Industrial Routes from Sugars and Biomass to CMF and other 5-(Halomethyl)furfurals.

The synthesis of 5-(halomethyl)furfurals (XMFs, X = F, Cl, Br, I), including 5-(chloromethyl)furfural (CMF), 5-(bromomethyl)furfural (BMF), 5-(iodomethyl)furfural (IMF), and 5-(fluoromethyl)furfural (FMF), from biomass represents a pivotal advancement in renewable chemistry and engineering. Harnessing waste biomass as a raw material offers a sustainable alternative to fossil-based resources, mitigating environmental degradation and addressing pressing energy needs. CMF and BMF, characterized by their enhanced stability over the hydroxyl analog, 5-(hydroxymethyl)furfural (HMF), exhibit promise as renewable building blocks for scale-up and commercialization. The surge in research interest, particularly from 2010 to 2024, reflects a growing recognition of XMFs' potential as novel platform chemicals. This review highlights the evolution of XMF synthesis methods, focusing on their transformation from saccharides and lignocellulosic biomass. Mechanistic insights and experimental setups are scrutinized for industrial feasibility and scalability, shedding light on technical challenges and avenues for further research. The analysis underscores the burgeoning significance of XMFs in the transition towards sustainable chemical production, emphasizing the importance of process optimization and mechanistic understanding for commercial deployment.

Pseudocannabinoid H4CBD improves glucose response during advanced metabolic syndrome in OLETF rats independent of increase in insulin signaling proteins.

Cannabidiol (CBD) use has grown exponentially more popular in the last two decades, particularly among older adults (>55 yr), though very little is known about the effects of CBD use during age-associated metabolic dysfunction. In addition, synthetic analogues of CBD have generated great interest because they can offer a chemically pure product, which is free of plant-associated contaminants. To assess the effects of a synthetic analogue of CBD (H4CBD) on advanced metabolic dysfunction, a cohort of 41-wk-old Otsuka Long-Evans Tokushima Fatty (OLETF) rats were administered 200 mg H4CBD/kg by oral gavage for 4 wk. Animals were fed ad libitum and monitored alongside vehicle-treated OLETF and Long-Evans Tokushima Otsuka (LETO) rats, the lean-strain controls. An oral glucose-tolerance test (oGTT) was performed after 4 wk of treatment. When compared with vehicle-treated, OLETF rats, H4CBD decreased body mass (BM) by 15%, which was attributed to a significant loss in abdominal fat. H4CBD reduced glucose response (AUCglucose) by 29% (P < 0.001) and insulin resistance index (IRI) by 25% (P < 0.05) compared with OLETF rats. However, H4CBD did not statically reduce fasting blood glucose or plasma insulin, despite compensatory increases in skeletal muscle native insulin receptor (IR) protein expression (54%; P < 0.05). H4CBD reduced circulating adiponectin (40%; P < 0.05) and leptin (47%; P < 0.05) and increased ghrelin (75%; P < 0.01) compared with OLETF. Taken together, a chronic, high dose of H4CBD may improve glucose response, independent of static changes in insulin signaling, and these effects are likely a benefit of the profound loss of visceral adiposity.NEW & NOTEWORTHY Cannabis product use has grown in the last two decades despite the lack of research on Cannabidiol (CBD)-mediated effects on metabolism. Here, we provide seminal data on CBD effects during age-associated metabolic dysfunction. We gave 41-wk-old OLETF rats 200 mg H4CBD/kg by mouth for 4 wk and noted a high dose of H4CBD may improve glucose response, independent of static changes in insulin signaling, and these effects are likely a benefit of loss of visceral adiposity.

Electrochemical Incorporation of Electrophiles into the Biomass-Derived Platform Molecule 5-(Chloromethyl)furfural.

The 5-(chloromethyl)furfural (CMF) derivative ethyl 5-(chloromethyl)furan-2-carboxylate undergoes two-electron electrochemical reduction in a simple, undivided cell to give the corresponding furylogous enolate anion, which can either be quenched with carbon dioxide to give a 5-(carboxymethyl)furan-2-carboxylate or with hydrogen ion to give a 5-methylfuran-2-carboxylate, thereby expanding the derivative scope of CMF as a biobased platform molecule.

Cannabidiol Does Not Impair Anabolic Signaling Following Eccentric Contractions in Rats.

Cannabidiol (CBD) has proven clinical benefits in the treatment of seizures, inflammation, and pain. The recent legalization of CBD in many countries has caused increased interest in the drug as an over-the-counter treatment for athletes looking to improve recovery. However, no data on the effects of CBD on the adaptive response to exercise in muscle are available. To address this gap, we eccentrically loaded the tibialis anterior muscle of 14 rats, injected them with a vehicle (n = 7) or 100 mg/kg CBD (n = 7), and measured markers of injury, inflammation, anabolic signaling, and autophagy 18 hr later. Pro-inflammatory signaling through nuclear factor kappa B (NF-kB) (Ser536) increased with loading in both groups; however, the effect was significantly greater (36%) in the vehicle group (p < .05). Simultaneously, anabolic signaling through ribosomal protein S6 kinase beta-1 (S6K1) (Thr389) increased after eccentric contractions in both groups with no difference between vehicle and CBD (p = .66). The ribosomal protein S6 phosphorylation (240/244) increased with stimulation (p < .001) and tended to be higher in the CBD group (p = .09). The ubiquitin-binding protein p62 levels were not modulated by stimulation (p = .6), but they were 46% greater in the CBD compared with the vehicle group (p = .01). Although liver weight did not differ between the groups (p = .99) and levels of proteins associated with stress were similar, we did observe serious side effects in one animal. In conclusion, an acute dose of CBD decreased pro-inflammatory signaling in the tibialis anterior without blunting the anabolic response to exercise in rats. Future research should determine whether these effects translate to improved recovery without altering adaptation in humans.

Anion Exchange Doping: Tuning Equilibrium to Increase Doping Efficiency in Semiconducting Polymers.

High electron affinity (EA) molecules p-type dope low ionization energy (IE) polymers, resulting in an equilibrium doping level based on the energetic driving force (IE-EA), reorganization energy, and dopant concentration. Anion exchange doping (AED) is a process whereby the dopant anion is exchanged with a stable ion from an electrolyte. We show that the AED level can be predicted using an isotherm equilibrium model. The exchange of the dopant anion (FeCl3-) for a bis(trifluoromethanesulfonamide) (TFSI-) anion in the polymers poly(3-hexylthiophene-2,5-diyl) (P3HT) and poly[3-(2,2-bithien-5-yl)-2,5-bis(2-hexyldecyl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione-6,5-diyl] (PDPP-2T) highlights two cases in which the process is nonspontaneous and spontaneous, respectively. For P3HT, FeCl3 provides a high doping level but an unstable counterion, so exchange results in an air stable counterion with a marginal increase in doping. For PDPP-2T, FeCl3 is a weak dopant, but the exchange of FeCl3- for TFSI- is spontaneous, so the doping level increases by >10× with AED.

Diversification of the Renewable Furanic Platform via 5-(Chloromethyl)furfural-Based Carbon Nucleophiles.

Biobased 5-(chloromethyl)furoate and 5-methylfuroate esters can be deprotonated to function as furylogous lithium enolates, and the former can also undergo zinc insertion to access Reformatsky-type chemistry. Carbon nucleophilicity represents hitherto little-explored reactivity in these key carbohydrate-derived platform molecules, expanding their synthetic utility and potentially opening up new sustainable product markets (e. g., in epoxy resins or biobased dyes).

Effects of Methyl Branching on the Properties and Performance of Furandioate-Adipate Copolyesters of Bio-Based Secondary Diols.

Furandioate-adipate copolyesters are an emerging class of bio-based biodegradable polymers with great potential to replace fossil-derived terephthalic acid-based copolyesters such as poly(butylene adipate-co-terephthalate) (PBAT). Furandioate-adipate polyesters have almost exclusively been prepared with conventional primary (1°) alcohol diols, while secondary (2°) alcohol diol monomers have largely been overlooked until now, despite preliminary observations that using methyl-branched diols increases the T g of the resultant polyesters. Little is known of what impact the use of 2° alcohol diols has on other properties such as material strength, hydrophobicity, and rate of enzymatic hydrolysis-all key parameters for performance and end-of-life. To ascertain the effects of using 2° diols on the properties of furandioate-adipate copolyesters, a series of polymers from diethyl adipate (DEA) and 2,5-furandicarboxylic acid diethyl ester (FDEE) using different 1° and 2° alcohol diols was prepared. Longer transesterification times and greater excesses of diol (diol/diester molar ratio of 2:1) were found to be necessary to achieve M ws > 20 kDa using 2° alcohol diols. All copolyesters from 2° diols were entirely amorphous and exhibited higher T gs than their linear equivalents from 1° diols. Compared to linear poly(1,4-butyleneadipate-co-1,4-butylenefurandioate), methyl-branched, poly(2,5-hexamethyleneadipate-co-2,5-hexamethylenefurandioate) (0:7:0.3 furandioate/adipate ratio) displayed both higher modulus (67.8 vs 19.1 MPa) and higher extension at break (89.7 vs 44.5 mm). All other methyl-branched copolyesters displayed lower modulus but retained higher extension at break compared with their linear analogues. Enzymatic hydrolysis studies using Humicola insolens cutinase revealed that copolyesters from 2° alcohol diols have significantly decreased rates of biodegradation than their linear equivalents synthesized using 1° alcohol diols, allowing for fine-tuning of polymer stability. Hydrophobicity, as revealed by water contact angles, was also found to generally increase through the introduction of methyl branching, demonstrating potential for these materials in coatings applications.

In Silico Design of Cylindrophanes: The Role of Functional Groups in a Fluoride Selective Host.

Molecular recognition is the key driver in the formation of supramolecular complexes, enabling the selective encapsulation of specific guests. Here, we explore the delicate balance between different energetic terms in the formation of an efficient host for fluoride anions based on a cylindrophane structure, which can be achieved by the incorporation of ligand sites into a cyanuric acid based cyclophane framework, resulting a close proximity between the ammonium hydrogens and the anion. This study describes the character and contribution of different energetic and repulsive terms that favor the efficient inclusion of fluoride. Our findings are useful for further rational design and synthesis of efficient and highly selective fluoride hosts, which have been generally less well described than complexing agents for other halides.

Across the Board: Mark Mascal on the Challenges of Lignin Biorefining.

In this series of articles, the board members of ChemSusChem discuss recent research articles that they consider of exceptional quality and importance for sustainability. This entry features Prof. M. Mascal, who describes some creative solutions to the challenge of lignin biorefining and shares thoughts about how the purposes of sustainability are best served. Topics discussed include lignin saturation and hydrodeoxygenation, lignin isolation, a lignin to muconic acid pathway, and the production of 2,4- and 2,5-pyrinedicarboxylic acids from lignin.

Butenolide Derivatives of Biobased Furans: Sustainable Synthetic Dyes.

The dye and pigment manufacturing industry is one of the most polluting in the world. Each year, over one million tons of petrochemical colorants are produced globally, the synthesis of which generates a large amount of waste. Naturally occurring, plant-based dyes, on the other hand, are resource intensive to produce (land, water, energy), and are generally less effective as colorants. Between these two extremes would be synthetic dyes that are fully sourced from biomass-derived intermediates. The present work describes the synthesis of such compounds, containing strong chromophores that lead to bright colors in the yellow to red region of the visible spectrum. The study was originally motivated by an early report of an unidentified halomethylfurfural derivative which resulted from hydrolysis in the presence of barium carbonate, now characterized as a butenolide of 5-(hydroxymethyl)furfural (HMF). The method has been generalized for the synthesis of dyes from other biobased platform molecules, and a mechanism is proposed.

High-mobility, trap-free charge transport in conjugated polymer diodes.

Charge transport in conjugated polymer semiconductors has traditionally been thought to be limited to a low-mobility regime by pronounced energetic disorder. Much progress has recently been made in advancing carrier mobilities in field-effect transistors through developing low-disorder conjugated polymers. However, in diodes these polymers have to date not shown much improved mobilities, presumably reflecting the fact that in diodes lower carrier concentrations are available to fill up residual tail states in the density of states. Here, we show that the bulk charge transport in low-disorder polymers is limited by water-induced trap states and that their concentration can be dramatically reduced through incorporating small molecular additives into the polymer film. Upon incorporation of the additives we achieve space-charge limited current characteristics that resemble molecular single crystals such as rubrene with high, trap-free SCLC mobilities up to 0.2 cm2/Vs and a width of the residual tail state distribution comparable to kBT.

Synthetic, non-intoxicating 8,9-dihydrocannabidiol for the mitigation of seizures.

There can be a fine line between therapeutic intervention and substance abuse, and this point is clearly exemplified in herbal cannabis and its products. Therapies involving cannabis have been the treatment of last resort for some cases of refractory epilepsy, and this has been among the strongest medical justifications for legalization of marijuana. In order to circumvent the narcotic effects of Δ9-tetrahydrocannabinol (THC), many studies have concentrated on its less intoxicating isomer cannabidiol (CBD). However, CBD, like all natural cannabinoids, is a controlled substance in most countries, and its conversion into THC can be easily performed using common chemicals. We describe here the anticonvulsant properties of 8,9-dihydrocannibidiol (H2CBD), a fully synthetic analogue of CBD that is prepared from inexpensive, non-cannabis derived precursors. H2CBD was found to have effectiveness comparable to CBD both for decreasing the number and reducing the severity of pentylenetetrazole-induced seizures in rats. Finally, H2CBD cannot be converted by any reasonable synthetic route into THC, and thus has the potential to act as a safe, noncontroversial drug for seizure mitigation.

A Zwitterionic, 10 π Aromatic Hemisphere.

A new concept in anionic 10 π aromaticity is described by the embedding of a compensating charge within an aromatic cyclononatetraenide ring by the symmetric superposition of an alkyl ammonium bridge. This is accomplished by the methylation of azatriquinacene to give a quaternary ammonium salt, followed by oxidation to the tetraene and final deprotonation. The resulting zwitterion is a stable [9]annulene with strong aromaticity as shown by its degree of C-C bond equalization and a nucleus-independent chemical shift value lower than that of benzene. The solid-state structure shows an eclipsed stacking motif with the electron-poor ammonium methyl groups occupying the electron-rich cavity of the aromatic bowl.

New bio-based monomers: tuneable polyester properties using branched diols from biomass.

A family of monomers, including 2,5-hexandiol, 2,7-octandiol, 2,5-furandicarboxylic acid (FDCA), terephthalic acid (TA), and branched-chain adipic and pimelic acid derivatives, all find a common derivation in the biomass-derived platform molecule 5-(chloromethyl)furfural (CMF). The diol monomers, previously little known to polymer chemistry, have been combined with FDCA and TA derivatives to produce a range of novel polyesters. It is shown that the use of secondary diols leads to polymers with higher glass transition temperatures (Tg) than those prepared from their primary diol equivalents. Two methods of polymerisation were investigated, the first employing activation of the aromatic diacids via the corresponding diacid chlorides and the second using a transesterification procedure. Longer chain diols were found to be more reactive than the shorter chain alternatives, generally giving rise to higher molecular weight polymers, an effect shown to be most pronounced when using the transesterification route. Finally, novel diesters with high degrees of branching in their hydrocarbon chains are introduced as potential monomers for possible low surface energy materials applications.

Electrochemical Coupling of Biomass-Derived Acids: New C8 Platforms for Renewable Polymers and Fuels.

Electrolysis of biomass-derived carbonyl compounds is an alternative to condensation chemistry for supplying products with chain length >C6 for biofuels and renewable materials production. Kolbe coupling of biomass-derived levulinic acid is used to obtain 2,7-octanedione, a new platform molecule only two low process-intensity steps removed from raw biomass. Hydrogenation to 2,7-octanediol provides a chiral secondary diol largely unknown to polymer chemistry, whereas intramolecular aldol condensation followed by hydrogenation yields branched cycloalkanes suitable for use as high-octane, cellulosic gasoline. Analogous electrolysis of an itaconic acid-derived methylsuccinic monoester yields a chiral 2,5-dimethyladipic acid diester, another underutilized monomer owing to lack of availability.

Crystal structure determination as part of an undergraduate laboratory experiment: 1',3',3'-tri-methyl-spiro-[chromene-2,2'-indoline] and 1',3',3'-trimethyl-4-[(E)-(1,3,3-tri-methyl-indolin-2-yl-idene)meth-yl]spiro-[chroman-2,2'-indoline].

The crystal structures of the title compounds, C19H19NO and C31H34N2O, were determined as part of an experiment in an undergraduate teaching laboratory that demonstrates the relationship between mol-ecular structure and function. 1',3',3'-Tri-methyl-spiro-[chromene-2,2'-indoline] is both a photoswitch and thermochromic mol-ecule. Students synthesized it and a bis-indoline adduct and compared the crystallographically determined structures to computed gas-phase models.