RESUMO
Understanding aging phenomena in batteries is crucial to the design of efficient, safe, and reliable energy storage devices as a part of the current green energy transition. Among the different aspects of a battery, the behavior of the electrolyte is a key parameter. Therefore, screening the aging characteristics of different electrolytes is of major interest. However, few screening studies exist because these are time-consuming and require the monitoring of numerous charge and discharge cycles. It has been demonstrated here that radiation chemistry, i.e., the interaction between ionizing radiation and matter, is a valuable tool to screen the behavior of various electrolytes within a few hours. Indeed, the rapid radiolysis of electrolytes leads to the production of the same gases as produced by electrochemical cycling (i.e., H2 , CO2 ), and the ranking of electrolytes by their H2 production yields similar performance ratings to those reported in the literature. Therefore, this direct comparison of electrolytes alone, lasting a few hours without any manufacturing operations such as the fabrication of electrochemical cells, demonstrates that controlled irradiation makes it possible to predict battery cycling behavior. Additionally, mechanisms involved in the degradation processes of different electrolytes are proposed.
RESUMO
In recent decades, rechargeable Mg batteries (RMBs) technologies have attracted much attention because the use of thin Mg foil anodes may enable development of high-energy-density batteries. One of the most critical challenges for RMBs is finding suitable electrolyte solutions that enable efficient and reversible Mg cells operation. Most RMB studies concentrate on the development of novel electrolyte systems, while only few studies have focused on the practical feasibility of using pure metallic Mg as the anode material. Pure Mg metal anodes have been demonstrated to be useful in studying the fundamentals of nonaqueous Mg electrochemistry. However, pure Mg metal may not be suitable for mass production of ultrathin foils (<100â microns) due to its limited ductility. The metals industry overcomes this problem by using ductile Mg alloys. Herein, the feasibility of processing ultrathin Mg anodes in electrochemical cells was demonstrated by using AZ31 Mg alloys (3 % Al; 1 % Zn). Thin-film Mg AZ31 anodes presented reversible Mg dissolution and deposition behavior in complex ethereal Mg electrolytes solutions that was comparable to that of pure Mg foils. Moreover, it was demonstrated that secondary Mg battery prototypes comprising ultrathin AZ31 Mg alloy anodes (≈25â µm thick) and Mgx Mo6 S8 Chevrel-phase cathodes exhibited cycling performance equal to that of similar cells containing thicker pure Mg foil anodes. The possibility of using ultrathin processable Mg metal anodes is an important step in the realization of rechargeable Mg batteries.
RESUMO
Promising theoretical capacities and high voltages are offered by Li-rich disordered rocksalt oxyfluoride materials as cathodes in lithium-ion batteries. However, as has been discovered for many other Li-rich materials, the oxyfluorides suffer from extensive surface degradation, leading to severe capacity fading. In the case of Li2VO2F, we have previously determined this to be a result of detrimental reactions between an unstable surface layer and the organic electrolyte. Herein, we present the protection of Li2VO2F particles with AlF3 surface modification, resulting in a much-enhanced capacity retention over 50 cycles. While the specific capacity for the untreated material drops below 100 mA h g-1 after only 50 cycles, the treated materials retain almost 200 mA h g-1. Photoelectron spectroscopy depth profiling confirms the stabilization of the active material surface by the surface modification and reveals its suppression of electrolyte decomposition.
RESUMO
The ageing phenomena occurring in various diethyl carbonate/LiPF6 solutions are studied using gamma and pulse radiolysis as a tool to generate similar species as the ones occurring in electrolysis of Li-ion batteries (LIBs). According to picosecond pulse radiolysis experiments, the reaction of the electron with (Li(+), PF6(-)) is ultrafast, leading to the formation of fluoride anions that can then precipitate into LiF(s). Moreover, direct radiation-matter interaction with the salt produces reactive fluorine atoms forming HF(g) and C2H5F(g). The strong Lewis acid PF5 is also formed. This species then forms various R(1)R(2)R(3) P=O molecules, where R is mainly -F, -OH, and -OC2H5. Substitution reactions take place and oligomers are slowly formed. Similar results were obtained in the ageing of an electrochemical cell filled with the same model solution. This study demonstrates that radiolysis enables a description of the reactivity in LIBs from the picosecond timescale until a few days.
Assuntos
Fontes de Energia Elétrica , Eletrólitos/química , Compostos de Lítio/química , Eletrólise , Espectrometria de Massas , Radiólise de Impulso , Soluções , Fatores de Tempo , ViscosidadeRESUMO
The present review reports the characterization and control of interfacial processes occurring on olivine LiFePO(4) and layered LiNi(1/2) Mn(1/2)O(2), standing here as model compounds, during storage and electrochemical cycling. The formation and evolution of the interphase created by decomposition of the electrolyte is investigated by using spectroscopic tools such as magic-angle-spinning nuclear magnetic resonance ((7)Li,(19)F and (31)P) and electron energy loss spectroscopy, in parallel to X-ray photoelectron spectroscopy, to quantitatively describe the interphase and unravel its architecture. The influence of the pristine surface chemistry of the active material is carefully examined. The importance of the chemical history of the surface of the electrode material before any electrochemical cycling and the strong correlation between interface phenomena, the formation/evolution of an interphase, and the electrochemical behavior appear clearly from the use of these combined characterization probes. This approach allows identifying interface aging and failure mechanisms. Different types of surface modifications are then investigated, such as intrinsic modifications upon aging in air or methods based on the use of additives in the electrolyte or carbon coatings on the surface of the active materials. In each case, the species detected on the surface of the materials during storage and cycling are correlated with the electrochemical performance of the modified positive electrodes.
RESUMO
In order to improve the electrochemical performances of lithium-sulfur batteries, it is crucial to understand profoundly their working mechanism and the limitation factors. This communication presents synchrotron-based in situ XRD studies of structural modifications occurring inside the cell upon cycling, since the active material changes constantly its form between solid and liquid phases.