Exploring the restorative benefits of work in smart working structures on vacations in small villages.

Introduction: Processes of redefinition of work, already in place in the pre-pandemic era, with the advent of COVID-19, have become widely required. A "model of work" that uses new technologies and the development of existing ones to improve workers' performance and satisfaction has emerged. Smart working has changed how people work and, as a result, spaces must also change to support them. The use of prefabricated movable buildings (PMB) could represent an opportunity to create smart (and co-) working spaces in a regenerative contest. Small villages with historical, architectural, and naturalistic elements and slow-life features are potential platforms where vacation and work could merge easily. This paper aims to establish if working in movable offices, like the PMBs, which provide a high level of visual and acoustics interaction with the surroundings, and which is positioned in small villages' squares, can affect workers' sense of restoration and working performance. Methods: In a laboratory setting, in the SENS i-Lab, a videowall and a 3D spatial audio system were used to compare, in terms of restorativeness and self-reported cognitive performance, the effects of a high-rise building context of a City Business District (CBD), i.e. the control scenario, and of two typical squares of small Italian villages with historic buildings, without (HIS) and with water elements (HIS-W). Results: The findings of the experimental sessions showed that when working in close contact (visual and auditory) with historical or water elements, where life flows slowly, workers perceived a higher sense of restoration while job performance was unchanged. Discussion: Implementing smart working policies in small villages that encourage the use of energy-efficient prefabricated movable buildings and that offer a high level of visual and acoustic interaction with the surrounding environment may represent a promising strategy to foster the development of the local economy and contrast the depopulation of small villages, improving the worker well-being and the reducing the impact of their activities of the environment.

Assessment of the Performance of a Portable, Low-Cost and Open-Source Device for Luminance Mapping through a DIY Approach for Massive Application from a Human-Centred Perspective.

Ubiquitous computing has enabled the proliferation of low-cost solutions for capturing information about the user's environment or biometric parameters. In this sense, the do-it-yourself (DIY) approach to build new low-cost systems or verify the correspondence of low-cost systems compared to professional devices allows the spread of application possibilities. Following this trend, the authors aim to present a complete DIY and replicable procedure to evaluate the performance of a low-cost video luminance meter consisting of a Raspberry Pi and a camera module. The method initially consists of designing and developing a LED panel and a light cube that serves as reference illuminance sources. The luminance distribution along the two reference light sources is determined using a Konica Minolta luminance meter. With this approach, it is possible to identify an area for each light source with an almost equal luminance value. By applying a frame that covers part of the panel and shows only the area with nearly homogeneous luminance values and applying the two systems in a dark space in front of the low-cost video luminance meter mounted on a professional reference camera photometer LMK mobile air, it is possible to check the discrepancy in luminance values between the low-cost and professional systems when pointing different homogeneous light sources. In doing so, we primarily consider the peripheral shading effect, better known as the vignetting effect. We then differentiate the correction factor S of the Radiance Pcomb function to better match the luminance values of the low-cost system to the professional device. We also introduce an algorithm to differentiate the S factor depending on the light source. In general, the DIY calibration process described in the paper is time-consuming. However, the subsequent applications in various real-life scenarios allow us to verify the satisfactory performance of the low-cost system in terms of luminance mapping and glare evaluation compared to a professional device.

Effects of spatialized water-sound sequences for traffic noise masking on brain activities.

Informational masking of water sounds has been proven effective in mitigating traffic noise perception with different sound levels and signal-to-noise ratios, but less is known about the effects of the spatial distribution of water sounds on the perception of the surrounding environment and corresponding psychophysical responses. Three different spatial settings of water-sound sequences with a traffic noise condition were used to investigate the role of spatialization of water-sound sequences on traffic noise perception. The neural responses of 20 participants were recorded by a portable electroencephalogram (EEG) device during the spatial sound playback time. The mental effects and attention process related to informational masking were assessed by the analysis of the EEG spectral power distribution and sensor-level functional connectivity along with subjective assessments. The results showed higher relative power of the alpha band and greater alpha-beta ratio among water-sound sequence conditions compared to traffic noise conditions, which confirmed the increased relaxation on the mental state induced by the introduction of water sounds. Moreover, different spatial settings of water-sound sequences evoked different cognitive network responses. The setting of two-position switching water brought more attentional network activations than other water sequences related to the information masking process along with more positive subjective feelings.

Wearable Devices for Environmental Monitoring in the Built Environment: A Systematic Review.

The so-called Internet of Things (IoT), which is rapidly increasing the number of network-connected and interconnected objects, could have a far-reaching impact in identifying the link between human health, well-being, and environmental concerns. In line with the IoT concept, many commercial wearables have been introduced in recent years, which differ from the usual devices in that they use the term "smart" alongside the terms "watches", "glasses", and "jewellery". Commercially available wearables aim to enhance smartphone functionality by enabling payment for commercial items or monitoring physical activity. However, what is the trend of scientific production about the concept of wearables regarding environmental monitoring issues? What are the main areas of interest covered by scientific production? What are the main findings and limitations of the developed solution in this field? The methodology used to answer the above questions is based on a systematic review. The data were acquired following a reproducible methodology. The main result is that, among the thermal, visual, acoustic, and air quality environmental factors, the last one is the most considered when using wearables even though in combination with some others. Another relevant finding is that of the acquired studies; in only one, the authors shared their wearables as an open-source device, and it will probably be necessary to encourage researchers to consider open-source as a means to promote scalability and proliferation of new wearables customized to cover different domains.

Assessment of noise exposure for basketball sports referees.

Dosimetric measurements carried out on basketball referees have shown that whistles not only generate very high peak sound pressure levels, but also play a relevant role in determining the overall exposure to noise of the exposed subjects. Because of the peculiar geometry determined by the mutual positions of the whistle, the microphone, and the ear, experimental data cannot be directly compared with existing occupational noise exposure and/or action limits. In this article, an original methodology, which allows experimental results to be reliably compared with the aforementioned limits, is presented. The methodology is based on the use of two correction factors to compensate the effects of the position of the dosimeter microphone (fR) and of the sound source (fS). Correction factors were calculated by means of laboratory measurements for two models of whistles (Fox 40 Classic and Fox 40 Sonik) and for two head orientations (frontal and oblique).Results sho w that for peak sound pressure levels the values of fR and fS, are in the range -8.3 to -4.6 dB and -6.0 to -1.7 dB, respectively. If one considers the Sound Exposure Levels (SEL) of whistle events, the same correction factors are in the range of -8.9 to -5.3 dB and -5.4 to -1.5 dB, respectively. The application of these correction factors shows that the corrected weekly noise exposure level for referees is 80.6 dB(A), which is slightly in excess of the lower action limit of the 2003/10/EC directive, and a few dB below the Recommended Exposure Limit (REL) proposed by the National Institute for Occupational Safety and Health (NIOSH). The corrected largest peak sound pressure level is 134.7 dB(C) which is comparable to the lower action limit of the 2003/10/EC directive, but again substantially lower than the ceiling limit of 140 dB(A) set by NIOSH.

Auditory recognition of familiar and unfamiliar subjects with wind turbine noise.

Considering the wide growth of the wind turbine market over the last decade as well as their increasing power size, more and more potential conflicts have arisen in society due to the noise radiated by these plants. Our goal was to determine whether the annoyance caused by wind farms is related to aspects other than noise. To accomplish this, an auditory experiment on the recognition of wind turbine noise was conducted to people with long experience of wind turbine noise exposure and to people with no previous experience to this type of noise source. Our findings demonstrated that the trend of the auditory recognition is the same for the two examined groups, as far as the increase of the distance and the decrease of the values of sound equivalent levels and loudness are concerned. Significant differences between the two groups were observed as the distance increases. People with wind turbine noise experience showed a higher tendency to report false alarms than people without experience.

The effects of vision-related aspects on noise perception of wind turbines in quiet areas.

Preserving the soundscape and geographic extension of quiet areas is a great challenge against the wide-spreading of environmental noise. The E.U. Environmental Noise Directive underlines the need to preserve quiet areas as a new aim for the management of noise in European countries. At the same time, due to their low population density, rural areas characterized by suitable wind are considered appropriate locations for installing wind farms. However, despite the fact that wind farms are represented as environmentally friendly projects, these plants are often viewed as visual and audible intruders, that spoil the landscape and generate noise. Even though the correlations are still unclear, it is obvious that visual impacts of wind farms could increase due to their size and coherence with respect to the rural/quiet environment. In this paper, by using the Immersive Virtual Reality technique, some visual and acoustical aspects of the impact of a wind farm on a sample of subjects were assessed and analyzed. The subjects were immersed in a virtual scenario that represented a situation of a typical rural outdoor scenario that they experienced at different distances from the wind turbines. The influence of the number and the colour of wind turbines on global, visual and auditory judgment were investigated. The main results showed that, regarding the number of wind turbines, the visual component has a weak effect on individual reactions, while the colour influences both visual and auditory individual reactions, although in a different way.

The influence of visual characteristics of barriers on railway noise perception.

Noise annoyance is considered as the main effect of noise, it is a complex and multifaceted psychological concept dealing with immediate behavioral and evaluative aspects. In the last decades the research has intensely investigated the correlation between noise exposure and noise annoyance, nevertheless recent studies confirm that non-auditory factors influence the noise perception of individuals. In particular audio-video interaction can play a fundamental role. Today Immersive Virtual Reality (IVR) systems allow building laboratory test providing realistic experiences of the surrounding environment to detect more accurate information about the reactions of the local population. Regarding the interventions for environmental noise control the barriers represent the main solution; however some aspects related to their visual characteristic have to be further investigated. This paper presented a case study, where a sample of residents living close to a railway line assessed noise-related aspects for several barriers with different visual characteristics in an IVR laboratory test. In particular, three main factors were analyzed: the barrier type concerning the visibility of the noise source through the screen, the visual aspect of the barrier concerning some aesthetic issues and the noise level at the receiver concerning the acoustic performance of the barrier and the magnitude of the sound source. The main results of the ANOVA analysis showed that for transparent barriers Perceived Loudness and Noise Annoyance were judged lower than for opaque barriers; this difference increased as noise level increased.

Individual reactions to a multisensory immersive virtual environment: the impact of a wind farm on individuals.

The aim of this study was to assess the impact of a wind farm on individuals by means of an audio-visual methodology that tried to simulate biologically plausible individual-environment interactions. To disentangle the effects of auditory and visual components on cognitive performances and subjective evaluations, unimodal (Audio or Video) and bimodal (Audio + Video) approaches were compared. Participants were assigned to three experimental conditions that reproduced a wind farm by means of an immersive virtual reality system: bimodal condition, reproducing scenarios with both acoustic and visual stimuli; unimodal visual condition, with only visual stimuli; unimodal auditory condition, with only auditory stimuli. While immersed in the virtual scenarios, participants performed tasks assessing verbal fluency, short-term verbal memory, backward counting, and distance estimations (egocentric: how far is the turbine from you?; allocentric: how far is the turbine from the target?). Afterwards, participants reported their degree of visual and noise annoyance. The results revealed that the presence of a visual scenario as compared to the only availability of auditory stimuli may exert a negative effect on resource-demanding cognitive tasks but a positive effect on perceived noise annoyance. This supports the idea that humans perceive the environment holistically and that auditory and visual features are processed in close interaction.