interaction mechanism is different as well as HTMA-PFP's final membrane location. Whilst the polyelectrolyte is embedded within the lipid bilayer in the anionic membrane, it remains close to the surface, forming aggregates that are sensitive to the physical state of the lipid bilayer in the zwitterionic system. The different interaction mechanism is reflected in the polyelectrolyte fluorescence spectrum, since the maximum shifts to longer wavelengths in the zwitterionic system. The intrinsic fluorescence of HTMA-PFP was used to visualize the interaction between polymer and vesicles via fluorescence microscopy, thanks to its high quantum yield and photostability. This technique allows the selectivity of the polyelectrolyte and higher affinity for anionic membranes to be observed. The results confirmed the appropriateness of using HTMA-PFP as a membrane fluorescent marker and suggest that, given its different behaviour towards anionic and zwitterionic membranes, HTMA-PFP could be used for selective recognition and imaging of bacteria over mammalian cells.

Use of the conjugated polyelectrolyte poly{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]fluorene-phenylene} bromide (HTMA-PFP) as a fluorescent membrane marker.

The present work explores the potential use of the conjugated cationic polyfluorene {[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]fluorene-phenylene} bromide (HTMA-PFP) as a fluorescent membrane marker. To this end, the interaction of the polyelectrolyte with anionic model membranes has been investigated using different biophysical approaches. High affinity interaction was confirmed through alterations in the fluorescence spectrum of HTMA-PFP and by Förster resonance energy transfer (FRET) analysis. Quenching data indicate that once HTMA-PFP interacts with the membrane, it penetrates in the hydrophobic core embedded in the lipid bilayer where it presents high fluorescence quantum yield and photostability. Leakage experiments and dynamic light scattering (DLS) measurements show that the integrity of the lipid vesicles is maintained after polymer incorporation since no vesicle fusion or decomposition into small fragments is detectable. This conclusion is supported by fluorescence microscopy images, which confirm that polyelectrolyte interacts with the vesicle, labeling the lipid membrane without altering its morphology. Further experiments performed as a function of temperature indicate that the polymer is accommodated in the membrane without inducing significant loss of lipid cooperativity and without altering the packing of lipids within the bilayer. Finally, results show that polyelectrolyte fluorescence is sensitive to the large structural changes taking place in the lipid bilayer at the lipid phase transition. All these results confirm the ability of HTMA-PFP to visualize membrane structures and to monitor membrane processes.

Stabilization of neutral polyfluorene in aqueous solution through their interaction with phospholipids and sol-gel encapsulation.

Interaction between poly[9,9-bis(6'-bromohexyl)-2,7-fluorene-co-alt-1,4-phenylene] (PFPBr2), a neutral conjugated polyfluorene which is completely insoluble in water, and zwitterionic phospholipids has been investigated in order to generate new fluorescent structures which are stable in aqueous media as a means of extending the biological applications of these kinds of polymers. Two types of differently shaped and composed fluorescent structures were identified and then isolated and characterized separately using different biophysical techniques. The first structure type, corresponding to liposomal complexes, showed a fluorescence band centered around 405 nm and maximum absorption at 345 nm, while the second, corresponding to polymer-phospholipid aggregates of variable sizes with lower lipid content, absorbed at longer wavelengths and displayed a well resolved fluorescence spectrum with a maximum centered at 424 nm. Both structures were stable in a large range of pH, and their fluorescence intensity remained practically unaltered for 10 days; it then began to decrease, which was probably because of aggregation. Encapsulation of these structures within the pores of a sol-gel matrix did not affect their fluorescent properties but increased their stability, avoiding further aggregation and subsequent precipitation.

Formation and characterization of stable fluorescent complexes between neutral conjugated polymers and cyclodextrins.

Solubilisation and stabilization of conjugated polymers, CPs, in aqueous media remains a challenge for many researches trying to extend the biological and environmental applications of this kind of polymers. A number of different alternatives have been considered to address this problem, which are mostly based on the enhancement of the macromolecule polarity, by appending hydrophilic side chains on the polymer backbone. In this work we have investigated a new strategy in which water solubilization is reached by external addition of classical cyclodextrins (α-, ß- and γ-CDs) to a solution of non-polar CPs. This strategy allows working with such polymers eliminating the need to synthesize new water-soluble species. The polymer selected for the study was poly-[9,9-bis(6'-bromohexyl-2,7-fluoren-dyil)-co-alt-(benzene-1,4-diy)], PFPBr(2), a polyfluorene previously synthesized in our laboratory. Results show that PFPBr(2) forms fluorescent complexes in aqueous media with ß-CD and γ-CD, and much less efficiently with α-CD, probably due to the small size of its cavity. The new PFPBr(2)/CD complexes are stable in time and in a large range of pH, however, at high concentration and temperature, they tend to aggregate and precipitate. In order to increase stabilization and minimize polymer aggregation, complexes were encapsulated inside the pores of silica glasses fabricated using the sol-gel process, obtaining transparent and fluorescent hybrid matrices which were stable in time and temperature. In addition, immobilization of the complexes allows an easy manipulation of the material, thus offering promising applications in the development of biological and chemical sensors.

Formation of complexes between the conjugated polyelectrolyte poly{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]fluorene-phenylene} bromide (HTMA-PFP) and human serum albumin.

The interaction between the conjugated polyelectrolyte poly{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]fluorene-phenylene} bromide (HTMA-PFP) and human serum albumin (HSA) has been investigated from changes observed in both the spectroscopic properties of HTMA-PFP and the intrinsic fluorescence of HSA. Absorption and fluorescence spectra of HTMA-PFP suggest that HTMA-PFP and HSA form polymer-protein complexes due to electrostatic interactions between the cationic side chains of HTMA-PFP and the negatively charged surface of the protein. Interaction between both macromolecules induces an increase in the fluorescence signal of HTMA-PFP, which suggests that hydrophobic forces also contribute to the polymer-protein complex stabilization. In addition, this interaction causes a decrease in the HSA fluorescence, partially due to static quenching and energy transfer between both macromolecules. Effects of HTMA-PFP on the thermal stability and protein conformation were explored from CD experiments. Results indicate that as polymer is added it binds to HSA and initiates unfolding. This unfolding process induces HTMA-PFP chains to become more extended, disrupting backbone interactions and increasing polymer fluorescence intensity.