Development of a testing device for external wrist bridging dynamic fixators used for distal radius fractures.

BACKGROUND: Stabilization of extra-articular distal radius fractures by wrist joint bridging (WB) dynamic fixation allows for early motion of the wrist, but relies on exact positioning of the device. In fact, physiological movement appeared to be compromised with even distinctly aberrant positioning of such device. To investigate this issue in more detail, we developed an in-vitro testing apparatus suitable for assessing the forces required for flexion and extension of the wrist. METHODS: The experimental set-up enables the transmission of the translational movement of the traverse of a universal testing machine into the main physiological movement (flexion and extension) of the wrist. An external WB dynamic fixator was assembled to an artificial saw bone wrist model prior and after performing a wedge-shaped osteotomy on the distal radius about 1.5 cm proximal to the joint line, i.e. generation of a fracture model. The functionality of the fixator was evaluated under either condition and the effect of misalignment of the external WB dynamic fixator was quantified by purposeful violation of the manufacture's instructions. Results were statistically analyzed using the generalized linear mixed model. FINDINGS: Significantly higher loading was noted as the degree of misalignment increased. The normalized force was significantly higher at a misalignment of 20° compared to 10° (10°: 4.13; 20°: 6.93, P < 0.001). INTERPRETATION: The proposed set-up turned out to allow highly reproducible and sensitive recording of the reaction forces during flexion and extension of the wrist and thus is feasible for the evaluation and comparison of different external WB devices.

Regional variations in the intra- and intervertebral trabecular microarchitecture of the osteoporotic axial skeleton.

Trabecular structures in vertebral bodies are unequally distributed in the cervical, thoracic and lumbar spine, and also within individual vertebrae. Knowledge of the microstructure of these entities could influence our comprehension and treatment of osteoporotic fractures, and even surgical procedures. Appropriate investigations may clarify the pathomechanisms of various osteoporotic fractures (fish, wedge-shaped, and flat vertebrae). We obtained three cancellous bone cylinders from the centers and margins of cervical vertebra 3 to lumbar vertebra 5, and investigated these in regard of bone volume fraction, trabecular thickness, separation, trabecular number, trabecular bone pattern factor, connectivity density, and degree of anisotropy. Using a Jamshidi needle®, we obtained samples from three quadrants (QI: right-sided edge, QII: central, QIII: left-sided edge) of 242 prepared vertebrae, and investigated these on a micro-CT device. In all, 726 bone samples were taken from eleven body donors. Bone volume fraction, trabecular thickness, and the degree of anisotropy were significantly lower in QII than in QI and QIII. Trabecular pattern factor, however, was significantly higher in QII than in QI and QIII. The results helped to explain fish vertebrae. Wedge fractures and flat vertebrae are most likely caused by the complex destruction of trabecular and cortical structures. The higher bone volume fraction in the cervical spine compared to the thoracic and lumbar spine accounts for the small number of fractures in the cervical spine. The marked trabecular pattern factor in the center of thoracic and lumbar vertebrae could be a reason for the surgeon to use different screw designs for individual vertebrae.

Histomorphometric analysis of osteocyte density and trabecular structure of 92 vertebral bodies of different ages and genders.

BACKGROUND: Knowledge of the histomorphometric structure of the vertebral body and factors influencing the structure is essential for a fundamental understanding of osteoporosis and osteoporotic fractures. The present study is focused on osteocyte density - a parameter seldom investigated so far - and trabecular width as well as bone area over tissue area in human vertebral bodies. METHODS: Ninety-two vertebral body specimens (C5, C6, Th8, Th12, L1, L2) from 12 males and seven females were studied (Ethics Application Number A 2017-0072). The prepared vertebral specimens were extracted from the ventral aspect with a Jamshidi needle®. The punches were decalcified and subsequently H&E stained. Using the Fiji/Image J program (version 1.53 f, Wayne Resband, National Institute of Mental Health, USA), osteocyte numbers were counted per calcified bone surface, and the trabecular width and bone area of trabecular bone were measured. The collected data were analyzed using the statistical software package SPSS, version 23.0 (SPSS Inc., Chicago, USA). Pearson's correlation coefficient was used for correlation analyses. Multiple linear regression analyses were also performed. RESULTS: Osteocyte density did not differ significantly in comparisons based on gender and age (≤65 years; ≥66 years). Men had wider trabeculae (p < 0.001) and a higher bone area over tissue area (BA/TA, %) (p = 0.025) than women. Individuals over 65 years of age had thinner trabeculae (p < 0.001) and a smaller BA/TA (%) (p < 0.001) than younger individuals. Multiple linear regression analyses were performed to determine the influence of 'gender' and 'age' on trabecular width and bone area over tissue area. The R² was 0.388 for trabecular width and 0.227 for BA/TA (%). Per year of life, trabecular width decreases by 0.368 µm (ß < 0.001) and BA/TA (%) by 0.001% (ß = 0.001). Men have on average 8.2 µm wider trabeculae than women (ß = 0.035). A negative correlation (r = -0.275) was observed between trabecular width and osteocyte density. The wider the trabeculae, the fewer osteocytes per mm² (p = 0.008). CONCLUSIONS: Surprisingly, we found no difference in osteocyte density with reference to age or gender. However, we did register significant age- and gender-related differences in bone area over tissue area and trabecular thickness. The age-related differences were more pronounced, implying that age-dependent loss of bone structure may be more important than differences between genders.

3D optical scanning as an objective and reliable tool for volumetry of the foot and ankle region.

BACKGROUND: Edema development of the foot and ankle region should be evaluated by an objective measurement. We hypothesized, that 3D optical scanning of this region can serve as an alternative to clinically established measurement techniques. METHODS: Two investigators determined the volume by 3D optical scanning and the figure-of-eight method in a random order at 2 separate time points. Plots were created and ICCs were calculated for determination of reliability. The Pearson correlation coefficient served as a measure of the association between both measures. RESULTS: 40 healthy volunteers with mean age of 28.3±9.9 years underwent four sequences of measurements. The inter- and intraobserver reliability of both methods was excellent with high intraclass correlation coefficients (ICC 3,1). A strong correlation (r=0.96, P<0.001) between measured ankle volumes was noted. CONCLUSION: 3D optical scanning turned out to be more reliable than the figure-of-eight method in a preclinical set-up. A clinical use should be aimed at.

Why Insufficiency Fractures are Rarely Found in the Cervical Spine, Even with Osteoporosis. / Warum sich in der Halswirbelsäule auch bei Osteoporose nur selten Insuffizienzfrakturen finden.

INTRODUCTION: The human bone structure changes with an increase in age. Both material and structural properties affect bone strength. Despite the ageing of society, however, hardly any data are available on these parameters for elderly individuals. Therefore, in the present study, cancellous bone cylinders were taken from the center of each vertebral body (C3 to L5) and examined with regard to bone volume fraction, trabecular thickness, separation, number of trabeculae, cross-linking, connectivity density and degree of anisotropy. MATERIAL AND METHODS: Samples were obtained from 440 body donors using a Jamshidi needle and analysed using microcomputed tomography. Existing deformities, fractures and bone mineral density of each vertebra were recorded by quantitative computed tomography. RESULTS: With regard to the microcomputed tomography parameters, statistically significant differences were found between the different sections of the vertebrae: the trabeculae of the cervical vertebrae were significantly thicker and more closely spaced than in the thoracic and lumbar vertebrae. The bone volume fraction was significantly higher in this spinal segment, as was the connection density and the number of trabeculae and cross-links. In addition, the degree of anisotropy was significantly lower in the cervical vertebrae than in the other spinal segments. With regard to quantitative computed tomography, there was a significantly higher bone mineral density in the cervical vertebrae. CONCLUSION: Even with osteoporosis, cervical vertebrae fracture significantly later than thoracic and lumbar vertebrae due to their unique microarchitecture and higher density. Thus, the cervical vertebrae has specific properties.

A comparison, using X-ray micro-computed tomography, of the architecture of cancellous bone from the cervical, thoracic and lumbar spine using 240 vertebral bodies from 10 body donors.

The vertebral trabecular bone has a complex three-dimensional microstructure with an inhomogeneous morphology. Correct identification and assessment of the weakest segments of the cancellous bone may lead to better prediction of fracture risk. The aim of this study was to compare cancellous bone from 240 vertebrae of the cervical, thoracic and lumbar spine of ten body donors with osteoporosis in regard to bone volume fraction (BVF), trabecular thickness, separation, trabecular number and degree of anisotropy, to ascertain why cervical vertebrae rarely fracture, even with severe osteoporosis. Samples were obtained from all vertebrae with a Jamshidi needle (8 Gauge). The investigations were performed with a micro-computed tomography (micro-CT) device (SKYSCAN 1172, RJL Micro & Analytic GmbH, Karlsdorf-Neuthard, Germany). Existing vertebral fractures and the bone mineral density of the lumbar spine were assessed with quantitative CT. Regarding the micro-CT parameters, statistically significant differences were observed between the various sections of the spine. We found a higher BVF, trabecular number and trabecular thickness, as well as a lower trabecular separation of the cervical vertebrae compared to other vertebrae. In addition, the degree of anisotropy in the cervical spine is lower than in the other spinal column sections. These results are age and sex dependent. Thus, the cervical spine has special structural features, whose causes must be determined in further investigations.

NADPH Oxidase Contributes to Resistance against Aggregatibacter actinomycetemcomitans-Induced Periodontitis in Mice.

Aggregatibacter actinomycetemcomitans is a Gram-negative commensal bacterium of the oral cavity which has been associated with the pathogenesis of periodontitis with severe alveolar bone destruction. The role of host factors such as reactive oxygen and nitrogen intermediates in periodontal A. actinomycetemcomitans infection and progression to periodontitis is still ill-defined. Therefore, this study aimed to analyze the role of NADPH oxidase and inducible nitric oxide synthase (iNOS) in a murine model of A. actinomycetemcomitans-induced periodontitis. NADPH oxidase-deficient (gp91phox knockout [KO]), iNOS-deficient (iNOS KO), and C57BL/6 wild-type mice were orally infected with A. actinomycetemcomitans and analyzed for bacterial colonization at various time points. Alveolar bone mineral density and alveolar bone volume were quantified by three-dimensional micro-computed tomography, and the degree of tissue inflammation was calculated by histological analyses. At 5 weeks after infection, A. actinomycetemcomitans persisted at significantly higher levels in the murine oral cavities of infected gp91phox KO mice than in those of iNOS KO and C57BL/6 mice. Concomitantly, alveolar bone mineral density was significantly lower in all three infected groups than in uninfected controls, but with the highest loss of bone density in infected gp91phox KO mice. Only infected gp91phox KO mice revealed significant loss of alveolar bone volume and enhanced inflammatory cell infiltration, as well as an increased number of osteoclasts. Our results indicate that NADPH oxidase is important to control A. actinomycetemcomitans infection in the murine oral cavity and to prevent subsequent alveolar bone destruction and osteoclastogenesis.

Interlocking Nailing Versus Interlocking Plating in Intra-articular Calcaneal Fractures: A Biomechanical Study.

BACKGROUND: Open reduction and internal fixation with a plate is deemed to represent the gold standard of surgical treatment for displaced intra-articular calcaneal fractures. Standard plate fixation is usually placed through an extended lateral approach with high risk for wound complications. Minimally invasive techniques might avoid wound complications but provide limited construct stability. Therefore, 2 different types of locking nails were developed to allow for minimally invasive technique with sufficient stability. The aim of this study was to quantify primary stability of minimally invasive calcaneal interlocking nail systems in comparison to a variable-angle interlocking plate. MATERIAL AND METHODS: After quantitative CT analysis, a standardized Sanders type IIB fracture model was created in 21 fresh-frozen cadavers. For osteosynthesis, 2 different interlocking nail systems (C-Nail; Medin, Nov. Mesto n. Morave, Czech Republic; Calcanail; FH Orthopedics SAS; Heimsbrunn, France) as well as a polyaxial interlocking plate (Rimbus; Intercus GmbH; Rudolstadt, Germany) were used. Biomechanical testing consisted of a dynamic load sequence (preload 20 N, 1000 N up to 2500 N, stepwise increase of 100 N every 100 cycles, 0.5 mm/s) and a load to failure sequence (max. load 5000 N, 0.5 mm/s). Interfragmentary movement was detected via a 3-D optical measurement system. Boehler angle was measured after osteosynthesis and after failure occurred. RESULTS: No significant difference regarding load to failure, stiffness, Boehler angle, or interfragmentary motion was found between the different fixation systems. A significant difference was found with the dynamic failure testing sequence where 87.5% of the Calcanail implants failed in contrast to 14% of the C-Nail group (P < .01) and 66% of the Rimbus plate. The highest load to failure was observed for the C-Nail. Boehler angle showed physiologic range with all implants before and after the biomechanical tests. CONCLUSION: Both minimally invasive interlocking nail systems displayed a high primary stability that was not inferior to an interlocking plate. CLINICAL RELEVANCE: Based on our results, both interlocking nails appear to represent a viable option for treating displaced intra-articular calcaneal fractures.

Cementless Titanium Mesh Fixation of Osteoporotic Burst Fractures of the Lumbar Spine Leads to Bony Healing: Results of an Experimental Sheep Model.

INTRODUCTION: Current treatment strategies for osteoporotic vertebral compression fractures (VCFs) focus on cement-associated solutions. Complications associated with cement application are leakage, embolism, adjacent fractures, and compromise in bony healing. This study comprises a validated VCF model in osteoporotic sheep in order to (1) evaluate a new cementless fracture fixation technique using titanium mesh implants (TMIs) and (2) demonstrate the healing capabilities in osteoporotic VCFs. METHODS: Twelve 5-year-old Merino sheep received ovariectomy, corticosteroid injections, and a calcium/phosphorus/vitamin D-deficient diet for osteoporosis induction. Standardized VCFs (type AO A3.1) were created, reduced, and fixed using intravertebral TMIs. Randomly additional autologous spongiosa grafting (G1) or no augmentation was performed (G2, n = 6 each). Two months postoperatively, macroscopic, micro-CT and biomechanical evaluation assessed bony consolidation. RESULTS: Fracture reduction succeeded in all cases without intraoperative complications. Bony consolidation was proven for all cases with increased amounts of callus development for G2 (58.3%). Micro-CT revealed cage integration. Neither group showed improved results with biomechanical testing. CONCLUSIONS: Fracture reduction/fixation using TMIs without cement in osteoporotic sheep lumbar VCF resulted in bony fracture healing. Intravertebral application of autologous spongiosa showed no beneficial effects. The technique is now available for clinical use; thus, it offers an opportunity to abandon cement-associated complications.

Parameters for novel incus replacement prostheses.

Prostheses replacing the incus in its normal position and equipped with two joints might transfer sound as effectively as the intact ossicular chain and allow adjustment to quasi-static pressure changes. A prerequisite for prostheses development is the access to dimensions and distances of the ossicular chain which are necessary to conceptualize shape and size. Fifteen cadaveric human temporal bone specimens were investigated by means of micro-CT followed by 3D analysis. Each specimen was scanned three times: after removal of incus, after additional removal of the malleus head, and after approaching the umbo to the promontory. Artificial umbo medialization as a surrogate for quasi-static pressure changes leads to relevant variations in the distance between the upper part of the malleus and the stapes. Prostheses replacing the incus in its normal position should be equipped with a sliding ball joint or similar construction to allow adjustment to quasi-static pressure changes.

Intrabody application of eptotermin alpha enhances bone formation in osteoporotic fractures of the lumbar spine; however, fails to increase biomechanical stability - results of an experimental sheep model.

This study analyses the effect of eptotermin α application into fractured vertebrae. It is hypothesized that eptotermin α is capable to enhance bony healing of the osteoporotic spine. In 10 Merino sheep osteoporosis induction was performed by ovariectomy, corticosteroid therapy and calcium/phosphorus/vitamin D-deficient diet; followed by standardized creation of lumbar vertebral compression fractures (VCFs) type A3.1 and consecutive fracture reduction/fixation using expandable mesh cages. Randomly, intravertebral eptotermin α (G1) or no augmentation was added (G2). Macroscopic, micro-CT, and biomechanical evaluation assessed bony consolidation two months postoperatively: Micro-CT data revealed bony consolidation for all cases with significant increased callus development for G2 (60%) and BV/TV (bone volume/total volume 73.45%, osteoporotic vertebrae 35.76%). Neither group showed improved biomechanical stability. Eptotermin α enhanced mineralisation in VCFs in an experimental setup with use of cementless augmentation via an expandable cage. However, higher bone mineral density did not lead to superior biomechanical properties.

Minimum cement volume required in vertebral body augmentation--A biomechanical study comparing the permanent SpineJack device and balloon kyphoplasty in traumatic fracture.

BACKGROUND: Minimally invasive treatment of vertebral fractures is basically characterized by cement augmentation. Using the combination of a permanent implant plus cement, it is now conceivable that the amount of cement can be reduced and so this augmentation could be an attractive opportunity for use in traumatic fractures in young and middle-aged patients. The objective of this study was to determine the smallest volume of cement necessary to stabilize fractured vertebrae comparing the SpineJack system to the gold standard, balloon kyphoplasty. METHODS: 36 fresh frozen human cadaveric vertebral bodies (T11-L3) were utilized. After creating typical compression wedge fractures (AO A1.2.1), the vertebral bodies were reduced by SpineJack (n=18) or kyphoplasty (n=18) under preload (100N). Subsequently, different amounts of bone cement (10%, 16% or 30% of the vertebral body volume) were inserted. Finally, static and dynamic biomechanical tests were performed. FINDINGS: Following augmentation and fatigue tests, vertebrae treated with SpineJack did not show any significant loss of intraoperative height gain, in contrast to kyphoplasty. In the 10% and 16%-group the height restoration expressed as a percentage of the initial height was significantly increased with the SpineJack (>300%). Intraoperative SpineJack could preserve the maximum height gain (mean 1% height loss) better than kyphoplasty (mean 16% height loss). INTERPRETATION: In traumatic wedge fractures it is possible to reduce the amount of cement to 10% of the vertebral body volume when SpineJack is used without compromising the reposition height after reduction, in contrast to kyphoplasty that needs a 30% cement volume.

Geometric parameters of the ossicular chain as a function of its integrity: a micro-CT study in human temporal bones.

HYPOTHESIS: Determining the spatial distribution of the malleus handle in relationship to the stapes as a function of the condition of the ossicular chain. BACKGROUND: The position of replacement prosthesis and by association the direction of the force vectors exerted on the stapes head or footplate depends on the location of the malleus handle in relationship to the stapes and the contact point of the prosthesis at the malleus. Ideally, the force of prosthesis is conducted along an imaginary line through the center of the footplate and the stapes head. METHODS: Fifteen cadaveric human temporal bone specimens were investigated by means of micro-CT followed by 3D analysis. For different contact points, the angulation of a virtual rod prosthesis compared with the ideal reconstructive situation was determined. RESULTS: In case of missing incus, angulation of an imaginary line from stapes head to the most medially located point of the malleus handle (on average, 0.6 mm above the malleus tip) averages 85 ± 8 degrees (95% CI, 80-89 degrees) and to the upper end of the malleus handle 69 ± 7 degrees (95% CI, 65-73 degrees). Angulation from the center of the footplate to the malleus tip averages 37 ± 7 degrees (95% CI, 33-41 degrees) and to the upper end of the malleus 33 ± 5 degrees (95% CI, 30-36 degrees). The differences of the spatial distribution of the malleus handle in relationship to the stapes in different conditions of the ossicular chain are not relevant. CONCLUSION: In contrast to the ideal reconstructive situation, the present data show a malleus-stapes offset with particular unfavorable angles for a stapes head to malleus tip assembly.

Prevention of capsule opacification after accommodating lens refilling: pilot study of strategies evaluated in a monkey model.

PURPOSE: To test 2 strategies to prevent capsule opacification after accommodating lens refilling in a rhesus monkey model. SETTING: Animal laboratory and laboratory of European university medical centers. DESIGN: Experimental study. METHODS: Six rhesus monkeys had refilling of the lens capsular bag. In the first strategy, before it was filled with a silicone polymer, the capsular bag was treated with noncommercial sodium hyaluronate 1.0% containing cytotoxic substances. In the second strategy, the capsular bag was filled with clinically used sodium hyaluronate 1.0% (Healon) after treatment with actinomycin-D. Slitlamp inspection was performed during a follow-up of 40 to 50 weeks. After enucleation, magnetic resonance images were obtained and confocal fluorescence imaging was performed. RESULTS: Using the first strategy, capsule opacification developed in all eyes. Using the second strategy, 1 monkey did not develop capsule opacification after a 9-month follow-up. In a second monkey, the lens capsule remained clear for 3 months, after which the hyaluronate refill material was exchanged with a silicone polymer and capsule opacification developed. Combining these results with those in a previous study, the difference in opacification between silicone and sodium hyaluronate as refilling materials was statistically significant (P<.01). CONCLUSIONS: That no capsular bag fibrosis occurred in the presence of hyaluronate suggests that the properties of hyaluronate are the reason that remaining lens epithelial cells do not develop into fibrotic cells. The choice of a suitable lens-refilling material prevents the development of capsule opacification. FINANCIAL DISCLOSURE: Mr. Terwee was an employee of Abbott Medical Optics B.V. during the study period. No other author has a financial or proprietary interest in any material or method mentioned.

Is the prosthesis length in malleostapedotomy for otosclerosis revision surgery predictable?

HYPOTHESIS: The prosthesis length in malleostapedotomy for otosclerosis revision surgery can be calculated if the prosthesis length of previous conventional incus stapedotomy is known. BACKGROUND: Malleostapedotomy is used in revision surgery for otosclerosis in case of severe incus erosion and malleus or incus fixation. METHODS: Fifteen cadaveric human temporal bone specimens were investigated by means of micro-CT followed by 3D analysis. The distance between the incus and the stapes footplate as well as distances between the malleus and the footplate were measured and compared. RESULTS: The required length of virtually bent prostheses corresponded approximately to the 1.5-fold of virtual stapes prostheses in 93%. The addition of 2 mm predicted the required prostheses length almost correctly in 80%. CONCLUSION: The clinical practice will show whether a preoperative calculation of expected prosthesis length in MS based on the length of the formerly used stapes prosthesis is possible and helpful.

First ray instability in hallux valgus deformity: a radiokinematic and pedobarographic analysis.

BACKGROUND: Hallux valgus remains a common forefoot condition where different causes may contribute to the pathology. The extent of first ray mobility and, in particular, instability of the first tarsometatarsal joint represents a key argument in the debate on the selection of an appropriate operative treatment. Until now, assessment of first ray instability has relied on clinical examination or static assessment only. For dynamic evaluation in our study, pedobarographic, clinical, and standard weightbearing radiographic findings were correlated with the radiokinematically determined first ray instability in the sagittal plane in hallux valgus patients. METHODS: Eight patients with hallux valgus deformity and a clinically unstable first tarsometatarsal joint were enrolled. Seven patients were females; 1 was male. Mean age was 44 years (range, 15-65). Clinical symptoms, American Orthopaedic Foot and Ankle Society forefoot scores, and standard parameters of weightbearing radiographs in 2 planes of the forefoot were recorded. A mobile C-arm fluoroscope with a novel distortion-free flat-screen detector and a pedobarographic platform were synchronized during the rollover process. Fluoroscopic image analysis was performed employing a specific CAD model. Pedobarographic parameters were determined within 8 defined areas of the forefoot contact zone. RESULTS: The mean dorsiflexion distance and angle of the first ray was 13.9 ± 9.4 mm (range, 6.3 to 34.5) and 5.9 ± 4.0 degrees (range, 2.4 to 14.5). At the first tarsometatarsal joint, the mean maximum dorsiflexion angle was 2.6 ± 1.3 degrees (range, 0.1 to 4.0). The intermetatarsal angle correlated significantly (P = .013) with the radiokinematically determined maximum dorsiflexion. Furthermore, a significant correlation between maximum force transfer to the central (P = .021) and lateral forefoot (fourth metatarsal; P = .032) and first tarsometatarsal joint instability was detected with an unloading of the first metatarsal. CONCLUSION: Although our analysis was limited to the sagittal plane only, we can support the notion that an enlarged intermetatarsal angle was associated with increased maximum dorsiflexion of the first ray during gait in hallux valgus patients. Gross instability of the first tarsometatarsal joint during weightbearing was not detectable in our patients, while first tarsometatarsal joint instability increased maximum force transfer to the central forefoot with the potential risk of metatarsalgia. CLINICAL RELEVANCE: The results here may shed further light on the role of hypermobility of the first ray on hallux valgus deformity which could have implications for its surgical management.

Enhanced visualization of biodegradable polymeric vascular scaffolds by incorporation of gold, silver and magnetite nanoparticles.

Due to improved tissue regeneration and the enabling of post-operative minimally invasive interventions in the same vessel segment, biodegradable polymeric scaffolds represent a competitive approach to permanent metallic stents in vascular applications. Despite these advantages some challenges, such as the improvement of the scaffold mechanics and enhancement of scaffold visibility during the implantation procedure, are persisting. Therefore, the scope of our studies was to investigate the potential of gold, silver and magnetite nanoparticles incorporated in a polymeric blend of poly(L-lactide)/poly(4-hydroxybutyrate) for image enhancement in X-ray, magnetic resonance or near-infrared imaging. Their impact on mechanical properties of such modified scaffold materials was also evaluated.

Investigation of first ray mobility during gait by kinematic fluoroscopic imaging--a novel method.

BACKGROUND: It is often suggested that sagittal instability at the first tarso-metatarsal joint level is a primary factor for hallux valgus and that sagittal instability increases with the progression of the deformity. The assessment of the degree of vertical instability is usually made by clinical evaluation while any measurements mostly refer to a static assessment of medial ray mobility (i.e. the plantar/dorsal flexion in the sagittal plane). Testing methods currently available cannot attribute the degree of mobility to the corresponding anatomical joints making up the medial column of the foot. The aim of this study was to develop a technique which allows for a quantification of the in-vivo sagittal mobility of the joints of the medial foot column during the roll-over process under full weight bearing. METHODS: Mobility of first ray bones was investigated by dynamic distortion-free fluoroscopy (25 frames/s) of 14 healthy volunteers and 8 patients with manifested clinical instability of the first ray. A CAD-based evaluation method allowed the determination of mobility and relative displacements and rotations of the first ray bones within the sagittal plane during the stance phase of gait. RESULTS: Total flexion of the first ray was found to be 13.63 (SD 6.14) mm with the healthy volunteers and 13.06 (SD 8.01) mm with the patients (resolution: 0.245 mm/pixel). The dorsiflexion angle was 5.27 (SD 2.34) degrees in the healthy volunteers and increased to 5.56 (SD 3.37) degrees in the patients. Maximum rotations were found at the naviculo-cuneiform joints and least at the first tarso-metatarsal joint level in both groups. CONCLUSIONS: Dynamic fluoroscopic assessment has been shown to be a valuable tool for characterisation of the kinematics of the joints of the medial foot column during gait.A significant difference in first ray flexion and angular rotation between the patients and healthy volunteers however could not be found.

In vivo 7.1 T magnetic resonance imaging to assess the lens geometry in rabbit eyes 3 years after lens-refilling surgery.

PURPOSE: To evaluate the utility of high-resolution magnetic resonance imaging (MRI) in assessing the normal and refilled lens geometry in rabbits after lens-refilling surgery. SETTING: University of Rostock, Rostock, Germany. DESIGN: Experimental study. METHODS: High-resolution ocular MRIs were acquired (7.1 T ClinScan) using a 2-channel coil with 4 coil elements and T2-weighted turbo spin-echo sequences (slice thickness 700 µm, field of view 40 mm × 40 mm) in rabbits after lens refilling surgery combined with intraoperative treatment to prevent lens epithelial cell proliferation. Single slices were used to assess the refilled lenses 3 years postoperatively. RESULTS: The entire geometry (cross-sectional area, radius of curvature, axial and equatorial diameters) of the crystalline and refilled lenses was visualized by in vivo 7.1T MRI 3 years postoperatively (in-plane resolution: 125 µm × 125 µm). In refilled eyes, the capsule and the homogenous silicone polymer remained in close contact with no visible interface. The dimensions of the refilled lens were significantly smaller than those of the crystalline lens of the contralateral eye. CONCLUSIONS: High-resolution MRI allows in vivo visualization and analysis of the spatial arrangement of the lens in rabbit eyes after lens refilling surgery and overcomes a number of major limitations in the quantitative evaluation of the lens shape. Further efforts are required to optimize the amount of polymer injected during lens refilling to achieve a predictable refractive outcome after lens refilling surgery. FINANCIAL DISCLOSURE: Drs. Stachs, Langner, Sternberg, Martin, Schmitz, Hosten and Guthoff have no financial or proprietary interest in any material or method mentioned. Additional financial disclosure is found in the footnotes.