Fluorescent sensing platform based on polyethyleneimine-protected copper nanoclusters for detection of chromium(VI) in real samples.

A new type of polyethyleneimine-protected copper nanoclusters (PEI-CuNCs) is favorably developed by a one-pot method under mild conditions. The obtained PEI-CuNCs is characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, Fourier-transform infrared (FTIR) spectroscopy and other techniques. It is worth noting that the proposed PEI-CuNCs demonstrate a selective response to chromium(VI) over other competitive species. Fluorescence quenching of PEI-CuNCs is determined to be chromium(VI) concentrations dependence with a low limit of detection of 8.9 nM. What is more, the as-developed PEI-CuNCs is further employed in building a detection platform for portable recognition of chromium(VI) in real samples with good accuracy. These findings may offer a distinctive strategy for the development of methods for analyzing and monitoring chromium(VI) and expand their application in real sample monitoring.

3-aminophenylboronic acid modified carbon nitride quantum dots as fluorescent probe for selective detection of dopamine and cell imaging.

Dopamine (DA) is the most abundant catecholamine neurotransmitter in the brain and plays an extremely essential role in the physiological activities of the living organism. There is a critical need for accurately and efficiently detecting DA levels in organisms in order to reflect physiological states. Carbon nitride quantum dots (C3N4) were, in recent years, used enormously as electrochemical and fluorescence probes for the detection of metal ions, biomarkers and other environmental or food impurities due to their unique advantageous optical and electronic properties. 3-Aminophenylboronic acid (3-APBA) can specifically combine with DA through an aggregation effect, providing an effective DA detection method. In this work, 3-APBA modified carbon nitride quantum dots (3-APBA-CNQDs) were synthesized from urea and sodium citrate. The structure, chemical composition and optical properties of 3-APBA-CNQDs were investigated by XRD, TEM, UV-visible, and FT-IR spectroscopy. The addition of DA could induce fluorescence quenching of 3-APBA-CNQDs possibly through the inner filter effect (IFE). 3-APBA-CNQDs shows better selectivity and sensitivity to DA than other interfering substances. By optimizing the experiment conditions, good linearity was obtained at 0.10-51µM DA with a low detection limit of 22.08 nM. More importantly, 3-APBA-CNQDs have been successfully applied for the detection of DA in human urine and blood samples as well as for bioimaging of intracellular DA. This study provides a promising novel method for the rapid detection of DA in real biological samples.

Sulfur-doped graphitic carbon nitride nanosheets as a sensitive fluorescent probe for detecting environmental and intracellular Ag.

Silver is widely used in medical materials, photography, electronics and other industries as a precious metal. The large-scale industrial production of silver-containing products and liquid waste emissions aggravate the environmental pollution. Silver ion is one of the most toxic metal ions, causing pollution to the environment and damage to public health. Therefore, the efficient and sensitive detection of Ag+in the water environment is extremely important. Sulfur-doped carbon nitride nanosheets (SCN Ns) were prepared by melamine and thiourea via high-temperature calcination. The morphology, chemical composition and surface functional groups of the SCN Ns were characterized by SEM, TEM, XRD, XPS, and FT-IR. The fluorescence of SCN Ns was gradually quenched as the Ag+concentration increased. The detection limit for Ag+was as low as 0.28 nM. The quenching mechanism mainly is attributed to static quenching. In this paper, SCN Ns were used as the fluorescent probe for detecting Ag+. SCN Ns have successfully detected Ag+in different environmental aqueous samples and cells. Finally, SCN Ns were further applied to the visual quantitative detection of intracellular Ag+.

Facile synthesis of sulfur and oxygen co-doped graphitic carbon nitride quantum dots for on-off detection of Cu2+in real samples and living cells.

A fluorescent sulfur and oxygen co-doped graphitic carbon nitride quantum dots (S,O-CNQDs) were prepared from ethylenediaminetetraacetic acid disodium salt dihydrate and thiourea as the carbon and sulfur sources. The morphology and surface functional groups of S,O-CNQDs were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The fluorescence of S,O-CNQDs could be quenched efficiently by Cu2+under the optimum conditions. The S,O-CNQDs could function as an excellent fluorescent probe for Cu2+detection with a wide linear range of 0.50-15µM and a low detection limit of 0.58 nM. In addition, this fluorescent probe was employed for monitoring Cu2+in samples of tap water, lake water, human serum and urine with good recoveries from 99.0% to 110.0%. Moreover, the S,O-CNQDs with high cell penetration and low cytotoxicity were utilized for Cu2+detection in living cells. Owing to the excellent properties of S,O-CNQDs, the as-prepared S,O-CNQDs can be a potential candidate for biological applications.

Structural and optical properties of penicillamine-protected gold nanocluster fractions separated by sequential size-selective fractionation.

Polydisperse water-soluble gold nanoclusters (AuNCs) protected by penicillamine have been synthesized in this work. The sequential size-selective precipitation (SSSP) technique has been applied for the size fractionation and purification of the monolayer-protected AuNCs. Through continuously adding acetone to a crude AuNC aqueous solution and controlling the volume percentage of acetone, we successfully separated the polydisperse AuNCs with diameters ranging from 0.5 to 5.4 nm into four different fractions sequentially. High-resolution transmission electron microscopy (HRTEM) shows that the four fractions are well-dispersed spherical particles of diameter 3.0 ± 0.6, 2.3 ± 0.5, 1.7 ± 0.4, and 1.2 ± 0.4 nm. Proton nuclear magnetic resonance spectroscopy suggests that disulfide, excess ligands and gold(I) complexes were removed from the AuNCs fractions. These results demonstrate the considerable potential of the SSSP technique for size-based separation and purification of AuNCs, achieving not only the isolation of larger nanoclusters (NCs) from small NCs in a continuous fashion, but also for the removal of small-molecule impurities. Based on the results from the mass spectrometry and thermogravimetric analysis, the average composition of the four fractions can be represented by Au38(SR)18, Au28(SR)15, Au18(SR)12, and Au11(SR)8, respectively. This indicates that the SSSP separation is mainly dependent on the core size and the ratio of Au atoms to ligands of AuNCs. X-ray photoelectron spectroscopy (XPS) has also been applied to observe the molecular dependence on the gold and sulfur chemical state of organosulfur monolayers of the fractions. The photoluminescence spectra of these AuNCs in the range of 900-790 nm was investigated at room temperature. The results show that the peak emission energy of the size-selected AuNCs undergoes a blue shift when the size is decreased, which can be attributed to the quantum confinement effect.

Size-dependent electrophoretic migration and separation of water-soluble gold nanoclusters by capillary electrophoresis.

Recently, water-soluble gold nanoclusters (AuNCs) have attracted more and more attention due to their unique properties. In this study, penicillamine-protected gold nanoclusters (Pen-AuNCs) were synthesized and initially fractionated by sequential size-selective precipitation (SSSP). The crude Pen-AuNCs and SSSP fractions were separated by capillary zone electrophoresis (CZE) with a diode array detector. The effects of key parameters, including the concentration of phosphate buffer, pH value and the ethanol content were systematically investigated. The separation of water-soluble poly-disperse AuNCs were well achieved at 30 mM phosphate buffer with 7.5% EtOH, pH 12.0, and applied voltage of 15 kV. The linear correlation between AuNCs diameter and mobility was observed. This finding provides an important reference for CE separation and product purification of water-soluble AuNCs or other nanomaterials.

Graphitic carbon nitride quantum dots as an "off-on" fluorescent switch for determination of mercury(II) and sulfide.

A rapid method has been developed for the determination of Hg(II) and sulfide by using graphitic carbon nitride quantum dots (g-CNQDs) as a fluorescent probe. The interaction between Hg(II) and g-CNQDs leads to the quenching of the blue g-CNQD fluorescence (with excitation/emission peaks at 390/450 nm). However, the fluorescence can be recovered after addition of sulfide such that the "turn-off" state is switched back to the "turn-on" state. The g-CNQDs were fully characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-vis absorption and fluorescence spectroscopy. Under the optimal experimental conditions, this probe is highly selective and sensitive to Hg(II). The linear response to Hg(II) extends from 0.20 to 21 µM with a detection limit of 3.3 nM. In addition, sulfide can be detected via the recovery of fluorescence. The linear response range for sulfide species is from 8.0 to 45 µM with a detection limit of 22 nM. The mechanism of the "turn-off-on" scheme is discussed. The methods have been applied to the analysis of spiked tap water, lake water and wastewater samples. Graphical abstract Schematic of an off-on fluorescent probe for mercury(II). The fluorescence of graphitic carbon nitride quantum dots (g-CNQDs) is quenched by Hg2+ but is recovered after reacting with S2- as it can combine with Hg2+ on the surface of g-CNQDs.

Silver-doped graphite carbon nitride nanosheets as fluorescent probe for the detection of curcumin.

Green fluorescent silver (Ag)-doped graphite carbon nitride (Ag-g-C3 N4 ) nanosheets have been fabricated by an ultrasonic exfoliating method. The fluorescence of the Ag-g-C3 N4 nanosheets is quenched by curcumin. The fluorescence intensity decreases with the increase in the concentration of curcumin, indicating that the Ag-g-C3 N4 nanosheets can function as a non-toxic and facile fluorescence probe to detect curcumin. The fluorescence intensity of Ag-g-C3 N4 nanosheets shows a linear relationship to curcumin in the concentration range 0.01-2.00 µM with a low detection limit of 38 nM. The fluorescence quenching process between curcumin and Ag-g-C3 N4 nanosheets mainly is based on static quenching. The fluorescent probe has been successfully applied to analyse curcumin in human urine and serum samples with satisfactory results.

Synthesis of N-acetyl-l-cysteine capped Mn:doped CdS quantum dots for quantitative detection of copper ions.

In this work, a new assembled copper ions sensor based on the Mn metal-enhanced fluorescence of N-acetyl-l-cysteine protected CdS quantum dots (NAC-Mn:CdS QDs) was developed. The NAC and Mn:CdS QDs nanoparticles were assembled into NAC-Mn:CdS QDs complexes through the formation of CdS and MnS bonds. As compared to NAC capped CdS QDs, higher fluorescence quantum yields of NAC-Mn:CdS QDs was observed, which is attributed to the surface plasmon resonance of Mn metal. In addition, the fluorescence intensity of as-formed complexes weakened in the presence of copper ions. The decrease in fluorescence intensity presented a linear relationship with copper ions concentration in the range from 0.16-3.36µM with a detection limit of 0.041µM . The characterization of as-formed QDs was analyzed by photoluminescence (PL), ultra violet-visible (UV-vis), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and energy dispersive spectroscopy (EDS) respectively. Furthermore, the recoveries and relative standard deviations of Cu2+ spiked in real water samples for the intra-day and inter-day analyses were 88.20-117.90, 95.20-109.90, 0.80-5.80 and 1.20-3.20%, respectively. Such a metal-enhanced QDs fluorescence system may have promising application in chemical and biological sensors.

Caso clínico: Rabdomiolisis secundaria al consumo de cocaína / Case report: Rabdomuolisis after cocaine consumption

Introducción: Las múltiples causas de Rabdomiolisis se pueden separar en 5 categorías según el mecanismo de daño del miocito: Hipóxicas, físicas, químicas, biológicas e idiopáticas. Como primera causa se describe el consumo de drogas ilícitas/alcohol, seguido por medicamentos, trauma, inmovilidad y ejercicio extenuante. Las causas químicas representan hasta el 80% de los casos de rabdomiolisis. En esta categoría se encuentran los medicamentos, alcohol y drogas donde destaca la cocaína. Se presenta el caso de un paciente masculino que cursa con insuficiencia renal aguda secundario a una rabdomiolisis por consumo de cocaína.

Introduction: The multiple causes of rhabdomyolysis can be separated into 5 categories according to the myocyte damage mechanism: hypoxic, physical, chemical and biological. However, a cause will not always be identified. The consumption of illicit drugs / alcohol has been identified as the first cause, followed by medication, trauma, immobility and extenuating exercise. The chemical causes represent up to 80% of cases of rhabdomyolysis. This category includes medications, alcohol and drugs, where cocaine stands out. Cocaine is a strong stimulant used mainly as a recreational drug that has considerably increased its consumption in the country so it should be considered. Next, we present the case of a male patient with acute renal failure secondary to rhabdomyolysis due to cocaine use. The physiopathology, diagnostic process and current management will be discussed according to the latest guidelines.

Phosphorus doped graphitic carbon nitride nanosheets as fluorescence probe for the detection of baicalein.

Phosphorus doped graphitic carbon nitride (P-g-C3N4) nanosheets were synthesized by calcination. P-g-C3N4 nanosheets were characterized by XRD, XPS, TEM, fluorescence, ultraviolet-visible absorption and Fourier transform infrared spectroscopy. The fluorescence of the P-g-C3N4 nanosheets was gradually quenched with the increase in the concentration of baicalein at room temperature. The proposed probe was used for the determination of baicalein in the concentration 2.0-30µM with a detection limit of 53nM. The quenching mechanism was discussed. The P-g-C3N4 nanosheets have been successfully applied for effective and selective detection of baicalein in human urine samples and blood samples.

Boron and nitrogen co-doped carbon dots as a sensitive fluorescent probe for the detection of curcumin.

In this present study, a fluorescent probe was developed to detect curcumin, which is derived from the rhizomes of the turmeric. We used a simple and economical way to synthesize boron and nitrogen co-doped carbon dots (BNCDs) by microwave heating. The maximum emission wavelength of the BNCDs was 450 nm at an excitation wavelength of 360 nm. The as-prepared BNCDs were characterized by multiple analytical techniques such as transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and infrared spectroscopy. The synthesized carbon nanoparticles had an average particle diameter of 4.23 nm. The BNCDs exhibited high sensitivity to the detection of curcumin at ambient conditions. The changes of BNCDs fluorescent intensity show a good linear relationship with the curcumin concentrations in the range 0.2-12.5 µM. This proposed method has been successfully applied to detect the curcumin in urine samples with the recoveries of 96.5-105.5%.

Detection of Ag(+) using graphite carbon nitride nanosheets based on fluorescence quenching.

The graphite carbon nitride (g-C3N4) nanosheets were synthesized and applied for the detection of Ag(+) ion in aqueous solutions. Transmission electron microscopy, Fourier infrared spectroscopy, x-ray diffraction, ultraviolet/visible and photoluminescence spectroscopy were used for characterization of g-C3N4 nanosheets. The fluorescence intensity of g-C3N4 nanosheets decreases with the increase in the concentration of Ag(+). The fluorescence probe can be applied for detection of Ag(+). The results show that it has high selectivity to Ag(+) and exhibits a good linearity over the concentration range 0.020-2.0µM with a detection limit of 27nM. Most cations do not have any interference on the detection of Ag(+). The quenching process is assessed and discussed. Finally, the g-C3N4 nanosheets have been successfully used for the detection of Ag(+) in real water samples. The recoveries of spiked water samples are >97%.

Phosphorus and Nitrogen Dual-Doped Hollow Carbon Dot as a Nanocarrier for Doxorubicin Delivery and Biological Imaging.

Innovative phosphorus and nitrogen dual-doped hollow carbon dots (PNHCDs) have been fabricated for anticancer drug delivery and biological imaging. The functional groups of PNHCDs are introduced by simply mixing glucose, 1,2-ethylenediamine, and concentrated phosphoric acid. This is an automatic method without external heat treatment to rapidly produce large quantities of PNHCDs, which avoid high temperature, complicated operations, and long reaction times. The as-prepared PNHCDs possess small particle size, hollow structure, and abundant phosphate/hydroxyl/pyridinic/pyrrolic-like N groups, endowing PNHCDs with fluorescent properties, improving the accuracy of PNHCDs as an optical monitoring code both in vitro and in vivo. The investigation of PNHCDs as an anticancer drug nanocarrier for doxorubicin (DOX) indicates a better antitumor efficacy than free DOX owing to its enhanced nuclear delivery in vitro and tumor accumulation in vivo, which results in highly effective tumor growth inhibition and improved targeted therapy for cancer in clinical medicine.

Elucidating the structure of carbon nanoparticles by ultra-performance liquid chromatography coupled with electrospray ionisation quadrupole time-of-flight tandem mass spectrometry.

A fast and accurate ultra-performance liquid chromatography coupled with electrospray ionisation quadrupole time-of-flight tandem mass spectrometry (UPLC-ESI-Q-TOF-MS/MS) method was developed for the separation and structural elucidation of fluorescent carbon nanoparticles (CNP). The CNP was synthesised from microwave-assisted pyrolysis of citric acid (CA) and 1,2-ethylenediamine (EDA). By using UPLC separation, the CNP product was well separated into ten fractions within 4.0 min. Based on high-accuracy MS and MS/MS analyses, the CNP species were revealed to display six kinds of chemical formulas, including (C10H20N4O5)n, (C8H12N2O5)n, (C16H22N4O9)n, (C6H8O7)n, (C14H18N2O11)n, and (C14H16N2O10)n. In particular, our study revealed for the first time that the CNP species exist as supramolecular clusters with their individual monomers units linked together through non-covalent bonding forces. These findings clearly indicated the usefulness of UPLC-ESI-Q-TOF-MS/MS in identifying the chemical composition of CNP product. It is anticipated that our proposed methodology can be applied to study the structure-property relationships of CNP, facilitating in the production of CNP with desirable spectral features.

UHPLC combined with mass spectrometric study of as-synthesized carbon dots samples.

A fast and green approach to synthesize carbon dots (C-dots) by microwave-assisted pyrolysis of precursor chitosan as the carbon source and glacial acetic acid as the condensation agent has been developed. Ultra-high performance liquid chromatography (UHPLC) has been applied to study C-dots samples prepared with various synthetic conditions including amount of chitosan, concentration of acetic acid and reaction time. All the as-prepared C-dots samples are complex mixtures of C-dots species which can be separated by UHPLC within 16 min. All the separated C-dots peaks display a distinctive absorption bands at 261-271 nm corresponding to the n→π* transition of C=O bond. The obtained chromatograms indicate the composition and complexity of an as-synthesized C-dots sample which is commonly neglected. In addition, high-performance liquid chromatography is employed to fractionate the C-dots sample. The separated C-dots fractions are collected and characterized by photoluminescence (PL) spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The PL spectra of the fractions display emission peaks at 427-446 nm upon excitation at 340 nm. The C-dots fractions are fully anatomized by MALDI-TOF MS, displaying their fragmentation mass ion features and indicating the surface functionalities of C-dots. The findings highlight the virtues of UHPLC to separate and reveal the unique characteristics of individual C-dots product which may have potential applications in the fields of bioanalysis, bioimaging, catalysis, chemosensing, energy storage, and optoelectronics device.

Sensitive determination of kaempferol using carbon dots as a fluorescence probe.

In this study, a new sensitive and convenient method for the determination of kaempferol (Kae) based on the fluorescence quenching of fluorescent carbon dots (C-dots) was developed. The C-dots were prepared by simply mixing acetic acid, water and diphosphorus pentoxide. This green synthesis approach proceeds rapidly and gives large quantities of C-dots. The fluorescence of the C-dots decreased obviously with the increase of Kae concentration. The effect of other interfering substances on the fluorescence intensity of C-dots showed low interference. Under the optimum conditions, a linear correlation was established between fluorescence intensity ratio Fo/F and the concentration of Kae in the range of 3.5-49 µM with a detection limit (S/N=3) of 38.4 nM. The proposed method has been successfully applied to determination of Kae in xindakang tablets and human serum samples with recovery in the range of 94.6-109.0%. The C-dots could be a promising fluorescence probe for the detection of Kae owing to its low-cost production, easy operation, low cytotoxicity, and excellent biocompatibility.

Capillary electrophoretic study of green fluorescent hollow carbon nanoparticles.

CE coupled with laser-induced fluorescence and UV absorption detections has been applied to study the complexity of as-synthesized green fluorescent hollow carbon nanoparticles (HC-NP) samples. The effects of pH, type, and concentration of the run buffer and SDS on the separation of HC-NP are studied in detail. It is observed that phosphate run buffer is more effective in separating the HC-NP and the optimal run buffer is found to be 30 mM phosphate and 10 mM SDS at pH 9.0. The CE separation of this HC-NP is based on the difference in size and electrophoretic mobility of HC-NP. Some selected HC-NP fractions are collected and further characterized by UV-visible absorption and photoluminescence (PL) spectroscopy, MS, and transmission electron microscopy. The fractionated HC-NP show profound differences in absorption, emission characteristics, and PL quantum yield that would have been otherwise misled by studying the complex mixture alone. It is anticipated that our CE methodology will open a new initiative on extensive studies of individual HC-NP species in the biomedical, catalysis, electronic, and optical device, energy storage, material, and sensing field.

Fluorescence quenching for chloramphenicol detection in milk based on protein-stabilized Au nanoclusters.

In the present study, we report a simple and rapid method for sensitive and selective determination of chloramphenicol (CAP) based on fluorescence of bovine serum albumin-stabilized Au nanoclusters (BSA-AuNCs). The BSA-AuNCs exhibit strong red emission. Upon addition of CAP to BSA-AuNCs, the fluorescence intensity of AuNCs shows a dramatic decrease attributing to the photo-induced electron transfer process from the electrostatically attached CAP to the BSA-AuNCs. The effects of pH, amount of BSA-AuNCs, temperature and reaction time on the detection of chloramphenicol were investigated. Under the optimal conditions, trace amounts of CAP could be detected. The linear working range is 0.10-70.00 µM with a detection limit 33 nM (S/N=3). In addition, the proposed method has been successfully applied to the detection of CAP in milk samples and largely improves the application of spectral method for quantitative analysis of CAP.