Wind turbine database for intelligent operation and maintenance strategies.

With the aim of helping researchers to develop intelligent operation and maintenance strategies, in this manuscript, an extensive 3-years Supervisory Control and Data Acquisition database of five Fuhrländer FL2500 2.5 MW wind turbines is presented. The database contains 312 analogous variables recorded at 5-minute intervals, from 78 different sensors. The reported values for each sensor are minimum, maximum, mean, and standard deviation. The database also contains the alarm events, indicating the system and subsystem and a small description. Finally, a set of functions to download specific subsets of the whole database is freely available in Matlab, R, and Python. To demonstrate the usefulness of this database, an illustrative example is given. In this example, different gearbox variables are selected to estimate a target variable to detect whether or not the estimate differs from the actual value provided for the sensor. By using this normality modelling approach, it is possible to detect rotor malfunction when the estimate differs from the actual measured value.

Special Issue "Machine Learning Methods for Biomedical Data Analysis".

Machine learning is an effective method for developing automatic algorithms for analysing sophisticated biomedical data [...].

EMD-based data augmentation method applied to handwriting data for the diagnosis of Essential Tremor using LSTM networks.

The increasing capacity of today's technology represents great advances in diagnosing diseases using standard procedures supported by computer science. Deep learning techniques are able to extract the characteristics of temporal signals to study their patterns and diagnose diseases such as essential tremor. However, these techniques require a large amount of data to train the neural network and achieve good results, and the more data the network has, the more accurate the final model implemented. In this work we propose the use of a data augmentation technique to improve the accuracy of a Long short-term memory system in the diagnosis of essential tremor. For this purpose, the multivariate Empirical Mode Decomposition method will be used to decompose the original temporal signals collected from control subjects and patients with essential tremor. The time series obtained from the decomposition, covering different frequency ranges, will be randomly shuffled and combined to generate new artificial samples for each group. Then, both the generated artificial samples and part of the real samples will be used to train the LSTM network, and the remaining original samples will be used to test the model. The experimental results demonstrate the capability of the proposed method, which is compared to a set of 10 different data augmentation methods, and in all cases outperforms all other methods. In the best case, the proposed method increases the accuracy of the classifier from 83.20% to almost 93% when artificial samples are generated, which is a promising result when only small databases are available.

A Machine Learning Approach for Predicting Non-Suicidal Self-Injury in Young Adults.

Artificial intelligence techniques were explored to assess the ability to anticipate self-harming behaviour in the mental health context using a database collected by an app previously designed to record the emotional states and activities of a group of subjects exhibiting self-harm. Specifically, the Leave-One-Subject-Out technique was used to train classification trees with a maximum of five splits. The results show an accuracy of 84.78%, a sensitivity of 64.64% and a specificity of 85.53%. In addition, positive and negative predictive values were also obtained, with results of 14.48% and 98.47%, respectively. These results are in line with those reported in previous work using a multilevel mixed-effect regression analysis. The combination of apps and AI techniques is a powerful way to improve the tools to accompany and support the care and treatment of patients with this type of behaviour. These studies also guide the improvement of apps on the user side, simplifying and collecting more meaningful data, and on the therapist side, progressing in pathology treatments. Traditional therapy involves observing and reconstructing what had happened before episodes once they have occurred. This new generation of tools will make it possible to monitor the pathology more closely and to act preventively.

A Fast Approach to Removing Muscle Artifacts for EEG with Signal Serialization Based Ensemble Empirical Mode Decomposition.

An electroencephalogram (EEG) is an electrophysiological signal reflecting the functional state of the brain. As the control signal of the brain-computer interface (BCI), EEG may build a bridge between humans and computers to improve the life quality for patients with movement disorders. The collected EEG signals are extremely susceptible to the contamination of electromyography (EMG) artifacts, affecting their original characteristics. Therefore, EEG denoising is an essential preprocessing step in any BCI system. Previous studies have confirmed that the combination of ensemble empirical mode decomposition (EEMD) and canonical correlation analysis (CCA) can effectively suppress EMG artifacts. However, the time-consuming iterative process of EEMD may limit the application of the EEMD-CCA method in real-time monitoring of BCI. Compared with the existing EEMD, the recently proposed signal serialization based EEMD (sEEMD) is a good choice to provide effective signal analysis and fast mode decomposition. In this study, an EMG denoising method based on sEEMD and CCA is discussed. All of the analyses are carried out on semi-simulated data. The results show that, in terms of frequency and amplitude, the intrinsic mode functions (IMFs) decomposed by sEEMD are consistent with the IMFs obtained by EEMD. There is no significant difference in the ability to separate EMG artifacts from EEG signals between the sEEMD-CCA method and the EEMD-CCA method (p > 0.05). Even in the case of heavy contamination (signal-to-noise ratio is less than 2 dB), the relative root mean squared error is about 0.3, and the average correlation coefficient remains above 0.9. The running speed of the sEEMD-CCA method to remove EMG artifacts is significantly improved in comparison with that of EEMD-CCA method (p < 0.05). The running time of the sEEMD-CCA method for three lengths of semi-simulated data is shortened by more than 50%. This indicates that sEEMD-CCA is a promising tool for EMG artifact removal in real-time BCI systems.

Automatic ham classification method based on support vector machine model increases accuracy and benefits compared to manual classification.

The thickness of the subcutaneous fat (SFT) is a very important parameter in the ham, since determines the process the ham will be submitted. This study compares two methods to predict the SFT in slaughter line: an automatic system using an SVM model (Support Vector Machine) and a manual measurement of the fat carried out by an experienced operator, in terms of accuracy and economic benefit. These two methods were compared to the golden standard obtained by measuring SFT with a ruler in a sample of 400 hams equally distributed within each SFT class. The results show that the SFT prediction made by the SVM model achieves an accuracy of 75.3%, which represents an improvement of 5.5% compared to the manual measurement. Regarding economic benefits, SVM model can increase them between 12 and 17%. It can be concluded that the classification using SVM is more accurate than the one performed manually with an increase of the economic benefit for sorting.

On-line Ham Grading using pattern recognition models based on available data in commercial pig slaughterhouses.

The thickness of the subcutaneous fat in hams is one of the most important factors for the dry-curing process and largely determines its final quality. This parameter is usually measured in slaughterhouses by a manual metrical measure to classify hams. The aim of the present study was to propose an automatic classification method based on data obtained from a carcass automatic classification equipment (AutoFom) and intrinsic data of the pigs (sex, breed, and weight) to simulate the manual classification system. The evaluated classification algorithms were decision tree, support vector machines (SVM), k-nearest neighbour and discriminant analysis. A total of 4000 hams selected by breed and sex were classified as thin (0-10 mm), standard (11-15 mm), semi-fat (16-20 mm) and fat (>20 mm). The most reliable model, with a percentage of success of 73%, was SVM with Gaussian kernel, including all data available. These results suggest that the proposed classification method can be a useful online tool in slaughterhouses to classify hams.

Discrete Cosine Transform for the Analysis of Essential Tremor.

Essential tremor (ET) is the most common movement disorder. In fact, its prevalence is about 20 times higher than that of Parkinson's disease. In addition, studies have shown that a high percentage of cases, between 50 and 70%, are estimated to be of genetic origin. The gold standard test for diagnosis, monitoring and to differentiate between both pathologies is based on the drawing of the Archimedes' spiral. Our major challenge is to develop the simplest system able to correctly classify Archimedes' spirals, therefore we will exclusively use the information of the x and y coordinates. This is the minimum information provided by any digitizing device. We explore the use of features from drawings related to the Discrete Cosine Transform as part of a wider cross-study for the diagnosis of essential tremor held at Biodonostia. We compare the performance of these features against other classic and already analyzed ones. We outperform previous results using a very simple system and a reduced set of features. Because the system is simple, it will be possible to implement it in a portable device (microcontroller), which will receive the x and y coordinates and will issue the classification result. This can be done in real time, and therefore without needing any extra job from the medical team. In future works these new drawing-biomarkers will be integrated with the ones obtained in the previous Biodonostia study. Undoubtedly, the use of this technology and user-friendly tools based on indirect measures could provide remarkable social and economic benefits.