Palladium-modified TiO2 films in a photocatalytic microreactor: evaluation of radiation absorption properties and pollutant degradation efficiency.

Pure (TiO2) and 0.1 nominal atomic percent of palladium-modified TiO2 (Pd-TiO2) films were synthesized via a sol-gel method and compared through their physicochemical properties and photocatalytic activity in the degradation of an emerging contaminant, 17-α-ethinylestradiol (EE2). The activity of the films was studied using a continuous flow, planar microreactor under simulated sunlight. Catalysts characterization included X-ray diffraction, UV-Visible diffuse reflectance and transmittance spectroscopy, atomic force microscopy, transmission electron microscopy, Raman spectroscopy, N2 physisorption analysis, and X-ray photoelectron spectroscopy. The modification of TiO2 with palladium confined the size of anatase phase crystallites, increased the specific surface area and improved radiation absorption. PdO domains on TiO2 were observed. In all the tested conditions, higher conversion of EE2 was achieved with the Pd-TiO2 film compared with the TiO2 film, presenting an 80% increase in the reaction rate. The performance of the catalytic films was also assessed by the calculation of two efficiency parameters: radiation absorption efficiency and quantum efficiency of reaction. The Pd-TiO2 film showed a notable enhancement of the absorption of the incident radiation and a more efficient utilization of the absorbed photons to degrade the target pollutant.

Combination of sunlight, oxidants, and Ce-doped TiO2 for phenol degradation.

The degradation of phenol was used as a model reaction to investigate the photocatalytic properties of cerium-doped (0.1 nominal atomic percent) TiO2 catalysts in the presence and in the absence of oxidants: persulfate (PS) or hydrogen peroxide (HP). Experiments were performed in batch reactors using either artificial light (ultraviolet or visible) or solar exposure during spring-summer seasons in La Plata City (34.90° S, 57.92° W, 15 MASL). The formation of hydroquinone, catechol, and p-benzoquinone was observed in all the experiments. Additionally, for the experiments with PS (with or without catalyst), evidence of the formation of dimers and trimers was found. Total degradation of phenol (250 µM) was achieved with doped material and 7 mM of PS (two doses) after 3 h of solar exposure (H SUV, T = 2.9 ± 0.6 105 J m-2).

The influence of Ce doping of titania on the photodegradation of phenol.

Pure and cerium-doped [0.05, 0.1, 0.3, 0.5, and 1.0 Ce nominal atomic % (at.%)] TiO2 was synthesized by the sol-gel method. The obtained catalysts were characterized by X-ray diffraction (XRD), UV-visible diffused reflectance spectroscopy (DRS), Raman, and BET surface area measurement. The photocatalytic activity of synthesized samples for the oxidative degradation of phenol in aqueous suspension was investigated. The content of Ce in the catalysts increases both the transition temperature for anatase to rutile phase transformation and the specific surface area, and decreases the crystallite size of anatase phase, the crystallinity, and the band gap energy value. The material with higher efficiency corresponds to 0.1 Ce nominal at.%. Under irradiation with 350 nm lamps, the degradation of phenol could be described as an exponential trend, with an apparent rate constant of (9.1 ± 0.6) 10(-3) s(-1) (r(2) = 0.98). Hydroquinone was identified as the main intermediate.

Modulation of optical properties of dissolved humic substances by their molecular complexity.

In this study, we show that several UV-Vis absorbance, steady-state and time-resolved fluorescence parameters of a series of dissolved humic substances (DHS) from different sources (e.g. terrestrial fulvic and humic acids, and humic acid-like molecules extracted from composted and vermicomposted wastes) correlate with the molar absorptivity at 280 nm per mole of organic carbon (ε(280)), which in turn is proportional to the molecular complexity (e.g. molecular size, aromaticity and oxidation degree) of the DHS. Both absorbance and fluorescence spectral responses were sensitive to the molecular complexity associated with the maturation degree of the DHS. Depending on the DHS, different emitting responses by excitation at the UVA (340 nm) and VIS (460 nm) regions of the absorption spectra were observed. The results were explained in terms of the extent of intramolecular electronic interactions between electron donor groups, such as polyhydroxylated aromatics and indoles, and more oxidized acceptor groups (e.g. quinones or other oxidized aromatics) as the molecular complexity of the DHS increased.

Photolytic and radiolytic oxidation of humic acid.

The reactions of Br(2)(˙-), Br˙, HO˙ and N(3)˙ with Aldrich humic acid (AHA) were investigated. The Br/Br(2)(˙-) radicals were obtained in flash-photolysis experiments (λ(exc) = 266 nm) performed with NaS(2)O(8) solutions in the presence of bromide ions. HO˙ and N(3)˙ radicals were generated by pulse radiolysis of N(2)O-saturated solutions. From the combination of a bilinear analysis and computer simulations of the absorbance traces, it was possible to obtain information on the rate constants for the reactions of Br(2)(˙-), Br˙, HO˙ and N(3)˙ with AHA and on the intermediate species involved in the mechanism. Evidence for the participation of phenoxyl radicals (λ(max) = 410 nm) is given.