Patterned apoptosis has an instructive role for local growth and tissue shape regulation in a fast-growing epithelium.

What regulates organ size and shape remains one fundamental mystery of modern biology. Research in this area has primarily focused on deciphering the regulation in time and space of growth and cell division, while the contribution of cell death has been overall neglected. This includes studies of the Drosophila wing, one of the best-characterized systems for the study of growth and patterning, undergoing massive growth during larval stage and important morphogenetic remodeling during pupal stage. So far, it has been assumed that cell death was relatively neglectable in this tissue both during larval stage and pupal stage, and as a result, the pattern of growth was usually attributed to the distribution of cell division. Here, using systematic mapping and registration combined with quantitative assessment of clone size and disappearance as well as live imaging, we outline a persistent pattern of cell death and clone elimination emerging in the larval wing disc and persisting during pupal wing morphogenesis. Local variation of cell death is associated with local variation of clone size, pointing to an impact of cell death on local growth that is not fully compensated by proliferation. Using morphometric analyses of adult wing shape and genetic perturbations, we provide evidence that patterned death locally and globally affects adult wing shape and size. This study describes a roadmap for precise assessment of the contribution of cell death to tissue shape and outlines an important instructive role of cell death in modulating quantitatively local growth and morphogenesis of a fast-growing tissue.

Microtubule disassembly by caspases is an important rate-limiting step of cell extrusion.

The expulsion of dying epithelial cells requires well-orchestrated remodelling steps to maintain tissue sealing. This process, named cell extrusion, has been mostly analysed through the study of actomyosin regulation. Yet, the mechanistic relationship between caspase activation and cell extrusion is still poorly understood. Using the Drosophila pupal notum, a single layer epithelium where extrusions are caspase-dependent, we showed that the initiation of cell extrusion and apical constriction are surprisingly not associated with the modulation of actomyosin concentration and dynamics. Instead, cell apical constriction is initiated by the disassembly of a medio-apical mesh of microtubules which is driven by effector caspases. Importantly, the depletion of microtubules is sufficient to bypass the requirement of caspases for cell extrusion, while microtubule stabilisation strongly impairs cell extrusion. This study shows that microtubules disassembly by caspases is a key rate-limiting step of extrusion, and outlines a more general function of microtubules in epithelial cell shape stabilisation.

A Review of the Developmental Processes and Selective Pressures Shaping Aperture Pattern in Angiosperms.

Pollen grains of flowering plants display a fascinating diversity of forms. The observed diversity is determined by the developmental mechanisms involved in the establishment of pollen morphological features. Pollen grains are generally surrounded by an extremely resistant wall displaying apertures that play a key role in reproduction, being the places at which pollen tube growth is initiated. Aperture number, structure, and position (collectively termed 'aperture pattern') are determined during microsporogenesis, which is the earliest step of pollen ontogeny. Here, we review current knowledge about aperture pattern developmental mechanisms and adaptive significance with respect to plant reproduction and how advances in these fields shed light on our understanding of aperture pattern evolution in angiosperms.

Multiple Influences of Mechanical Forces on Cell Competition.

Cell competition is a widespread process leading to the expansion of one cell population through the elimination and replacement of another. A large number of genetic alterations can lead to either competitive elimination of the mutated population or expansion of the mutated cells through the elimination of the neighbouring cells. Several processes have been proposed to participate in the preferential elimination of one cell population, including competition for limiting extracellular pro-survival factors, communication through direct cell-cell contact, or differential sensitivity to mechanical stress. Recent quantitative studies of cell competition have also demonstrated the strong impact of the shape of the interfaces between the two populations. Here, we discuss the direct and indirect contribution of mechanical cues to cell competition, where they act either as modulators of competitive interactions or as direct drivers of cell elimination. We first discuss how mechanics can regulate contact-dependent and diffusion-based competition by modulating the shape of the interface between the two populations. We then describe the direct contribution of mechanical stress to cell elimination and competition for space. Finally, we discuss how mechanical feedback also influences compensatory growth and triggers preferential expansion of one population.

Quantitative Morphological Variation in the Developing Drosophila Wing.

Quantitative genetic variation in morphology is pervasive in all species and is the basis for the evolution of differences among species. The measurement of morphological form in adults is now beginning to be combined with comparable measurements of form during development. Here we compare the shape of the developing wing to its adult form in a holometabolous insect, Drosophila melanogaster We used protein expression patterns to measure shape in the developing precursors of the final adult wing. Three developmental stages were studied: late larval third instar, post-pupariation and in the adult fly. We studied wild-type animals in addition to mutants of two genes (shf and ds) that have known effects on adult wing shape and size. Despite experimental noise related to the difficulty of comparing developing structures, we found consistent differences in wing shape and size at each developmental stage between genotypes. Quantitative comparisons of variation arising at different developmental stages with the variation in the final structure enable us to determine when variation arises, and to generate hypotheses about the causes of that variation. In addition we provide linear rules allowing us to link wing morphology in the larva, with wing morphology in the pupa. Our approach provides a framework to analyze quantitative morphological variation in the developing fly wing. This framework should help to characterize the natural variation of the larval and pupal wing shape, and to measure the contribution of the processes occurring during these developmental stages to the natural variation in adult wing morphology.

Aperture number influences pollen survival in Arabidopsis mutants.

PREMISE OF THE STUDY: Pollen grains are subject to intense dehydration before dispersal. They rehydrate after landing on a stigma or when placed in humid environment by absorbing water from the stigma or surroundings. Resulting fluctuations in water content cause pollen grains to undergo significant changes in volume. Thus, morphological or structural adaptations might exist to help pollen adjust to sudden volume changes, though little is known about the correlation between pollen morphology and its ability to accommodate volume changes. We studied the effect of one morphological feature of pollen grains, the aperture number, on pollen wall resistance to water inflow in Arabidopsis thaliana. METHODS: We used three Arabidopsis thaliana mutants that differ in the number of apertures in their pollen (zero, four, or a mix of four to eight, respectively) and the wild type with pollen with three apertures. We tested pollen survival in solutions with various mannitol concentrations. KEY RESULTS: The number of intact pollen grains increased with increasing mannitol concentration for all pollen morphs tested. At a given mannitol concentration, however, an increase in aperture number was associated with an increase in pollen breakage. CONCLUSIONS: Aperture patterns, i.e., number, shape, and position, influence the capacity to accommodate volume variations in pollen grains. When subjected to water inflow, pollen grains with few apertures survive better than pollen with many apertures. Trade-offs between survival and germination are likely to be involved in the evolution of pollen morphology.

Evolutionary stasis in pollen morphogenesis due to natural selection.

The contribution of developmental constraints and selective forces to the determination of evolutionary patterns is an important and unsolved question. We test whether the long-term evolutionary stasis observed for pollen morphogenesis (microsporogenesis) in eudicots is due to developmental constraints or to selection on a morphological trait shaped by microsporogenesis: the equatorial aperture pattern. Most eudicots have three equatorial apertures but several taxa have independently lost the equatorial pattern and have microsporogenesis decoupled from aperture pattern determination. If selection on the equatorial pattern limits variation, we expect to see increased variation in microsporogenesis in the nonequatorial clades. Variation of microsporogenesis was studied using phylogenetic comparative analyses in 83 species dispersed throughout eudicots including species with and without equatorial apertures. The species that have lost the equatorial pattern have highly variable microsporogenesis at the intra-individual and inter-specific levels regardless of their pollen morphology, whereas microsporogenesis remains stable in species with the equatorial pattern. The observed burst of variation upon loss of equatorial apertures shows that there are no strong developmental constraints precluding variation in microsporogenesis, and that the stasis is likely to be due principally to selective pressure acting on pollen morphogenesis because of its implication in the determination of the equatorial aperture pattern.

Patterned Anchorage to the Apical Extracellular Matrix Defines Tissue Shape in the Developing Appendages of Drosophila.

How tissues acquire their characteristic shape is a fundamental unresolved question in biology. While genes have been characterized that control local mechanical forces to elongate epithelial tissues, genes controlling global forces in epithelia have yet to be identified. Here, we describe a genetic pathway that shapes appendages in Drosophila by defining the pattern of global tensile forces in the tissue. In the appendages, shape arises from tension generated by cell constriction and localized anchorage of the epithelium to the cuticle via the apical extracellular-matrix protein Dumpy (Dp). Altering Dp expression in the developing wing results in predictable changes in wing shape that can be simulated by a computational model that incorporates only tissue contraction and localized anchorage. Three other wing shape genes, narrow, tapered, and lanceolate, encode components of a pathway that modulates Dp distribution in the wing to refine the global force pattern and thus wing shape.

Making quantitative morphological variation from basic developmental processes: Where are we? The case of the Drosophila wing.

One of the aims of evolutionary developmental biology is to discover the developmental origins of morphological variation. The discipline has mainly focused on qualitative morphological differences (e.g., presence or absence of a structure) between species. Studies addressing subtle, quantitative variation are less common. The Drosophila wing is a model for the study of development and evolution, making it suitable to investigate the developmental mechanisms underlying the subtle quantitative morphological variation observed in nature. Previous reviews have focused on the processes involved in wing differentiation, patterning and growth. Here, we investigate what is known about how the wing achieves its final shape, and what variation in development is capable of generating the variation in wing shape observed in nature. Three major developmental stages need to be considered: larval development, pupariation, and pupal development. The major cellular processes involved in the determination of tissue size and shape are cell proliferation, cell death, oriented cell division and oriented cell intercalation. We review how variation in temporal and spatial distribution of growth and transcription factors affects these cellular mechanisms, which in turn affects wing shape. We then discuss which aspects of the wing morphological variation are predictable on the basis of these mechanisms. Developmental Dynamics 244:1058-1073, 2015. © 2015 Wiley Periodicals, Inc.

Formation and function of a new pollen aperture pattern in angiosperms: The proximal sulcus of Tillandsia leiboldiana (Bromeliaceae).

Pollen grains are generally surrounded by an extremely resistant wall interrupted in places by apertures that play a key role in reproduction; pollen tube growth is initiated at these sites. The shift from a proximal to distal aperture location is a striking innovation in seed plant reproduction. Reversals to proximal aperture position have only very rarely been described in angiosperms. The genus Tillandsia belongs to the Bromeliaceae family, and its aperture pattern has been described as distal monosulcate, the most widespread aperture patterns recorded in monocots and basal angiosperms. Here we report developmental and functional elements to demonstrate that the sulcate aperture in Tillandsia leiboldiana is not distal as previously described but proximal. Postmeitotic tetrad observation indicates unambiguously the proximal position of the sulcus, and in vitro germination of pollen grains confirms that the aperture is functional. This is the first report of a sulcate proximal aperture with proximal germination. The observation of microsporogenesis reveals specific features in the patterns of callose thickenings in postmeiotic tetrads.